Used Berg & Schmid X-Rock 1250 for sale (62,569)

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm Dujdpfx Aet Eacgsd Njt band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Dujdpjfg E Hpjfx Ad Njt Guides. Price on request.

Condition: used, 1 used band saw automatic machine Manufacturer: Berg & Schmid Dujdpfxoytvqqj Ad Net Model: X Tech 410 Technical specifications: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Band run monitoring with automatic feed adjustment - Automatic cut-in for the first cut, minimum remnant length 15 mm - Infinitely variable, frequency-controlled saw drive - Clamping pressure regulation for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided saw band lift-off device - Hydraulic saw band tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: platinum grey RAL 7036 and turquoise RAL 5018

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: - Cutting range at 90° round 320 m - flat 320 x 320 mm - Automatic material feeder - saw blade dimension 5095 x 34 x 1,1 mm - cutting speed 10 to 120 m/min - hydr. lifting - lowering of the saw frame - upper stroke limitation of the saw frame - cutting pressure infinitely variable Dedpsim Ildefx Ad Nout - hydr. material vice - chip conveyor screw - coolant device - discharge roller conveyor 2500 mm - drive 400 V / 4,0 kW - space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Condition: new, Year of construction: 2025, cutting diameter 360 mm saw band length 5050 x 41 x 1,3 mm cutting width 1,3 mm cutting speed 15-100 m/min total power requirement 4 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0x 2,6 x 2,2 m The X-SMART 4 ??is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm. Duedpowg Sflofx Ad Njt Other features include: 4 kW drive motor with 41 mm saw blade width Modern 7" touchscreen CNC control Inclined saw frame Solid 2-column structure Linearly guided material sensor Hydraulic cutting pressure regulation 500 mm feed unit Double vise 2 vises in front of and 2 vises behind the saw blade Electrically driven chip conveyor Cleaning gun Full enclosure LED work light Minimum remnant length 100 mm Optionally available: Bundle clamping device; MMS and roller conveyors

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device Dujdod Iinzopfx Ad Nst · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,27 t dimensions 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° Djdpod Iin Asfx Ad Neut - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,22 t dimensions 0,7 x 0,9 x 1,9 m ATTENTION: SPECIAL PRICE!!! Dsdpfx Asd Iin Ded Njut - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanship

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device Dodpfx Adsyrhu Ss Njut • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: used, saw blade diameter 350 mm Duedpfx Adod Iinye Net capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom!! Roller conveyors optional!! Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular sawing machine VELOX 350 VA-MPS fully automatic hydropneumatic machine For saw blades up to 350 mm Ø, miter left + right 45° and bevel cuts up to 45° left + right. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45°L 65mm round, 60mm square, 180x50mm flat - 45°R115mm round, 100mm square, 150x80mm flat Standard equipment: - State-of-the-art micro-processor control with multifunctional display - Safety package with the following functions: 1. minimum input pressure monitoring 2. vice monitoring/material clamping - Hydro-pneumatic control of the saw head Dusdpfx Adsrpiu Ds Nst - Pneumatic double clamping device - Pneumatic vertical clamping device - Electro-pneumatic material feed unit - Nonius for fine length adjustment - Integrated coolant spraying device - Connecting piece for chip extraction system Speed 3600 min-1

Condition: good (used), Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW Dsdpfx Aor A H R Ted Nout -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Bandsaw mitre saw Berg & Schmid GBS 242 DG AutoCut, year of manufacture 2020, 400 V, speeds 37 + 74 m/min, saw blade length 2965 x 27 mm, coolant system, serial no. 13346033, with 2 roller conveyors Bernado RB 10-3000. Dedpfey I Nz Tex Ad Neut

Condition: used, Format: 0x0 Duedpfx Adox Rh D Se Not Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: excellent (used), Year of construction: 2011, input voltage: 400 V, Equipment: CE marking, Mitre Band Saw - For left mitre cuts up to 60° and right up to 45° - Cutting speed: 37 and 74 m/min. - Automatic saw frame lowering with rapid approach to the workpiece and shut-off at end of cut - Quick-release vise in T-slot, sliding for quick position change - Chip removal brush - Automatic cooling system - Machine base - Incl. 1 HSS-Biflex saw band 2765 x 27 x 0.90 mm Cutting capacity: 90° Round Ø 255 mm Square 240 mm Rectangle 300 x 180 mm Dujdpoy Id Dcefx Ad Njt 45° Round Ø 210 mm Square 190 mm Rectangle 210 x 100 mm 60° Round Ø 135 mm Square 115 mm Rectangle 140 x 90 mm

Condition: excellent (used), Year of construction: 2006, input voltage: 400 V, Mitre Band Saw - Supply voltage 400 V - For mitre cuts to the left up to 60° - Cutting speed 30+60 m/min - Carbide saw band guides - Automatic cooling system Djdpoy H D Ifjfx Ad Nout - Machine base with tool compartment - Includes 1 HSS-Biflex saw band 2140 x 20 x 0.90 mm Cutting range: 90° Round Ø 175 mm Square 170 mm Rectangular 190 x 130 mm 45° Round Ø 110 mm Square 110 mm Rectangular 150 x 110 mm 60° Round Ø 75 mm Square 75 mm Rectangular 100 x 75 mm

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 25 - 80 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system Dsdpfx Ajd Iip Tod Njut -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm capacity 90 degrees: square 90 mm capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm total power requirement 1,5/2,0 kW Dodpfxofg Rlaj Ad Njut weight of the machine ca. 0,135 t dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: used, saw blade diameter 400 mm capacity 90 degrees: round 110 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 200x60 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 140x60 mm total power requirement 1,5 kW weight of the machine ca. 130 t dimensions 0,8 x 0,7 x 1,3 m SPECIAL PRICE!! Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps Dedpfsd Iinxex Ad Neut · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Optional saw blade

Condition: new, pressure 17,0 kN Duodpjfv Avvofx Ad Not stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15+30 oder 30+60 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,44 t dimensions of the machine ca. 0,8 x 1,1 x 2,1 m SPECIAL PRICE!!! Dujdpfx Adjd Iin Is Net High-performance vertical circular saw Hydropneumatic semi-automatic. (20185/ 20188) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal tension wheel for high power transmission c. · Solid, strong cast iron table Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg Dujdpfx Ajfv Av Sod Net dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: used, saw blade diameter 530 mm capacity 90 degrees: round 180 mm capacity 90 degrees: square 170 mm capacity 90 degrees: flat 380x70 mm capacity 45 degrees: round 180 mm Duodpfx Ajd Iinwed Net capacity 45 degrees: square 150 mm capacity 45 degrees: square 290x70 mm total power requirement 2,2 kW weight of the machine ca. 350 t dimensions 1,1 x 0,9 x 1,5 m Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Saw blade optional

Condition: new, saw blade diameter 275 mm capacity 90 degrees: round 90 mm capacity 90 degrees: square 80 mm capacity 90 degrees: flat 100x70 mm Dedpfx Asd Iipajd Nsut capacity 45 degrees: round 75 mm capacity 45 degrees: square 70 mm capacity 60 degrees: flat 80x60 mm total power requirement 1,1/1,3 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 0,5 x0,85 x0,95 m The versatile professional metal circular saw. Convincing in performance and price. • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Cone safety clutch made of hardened steel to protect the saw blades. • 2 speeds 33 + 66 rpm • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Closed cast, massive cast superstructures • Operator side miter adjustment • Machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 70)

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg Djdpfx Adsfv Awas Njut dimensions 160 x 230 mm