Used Beck Schrumpftunnel Hv 400 for sale (18,070)

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Passage width: 400 mm Passage height: 130 mm Hood length: 1,000 mm Conveyor length: 1,860 mm Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Itjdpfx Adoy H Dxkjkjg Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Additional equipment: Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, total length: 1,860 mm, total height: 1,400 mm, total width: 950 mm, Thermal Shrink Tunnel HV 401 LD - Used unit, year of manufacture approx. 1998 - Tested and operational The high-performance shrink tunnel is built in an energy-saving design. Thanks to its flexible heating system and adjustable settings, the machine can reliably shrink-wrap products of various contours with film. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable top and bottom heat. It is equipped with an electronic temperature control system and is designed for a maximum internal temperature of up to 250°C. The conveyor speed is infinitely adjustable. Technical data Passage width: 400 mm Passage height: 150 mm Hood length: 1,700 mm Conveyor length: 2,100 mm Rod conveyor: covered with Teflon mesh (as shown in the photos) Power supply: 380 V three-phase, 50 Hz Ijdpoy H Dtuefx Adkotg Heating capacity: adjustable from 2 – 10 kW Rated connected load: 12 kW Color: light grey hammer finish Additional equipment: Temperature control with electronic controller and contactless relay for precise temperature stability

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 19 kW (25.83 HP), input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), heating capacity: 18 kW (24.47 HP), Beck Packautomaten HV601 HPLS Year of manufacture: 2008 Pass-through width: 600 mm Pass-through height: 420 mm with pressure rollers at the outfeed Isdpey H Ddasfx Adketg Transport rods: 15 mm with 19 mm silicone coating Rod pitch (center to center): 38 mm Hood length: 1700 mm Overall length: approx. 2100 mm Conveyor speed: infinitely adjustable Connected load: 19 kW As shown in the photos

Condition: ready for operation (used), Year of construction: 2010, A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible. Itodpjy Hvrvjfx Adkeg

Condition: ready for operation (used), Year of construction: 1994, A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible. Ijdoyk Hb Ujpfx Adkstg

Condition: ready for operation (used), HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment. Itjdpfxsxt Rk Rj Adkjg

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 11115, Foiling machine for PE foil for profiles Iodsxght Aepfx Adkjtg

Condition: new, Year of construction: 2017, Exhibition machine Year of manufacture 2017 (was not yet in use for production) The Compact Star is a pneumatic gluing starwheel with 5 gluing levels. gluing levels. The rotary movement is effected by a pneumatic drive with safety safety grid. Each level has 4 pcs. movable vertical clamps with vertical clamps with adjustable counter bearing. Each vertical clamp is equipped with a hold-down rail. Furthermore, each level has 2 pcs. adjustable horizontal pressure beams with counter bearing. Maximum clamping dimensions: Vertical: 960 mm Horizontal: 1335 mm Material thickness: 50mm Dimensions: Length 2700 mm Width 3117 mm Iodpokwg Szjfx Adketg Height 3096 mm Availability: short term Location: Röllbach

Condition: used, Year of construction: 2005, serial number 1106479 400 Itodpsyn R Nqsfx Adkeg miter ja cooling ja

Condition: excellent (used), 1.- Plate size Ø 400 mm 2.- Centre bore Itodpfxehq Ukls Adksg 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR

Condition: used, Year of construction: 2000, O F F E R We can offer you, without obligation and subject to prior sale and errors, the following ex stock: H U G O – B E C K Flow Wrapping Machine Type FLEXO 400 Year of manufacture: approx. 2000 Serial no. 12131 _____ Working height: 850 mm Product dimensions: 55-400 mm width 2-150 mm height 80-unlimited mm length Isdjwugmtjpfx Adkjtg Max. output: 20 m/min 60 cycles/min Machine length: 2000 mm Machine width: 1450 mm Connected load: 3 kW Packaging films: PP, PE, Polyolefin Weight: 650 kg Machine dimensions: 2,140 x 1,450 mm Accessories / Special equipment: • Cross-sealing unit with permanently heated profile sealing element for long service life and secure seals • Side sealing unit, mechanically controlled, permanently heated sealing element for stable seals • Extremely short changeover times without tools • User-friendly control elements • Compact footprint We would also like to point out that, if interested, we have similar packaging machines in stock on site! Condition : Very good Please click here shortly for a video of the machine: Delivery : Ex stock - as inspected Payment : Net - after receipt of invoice

Year of construction: 2002, condition: ready for operation (used), Nominal voltage: 400V, connected load: 3kW, with roller conveyor, an inspection is possible. Iodsnucnuopfx Adkstg

Condition: excellent (used), We have a BECK HV600 shrinktunnel available. This machine is ready after complete maintenance and is working like new! Itodpfxohcdhlj Adksg The measurements are in the pictures.

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: D 2319867, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2008. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Itodpfxstpgxzj Adksg Packaging and loading included.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: D 2402263, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2009. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Isdpfx Astp Tklsdketg Packaging and loading included.

Condition: used, Year of construction: 1996, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Itodpfx Aewnhnfedkeg Year: 1996 Bed-dimensions: 4500x800mm X-travel: 4000mm Y-travel: 935mm Z-travel: 1000mm Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 11676-FBZ - Drive system: CNC - Number of axes [pcs]: 3 - X-axis travel [mm]: 4000 - Y-axis travel [mm]: 935 - Z-axis travel [mm]: 1000 - Table length [mm]: 4500 - Table width [mm]: 800 - Tool holder: ISO50 - Max. spindle speed [rpm]: 3000 - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, all stainless steel Itodpfxoy Ichmj Adkjg mobile with outfeed conveyor belt width 400 mm dimensions: (L x W x H): ± 2.390 x 800 x 2.285 mm power 13 kW weight 850 kg

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Itjdpfx Aovvtx Tsdksg Hopper: No Core pull: Yes

Condition: used, Year of construction: 2006, We offer a complete STORK line for industrial loading, molding, wet and dry coating of food products such as nuggets, burgers, fish sticks or vegetable cutlets. The STORK molding and coating line combines high efficiency, precision and reliability, making it an excellent choice for modern production facilities. STORK line: 1. Lifting and Tilting Machine (Lifting and Tilting Unit) Manufacturer: STORK Model: THK 1730-2210 TAD0103 Year of manufacture: 2006 Type: 477913 2. Forming machine (Plater Former) Manufacturer: STORK Model: THV 400 E65 TA2107 Year of manufacture: 2006 Type: 4779132 3. Wet Breading Machine (Battering Machine) Manufacturer: STORK Model: TEM 400 TD1104 Ijdowpkhkspfx Adketg Year of manufacture: 2006 Type: 4779115 4. Dry Breading Machine (Breading Machine) Manufacturer: MAREL Model: TPM 400 TD2104 Year of manufacture: 2016 Type: 4279225 Advantages of STORK molding and breading line: Integrated production system – from molding to finished coating, the line runs smoothly and consistently. High productivity and precision – ideal for mass production of breaded products. Flexibility of application – for meat, poultry, fish, as well as vegetarian and vegan products. Robust design – best quality, resistant to intensive use. Ready to work – machines fully operational, possibility of testing and presentation. All equipment is manufactured by reputable brands, known for their high-quality solutions for the food industry.

Condition: new, functionality: fully functional, New, fully functional Becker U4.400SA/K vacuum pumps for sale, with a 6-month warranty. We have 2 units available. Iodjyzmyyepfx Adkstg Worldwide shipping available – request a quote! If you need vacuum pumps, accessories, or any vacuum-related equipment, do not hesitate to reach out. We are happy to assist with sourcing, technical advice, or custom solutions.

Condition: ready for operation (used), Year of construction: 2011, Industrial PC without cable Iodpfxjinumlj Adkstg

Condition: used, Year of construction: 2010, tank capacity 400 l working pressure 35 U,210 bar feed pressure / bar weight 900 kg Iodpjm Sk Rgjfx Adkjtg required space 1,72 x 1,00 x 1,81 m

Condition: used, functionality: unexamined, Ferwood Code: RU0011693 - Manufacturer Code: C5520-1004-0020 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service; please contact us. 11KG 70X46X34cm Itedpsyk E Rbjfx Adkog

Condition: used, functionality: unexamined, Ferwood Code: RU0002777 - Manufacturer Code: KL4001 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer overhaul service; please contact us. 0.5 kg - 20X20X20 Itedpfeyk Egpox Adksg

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: 40715, total width: 2,000 mm, total length: 2,500 mm, total height: 2,000 mm, grinding length: 160 mm, overall weight: 2,100 kg, grinding spindle motor power: 6,000 W, power: 6 kW (8.16 HP), grinding wheel speed: 175,000 rpm, Used ID/OD grinding machine. Machine is in normal condition. Iodpeww Tv Tjfx Adkstg