Used Behringer Hydraulic Hacksaw Machine for sale (73,331)

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering Hfedpfslqadhsx Ac Neh - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg good condition

Condition: good (used), Year of construction: 1989, machine/vehicle number: 0172, Offer 25286 Technical specifications: - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting range - 90° round: approx. 252 mm - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm - 45° round: approx. 160 mm Hfodpfow Ei Tdsx Ac Nsh - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening: 265 mm – miter-adjustable vise - Coolant system - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm - Weight: approx. 600 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow Hjdpfxju H Acyo Ac Nsfh - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg Hfjdewb Hxvopfx Ac Nsh

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Hedpfoy Uiyvsx Ac Nefh Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, mileage: 369,767 km, power: 368 kW (500.34 HP), first registration: 04/2013, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 5,200 mm, loading space width: 2,510 mm, loading space height: 1,100 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, differential lock, trailer coupling, = Additional options and accessories = - Remote central locking - Lift axle - Air suspension - Pintle hook - Sun visor - Spotlights = Notes = Loading space: 520 cm Loading floor height: 110 cm Loading height in wheel well: 90 cm = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 10,300 kg Payload: 17,700 kg GVW: 28,000 kg Identification Model number: FM 500 6x2 / MACHINE TRANSPORT / Hjdpfx Acezc Rhcj Nsfh = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Type Hydromat. Also ideal as a spare parts machine. Hodpozdkbkjfx Ac Nofh

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hfjdpfx Aszcv Uujc Njh Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, cutting force: 12.5 t, sheet thickness steel (max.): 6 mm, overall weight: 2,000 kg, Equipment: CE marking, emergency stop, finger protection, foot remote control, Hydraulic notching machine Manufacturer: Boschert, Type: K30 – 120, Punching press: Trumpf Year of manufacture: 2001 Hsdpfx Ajzcm Ncsc Nefh Technical data Width x Depth x Height: 1.5 x 1.6 x 1.4 m Weight: 2,000 kg Table dimensions: 1600 x 1000 mm Station 1: Notching Angle range: 30 - 120 degrees (infinitely adjustable) Cutting length: 200 mm Cutting capacity: 6 mm in ST 40 steel 4 mm in stainless steel Station 2: Punching (Trumpf tool system) Punching force: 12.5 t Punching diameter: 105 mm max. Overhang: 300 mm All information is subject to change without notice. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Internal article number: 26048 Hfodpfozb I Hgjx Ac Nsh Hydraulic bandsaw Manufacturer: Kasto Type and year of manufacture are unfortunately no longer identifiable. + Coolant pump Saw blade length: 400mm Clamping range: 250mm Max. clamping height: approx. 250mm LxWxH: 170 x 100 x 110cm Weight: approx. 250kg The machine is fully functional and can be inspected by appointment on our heated storage area of over 500m².

Condition: good (used), Year of construction: 2000, Technical specifications: Hfedpszbmw Dsfx Ac Nsh Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Conical bending unit through angled positioning of the two side rollers Mobile control panel Hydraulic folding bearings Motor power: 31 kW Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 Hodpfx Aezbcwmjc Nsfh The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment Hedpjza D Eijfx Ac Nefh - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2002, *📋 MACHINE DESCRIPTION* - *Make / Model*: GEKA PUMA 80/E-500 - *Year*: `To be completed` - CE marking, first-hand machine - *Condition*: Very good working condition. Original paint with normal signs of wear. Stored in a dry place. - *Power*: 80 Tons - *Gooseneck*: 500 mm deep - *Motor*: 7.5 kW - Three-phase 400V - 50 Hz Hjdpfx Acoy U U R Te Njfh *⚙️ TECHNICAL SPECIFICATIONS* 1. *Punching station*: Ø 28 mm in 20 mm thickness / Ø 40 mm in 14 mm 2. *Flat bar shear*: 300 x 20 mm 3. *Angle shear*: 120 x 120 x 12 mm at 90° 4. *Nibbler*: Included and mounted on the machine 5. *Round/square bar cutting*: Ø 45 mm / Square 40 mm *✅ INCLUDED EQUIPMENT* - Foot pedal control + manual levers - Emergency stop + lockable isolator switch - 1 set of punch/die mounted on the machine `Specify Ø` - Electrical cabinet with diagram - CE protective guard

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Hfodpfx Acjza D U De Neh Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, BEYELER HYDRAULIC BENDING MACHINE 3000X100 TON. MOTORIZED REGISTER, 3 AXES. RECESS 250. DIMENSIONS: 350X160X245 cm (H), WEIGHT 6,500 KG (65 QL.) Hodpfx Acsvxif Io Nefh

Year of construction: 2002, condition: excellent (used), Manufacturer: GBS Year of manufacture: 2002 Weight: 350 kg Working length: 3300mm Hsdpemv Hz Iofx Ac Nefh Pipe thickness: 12 and 15 mm 2 heads, force: 2t

Condition: used, functionality: fully functional, Professional pipe bending machine with hydraulic drive. Suitable for steel pipes, stainless steel, and possibly thick-walled copper pipes. INCLUDES a wooden crate with a comprehensive set of bending dies/bending segments (see photo) – this is what gives it its real value, as bending segments are very expensive when purchased new. Ideal for heating engineers, plumbing companies, steel pipe construction, plant engineering, and training workshops. With the included set, various diameters can be bent directly. Technical data: - Type: hydraulic pipe bending machine, stationary unit - Drive: three-phase 400 V / hydraulic unit - Bending dies: comprehensive set available (wooden crate, see photo) - Construction: steel frame, mobile/stationary Hfedpozab Emsfx Ac Njh - Application area: typically pipe OD 20-60 mm (verify on-site) - Year of manufacture: approx. 1980s-1990s Collection/transport: Self-collection with a forklift. Loading on-site is possible. Shipping via freight forwarder on a pallet can be arranged.

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg Hedpfx Ajy Uwpxec Nsfh

Condition: used, Manufacturer: ENDI Engineering Kft Hjdpfxey E Twae Ac Nofh Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: - Pressing force 420 kN / 42 t - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg Hjdpfxoy Uwhbj Ac Nofh

Condition: good (used), Internal article no.: 24080 Hfsdpouxbwgjfx Ac Nsh Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m Hodpfxou Ibuks Ac Nsfh fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Year of manufacture: 1988 Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Hjdpfx Acey T R Sws Nsfh Equipment: • Bending angle adjustment via potentiometer! • Controlled rear stop, 1000 mm • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning • Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2010, Technical data: Working width: 6500 mm Maximum bending capacity: 10.0 mm Maximum bending angle: 7.0 mm CNC control Diameter of upper roller: 420 mm Diameter of side rollers: 315 mm Diameter of central lower roller: 400 mm Conical bending unit by angling the two side rollers Mobile control panel with digital display Hydraulic folding supports CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 39 tons Optional equipment: Side bending aid Swiveling bending aid on top Hodpfx Ajx Iitisc Nsfh Condition: Very good condition, little used Operating hours: 100 hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.