Used Behringer Hbp420 for sale (103)

Condition: good (used), functionality: fully functional, cutting height (max.): 420 mm, cutting width (max.): 420 mm, control type: manual, Equipment: documentation/manual, motor brake, Cutting capacity 90° flat: 420 × 420 mm Cutting capacity 90° round: ø 420 mm Nodpoz Tdgdjfx Ab Rjlh Blade speed: Vario 17 – 110 m/min Blade dimensions: 5800 × 38 × 1,3 mm Country of origin: Germany Motor power: 5,5 kW Machine (L×W×H): 300 × 220 × 190 cm Machine weight: 3200 kg

Condition: excellent (used), Year of construction: 1990, cutting diameter 420 mm saw band length 5.800 mm Njdpfx Abszid Afj Relh cutting width 540 x 420 mm height of material-table 830 mm dimensions of saw-band 5800 x 38 x 1,3 mm mitre joint cuts -/+ degrees 90 - 45 cutting speed 17 - 110 m/min power capacity 5,5 kW voltage 400 V weight of the machine ca. 2,4 t dimensions of the machine ca. 3,40 x 1,40 x 2,30 m - .: 590218 - mitre cutting 85°/-15° - material bundle clamping - material feed by motor driven transport roll with hydraulic elevation - chip conveyor - coolant equipment - machine lamp

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), overall weight: 3,000 kg, This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. The saw features a hydraulic clamping device that operates in both the vertical and horizontal directions. The roller conveyor on the feed side is 15 m long and is equipped with a manually controlled feed mechanism. On the discharge side, there is a 12 m long roller conveyor without a drive. • Working area – Ø / flat at 90°: 420 mm / 720 mm x 420 mm • Working area – Ø / flat at 75° left: 420 mm / 710 mm x 420 mm • Working area – Ø / flat at 60° left: 420 mm / 550 mm x 420 mm • Working area – Ø / flat at 45° left: 420 mm / 450 mm x 420 mm • Working area – Ø / flat at 30° left: 420 mm / 250 mm x 420 mm • Working area – Ø / flat at 75° right: 420 mm / 710 mm x 420 mm • Working area – Ø / flat at 60° right: 420 mm / 550 mm x 420 mm • Working area – Ø / flat at 45° right: 420 mm / 450 mm x 420 mm • Working area – Ø / flat at 30° right: 420 mm / 250 mm x 420 mm • Smallest material dimensions – Ø / flat: 10 mm / 10 mm x 10 mm • Smallest cutting length (90°): approx. 90 mm • Remaining cutting length (manual, 90°): approx. 90 mm • Cutting speed: 10–120 m/min • System/belt tensioning pressure: 95 bar • Connected load: approx. 9 kW • Voltage: 400 V, 50 Hz • Control/hydraulic valve voltage: 24 V DC Nledex D N Amepfx Ab Rsh • Current consumption: approx. 18 A • Fuse protection: 35 A • Cable cross-section: min. 4 x 6 mm² • Material support height: 800 mm Additional equipment • Silberland B 660 powered roller conveyor, 15 m (year of manufacture: 2010) • Chip conveyor (0.15 kW motor)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 600 mm, cutting width (max.): 510 mm, control type: CNC control, Equipment: documentation/manual, lighting, BT65 touchscreen control panel Motorized duplex brushing system 5.5 kW drive motor Centralized lubrication system Deviation control Operator platform (work surface height -150 mm) 600 mm 1,270 mm 510 mm 10 to 110 m/min Ball screw CNC measuring device, cutting width 5 to 510 mm Nljdpfx Ao Adufwsb Rsh Linear laser Spraying gun Chip conveyor (scrapers), height 1,200 mm Stainless steel collection tray with grating Electrical cabinet air conditioning Hydraulic oil heater Electrical cabinet pre-heating with thermostat Light column Lubricant flow control

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Nljdpfx Abszytmzs Rsh Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: used, Year of construction: 2007, cutting diameter 260 mm saw band length 4640 mm cutting width 260 mm control Behringer BT41 capacity 90 degrees: flat 300 x 260 mm cutting range min. Ø10 / 10x8 mm min. cut-off length 10 mm cutting speed steppless 20 - 140 m/min sawing motor 4,00 kW Nljdpfxj Ad Rk Ne Ab Reh dimensions of saw-band 4640 x 34 x 1,10 mm total power requirement 8,50 kW weight of the machine ca. 2,20 t dimensions of the machine ca. 2,60 x 2,00 x H2,20 m With BEHRINGER BT41-Terminal and a built-in 60-liter coolant reservoir.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Nedpfx Asw Tulgsb Rjlh Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Bandsaw machine Behringer HBM 430A Year of manufacture: 2000 Includes roller conveyor, 2100mm The bandsaw machine is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range, round: 430mm Cutting range, flat: 430 x 430mm Drive power: 7.5KW Nedpfx Absz E Nnis Rslh Cutting speed: 17 - 120 m/min. Machine dimensions (L x W x H): 460 x 360 x 220cm Weight: approx. 3400kg

Condition: used, Year of construction: 2014, Behringer LPS 40-4 - Vertical metal bandsaw Nlsdpfx Aez H Acpob Roh - Hydraulic band tensioning - Servo-controlled feed - Sturdy C-frame - Year of manufacture: 2014 Technical data - Working area (L x W x H): 4000 x 680 x 400 mm - Smallest cutting height: 10 mm - Minimum cutting width: 15 mm - Inner table support area: approx. 680 x 4000 mm - Inner table maximum load: 7500 kg - Outer table support area: approx. 680 x 4000 mm - Outer table maximum load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tensioning pressure: 85 bar - Coolant capacity: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connection value: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V= (DC) - Current consumption: approx. 25 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 6450 x 2870 x 2350 mm - Weight (net): approx. 10000 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, Bandsaw automat Behringer HBP 303A / PCM Year of manufacture: 1998 Including magazine for up to 9 tons Magazine dimensions: (L x W x H) 480 x 400 cm Capacity for 9 bars. Length approx. 8 m The bandsaw automat is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range: 260 mm Saw motor drive power: 4 kW Total drive power: 15 kW Cutting speed: 10 - 120 m/min. Machine dimensions (L x W x H): 320 x 260 x 220 cm Nljdpfx Abez E Np Ho Roh Weight: approx. 2500 kg

Year of construction: 2019, condition: ready for operation (used), Plate processing center manufactured in 2019. This Behringer MAG EVO 420 is suitable for drilling, tapping, marking, milling, and plasma cutting of flat steel and sheet metal. It features a roller conveyor for sheets up to 4000 x 2000 mm and an automatic turret tool changer with 14 tool positions. If you are looking to get high-quality plate processing capabilities, consider the Behringer MAG EVO 420 machine we have for sale. Contact us for further details. Nodpfxsz H Nwge Ab Rolh - Infeed System: Roller conveyor for flat steel/plates up to 4000 x 2000 mm with zero-position transverse conveyors, NC feed carriage, and retractable clamps- Outfeed System: Outfeed roller conveyor with lowerable discharge table and chute into material collection container for small parts- Drilling Unit Drive Power: 16 kW- Spindle Speed: 160 to 4000 RPM- Tool Changer: Automatic turret tool changer with 14 tool positions- Software Options: Milling, V-scoring marking, and DSTV interface for machining data import- Plasma Cutting Unit: Kjellberg HiFocus 360i (for material thicknesses up to 50 mm)- Exhaust System: Large-dimensioned filter unit of older year of manufacture with available piping- Control & PC: Modern CNC control enabling remote maintenance by Vernet Behringer service department, machine computer including software, and office software license- Sheet Dimensions: Min. 1500 x 300 mm (750 x 400 mm with restriction), Max. 4000 x 2000 mm- Min. Finished Part Dimensions: 80 x 80 mm- Sheet Weight: Max. 2000 kg and 650 kg/m- Drilling Diameter: 5 to 40 mm- V-Scoring Marking Depth/Diameter: 5 to 40 mm- Plasma Cutting Thickness: 5 to 50 mm- Number of Carriages: 2 clamps - feed carriage, laterally placed- Number of Clamps: 4 clamps (2 + 2)- Transverse Conveyors: 3 short-stroke transverse conveyors to align sheets against clamps after loading- Working Height: 1000 mm

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min - 54 mm band - Clamping device for saw sections Nlsdpjzubxhefx Ab Rjh - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Condition: used, Year of construction: 2017, Behringer LPS 60-T – Vertical metal band saw - Servo feed with cutting pressure control - Robust cast iron band guide - Fast band change Njdpfxsz H Ac Ao Ab Rslh - Operating hours of the saw drive: 32441 h - Year of manufacture: 2017 Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (incl. base pan) - Cutting speed: 10 - 110 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tension pressure: 85 bar - Coolant quantity: approx. 100 l - Motor power – Saw drive: 5.5 kW - Motor power – Hydraulic pump: 2.2 kW - Motor power – Coolant pump: 0.15 kW - Motor power – Chip conveyor: approx. 0.26 kW - Connection value: approx. 10.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current consumption: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,000 kg, Equipment: CE marking, Behringer HBP 263 A – Heavy-Duty Automatic Band Saw (Year 2007) For sale: A high-quality, German-engineered Behringer automatic band saw in excellent condition. This machine is well-known for its precision and durability, and this particular unit has been meticulously maintained. The saw is in premium condition and is equipped with top-tier features. Inspection is welcome! Key Features & Options: • Automatic Start with Laser: Significantly reduces setup time (see video at 0:55). • Variable Frequency Drive (VFD): Infinitely adjustable blade speed control (no maintenance-prone variator belts). • Misting/Coolant System: Essential for tube cutting – keeps the environment clean and prolongs blade life. • Automatic Pressure Regulation: Automatically reduces feed pressure for optimal cutting performance. • Chip Conveyor: Automatically keeps the workspace clean. • Blade Cleaning Brush: Extends blade life and enhances cut quality. • Safety Features: Full protection against blade jamming, breakage, etc. Maintenance History: The saw has undergone a comprehensive overhaul, including thorough testing and calibration. Recent service includes: • Control panel and electrical system checks. • Blade guides serviced. • Complete oil change (Gearbox filled with Shell fully synthetic oil = extended service intervals). • All filters replaced. Technical Specifications: • Cutting Capacity at 90° (Round / Square): 260 mm / 260 x 260 mm • Cutting Capacity at 90° (Flat): 300 x 260 mm • Stepless Cutting Speed: 20 – 120 m/min • Saw Band Dimensions: 4,640 x 34 x 1.10 mm • Saw Motor Power: 3.00 kW • Total Power Requirement: 8.00 kW Nodpeyv Arnsfx Ab Rslh • Min. Cutting Length / Diameter: 10 mm / 15 mm • Machine Weight: approx. 2,000 kg • Dimensions (L x W x H): approx. 2.60 x 1.60 x 1.90 m

Condition: ready for operation (used), Year of construction: 2020, total width: 865 mm, total height: 2,175 mm, overall weight: 470 kg, cutting speed: 68,000 mm/min, product length (max.): 1,335 mm, Circular Metal Saw manufactured in 2020. This Behringer VMS 370 PV features a cutting capacity of up to 130 mm for round material and 120 x 120 mm for square material. It includes a saw blade diameter of 370 mm and a hydro-pneumatic saw feed. If you are looking to get high-quality cutting capabilities, consider the Behringer VMS 370 PV machine we have for sale. Contact us for further details. • Cutting capacity at 90°: Nljdpfx Asz Dg Idob Rjh • Round: up to 130 mm diameter • Square: up to 120 × 120 mm • Flat: up to 200 × 100 mm • Cutting capacity at 45°: • Round: up to 130 mm diameter • Square: up to 100 × 100 mm • Flat: up to 140 × 100 mm • Cutting capacity at 30°: • Round: up to 105 mm diameter • Square: up to 90 × 90 mm • Flat: up to 100 × 100 mm • Saw blade diameter: 370 mm • Motor power: 2.0 / 2.6 kW • Saw blade speeds: 17 / 34 / 68 rpm • Optional saw blade speeds: 8 / 16 / 32 / 64 rpm • Saw feed: Hydro-pneumatic • Material clamping: Pneumatic • Mitre cutting range: -45° to +45° • Additional mitre angle: 30° on one side • Coolant system: Integrated • Material support height: 900 mm

Condition: used, Year of construction: 2014, machine/vehicle number: 0102-260015, The Behringer HBE 261 A Dynamic automatic band saw is a fully hydraulic, cost-effective, high-performance band saw designed for automated 90° cuts in industrial manufacturing. This Behringer band saw is ideal for the safe, precise cutting of structural steel sections as well as difficult-to-machine solid metal materials and comparable solid plastics, in both manual and automatic modes. Nlodpfx Abjzfw Dho Rsh The HBE 261 A Dynamic automatic band saw has a cutting range of 10 mm to 260 mm for round material and 10 x 8 mm to 300 x 260 mm for flat material, with a saw blade size of 4.440 x 34 x 1.1 mm. The frequency-controlled band saw drive has a drive power of 2.6 kW and a continuously variable cutting speed of 15–110 m/min. The cutting speed can be set and read on the control panel. The total drive power is approximately 3.7 kW. The machine features optional equipment such as a chip conveyor, central lubrication, a line laser, electronic monitoring of the minimum speed, an LED worklight, a spray gun for chip removal, a cutting display with error diagnosis, and a roller conveyor system on the infeed and outfeed sides.

Condition: used, Year of construction: 2016, Machine type : Horizontal bandsaw, dual-column Manufacturer : Behringer Model : HBP 313 Serial number : 10009454 Year of construction : 2016 Cutting capacity (round) : Ø 310 mm Cutting capacity (rectangular) : 310 × 310 mm Blade dimensions : 4,470 × 34 × 1.1 mm Blade speed : 15 to 110 m/min (adjustable) Control type : Semi-automatic Blade guide : Carbide Feed descent : Hydraulic Clamping system : Hydraulic vice Power supply : 400 V / 50 Hz / 3~ Motor power : 4 kW Nlsdpfxew Dd Rus Ab Rjh Machine Application The Behringer HBP 313 is a horizontal bandsaw designed for precise cutting of profiles, solid bars, tubes, and full-section steel. It is ideal for metal fabrication shops, steel structure production, and sawing centers. Features / Differences – Dual-column frame ensures stability and rigidity during cutting. – Fully hydraulic system for saw frame feed and material clamping. – Carbide blade guides provide straight, vibration-free cuts. – Wide blade speed range (15–110 m/min) adapts to various steel grades and materials.

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 7,765 h, Behringer HBP 263 AG fully automatic metal bandsaw (2008) Nledpszwhdpsfx Ab Reh Manufacturer: Behringer Model: HBP 263 AG fully automatic metal bandsaw Year of manufacture: 2008

Condition: good (used), Year of construction: 2018, Burning and Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Nodovzrczjpfx Ab Relh Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool turret Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transverse conveyor Number of carriages: 2 with clamps NC feed carriage, positioned on the side 4 clamping jaws (2+2) 3 short-stroke transverse conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with a lowerable discharge table with a chute into a material collection container for unloading small parts. Filter unit incl. piping Powerful for the use of carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and V-scoring LANTEK license 191026ä Availability: immediately!

Condition: used, Year of construction: 2019, Saw blade diameter: 350 mm Nledjznxg Nspfx Ab Rsh Cutting area flat 90°: 170 x 100 mm Sawing area flat 45°: 120 x 100 mm Cutting area round: 120 mm Pneumatic Saw Blade Feed Coolant pump / minimum quantity spray device Pneumatic material clamping Presented for sawing of stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units – Behringer HBE 321 A dynamic new machines, available for immediate delivery from stock. Attention: You can receive up to 15% in funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (item no. 33) Active cutting monitoring (item no. 22) BEHRINGER screw-type chip conveyor (item no. 105) Automatic bar-end detection (item no. 535) Nodpfe Adpvqjx Ab Rolh Lighting (item no. 941)

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Nlodpfxjx Ruude Ab Rsh Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 410 mm, BEHRINGER HBE 411 A – Dynamic, NEW MACHINE! – at a top price Manual positioning 18 Cutting monitoring 22 Saw drive 5.2 kW 50-2 Nsdpfxe Adpume Ab Relh Chip conveyor 100 5 Micro 250 Package clamping device 440 Bar end detection 535 Retract cylinder 550 Clamping pressure regulation 832 Line laser 940 Illumination 941 Cutting channel extension Behringer new machines: Come, see, buy Immediately available from stock Warranty from date of purchase Do you have a breakdown? Replacement in the shortest possible time Delivery and installation on request Immediately available from stock

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Nodpfx Abjx Rut Te Rolh Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: used, Year of construction: 1977, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: fully automatic bandsaw machine Machine weight: approx. 1.2 t Cutting Range Cutting diameter: 250 mm Saw blade length: 450 mm Cutting speed: 50 / 70 / 100 / 135 strokes/min Performance Data Total power requirement: 3.8 kW Njdpfx Ao Aaz Nbsb Relh Dimensions Length: 2.6 m Width: 1.8 m Height: 1.1 m EQUIPMENT Fully automatic operation