Used Beckmann 50.40 Ti for sale (7,865)

Condition: excellent (used), Platform Floor Prep Rotor Type Fixed-Angle (Ultracentrifugation) Angle 20 Maximum RPM 50,000 rpm Max g-Force 312,000 xg k-Factor 33 (outer row), 39 (inner row) Number of Tubes13 x 64 mm, 44 x 6.5 mL Caps and Spacers 344389 │ 345827 │ 361676 Nominal Capacity286mL Djdpfexqq I Dsx Adrsku rMAXOuter row: 111.5 mm │ Inner row: 96.2 mm rMINOuter row: 80.8 mm │ Inner row: 65.7 mm BioSafeBio-Enhanced Materials Titanium In picture condition. Please check out our other listings as well.

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 4 nr Dkjdpsz Nfb Iofx Adreu

Condition: excellent (used), The SW 41 Ti is a swinging bucket rotor designed to centrifuge up to six tubes. Used in Beckman Coulter class H, R, and S preparative ultracentrifuges, the rotor develops centrifugal forces for the separation and purification of small particles. Typical applications include separation Dodpsxqq Ikofx Adreku of RNA, proteins, and subcellular particles in solution using rate zonal centrifugation. Approximate sample volume per tube is 0.5 mL, with a gradient volume of about 12.5 mL. Condition and belongings are on the picture. Good working condition. Please check out our other listings as well.

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Djdpez Nggrefx Adroku

Condition: used, Year of construction: 2005, total length: 3,600 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti Year of manufacture: 2005 FORKARDT F+315 Djdszwbxyepfx Adrjku Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this lathe from 2005, as well as a DUS 560 ti from 2004 with chip conveyor, and a DUS 400 ti from 2004. All three machines come from the same factory and were in use together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also own several chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, Year of construction: 2004, total length: 4,200 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti With chip conveyor Year of manufacture: 2004 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this 2004 lathe with chip conveyor, as well as a DUS 560 ti from 2005 and a DUS 400 ti from 2004. All three machines originate from the same factory and were used together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have some collet chucks for the FORKARDT centering chucks. Dedpfx Adjzwbx Tsroku Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: ready for operation (used), Year of construction: 2005, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, total length: 4,066 mm, total width: 2,583 mm, total height: 1,829 mm, workpiece weight (max.): 1,300 kg, type of input current: three-phase, overall weight: 4,300 kg, travel distance X-axis: 345 mm, travel distance Z-axis: 125 mm, workpiece weight between centers: 1,000 g, workpiece diameter between centers: 365 mm, distance between centers: 2,000 mm, workpiece length between centers: 2,000 mm, The VDF 560 DUS is one of VDF Boehringer's most popular teach-in turning machines, known for its turning diameter. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency in the production of single items and small series. This machine is currently located in our showroom, and on-site viewing is possible! Additional options & accessories: - Tool cabinet - Various tool holders - Various cutting tools - Double Multifix holder including Capto connection. - Original fixed guard. - Original documentation. Dsdszwnl Hjpfx Adreku Weight & dimensions: 4,300 kg 4066x2583x1829 mm

Condition: used, Year of construction: 2004, total length: 3,400 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 3,000 kg, VDF DUS 400 ti Dsdpfxezwbyqj Adreku Year of manufacture: 2004 FORKARDT F+250 Previously used in the training department of a gear factory. Was in production until approximately 3 months ago. I own this lathe from 2004, as well as a DUS 560 ti from 2004 with a chip conveyor, and a DUS 560 ti from 2005. All three machines come from the same factory and were used together until they were dismantled in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have several chucks for the FORKARDT centering chuck. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Dkedpsx A E Tfjfx Adrju Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Concrete mixer with tilting drum. Dksdpfx Aez Evf Uedreu

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, König Combiline KCL 6 / 800 mm with WK-RR and Donut station – 2022 Automatic König Combiline line for the production of small breads and shaped products, equipped with a Classic Rex Futura, a WK-RR shaping station, and an original König Donut station. Features: – Manufacturer: König – Model: Combiline KCL 6 – Year: 2022 – Working width: 800 mm – Dividing and rounding head: Classic Rex Futura – Type: Futura T5/4/3S – Drums: SK51 + SK65 – Weight range: 22 to 115 g – Operation in 3 / 4 / 5 rows Dodpfx Adez I U Tcsroku – Maximum capacity: up to 7,500 pieces/hour – Control via touchscreen with programmable settings Line composition: – König Classic Rex Futura, divider-rounder – Pre-elongator – Proving chamber / pre-fermentation – Shaping station with WK-RR coiler – Moistening and seeding system – Automatic depositing system – Donut cutting / stamping station The WK-RR station allows, in particular, the processing of elongated and coiled products and significantly increases the versatility of the line. The Combiline enables the production of a wide range of products: – Round small breads – Hamburger buns – Hot dog buns – Elongated small breads – Flattened products – Coiled products – Various shaped products – Donuts König Donut station: – Width: 800 mm – Bottom-side center cutting – Centering device for precise cutting – Automatic removal of cut dough – Stainless steel construction Condition: Line in very good condition and always well-maintained. It is currently still installed in a bakery in the UK and can be viewed before dismantling. Dismantling is scheduled soon, and the line will then be available in our warehouse in Belgium. Video available upon request.

Condition: used, The centrifuge comes with a Beckmann Coulter SX4750 Rotor! Speed: - 200–10,200 RPM (10-RPM increments) - Display in RPM or RCF Time: - Up to 99 h 59 min or continuous - Displays remaining or elapsed time Temperature: - Set range: −10 to +40 °C (1° increments) - Control accuracy: ±2 °C - Ambient range: 10–35 °C Humidity: - < 75% (non-condensing) Acceleration - 10 rates Deceleration - 11 rates Dkodpfxsyfnxds Adrou Dimensions (W × D × H): - 76.2 × 62.2 × 34.3 cm - 30.0 × 24.5 × 13.5 in. Weight: - 128 kg (283 lb) Ventilation Clearance: - 7.6 cm (3.0 in.) Finishes: - Coated control panel - Acrylic enamel housing Good working condition. Please check out our other listings as well.

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Dkodpsum H Ekofx Adrju Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: excellent (used), Year of construction: 2022, Tilting Spindle Moulder Manufacturer: SCM Model: NOVA TI 105 Year of manufacture: 2022 Table size: 254 x 85 cm Power: 7 kW Tilting: Single-sided 45° Height adjustment: 120 mm Spindle diameter: 30 mm Height and angle adjustment: Electric Dksdpfx Adoy Sg Ncerou Left/right rotation: Yes Speeds: 3500/6000/8000/10000 rpm Motor brake: Yes Including feeder

Condition: ready for operation (used), The Optima XL ultracentrifuge is used to generate centrifugal forces for the separation of particles. It is available in three models: the XL-100K, with maximum speed of 100 000 respectively. Classified “S,” it can be used with all currently manufactured Beckman Coulter preparative rotors; it is also designed for zonal and continuous flow operation. Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465 kg (1025 lb) Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (overall) 120.7 cm (47.5 in.) Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.0 cm (37 in.) Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67.3 cm (26.5 in.) Clearances . . . . . . . . . . . . . . . . . . . . . . . 5.1 cm (2 in.) sides; 15.2 cm (6 in.) rear Dkedpextadtjfx Adrju Finish .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . urethane paint on top surface; general-purpose paint on other surfaces; coated polycarbonate finish on control panel Maximum heat dissipation into the room . . . . . . . . . . . . . 1.0 kW (3400 Btu/hr) Humidity restrictions . . . . . . . . . . . . . . . . . . . . . . . . . .

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Dsdpfx Adjz Izu Tereku Laser on time: 42,100 h EQUIPMENT SheetMaster ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Dsdpfxowuz S Ds Adroku Lateral horizontal groups: yes

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Dkedpfjz Iwvgsx Adreu

Condition: used, Year of construction: 2015, Doses product into trays under a weigher The JASA filling station from 2015 sits under a weigher and catches the weighed portions in a hopper. Two flaps drop the product into the tray below, so you can fill trays of vegetables, fruit or salads neatly and without spillage. The station stands on a mobile stainless frame and has its own control box with on/off and two adjustable fill times. It runs on 230 V. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Dkodpfez Ndahjx Adrou Type: Tray filling station Filling: Hopper with two flaps Controls: On/off and two adjustable fill times Electrical: 230 V Construction: Stainless frame on castors

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller model: SIEMENS 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 640 mm Number of pallets: 2 Table size: 2 × 1,000 × 450 mm Table load capacity: 600 kg Spindle speed range: 50–10,000 rpm Drive power: 18.5 kW Tool interface: DIN 69871 / ISO 40 Feed rate range X/Y/Z: up to 10,000 mm/min Rapid traverse rate in all axes: 30 m/min MACHINE DETAILS CNC path control: SIEMENS 840 D Djdpoz Ibb Tofx Adreku Number of tool positions: 30 Machine dimensions & weight Machine dimensions L × W × H: approx. 3,605 × 3,041 × 3,220 mm Machine weight: approx. 6,700 kg EQUIPMENT 2-position pallet changer 30-position tool changer Internal coolant supply (ICS) Full enclosure with electrically interlocked safety doors Linear guides with double roller recirculating bearing for even absorption of high torques in all directions Ball screws in all 3 axes Machine bed made of Meehanite cast iron for high precision, rigidity, and vibration damping Swivel chip conveyor with integrated coolant system Preparation for 4th axis CE compliant

Condition: used, Year of construction: 2008, This HOMAG single-sided edge banding machine, type: Optimat KAL210/6/A20/S2, is being auctioned online as part of our industrial auction / machinery auction for woodworking machines - edge banding machine - destacking system - vacuum press - veneer shear - membrane press. You can find this and many other items on our platform. Dsdpfx Aoz Ndxyjdreku

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, sheet thickness (max.): 32 mm, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,500 mm Max. material thickness: 32 mm MACHINE DETAILS Drive system: CNC Control system: Beckhoff Resonator manufacturer: Hypertherm Resonator type: Powermax 105 Connected power: 16.8 kW Dimensions & Weight Dkedez Ebclspfx Adreu Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Shipping weight: 3,000 kg Shipping packages: 1 unit EQUIPMENT Various accessories Spare parts Note: The machine is sold without a dust extraction system.

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t Dedpfx Ajztrvnedrjku dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. Dkodpfoz Iww Rex Adrsu The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: ready for operation (used), Year of construction: 2003, 4 cassettes 1 knive Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – Mobile delivery Dkodpfx Aoxnb N Hjdrou Inverter-based, smooth folding adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts and tools