Used Bbt Eccentric Press for sale (12,729)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 4,000 t, stroke length: 180 mm, throat depth: 500 mm, overall weight: 28,000 kg, controller model: Siemens S7-300, The machine underwent a major overhaul in 2007! The following modifications were carried out on the single-column eccentric press PEE 400: Conversion of the press drive to an adjustable drive with 15-45 strokes of the press ram Conversion of the clutch and brake to a pneumatically actuated Ortlinghaus clutch-brake combination Adjustment of the pinion shaft, flywheel, and bearing cover to the pneumatically actuated clutch-brake combinations Replacement of the rolling bearings for the pinion shaft and flywheel bearing Replacement of all sealing elements and wear parts for the drive Replacement of the seals for the compensator cylinder Replacement of the V-belts for the flywheel drive Replacement of the entire electrical control system Installation of a stroke adjustment mechanism Modification of the safety device Mounting of a tie rod to reduce frame deflection under press force Replacement of the worm gear for ram adjustment, pressure spindle, spindle nut, and pressure ring Refurbishment of the ram guide rails Replacement of the die plate and its support Hydraulics Pneumatics Lubrication Hydraulic pull-down cushion in the press table Tool mounting arms for attaching the press tool Tool lever strips in the table TECHNICAL DETAILS Pressing force: 4,000 kN Adjustable stroke: 30–180 mm Adjustable stroke rate per minute (continuous operation): 15–45 /min Ram adjustment: 150 mm Overhang: 500 mm Ram area (width × depth): 1,200 × 800 mm Table area (width × depth): 1,600 × 1,000 mm Maximum distance between table and ram area: 625 mm MACHINE DETAILS Nlodpfjzmfnqjx Adrsd Control: Siemens S7-300 Motor power: 55 kW Motor speed: 1,500 rpm Hydraulic pull-down cushion Piston diameter: 110 mm Piston rod diameter: 90 mm Effective piston area: 95 cm² Pull-down cushion diameter: 230 mm Adjustable counterforce: 10–250 kN Usable pull-down cushion stroke: 90 mm Speed of the pull-down cushion during extension: max. 65 mm/s Hydraulic system Flow rate of the pull-down cushion pump: 29 l/min Drive power of the main pump: 7.5 kW Oil capacity in the tank: 250 l Flow rate of the circulation pump: 65 l/min Drive power of the circulation pump: 1.5 kW Operating pressure for clutch and brake: 5 bar Operating pressure for ram weight compensation: 5 bar Total machine weight: 28,000 kg

Condition: excellent (used), Eccentric press Nledpszpbvpefx Adrjd Inventory No. 3920 Manufacturer: Rijva Type 504 Pressing force: 40 tons * Stroke adjustment: 15 to 75 mm * Adjustable ram stroke: 60 mm * Installation height: 310 mm * Overhang: 225 mm * Table surface: 570 x 430 mm * Foot pedal operation * Central lubrication * Machine weight: approx. 2600 kg In very good condition.

Condition: excellent (used), Eccentric press Inventory no. 3919 Manufacturer: Weingarten Type: XOR 2 Press force: 75 tons * Stroke adjustment: 10 to 100 mm * Adjustable ram: 60 mm * Installation height: 360 mm * Overhang: 270 mm * Table area: 630 x 600 mm Nlsdpfxezpbvis Adrod * Foot-operated * Machine weight: approx. 4500 kg In very good condition.

Condition: good (used), Year of construction: 1981, Machine parameters: Rated forming force: 250 t Stroke: 45 mm Nlodpfx Ajzpxziedrsd Description: The machine is in good technical condition; testing can be arranged upon prior agreement. Dimensions: 2580 x 1350 x 2975 mm Power requirement: 22 kW Czech documentation Machine weight: 12,880 kg

Condition: used, Year of construction: 1975, functionality: fully functional, power: 33.1 kW (45.00 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 60 t, stroke length: 140 mm, throat depth: 280 mm, We are offering this used Osterholt EXPA 60 eccentric press, manufactured in 1975, for sale. Nodpfxozlgz Ns Adrjld Machine number: 873368 Type: EXPA 60 Pressing capacity: 60,000 kg Stroke length: 280 mm Minimum ram height: 100 mm Adjustable ram: 60 mm Adjustable stroke: 10–140 mm Motor power: 45 hp Mains voltage: 380 V If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2000, gebraucht 2000 070165A prompt, Zwischenverkauf v Italien 19800 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm 800 mm Nodpfeyrhpvox Adrjld 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2004, pressure 25 t Nledpfoykb D Djx Adrod throat 375 mm stroke 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 3,5 kW weight of the machine ca. 2,8 t

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm stroke 8 - 80 mm Nlodpoykb Dksfx Adred no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t

Condition: good (used), Manufacturer: DIGÉP Nodpfjm Uc R Aex Adreld Tip: SD 100

Condition: used, Russian manufacturing, Max. pressing force: 25 t Nodpfxjxbf Sfj Adrsld Table size: 550 x 400 mm

Condition: used, Year of construction: 1974, machine/vehicle number: 4139, functionality: fully functional, pressing force: 80 t, stroke length: 140 mm, table width: 530 mm, table length: 750 mm, ram plate width: 335 mm, ram plate length: 440 mm, Equipment: documentation/manual, For sale is a robust eccentric press from Beutler Maschinenbau with approximately 80 tons of pressing force. The machine is ideally suited for punching and forming operations. Specifications: • Table area: approx. 750 x 530 mm • Ram area: approx. 440 x 335 mm Nljdpfozb Eaqex Adrjd • Ram adjustment: approx. 150 mm • Stroke: adjustable from 20 – 140 mm • Max. installation height: approx. 320 mm • Table opening: approx. Ø 230 mm Sold without warranty, ex works. The machine will be delivered without electrical power and compressed air connection. Payment before collection.

Condition: excellent (used), Eccentric press Inventory no. 3341 Manufacturer: Ter Hart Type: EP 13 * Pressing force: 13 tons * Stroke adjustment: 5 - 50 mm * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 200 mm * Overhang: 115 mm Nledszi Erhepfx Adrod * Foot/hand operation (guard) * Protective guard (hand) * Weight: 520 kg

Condition: excellent (used), Eccentric press Inventory no. 3584 Manufacturer: ter Hart/Gosmeta Type: EP 6 * Pressing force: 6 tons * Stroke adjustment: 5 - 42 mm * Adjustable ram stroke: 30 mm * Table dimensions: 280 x 190 mm Nlsdszi Eptspfx Adred * Installation height: 190 mm * Overhang: 95 mm * Foot pedal operation * Weight: 360 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 00789901, This press line, featuring an ERFURT press, type PKZZI 800.1/3150x1600/500E, as well as a roller feed/material conveyor and alignment device, will be auctioned online as part of our industrial auction/machine auction – site closure of J&S GmbH Automotive Technology – Presses and Metalworking. You can find this and many other items on our platform. Njdpfxszk H Rnj Adrjld Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture: approx. 1989, 8000 kN, last service: 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min/-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture: 2011 with coil 1 (sandwich processing), SAWAB coil, year of manufacture: 2011 with coil 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture: 2011 with coil 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial number: M2011-00170, year of manufacture: 2011 including enclosure GWS - Project No.: 2011 - 60187 with peripherals: - Conveyor belt - Raziol system Function and technical data have not been tested. Without further items/without further accessories, unless explicitly stated as part of the lot. WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! Subject to change This lot will be auctioned subject to change. After the auction has ended, the seller will notify within 2 weeks whether the highest bid will be accepted or not. We will inform you as soon as possible.

Condition: used, Year of construction: 2003, machine/vehicle number: CO5223, overall weight: 199,000 kg, This press line, featuring a MANZONI eccentric press, type T6302MR/2/12/TE, as well as a coil feed/material conveyor and straightening device, will be auctioned off in our industrial auction/machine auction (location closure of J&S GmbH Automotive Technology - Presses and Metalworking), online. You can find this and many other items on our platform. Further machine information: MANZONI T6302MR/2/12/TE, eccentric press, year of manufacture 2003, SN: CO5223, with SIMATIC HMI control, last maintenance 10/2025, machine was in operation until 12/2025 Technical data of the MANZONI press according to the nameplate: Nominal force - 6,300 kN Nsdpfx Adjzk H Iyerold Nominal stroke before and after TDC 12.7 mm Max. tool dimension 4000x1700 mm Max. tool upper part weight 13,500 kg Flywheel speed G/1' 660 Stroke rate min-max C/1' 10-45 Max. clutch cycles 15 Ram stroke min-max 0-600 mm Ram adjustment 200 mm Installation height 1100 mm Dwell time 0.6 sec Safety distance 815 mm Weight 199,000 kg Coil feed system consisting of: GSW Schwabe, Type: MHR5/1500 SN: M 2018 - 00981, Year of manufacture 2018 GSW Schwabe, Type: LMHR 1000 SN: M 2018 - 00982, Year of manufacture 2018 PBK unwinder, Type: EV 120/800, max. load capacity 10,000 kg SN: BA00862, Year of manufacture 2003 including hydraulic unit, enclosure and roller conveyor GSW - Project No.: 2018-60025 with additional peripherals: - Control cabinets - Lubrication system Function and technical data are unverified without further items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change This lot will be auctioned off subject to change. After the auction has ended, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you promptly.

Condition: used, Year of construction: 2015, machine/vehicle number: M01365/400/23/038/14, This Schuler eccentric press MC4000 will be auctioned online as part of our industrial auction / machine auction, location closure J&S GmbH Automotive Technology - Presses and Metalworking. You will find this and many other items on our platform. Schuler Beutler, Type: Eccentric Press MC4000, Serial No.: M01365/400/23/038/14, Year of Manufacture: 2015, 4000kN, last service 10/2025, machine was in operation until 12/2025 Technical data of the press according to the nameplate: Mains voltage: 3LNPE/400V/50Hz Control system: CCS/PNOZmulti Fuse rating: 250 A Rated power: 75 kW Rated force: 4,000 kN Work capacity: 60,000 J max. strokes in continuous operation: 20-80 min/-1 max. strokes in single stroke: 30 min/-1 max. clutch cycles in single stroke per minute: 20 After-running time: 0.207 sec min. safety distance: 332 mm min./max. clutch pressure: 5.0/6.0 bar System pressure: 8.0 bar Stroke lengths: 40-315 mm maximum punch adjustment: 200 mm usual connection point of the punch: OU max. installation space, largest stroke in UU: 750 mm Table dimensions: 3000 x 1500 mm max. tool dimensions: 3000 x 1300 mm max. weight of tool upper part: 3,000 kg Weight without additional equipment: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, GSW Schwabe, Type: RMA 50/78, Zehnder & Sommer, Type: EV 520 AGM including enclosure and roller conveyor Year of manufacture: 2015 GWS - Project No.: 2014 - 60376 with peripherals: - HIESSL lubricant system - RAZIOL EST-10D/ELS-4000 - RAZIOL DOS SPR EBAD-4000KL / Lama 1000 HL - GÜTHLE CT10/2500 pair, maximum load capacity per pair 10,000 kg Function and technical data are unverified without further items/without further accessories, unless explicitly mentioned as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! Nedpfxjzk Hycs Adrsld Subject to change This lot will be auctioned subject to change. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you promptly.

Condition: used, Year of construction: 2019, machine/vehicle number: M01645/400/23/051/19, This SCHULER eccentric press MC 400 will be auctioned online as part of our industrial auction / machinery auction due to the closure of the J&S GmbH Automotive Technology - Presses and Metalworking site. You will find this and many other items on our platform. Further machine data: Schuler, Type: Eccentric press MC400, Machine No. M01645/400/23/051/19, Year of manufacture 2019, 4000 kN Technical data of the press according to the nameplate: Mains voltage: 3LNPE/400V/50Hz Control: CCS/PNOZmulti Fuse rating 250 A Rated power 75 kW Rated force 4,000 kN Working capacity 60,000 J max. strokes in continuous operation 20-80 min/-1 max. strokes in single stroke 30 min/-1 max. clutch cycles in single stroke per minute: 20 After-run time 0.20 s min. safety distance 322 mm min./max. clutch pressure 5.5/6.0 bar System pressure 6.0 bar Stroke lengths 40-315 mm maximum punch adjustment 200 mm usual connection point of the punch: OU max. installation space, largest stroke in UU: 750 mm Table dimensions 3000 x 1400 mm max. tool dimensions 3000 x 1300 mm max. weight of the upper tool part: 2,800 kg Weight without additional equipment: 72,000 kg Strip feed system consisting of: GSW Schwabe, Type: MHR 5/2000, SN: M 2018-01118, Year of manufacture 2019 GSW Schwabe, Type: RMA 50/79, SN: M 2018-01119, Year of manufacture 2019 including hydraulic unit, enclosure and roller conveyor GSW project no.: 2018-60420 Nedpfjzk Hr Esx Adreld with peripherals: - SCHÄFER lubricant supply system with tank - RAZIOL EST-10-D ELS-400, year of manufacture 2018 - Conveyor belt - GÜTHLE ACT10F2000/2400N set of 2, year of manufacture 2019 - Control cabinet Function and technical data not checked without further items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change This lot will be auctioned subject to change. After the auction closes, the seller will notify within 2 weeks whether the highest bid will be accepted or not. We will inform you promptly.

Condition: used, Elektrische Exzenterpresse / Electric Eccentric Press Komex Eccentric Die Cutting Machine Nodpjyt H Ndsfx Adrold Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Machine package loaded into a 40-foot open-top container Nodpsx Sxfpjfx Adrjld . Eccentric press MÜLLER 60 T . Eccentric press MÜLLER 100 T . Eccentric press EBU 75 T

Condition: good (used), Year of construction: 1963, functionality: fully functional, Weight: 7,000 kg Pressing pressure: 180 t Nedpezlg Tljfx Adreld Spindle press machine Weingarten P 160 Manufacturer / Year of production: Weingarten A.G. / 1963 Type / Serial number: P 160 / 715/61 Electrical connection: 400 V / 10 kW Maximum stroke: 350 mm Minimum stroke: 120 mm Clamping surface: 600 x 600 mm Comment: The press is equipped with a mechanical safety system, is still in operation, and can be tested. Documentation is available.

Condition: good (used), Year of construction: 1960, functionality: fully functional, Weingarten Eccentric Press ER 80 – 80 tons – Year of manufacture 1960 For sale is a robust WEINGARTEN eccentric press, type ER 80, manufactured in Germany. Technical specifications: Manufacturer: Maschinenfabrik Weingarten A.-G. Type: ER 80 Pressing force: 80 tons Stroke rate: 60 strokes/min Adjustable ram stroke: 8–112 mm Ram adjustment: 80 mm Year of manufacture: 1960 The machine is in used condition, commensurate with its age. Ideal for metalworking, stamping, and forming operations. Nlsdpfx Adezkhnnorjd Inspection possible by arrangement. Sale from the current location; the seller will handle loading, and the buyer will organize transport.

Condition: used, Year of construction: 1980, For sale is a robust mechanical eccentric press / stamping press from the manufacturer MGR. The machine is ideally suited for punching, forming, and pressing operations in the metalworking industry and comes from industrial use. Nledpjy Unmbefx Adrod Technical data: Manufacturer: MGR Type: 45R Year of manufacture: 1980 Pressing force: 45,000 kg (45 tons) Stroke: 230 mm Ram stroke: 80 mm Ram adjustable: 55 mm Adjustable stroke: 9 – 120 mm Motor power: 3.5 hp Voltage: 380 V Machine no.: 311860

Condition: excellent (used), Year of construction: 1990, Single-action eccentric press ERL 125 HELMERDING 1990. Nsdpfjzlb Hmex Adreld

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 315 t, stroke length: 300 mm, Equipment: CE marking, Table dimensions (x-y/mm)  2150 x 1200 Nledpfozi Rbbex Adrjd Ram dimensions X-Y (mm)  2000 x 1200 Stroke (mm)  300 Slide adjustment (mm)  200 Strokes per minute  5 - 50 Side window dimensions (x-y/mm)  800

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Nljdpozkmi Defx Adrod Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.