Used Beka Baier + Köppel Mzn 12-75 A Zahnradpumpe for sale (82,747)

Condition: ready for operation (used), BEKA Baier + Köppel MZN 12-75 A gear pump, serial number as shown in the photo, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Fpsdpfx Asi D E H Uefusn

Condition: new, BEKA Baier + Köppel MZN 12-75 A gear pump, serial number as shown in the photo, unused, 100% functional, scope of delivery as per photos. Fpedpfx Afoi D E Iysusn

Condition: good (used), functionality: fully functional, degree of automation: automatic, actuation type: hydraulic, Equipment: emergency stop, foot remote control, We offer this well-maintained (used), fully functional Baier Biegemaster 4.125 swiveling bending machine, press brake. Manufacturer: Baier Model: Biegemaster 4.125 Condition: good (used) Machine type: Swiveling bending machine, press brake The machine was used for bending and forming sheet metal and is in used condition, commensurate with its age. Inspection possible by appointment. Further technical data and images available upon request. Loading and transport will be arranged. Equipment/Features: - Hydraulic swiveling bending machine - Bending angle adjustable via control panel - Manual, foot, and automatic operation - Foot pedal control Fpsdpfx Afsz I Tnrjuen The machine is currently in use in our sheet metal workshop but is available immediately. If you have any questions or require further information, please send us a message or call us.

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Fpedpozpbq Hjfx Afuen Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Condition: good (used), Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, single-line lubrication -Manufacturer: BEKA Baier Köppel, OIL central lubrication pump from milling machine Deckel FP4L -Type: EA 6.3. -Engine: ABM 0.18 kW Fodpfx Asupbcisfuepn -Dimensions: 280/140/H375mm -Weight: 14.1 kg

Condition: used, Year of construction: 2015, A Keller extraction system in need of repair is offered for sale. Extraction capacity: 7500m³/h, negative pressure: 250daPa, extraction ductwork: DN355/DN400, exhaust stack: DN560 including silencer, fan type: MAE , shaft power: 6.89kW, speed: 2915rpm. A service check including inspection of the filter elements and air-flow measurements was carried out in 2024. This revealed increased differential pressure across the filter cartridges, leaks and insufficient air flow. Including wall bracket. Documentation available. An on-site inspection is possible. Fpedpfx Aez Hn Svefuon

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Fpsdpfxsz Dw Emj Afuen Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 22 kW (29.91 HP), Item No. 5.4-783 1 used automatic band saw Kasto KASTO HBA A10x12, year of manufacture 2004 Roller conveyor Chip conveyor Fpsdpsz Ehryjfx Afuon Coolant system Technical data: Cutting range (round) 300-1260 mm Cutting range (square) 1060x1060 mm Cutting speed (variable) 12-90 m/min Saw band dimensions 11430x80x1.6 mm Total drive power 20 kW Machine weight (approx.) 15500 kg Technical data, accessories and machine description are non-binding.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 617 138 66, input voltage: 380 V, type of input current: three-phase, total length: 5,000 mm, total width: 3,100 mm, total height: 2,000 mm, Rotary slitter for converting rolls into sheets Cardboard and corrugated paper Fpsdpfszi S Agjx Afuen Slitting width from 700 to 1500 mm Maximum roll diameter: 1500 mm

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm Fpedpfoy Erxvjx Afuen suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management Fpodewl Rucepfx Afuen The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Year of construction: 2005, condition: ready for operation (used), A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible. Fpjdpfx Afezidi Seusn

Condition: ready for operation (used), Year of construction: 1999, A Söderhamn Eriksson log debarking machine with infeed and outfeed units, but without electrical equipment (control cabinets), is available. Feed speed: 75m/min, Log diameter range: 110mm-750mm, Rotor speed: 222rpm, Rotor motor power: 75kW, Feed motor power: 2.2kW, Hydraulic power unit: 1.5kW. The rotor of this machine was replaced with a factory-overhauled rotor in 2021. Documentation available. An on-site inspection is possible. Fedpfx Afjruq Dfsuopn

Condition: used, Year of construction: 2002, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, fork length: 2,400 mm, General information Year of manufacture: 2002 Weights Empty weight: 16.100 kg Functional Lifting capacity: 12.000 kg Maximum passing height: 395 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Fpodpoz I A T Refx Afujn Other information Mast type: duplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Roof window = More information = Make of engine: Scania Number of valves: 3 Front tyre size: 315 / 80 R22,5 Fork carriage: Positioner and spread Please contact Bas Sindorf , ) for more information

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 1001058, power: 4 kW (5.44 HP), type of input current: three-phase, cutting height (max.): 800 mm, total height: 800 mm, overall weight: 2,960 kg, coolant pump power: 120 W, cutting range round steel at 45°: 440 mm, cutting range round steel at 90°: 800 mm, cutting range square steel at 45°: 440 mm, cutting range square steel at 90°: 800 mm, height adjustment type: hydraulic, roll diameter: 800 mm, saw band length: 820 mm, saw blade length: 8,200 mm, Excellent working condition. Last 2 years doesn’t work Fjdpfxsxwcd Dj Afuopn

Condition: ready for operation (used), Year of construction: 1965, Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible. Fedszukthspfx Afuepn

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Fodpfx Aew Emhfefuspn Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: reconditioned (used), functionality: fully functional, used spiral mixer Kemper ST 75 A extendible, overhauled, for 75 kg flour, 2 timers, with 1 extendible stainless steel bowl, 1 more bowl available for additional €3,500, stainless steel spiral, electrics renewed, newly painted, new bearings, new V-belts, model no. 6722781, 25 A, 380 V Fjdpfxezdaz Ue Afuspn

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2007, total length: 9,580 mm, total width: 2,450 mm, wheelbase: 8,010 mm, color: other, Year of construction: 2007, Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 3.720 kg Carrying capacity: 35.280 kg Fpodpez Iylwjfx Afuen GVW: 39.000 kg APK (MOT): tested until 02/2027 Registration number: OJ-98-VX

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2007, total length: 9,580 mm, total width: 2,450 mm, suspension: air, tire size: 385/65, tire condition: 60 %, wheelbase: 8,010 mm, color: other, Year of construction: 2007, Axle configuration Tyre size: 385/65 Make axles: BPW Tyre profile: 60% Brakes: drum brakes Suspension: air suspension Fpodpfxjz I S Tas Afuon Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.640 kg Carrying capacity: 35.360 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Registration number: OJ-35-VG

Condition: used, axle configuration: 3 axles, color: other, Year of construction: 2002, Empty weight: 3.900 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! Fpodpfx Aou Snbrjfujn

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 re.HJND-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped Fodpfx Aeuxfucofuepn with a high-resolution rotary encoder so th...

Condition: good (used), Year of construction: 2006, material conveyor MOTAN BCB 75 A HBS 7,5 kW, year: 2006, price: 3.100 €, contact: Mr. Rainer Eckerle Fodpfod Ewc Asx Afuepn

Condition: used, Year of construction: 1997, functionality: fully functional, BAIER Geba 46/A embossing and punching machine, year of manufacture 1997 Fpodpfx Aeyt Igwjfuen fully operational - two punching units - Geotin cutter - operating documentation max. material width: 250 mm max. punching width: 240 mm heating power: 2200W embossing force: 100kN

Condition: good (used), machine/vehicle number: 2212 0030, turning height: 1,150 mm, workpiece weight (max.): 4,000 kg, power: 0.037 kW (0.05 HP), TOS Vertical Lathe model SK 12 A, 37Kw Skoda main motor, plate diameter 1250mm, maximum diameter to be turned on the right carriage 1540mm, working height 1100mm, maximum weight of the part to be turned 4000kg, 1 carriage with 3-position turret, 1 vertical carriage with 45º inclination, includes the display of the degree inclination, weight of the lathe 20 tns, Fsdpsqnwqzjfx Afuopn