Used Beck Maschinenbau Gmbh Utk 350 for sale (72,471)

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar Hfsdpfxofhbuyj Aqgon - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, load capacity: 800 kg, - Stationary scissor lift table with single scissors - Steel perforated grid plate System 16 - Platform size: 2000x1000x100 mm - Hole spacing: 50 mm - Hole diameter: 16 mm - 360-degree rotary platform beneath the grid plate - Grid system with 4 stops every 90 degrees - Lift up/down operated by a hand control with 3 m cable Hjdpfxexazzyj Aqgsfn - Battery-hydraulic drive - Load capacity: 700 kg - Construction height: 670 +/- 60 mm - Useful lift: 700 mm - Maximum height: 1370 +/- 60 mm - Own weight: approx. 810 kg - Stationary version with 4 base plates.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds Hfjdpfez Agw Ejx Aqgsn - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: Hodpfx Aqoz Ag Rrjgjfn - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Hfsdjz Agv Uepfx Aqgen - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Hedpfxjzz Rpco Aqgofn - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: as good as new (ex-display), Year of construction: 2023, Technical description with the following main data: Load capacity 3000 kg static line load effective stroke 1100 mm Overall height 250 mm Total height 1350 mm Platform length 1700 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 29 sec. for the full effective stroke Lowering time depending on load Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 2.2 kW, 1,400 rpm. Valve voltage 24 V DC Hsdpeupztzsfx Aqgjfn Sealing class IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 455 kg Floor frame for moving with pallet truck or forklift

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. The set includes: - CAB label printer - Feed hopper - Acceleration conveyor - Weighing machine - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Product weight: up to 1 kg (possible calibration) Hedpfsy Hiyaex Aqgofn Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Condition: as good as new (ex-display), Year of construction: 2008, *SALE WITHOUT ROLLER CONVEYOR Technical description with the following main data: Load capacity 1000 kg static line load effective stroke 830 mm Overall height 180 mm Total height 1010 mm Platform length 1300 mm Platform width 800 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 0.75 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP65 Hjdeupzwaspfx Aqgjfn Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 175 kg* incl. limit switch and thermal fuse up to 2.2 kW motor - Switch for up/down and manual operation is integrated in the control box

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,020 mm, construction height: 410 mm, lifting height: 600 mm, empty load weight: 150 kg, load capacity: 350 kg, total length: 1,900 mm, total width: 740 mm, warranty duration: 24 months, NIVEAU - HS 350 Large lifting table without work surface Description: ᐳ Mobile scissor lift table with double horizontal scissors, basic model without work surface; with platform base frame for mounting various work surfaces; 4 swivel casters, 2 of which have brakes; wheel diameter 125 mm; operation via foot pump Hfsdpoh A Hxisfx Aqgon Load capacity in kg: 350 Weight in kg: 150 Useful lifting height in mm: 610 Overall height in mm: 400 Total height in mm: 1010 Platform size in mm: 1900 x 740

Condition: as good as new (ex-display), Year of construction: 2021, - Mobile scissor lift table with a single-scissor mechanism - With a smooth metal sheet platform, WITHOUT a sliding bar - The lifting mechanism (up/down) is operated via a hydraulic foot pump - Load capacity: 1200 kg - Overall height: 450 mm - Lifting height: 700 mm - Maximum height: 1150 mm Hfodpfxjfnnayj Aqgen - Platform size: 2000 mm x 1000 mm - Weight: 420 kg - 2 swivel casters with brakes, 2 fixed casters without brakes - Wheel diameter: 150 mm - Powder-coated finish: base frame and platform frame in light gray RAL 7035, scissors in violet-blue RAL 5000

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Hedjzilz Njpfx Aqgsfn Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: new, Year of construction: 2024, Under-table cross-cut saw UTK-600 also with a pneumatic vertical front protective shield Execution according to the new current PLC safety control ltd. Of the new machinery directive Technical specifications: - Motor power 7.5 kW S1 Hsdpef Sqy Dsfx Aqgsfn - Max. Saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Speed ​​on the saw shaft: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Necessary air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Saw blade feed pneumatic drive - * NEW two-hand safety PLC control - Automatic engine brake - Set of operating keys - Emergency stop button - Speed ​​regulator for saw blade feed - Fixed vertical protection - Upper safety pressure device (pneumatic protective hood) - suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: new, Year of construction: 2024, functionality: fully functional, Technical description with the following key data: Load capacity: 1000 kg static line load Useful stroke: 775 mm Overall height: 85 mm Total height: 860 mm Platform length: 1450 mm Platform width: 1140 mm Material: Smooth sheet metal Lifting time: approx. 20 sec. for the full useful stroke Hedpfx Aeiwi Ineqgjfn Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 4-meter cable Motor: 1.1 kW Paint finish: Blue-grey RAL 7031 Unit placement: freestanding Control box: Dead man’s control incl. 2 m cable Total weight: approx. 270 kg Standard version: The lifting tables comply with EN 1570 E and are marked with the CE symbol. The steel parts are cleaned, primed with rust-protective paint, and painted with a two-component polyurethane paint. The lifting tables are equipped as standard with all-round safety cut-off strips made of aluminum and with mounting supports for repair and servicing. Our lifting tables are designed for approximately 5 lifting cycles per hour with full load in 8 hours per day. For more intensive operation, we offer special lifting tables.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, Lift table with a built-in chain conveyor. Load capacity 3 tons. Platform size approx. 3200 x1200mm. Technical description : Single scissor lift table type TT3000Bsp. - 3000Kg load Hedpfefhbupsx Aqgjfn - useful stroke 1600mm - Height 350mm - platform approx. 3200 x1200mm - Hydraulic unit drive with 2.2 KW motor - Switch up / down with manual switch Chain conveyor with 3 conveyor chains installed on the lifting table. - Length about 3200mm - Distance of the outer chains is 1100mm. - Drive gear motor SEW 1.1 KW - Drive is installed under the lifting platform. - Conveyor chains 3 x 1½ "roller chain German quality - conveyor speed approx. 7m / min - Stable cover plates between the conveyor chains, accessible, closed form. - Electrical switching manually via manual button dead man's switch, with function forwards / backwards. - Construction height about 300mm. Base frame substructure with adjustable feet can therefore be driven under with forklift forks. Overall height: approx. 750 mm 1 pc = Lifting table + chain conveyor + floor frame.

Condition: as good as new (ex-display), Year of construction: 2024, available in various lengths upon request - Length 3000 mm with 3 support feet - Roller track with scale, manual measuring system with adjustable and foldable length stop, incl. reading magnifying glass - Roller and measuring track for lighter plastic, aluminum, and steel profiles - The max. measuring length is the track length minus 250 mm Hfsdpfxjgrn U So Aqgsn - Support rollers, roller diameter 50x1.5mm, galvanized steel tube - Axle diameter 8mm - Track width 390 mm, usable roller width 300mm - Load-bearing capacity per meter of roller track approx. 100 kg/m - Support roller spacing approx. 290 mm - Track height adjustable from 770-1070 mm - All parts are painted, color silver-grey RAL 7042, feet anthracite-grey RAL 7016

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Hsdpszpgh Dsfx Aqgsfn Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, good condition. Capacity: Up to 3000 products /h Hfsdpfx Aoylurkoqgen Product dimensions: Length: 160 - 400 mm, Height: 50 - 150 mm Power input: 5 kW Air: 6,0 bar Ready to ship

Condition: as good as new (ex-display), Year of construction: 2024, - Mobile scissor lift table with single scissors Hfsdpfjfhbv Tsx Aqgsn - with smooth sheet metal plate and push handle - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 500 kg - Construction height 400 mm - Useful stroke 540 mm - Maximum height 940 mm - Platform size 1100 mm x 700 mm - Dead weight 148 kg - 2 swivel castors with brakes, 2 fixed castors without brakes - Wheel Ø 150 mm - Powder coating lacquer floor frame and platform frame light gray RAL 7035, scissors in violet blue RAL 5000

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. This machine is characterized by an extremely robust mechanical basic structure and is ideal for production facilities, workshops, or as a perfect foundation for a modernization project. Hfodpozni Rxjfx Aqgjn Technical data (according to the nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly table Machine No.: BA 659 00 Year of manufacture: Electrical connection: 380 V (CEE plug available) Pneumatic connection: 6 bar "Everything from a single source: We will gladly offer you suitable financing for your project." You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Hsdpfx Aezvx Dkjqgofn Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: refurbished (used), - Longitudinal/transverse arrangement with manual and automatic transmission - Accepts Euro pallets in both longitudinal and transverse directions - Load capacity: 1300 kg - Basic dimensions: 1430 mm wide, 1670 mm long, 1854 mm high Hedpfjiyyvhox Aqgofn - Design: mobile - Lifting range: minimum height 80 mm, maximum height 1030 mm, lifting stroke 950 mm - Color: light gray RAL 7035, completely - Power connection: 440 V - 50 Hz, 1.5 or 2.2 kW - Weight: 490 kg

Condition: new, Year of construction: 2024, - Frame and edge press, single-sided/stationary - Usable dimensions in mm as a frame press: 2630 x 1610 - Usable dimensions in mm as an edge press: 3000 x 1610 - External dimensions in mm: 3200 x 2090 x 730 - Sturdy frame welded construction made of thick-walled profile tubes and laser-cut steel sheet parts ensures a torsion-resistant and dimensionally accurate press frame (no screwed frame parts!) - With left-hand counter bearing, sliding carriage for width adjustment, central locking system, and 2 manual hydraulic press units with ergonomic handles. - 3 roller-bearing, vertical pressure beams, type SK, made of thick-walled profile tube, galvanized, with manual hydraulic press units incl. ergonomic handle. 20,000 N pressing force, 60 mm stroke. Press units adjustable in a 50 mm hole grid. - Counter bearing at the bottom with safety lock, adjustable in 5 steps in the hole grid Hedehd Nywepfx Aqgofn - Lower clamp with spindle pressure - Chassis with 4 swivel casters (2 with brakes) - Powder-coated (glue-resistant) gray-white RAL 9002, pressure plate and counter bearing cornflower blue RAL 5010 - The Quattra 1-SK version is equipped with a comfortable adjustment system for the manual hydraulic press units, providing additional safety for the operator.

Condition: as good as new (ex-display), Year of construction: 2024, - Edge and frame press, single-sided/stationary - Gluing stand without frame pressing mechanism - Usable dimensions in mm as edge press: 2900 x 1600 - Usable dimensions in mm as frame press: 2600 x 1600 (with option QJ 002) - External dimensions in mm: 3100 x 700 x 2150 mm (L x W x H) - 3 roller-bearing-mounted, vertical pressure beams with robust bevel gear and counter bearing - Press stroke: 150 mm, pressing force: 2000 kg - Frame pressing mechanism with left-hand counter bearing - Sliding carriage for width adjustment, with central locking system - 2 horizontal bevel gears - Pressure beam with spindle pressure - Chassis with 4 swivel casters (2 of which are braked) - Paint finish: RAL 9002 grey-white, pressure plate and counter bearing RAL 5010 gentian blue Hedpfxjhd N Eqj Aqgjfn

Condition: good (used), Year of construction: 2011, 2x Mobile conveyor systems for unloading trucks/swap bodies, etc. – used: Price per unit, ex works: only €950 (net), including loading! If both systems are purchased, we will add a non-powered roller conveyor! Approx. 4 x 3 m, with feet for easy movement! One system consists of 2 belt conveyors (powered) and a roller conveyor that can be connected/extended. Of course, only one belt conveyor and the roller conveyor can also be used, etc. Manufacturer: SRD Maschinenbau GmbH Type: Mobile conveyor system Year of manufacture: 07.2011 SERIAL NUMBER: 3447 Element width: approx. 80 cm Belt width: approx. 65 cm Hsdpfxoz Dtino Aqgefn Length of belt element: 4.10 m Length of roller conveyor: approx. 5 m Total length when all 3 elements are assembled: approx. 13 m! Roller diameter approx. 5 cm, roller length approx. 60 cm Height: approx. 75 cm Connection values: 400V/50Hz 16A Condition: good Available: immediately Location: Hamburg