Used Beha Unitest Power Analyzer 93555 for sale (39,651)

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Ledex A Imzspfx Agtohk Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: excellent (used), Year of construction: 2024, Yokogawa WT5000-HG-F Precision Power Analyzer Manufacturer: Yokogawa Test & Measurement Corporation Type: WT5000-HG-F Model: WT5000 Machine Type: Precision Power Analyzer Date of Manufacture: 11/14/2024 For sale is a used Yokogawa WT5000-HG-F Precision Power Analyzer. This high-precision measuring system is suitable for demanding power, voltage, current, and energy analysis in research, development, test laboratories, power electronics, drive technology, and quality assurance. The modular design allows for the flexible use of various measuring elements and offers the highest measurement accuracy for modern testing tasks. Technical Data Model: WT5000 Version: HG-F Date of Manufacture: 11/14/2024 Measuring Modules: 7 slots Configuration: 760903 Current Sensor Elements (as shown in the pictures) Max. Voltage: 1000 V AC Sensor Power Supply: ±15 V DC Mains Connection: 100–120 V / 200–240 V AC Lsdpfx Aozhl D Iegtjhk Mains Frequency: 50 / 60 Hz Power Consumption: max. 650 VA Interfaces Ethernet (LAN) USB 3.0 USB Front Port GP-IB / IEEE-488 Video Out (XVGA) External Clock BNC Connectors Analog Pulse Inputs Features Large Color Touch Display Front-Side Control Panel Modular Design with Pluggable Measuring Elements 760903 Current Sensor Elements Multi-Channel Power Measurement Data Storage Function USB and Network Communication Rack Mounting Possible Power Cable Accessories as Shown in the Pictures Application Areas Precision Power Measurement Energy Analysis Active, Reactive, and Apparent Power Measurement Power Electronics Electric Motor and Inverter Testing Inverter Testing Battery and Accumulator Tests Automotive Test Laboratory Research and Development Quality Assurance Condition Used Optical condition as shown in the pictures. Scope of Delivery Yokogawa WT5000-HG-F Precision Power Analyzer 760903 Current Sensor Elements (as shown in the pictures) Power Cable Mounting Material / Accessories as Shown in the Pictures Scope of delivery includes only the items shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), I am offering for sale a professional laboratory power supply, the BEHA NG 310 P10 (UNIWATT), designed for service, laboratory, educational applications, and testing electronic devices. The device has been inspected and is in perfect working order. It features two independently adjustable 0–30 V / 3 A outputs and an additional stabilized 5 V / 3 A DC output. The power supply has digital displays and the ability to measure voltage and current. The housing shows normal signs of use, as seen in the pictures. It is sold in the exact condition as shown in the photographs. Technical data: • Manufacturer: CH. BEHA GmbH • Model: NG 310 P10 • Supply voltage: 230 V AC, 50/60 Hz • Current consumption: 2.2 A • Outputs: 2 × 0–30 V DC / 3 A Lhjdezrttfjpfx Agtek 5 V DC / 3 A • Measurement input: 0–100 V DC • Digital voltage and current indicators • Catalog number: FW031003300D • Country of origin: Germany Condition: • Used • Inspected – fully functional • Normal signs of use • Sold as shown in the pictures A robust, high-quality laboratory power supply from the renowned German company BEHA, ideal for electronic service centers, workshops, laboratories, schools, and research and development work. Thanks to its two independent adjustable channels and an additional 5 V output, it is perfect for testing, powering, and starting electronic circuits.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: F 3790, pressure: 23 bar, temperature: 221 °C, operating temperature: 221 °C, total height: 3,350 mm, total length: 7,512 mm, total width: 2,975 mm, tank capacity: 33,260 l, empty load weight: 35,100 kg, SUMMARY OF TECHNICAL SPECIFICATIONS General Data Equipment: Steam boiler (monoblock, 1-pass) Type: CR1 24000 X 23 Bars Ledpfxezmfnds Agtohk Manufacturer: ABB ALSTON POWER (Year 2000, CERNAY/France) Location: ETEX (Ottmarsheim) Application: Saturated steam generation for production Pressure & Temperature Design / Operating pressure: 23.0 bar Test pressure: 34.5 bar Max. operating temperature: 221.8 °C Design temperature: up to 273.8 °C (depending on component) Dimensions & Volume Length × Width × Height: 7,512 × 2,975 × 3,350 mm Internal volume: 33,260 litres Heating surface: 700.9 m² Steam output: 24,000 kg/h Construction Horizontal cylindrical welded boiler Internal combustion chamber (smooth/corrugated) + tube bundle Weld joint coefficient: 0.85 (steel) Materials (excerpt) Shell & tube sheets: A48CP (comparable to P265GH) Smoke tubes: ST35.8 (comparable to P235GH) Flanges: BF 42 (comparable to P250GH) Welding & Inspection Welding processes: MAG, ASX, TIG (depending on component) NDT methods: visual inspection, radiography, ultrasonic testing (100 % of tube sheet connections) Qualification according to French regulation (Arrêté du 24/03/1978) Safety Valves 2 units, DN65, set pressure: 23 bar Certified flow rate: 27,845 kg/h each at 23 bar Special Features No post-weld heat treatment No expansion bellows or linings

Condition: excellent (used), Year of construction: 2018, 2018 Prima Power Platino Fiber PLTF 1530 CNC Laser Cutting Machine With O.M.S Sordella Pallet Loading System with Siemens Touch Simatic HMI Lhedpozvc I Hefx Agtjk With IPG Laser YLS-4000 4,000 Watt high Power Laser. Working Area 'X'=3,048mm, 'Y'=1,524mm. Maximum Table Load 1,050kg. Axis Travel 'X'=3,065mm, 'Y'=1,565mm, 'Z'=150mm. Maximum Feed 'X,Y'=100m/min, Trajectory 'X, Y'=140m/min. Trajectory Acceleration 17m/s2. Positioning Accuracy (Pa) & Repeatability (Ps) According To VDI/DGQ 3441 Standards* 'X, Y'=0.03mm. Working Hours 57,510. S/No. P5.03.00.01 (2018). Pallet Loading Capacity 10 Pallets, Maximum Weight On Loading System 3,300kg. With Sick M4000 Safety Light Curtain, Cosmotec Chiller Unit, Chiller Unit, Internal Camera & Manual. Overall Dimensions L10,600 x W3,450 x H2,185mm. Weight 10,000kg. Note: Machine Has Full Service History Records Since Purchase 2018.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 32,225 h, machine/vehicle number: 756 71 004, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Prima power, controller model: Nc Express / Tebis, laser type: CO₂ laser, laser source model: Prima power, laser hours: 9,996 h, laser power: 4,000 W, laser wavelength: 600 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, input voltage: 400 V, input current: 62 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 10,000 mm, total width: 4,000 mm, total height: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, Prima Power Domino LSR 2-3, a highly flexible and precise 5-axis 3D laser cutting machine, ideal for complex trimming and cutting of formed sheet metal components.Machine in good working condition, the machine is production today and will be available from 25/10 -2026 Lodpfxjzg Hivj Agtshk

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Lhjdoy Efbkepfx Agtsk

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, fuel: diesel, continuous power (apparent): 140 kVA, input frequency: 50 Hz, Emergency generator set Lsdeznh Rkepfx Agtohk Year of manufacture: 2024 – fully functional.

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Autofocus height control system Hörbiger laser gas system 2 CCD cameras Lodpfey Ed S Isx Agtohk Teka extraction unit ECO-Cube

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Lhodpfx Agjw Nbh Hetsk Contact to set up in person inspection.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Lhjdpfx Aeyxy D Togtsk Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Lhsdpfjwv U N Sox Agtok Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressing force: 135 t, stroke length: 400 mm, operating speed: 200 mm/s, oil tank capacity: 150 l, overall weight: 9,500 kg, travel distance X-axis: 625 mm, controller manufacturer: ESA, controller model: ESA S550N, working width: 3,050 mm, bending force (max.): 135 t, back gauge speed R-axis: 50 mm/s, back gauge travel distance R-axis: 180 mm, back gauge travel distance Z-axis: 2,100 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, A very well-equipped machine with Y1 / Y2 / X / X1 / R / Z1 / Z2 axes and hydraulic upper and lower tool clamping. The control unit has just been overhauled by the manufacturer, and the machine works flawlessly. Lhodpfxowqhw Ej Agtjk

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), As-new Combined Heat and Power Plants – 2× WOLF Power Systems – 140 kW electric each – unused For sale are two as-new combined heat and power (CHP) plants from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or commissioned and are therefore in technically unused condition. Since delivery approximately five years ago, they have been stored dry and protected. Lhsdpfx Agsyt Emnjtsk Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / as new Storage: dry, professionally stored Availability: immediate The current purchase price is approximately €220,000 net per unit. This is a rare opportunity to acquire high-quality CHP technology well below new price – ideal for commercial, district heating projects, agriculture, or energy contracting. Inspection possible by appointment. Asking price is half of new price, please submit your offer!

Condition: good (used), functionality: fully functional, Year of construction: 2018, Travel ranges: X/Y/Z: 3,048 x 1,524 x 150 mm Laser: CV-5000 (CO²) Operating hours: approx. 9,000 h Cutting head with lens: 5´ / 7.5´ / 9´ Control system: Prima Power NC Expressw e³ Laser Classic Pallet changer: Prima Power/OMS Sordella, max. 3,300 kg Extraction system: Donaldson 2DFP4-SPRK, 2,400 m³/h Cooling system: Hyfra Sigma 67-S Equipment: Sheet metal recognition, oil mist lubrication system, plasma monitoring, laser piercing monitor (LPM), pallet changer with light barriers, machine enclosure. Lsdpfozbxn Ujx Agtohk

Year of construction: 2010, condition: repair required (used), Mastersizer hydro 2000s. Requires laser replacement, which we can perform. Price including replacement: €7,500. Technical specifications: Malvern Mastersizer 2000 particle analyzer for liquids with a Hydro 2000S module. The Hydro 2000S module can circulate from 50 ml to 150 ml of liquid. Variable pump/mixer speeds allow for the suspension and circulation of particles of different sizes and densities, while a variable power ultrasonic system enables the dispersion of particle agglomerates. The Mastersizer 2000 measures the particle sizes in the sample and displays their proportions on a computer in a graph. The measurement takes place as the particles pass between the detector array and the laser. Technical specifications for Hydro 2000S: Voltage: 220-240 V, 50-60 Hz Power: 240VA Maximum particle size: 600 µm Lsdpsx Niiyofx Agtshk Technical specifications for Mastersizer 2000: Voltage: 240 V, 50-60 Hz Power: 60VA Particle size: 0.02 µm to 2000 µm Lasers: Bxzqjbv8Dy Red: gas laser, wavelength 633 nm Blue: LED, wavelength: 466 nm This product consists of two separate units: Mastersizer 2000, Hydro 2000S, software included. Mastersizer External dimensions (W) x (D) x (H): 133 x 30 x 40 cm Hydro 2000S External dimensions (W) x (D) x (H): 34 x 35 x 34 cm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 26,437 h, laser power: 3,000 W, travel distance X-axis: 3,065 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 150 mm, overall weight: 10,000 kg, total height: 2,200 mm, This Prima Power Platino Fiber laser cutting machine was manufactured in the year 2014 in Italy and has 26437 production hours, of which 11414 are laser hours. The machine has a laser power of 3 kW. Machine Benefits Qualitative Machine Benefits • Low hours Technical Machine Benefits • Fiber laser 3000w • 2 tables Ljdpszvu Nvjfx Agtohk • Work feed x/y 100 m/min02/2026- Laser power supply failed. Repair cost estimated at 5k €. Dimensions Machine Depth 3757 mm

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 47,813 h, machine/vehicle number: 302C104, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Prima Power, laser source model: CP 4000, laser hours: 42,420 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, type of cooling: water, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, fume extraction, We are offering this used Prima Power Zaphiro 1530 laser cutting machine, manufactured in 2010. The machine was last operated as a standalone unit and is still functional. The PC and software are already running under VM Ware. Lhodjy Umv Uspfx Agtjk If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2025, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 01/2025, Large-format laminator for laminating materials from roll. The machine is adapted for coating PVC tarpaulins. New machine from 2025, used 3 times for testing purposes only. Machine dimensions: 4200x1200x1400 (LxWxH). Weight: approx. 600 kg. Production capacity: 30 linear meters/hour. Lacquer application: forced via 24V peristaltic pump up to 20L/h. Capable of coating products up to 3.2 m wide. Machine equipped with a strip of IR emitters (12 pcs) for lacquer drying, a blower strip for product cooling, and thermocouples for temperature measurement. Tension regulation of the material is managed by pneumatic reducers. Media: power supply 3-phase/64A/5-pin plug, installed power up to 10kW, compressed air up to 4 bar. Machine under warranty, CE Machinery Directive compliant. User manual available. Lsdpfx Aoyxfqljgtohk Machine is connected to utilities and can be tested on-site.

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Ljdpfexv A N Rex Agtjhk Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Lhodpfxjzl D Exe Agtsk Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Ljdpfx Aozlic Nogtshk Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 10,740 h, machine/vehicle number: 1951 F 262, laser power: 4,000 W, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,020 mm, swivel angle B-axis (min.): -135 °, swivel angle B-axis (max.): 135 °, TECHNICAL DETAILS Linear axis travel paths (XYZ): 4,500 x 2,500 x 1,020 mm Rotary axis travel paths: A-axis ± 360º continuous, B-axis ± 135º C-axis: ± 10 mm Max. speed of linear axes (XYZ): 50 m/min Combined speed of linear axes: 85 m/min Lhodpfexd Um Rex Agtok Max. speed of rotary axes A, B: 540 °/s Acceleration of rotary axes A, B: 60 rad/s² Laser type: CV4000 Laser Installed laser source power: 4,000 W MACHINE DETAILS Operating hours: 10,740 h Power supply: 400 V, three-phase, 50 Hz Installed cooling unit power: 53 kW / 58 kVA Extraction and dust collection system power: 15 kW / 18 kVA EQUIPMENT - OPTIMO machine - CNC control panel: P30L S/N 15/40 - 0083-01 - Prima Power remote control, serial number: 14/06 00489 - Hyfra Sigma 52-S cooling system - Donaldson DFPRO12 extraction and dust collection system - Donaldson MD2 micro-dosing system The machine is powered, however, air and gas supply are required. These are not available on site. Dismantling and loading can be arranged by a company for approx. €22,000.

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm Ljdpfx Agey T Szyetshk TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Condition: used, Year of construction: 2016, Lifting capacity: 150 kg Please contact Gebrauchtgeräte Center for more information Lhedpfxszt U Ume Agtsk