Used Bernstein Bench Vice With Ball Joint for sale (9,205)

Condition: good (used), Vise, bench vise, locksmith's vise, clamping vise, workbench vise, clamping vise, table vise -Manufacturer: Bernstein, Spannfix ball joint vise, rotatable 360°, tiltable 45° -Clamping jaws: 45 x 25 mm Njdpfx Aex S Rq Rei Tjwn -Wingspan: 90 mm -Table clamp: up to 82 mm -Transport dimensions: 310/10/110 mm -Weight: 1.4 kg

Condition: excellent (used), Drill machine with vice Nedpfo Adqb Usx Ai Town

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Nedpfxjz Dtcbj Ai Tjwn Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Nsdpfx Aiez N Skco Tjwn Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise, swivel lift for bench vise, vise lift, vise height adjustment device Nodpfx Aisz Rv Ino Tjwn -Manufacturer: Orion, rotary lift for bench vise -Lift height: 225 mm -Column: Ø 65 mm -Dimensions: 280/160/H480 mm -Weight: 9.4 kg

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise Nodsz Rvtdepfx Ai Tewn -Manufacturer: Orion, solid vise type 12S -Clamping jaws: 125 x 25 mm -Wingspan: 210 mm -Dimensions: 435/200/H230 mm -Weight: 29.6 kg

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise -Manufacturer: ZS, solid vise -Clamping jaws: 150 x 25 mm -Wingspan: 215 mm Nwsdpfsycfttex Ai Tsn -Dimensions: 440/170/H245 mm -Weight: 31.8 kg

Condition: good (used), Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise Nwedpfokvrpwex Ai Ten -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise Nwodpfez Hxa Rjx Ai Ten -Parallel vise: height adjustable, jaw width 180 x 30 mm -Wingspan: 235 mm -Dimensions: 540/230/H590 mm -Weight: 38 kg

Condition: new, Year of construction: 2026, operating hours: 40 h, functionality: fully functional, machine/vehicle number: Technofold, infeed width: 1,200 mm, Offer of the Technofold 1200 SL with Gyro Ljbmsw Ec D Ao S Ngtheru Specification: Njdpfx Aij Afbw Ne Town Machine speed: 400 m/min Step speed: 20 m/min Packaging width: 160-1200 mm Machine dimensions: 22x1.88x1.5 m Machine weight: 9.2t Max power consumption: 26 kW Air demand: 6 bar/ max 10m3/h Machine equipment: 4-6 point machine Gyro - rotating packages by 90 Side equation section - left/right Pre-breaking section Automatic bottom section Servomotors, 4/6-point rear bending system Lower circular gluer left/right KQ cold glue system with 4 guns Final crimping and closing section Broadcast section Ironing section with independent drive Pneumatic insertion rollers with SQUARING 2 alignment Tapping block - SPANKER vacuum on the feeder + vibrator Camera with monitor on display

Condition: good (used), Vice, bench vice, metalworker's vice, parallel vice, heavy-duty vice Nwjdpfxevm U Hto Ai Ton -Parallel vice: jaw width 150 x 30 mm -Wingspan: 235 mm -Dimensions: 490/220/H195 mm -Weight: 26 kg

Condition: good (used), bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available -Price: per piece -Dimensions: 440/200/H490 mm Nodpfxevmg Ddj Ai Town -Weight: 26 kg

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table Nwedsrfztdjpfx Ai Tjn -Workbench: solid version, with drawer and vice -Workbench: 2000/720/ H940 mm -Vise: 460/160/H175 mm -Clamping jaws: 150 x 25 mm, clamping width: 195 mm -Total weight: 122 kg

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg Nodpfx Aisddfh Ej Tswn

Condition: good (used), functionality: fully functional, Year of construction: 2007, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Njdoz Dumzepfx Ai Tewn Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Njdpfx Ajh Aw Rnoi Tswn Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: used, Workbench, work table, assembly bench -with: bench vice and 2 side tables -Workbench: 2045/720 mm, total height: 1100 mm -Vice: 380/150/H140 mm -Jaws: 115 x 20 mm, clamping width: 185 mm -Side tables: 500/500/H860 mm -Weight: 164 kg Nwodpsffyp Dofx Ai Ton

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief Nsdsp Stgnjpfx Ai Town LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Njdpfx Aiezr Ha Es Tswn Year of manufacture: 2007

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Nwsdpjzq A Ipsfx Ai Tsn

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Nsdpfx Aioyyygkj Town Power: 3,200 W

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. Nsdpfx Aisvzx Auj Tswn The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: new, Bench drill machine D 23 Pro 230V 25mm MK2 200-2440min-¹ OPTI-DRILL · V-belt drive via aluminum pulleys (cover with safety switch) · Emergency stop push button · Safety switch according to IP 54 · Drilling depth stop · Drill table tiltable ± 45° · Height-adjustable drill table via rack and pinion, with diagonally running T-slots and a surrounding coolant channel · Precision spindle bore · Very high runout accuracy · Drilling spindle with precision ball bearings · Height-adjustable protective shield with safety switch · 400 V version also includes right/left rotation · Other technical features: Weight: 58kg · Column diameter: 73mm Nwedpfo Ab Hrwex Ai Tjn · Clamping area: 280 x 245mm · Motor power: 0.75kW Length: 615 mm Drilling capacity: in steel: 25 mm Width: 330 mm Spindle speed: 200-2440 min-¹ Mains voltage: 230 / 50 V / Hz Weight: 58 kg Number of speeds: 12 Motor power: 0.75 kW Height: 1015 mm Spindle stroke: 80 mm Spindle mount: MK2 Model: OPTI-drill D 23 Pro 230 V Overhang: 180 mm

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Nwjdjzvgdlopfx Ai Ton Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, Precision vise, jaws B 80 mm, clamping width 110 mm, plate · Small vise with ball joint · Can be securely clamped using a clamping lever · 360° rotatable and 90° swiveling · Vise and clamping bracket or mounting plate made of lightweight metal alloy · Hammer-tone painted · Concealed steel spindle · Jaws open forward · With replaceable plastic or aluminum jaws Nwedpfj Ab Du Aex Ai Ten · Art. No. 4000 830 976 with aluminum turning/clamping blocks Jaw width: 80 mm Clamping depth: 52 mm Clamping width: 110 mm Design: Mounting plate