Used Beck Schrumpftunnel Hv 601 for sale (1,228)

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 19 kW (25.83 HP), input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), heating capacity: 18 kW (24.47 HP), Beck Packautomaten HV601 HPLS Year of manufacture: 2008 Pass-through width: 600 mm Pass-through height: 420 mm with pressure rollers at the outfeed Transport rods: 15 mm with 19 mm silicone coating Ksdey H Ddaopfx Andjna Rod pitch (center to center): 38 mm Hood length: 1700 mm Overall length: approx. 2100 mm Conveyor speed: infinitely adjustable Connected load: 19 kW As shown in the photos

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 Kjdjy H Dxkepfx Andjna - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Passage width: 400 mm Passage height: 130 mm Hood length: 1,000 mm Conveyor length: 1,860 mm Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Additional equipment: Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, total length: 1,860 mm, total height: 1,400 mm, total width: 950 mm, Thermal Shrink Tunnel HV 401 LD - Used unit, year of manufacture approx. 1998 - Tested and operational The high-performance shrink tunnel is built in an energy-saving design. Thanks to its flexible heating system and adjustable settings, the machine can reliably shrink-wrap products of various contours with film. Knodjy H Dtuopfx Andea Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable top and bottom heat. It is equipped with an electronic temperature control system and is designed for a maximum internal temperature of up to 250°C. The conveyor speed is infinitely adjustable. Technical data Passage width: 400 mm Passage height: 150 mm Hood length: 1,700 mm Conveyor length: 2,100 mm Rod conveyor: covered with Teflon mesh (as shown in the photos) Power supply: 380 V three-phase, 50 Hz Heating capacity: adjustable from 2 – 10 kW Rated connected load: 12 kW Color: light grey hammer finish Additional equipment: Temperature control with electronic controller and contactless relay for precise temperature stability

Condition: new, Year of construction: 2017, Exhibition machine Year of manufacture: 2017 (has not yet been used in production) The Compact Star is a pneumatic gluing press with 5 gluing levels. The rotary motion is provided by a pneumatic drive with safety interlocking. Each level has 4 adjustable vertical clamps with an adjustable counter bearing. Each vertical clamp is equipped with a hold-down rail. Furthermore, each level has 2 adjustable horizontal pressure bars with counter bearings. Maximum clamping dimensions: Vertical: 960 mm Horizontal: 1335 mm Material thickness: 50 mm Dimensions: Knedpfx Anekwg Szsdja Length: 2700 mm Width: 3117 mm Height: 3096 mm Availability: short notice Location: Röllbach

Condition: ready for operation (used), We have a BECK HV600 shrinktunnel available. This machine is ready and is working like new! Knjdpfshcdhljx Andja The measurements are in the pictures.

Condition: good (used), functionality: fully functional, price starts from 2.800 EUR Kodpfx Anog Uk Eiodjna gluing press 42000 x 450 x 60 mm press 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Condition: used, 4000 + 5000 mm Working width 250 mm Wheel width 250 mm roll diameter 60 mm work height max. 880 ± 60 mm Feed and Discharge Roller Conveyor Feed Roller Conveyor, Length 4000 mm: * Roller conveyor without scale or stop, with side guides * Conveyor width 300 mm, usable roller width 250 mm Outfeed roller conveyor, length 5000 mm: * Length measuring device with mm scale and reading magnifier on the stop carriage * Measuring track with manual measuring system and a sturdy precision flat steel guide * Conveyor width 300 mm, usable roller width 250 mm Knjdpjzughhjfx Andja

Condition: used, total length: 5,200 mm, total width: 2,700 mm, total height: 6,800 mm, overall weight: 110,000 kg, Renovated by Beck & Röhm in 1992, pressing force: 630 t, bolster area: 1730 × 2500 mm, number of T-slots: 8, ram stroke: 900 mm, Knodpfozdfztox Andoa installation height: 1550 mm, power requirement: 2 × 7.5 kW. Dismantling and loading costs are optional. If dismantling is carried out by the buyer, the corresponding costs will of course be reimbursed. Weight approx.: 110,000 kg Dimensions (LxWxH) approx.: 5200 x 2700 x 6800 mm Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: ready for operation (used), Year of construction: 2007, A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Knjdpfxezc Rfbe Andja

Condition: ready for operation (used), Year of construction: 2019, Product length: 100-600mm, product width: 100-400mm, max. product height: 220mm, max. output: 30 cycles/min. With documentation, 22m long conveyor belt, e-commerce applications and many spare parts. Several pallets with roll film are available. On-site inspection is possible. Knsdpfewal Iasx Andoa

Condition: ready for operation (used), Year of construction: 2005, Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible. Knsdpfowal Igjx Andoa

Condition: ready for operation (used), Year of construction: 2005, Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible. Knjdpswal Imofx Andja

Year of construction: 2007, condition: ready for operation (used), Offered is a Kocher + Beck rotary die cutter/rotary die cutting system, sheet die cutting machine approx. year 2007. Sheet format X/Y approx. 500mm/720mm, material thickness up to max. 0.5mm, die cutting width max. 540mm, unwind max. 732mm, axial adjustment of the magnetic cylinder: +/-7.5mm, machine dimensions X/Y/Z: approx. 2100mm/1150mm/1500mm, weight: approx. 450kg. Inspection possible by arrangement. Ksdpfx Anjxy R E Usdsna

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Ksdoxn Aamspfx Andena

Condition: ready for operation (used), HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment. Kedext Rk Rspfx Andona

Year of construction: 2004, condition: ready for operation (used), Operational hours counter: ca. 14,000h. Kedeh Dw Tvjpfx Andena

Year of construction: 2006, condition: ready for operation (used), Controls: SIEMENS SIMATIC OP7, operational hours counter: ca. 1700h. Kedpfsin E Tasx Andena

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 2004 € 3000 mm 820 - 940 mm Kodswiq Spopfx Andena 300 kg/m 350 mm 63 x 3 mm 15 mm 250 mm supply- and removal roller table with lateral guidance FURTHER LENGTHS: 1meter € 1.149,- 2 meter € 1.418,- 4 meter € 2.405,- 5meter € 3.001,- 6 meter € 3.668,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. (sample photo)

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Storage location: Supplier Kjdpfevvi Nnsx Andsna

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Knsdpfx Anszpgh Dodoa Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: good (used), Year of construction: 2009, Main feeder HB 350 Cover sheet opener DB 150 Plug opener PFG 15 3x rotary suction feeders TA4415 1x functional feeder RA370 Ksdpfx Anozn Hzbedsna Corner turner Addressing head Reading head Cross feeder XRS 130

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, For sale is an R. Beck multi-level gluing press in a robust industrial design. This machine is ideally suited for efficient carcass, frame, and panel construction, as well as for a wide range of gluing applications in carpentry and furniture making. The 5 independently operated press levels allow for the simultaneous processing of multiple workpieces, resulting in high productivity. Technical data: Manufacturer: R. Beck Maschinenbau Year of manufacture: 1997 Usable length: 2,000 mm 5 press levels Operating pressure: 6 bar CE version Machine no.: 270 Equipment: Pneumatic multi-level gluing press 5 press levels, individually selectable Pneumatic pressing Multiple clamping cylinders per level Even pressure distribution Control panel with individual control of the press levels Mobile base frame Robust industrial design Ideal for carcass, frame, and panel gluing Application areas: Furniture manufacturing Carpentry Joinery Carcass gluing Frame gluing Panel gluing Series production Condition: The machine is in used, well-maintained condition with the usual signs of wear and tear consistent with its age. Thanks to its robust construction, it is ideally suited for professional use in crafts and industry. Kedpfxszm Slvs Andena Inspection and test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: new, Year of construction: 2026, NIVEAU - Lift table HS 300 midi incl. swivelmax Description: ᐳ Mobile scissor lift table with platform base frame and 4 holes for holding pins; 4 swivel castors, 2 of which have brakes; wheel Ø 125 mm; operated via foot pump Load capacity in kg: 300 Weight in kg: 85 Effective stroke in mm: 610 Overall height in mm: 400 Overall height in mm: 1010 Platform size in mm: 1200 x 740 Inclusive ! Swivelmax - platform swivel frame with 2-position locking (vertical/horizontal) for panel weights up to approx. 120 kg. The swivel frame can be mounted on the platform base frame of the HS 300 midi in just a few simple steps. Even large-format panels can be swiveled from the vertical to the horizontal position by one person without any effort using this accessory. Size of the panel pivoting frame 1800 x 1480 mm Location: ex stock 54634 Bitburg Knedpfxstgychs Andoa - available immediately -

Condition: excellent (used), Year of construction: 2008, Description to follow! Ksdpfx Aeyrhmbjndena

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set Kjdpecbyzuofx Andsna -Quantity: 10x reamers -Diameter: 5x Ø 35.5 mm H7 -Diameter: 5x Ø 45 mm H7 -Recording: MK -Price/Sale: only complete set -Weight: 24 kg