Used Beton Kubel 2000 Liter for sale (16,876)

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Nwsdpfx Aijwmw Daj Ton

Condition: used, CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, hermetically sealed, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, left-hand door stop, one-hand operation, lockable. Insert shelf: stainless steel, support area 970 x 980 + 500 mm load per shelf max. 35 kg total load with max. shelf load 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller Nwjdezg Twaopfx Ai Ten LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages RS 232 interface free switching channels for on-site control of the test item Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation and without additional devices. Dimensions: Test volume: 2000 liters Test chamber dimensions: height 900, width 975, depth 2200 mm External dimensions: height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Nsdpfjzlb D Sjx Ai Tjwn Press volume: 4989 l Press volume after expansion: 6080 l Cake thickness: 25 mm

Condition: excellent (used), mileage: 29,750 km, power: 162 kW (220.26 HP), first registration: 02/2002, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,680 mm, fuel: diesel, color: red, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 6,930 mm, total width: 2,380 mm, total height: 3,100 mm, permissible axle load (axle 1): 4,450 kg, permissible axle load (axle 2): 8,500 kg, Year of construction: 2002, Equipment: ABS, trailer coupling, = Additional Options and Accessories = - Leaf suspension - Air horn - Radio/CD player - Side door - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication - Tow hitch Nedpfxsz R Ucro Ai Tswn = Further Information = General Information Cab: double Technical Information Number of cylinders: 6 Axle Configuration Suspension: leaf suspension Front axle: Max. axle load: 4,450 kg; Tyre tread left: 90%; Tyre tread right: 90% Rear axle: Twin tyres; Max. axle load: 8,500 kg; Tyre tread inside left: 90%; Tyre tread outside left: 90%; Tyre tread inside right: 90%; Tyre tread outside right: 90% Weights Unladen weight: 6,670 kg Payload: 5,320 kg Gross vehicle weight: 11,990 kg Condition Technical condition: very good Optical condition: very good Further Information Contact Andre, Henri, or Andre for more information.

Condition: good (used), - Manufacturer: Lohenner, Germany - Material: Steel - Surface finish: Fully galvanized Nodpoy Sxqrofx Ai Tewn Dimensions: - Diameter: 1150 mm - Length: 2140 mm - Height, including supports: 1300 mm - Test certificates, ASIT/SVTI/TüV: All available - In very good condition

Condition: used, Applicable material: Concrete Njdpfx Aj Af R Rxsi Tewn

Year of construction: 2020, condition: like new (used), For sale: Certis Tendo 2000 arm wrapper – year of manufacture 2020 Certis Tendo 2000 pallet wrapper, manufactured by C&C Group in Italy. Suitable for wrapping palletized goods with stretch film. With this arm wrapper, the wrapping arm rotates around the pallet while the load remains on the ground. This makes the system particularly suitable for heavy or less stable pallet loads. Machine data: Brand: Certis / C&C Group Model: Tendo 2000 Year of manufacture: 2020 Serial number: C1901471M Power supply: 230 V Type: rotating arm wrapper Condition: little used Available documentation: Nwodpfx Aj Adz H Iji Tsn Instruction and maintenance manual Operating manual Parameter list Electrical diagram Parts list arm wrapper, rotating arm wrapper, pallet wrapper, pallet wrapping machine, stretch wrapper, film wrapper, stretch film wrapper, rotary arm pallet wrapper, rotating arm stretch wrapper, pallet wrapping machine, Dreharmwickler, Palettenwickler, Stretchwickler, banderoleuse à bras tournant, filmeuse palette, avvolgipallet, owijarka ramieniowa, used, second-hand, used, gebraucht, occasion, 2020, 230 V rotary arm pallet wrapper, rotating arm stretch wrapper, rotary arm wrapping machine, pallet stretch wrapper, pallet wrapping machine, stretch wrapping machine, stretch film wrapper, semi-automatic pallet wrapper, used pallet wrapper, second hand stretch wrapper arm wrapper, rotating arm wrapper, arm wrapping machine, pallet wrapper, pallet wrapping machine, film wrapper, film wrapping machine, stretch wrapper, stretch film wrapper, stretch film wrapper, pallet sealing machine, pallet packaging machine, semi-automatic pallet wrapper, used pallet wrapper, second-hand arm wrapper

Condition: like new (used), Vacuum tumbler SVT2000 Sind Capacity: 2000 liters Speed frequency: 3 to 15 turns Voltage: 380V / 50Hz Electrical Power: 6.6 kW Dimensions: 270 x 154 x 222cm Nwedowk H Tfepfx Ai Ten

Condition: used, Year of construction: 2000, machine/vehicle number: 48457-16, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Mobile Höcker Polytechnik dust extraction unit for extracting wood chips and dry dust from woodworking machinery. The unit is equipped with a large filter bag, an 180-liter collection bag, and swivel casters for easy movement around the workshop. Technical specifications: Manufacturer: Höcker Polytechnik GmbH Type / group: Gr. 3 Nwjdpsz Dv T Asfx Ai Ten Motor power: 2.2 kW Power supply: 230/400 V, 50 Hz Motor speed: 2,800 rpm Airflow capacity: 2,460 m³/h Extraction connection diameter: 160 mm Filter area: 3 m² Collection capacity: 180 liters Year of manufacture: 2000 Article number: 90303 Internal reference number: 48457-16 Condition: used, with normal signs of wear and tear and previous operation. The actual condition and scope of delivery are shown in the photographs. The machine can be inspected by prior appointment. Location: Gātciems, Latvia. We can assist with loading and arrange transportation within Latvia or to other European countries.

Condition: used, Year of construction: 2022 Nwedpfe Af R Tdox Ai Ton Field of application: Construction Applicable material: Concrete

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Width: 154 Height: 222 Nwodpeuu Rx Refx Ai Ten Electric power: 6.5 kW

Condition: good (used), mileage: 420,000 km, first registration: 01/1996, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, gearing type: mechanical, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 40 kg, loading space volume: 14 m³, Year of construction: 1996, Front axle: Max. axle load: 40 kg; Steerable; Tire tread depth, left: 40%; Suspension: Leaf spring suspension Rear axle: Double tires; Tire tread depth, left inner: 40%; Tire tread depth, left outer: 40%; Tire tread depth, right inner: 40%; Tire tread depth, right outer: 40%; Suspension: Air suspension Number of cylinders: 6 Hoses: Yes Njdpfx Aijz Rnkbj Tewn Technical condition: good Optical condition: good

Condition: new, Tank fire engine, DIN 14530 fire engines, Part 18, on a Unimog chassis, U323 model. NEW VEHICLE! DEMO VEHICLE! Available from June 2024. Nwjdo Afgaijpfx Ai Tsn 230 hp Automated manual transmission with off-road gearing 365 tires (off-road profile) Tire pressure control system Auxiliary heater Permanent all-wheel drive Balanced weight distribution between front and rear axles RAL 3020 paint and bumpers in RAL 9010 Firefighting centrifugal pump: FPN 10-2000 according to DIN EN 1028-2 Piston venting system, steering system Water tank for firefighting: 2200 liters Fiam compressed air system LED warning lights Quick-attack hose reel, shape-stable LED scene lighting on the vehicle Rear view camera COMPACT DESIGN! External width: 2.20 m Overall length: 6.00 m Vehicle height: 3.10 m Chassis with a 12-year warranty against rust! Price upon request, including the complete address of the municipality/city. Subject to prior sale!

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, distance between stands: 1,250 mm, type of input current: three-phase, position of the milling head: Vertical, overall weight: 14,000 kg, spindle motor power: 25,000 W, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS General Information Machine type: Portal milling machine Manufacturer: Nicolás Correa Model: EURO 2000 Year of manufacture: 2002 Retrofit: 2024 Machine weight: 14,000 kg CE marking: present Control System Control system: Heidenhain TNC 530 Handwheel: Heidenhain HR-410 Work Table and Working Area Work table: 2,000 × 1,000 mm Travel in X-axis: 2,000 mm Travel in Y-axis: 1,250 mm Travel in Z-axis: 650 mm Column spacing: 1,250 mm Nsdpfx Aj Aaytfji Town Spindle Spindle design: direct-drive motor spindle head Spindle power: 25 kW Spindle speed: max. 12,000 min⁻¹ Tool interface: HSK 63 Tool Changer Tool changer: 24 positions Coolant System and Chip Disposal Coolant system: external Internal cooling: through the spindle head Chip conveyor: present Axes and Rotary Table Rotary table/indexing table: stepless Additional axes: 4th and 5th axis Machine Dimensions Length: 6,500 mm Width: 3,600 mm Height: 4,000 mm EQUIPMENT Heidenhain TNC 530 control system Portable handwheel Heidenhain HR-410 Automatic tool changer with 24 positions External coolant system Internal coolant supply through the spindle head Chip conveyor Stepless rotary table or indexing table for the 4th and 5th axis Fully enclosed working area enclosure

Condition: used, MDR 2000 Moving Die Rheometer • Closed, bic conical chamber system • Fast microprocessor for temperature control • Torque measurement via friction-free torque transducer • High precision, high efficiency • Automation option for maximum productivity State-of-the-art vulcanization technology The MDR 2000 Moving Die Rheometer from Alpha Technologies has become the global standard for vulcanization technology. Two directly heated, bic conical tool halves with low mass provide fast and accurate temperature recovery. The oscillating lower tool half eliminates the need for a rotor, as in the Oscillating Disk Rheometer (ODR 2000). This results in faster temperature recovery and greater data accuracy. The resulting torque is measured by a torque transducer in the upper tool half, ensuring that friction forces from bearings and seals no longer affect the torque measurement. The torque signal is calibrated using a torsion spring rod with known values. This ensures long-term accuracy, repeatability, and reproducibility of the data. The unique closed chamber system enables above-average reproducibility and sensitivity to variations in the compound. Fast-responding temperature control is ensured by an optimized system. These properties, combined with a highly sensitive torque transducer and state-of-the-art microprocessor technology, offer the best in networking technology. Nedpfx Aozul Dbsi Town

Condition: used, CTS Climate Testing Chamber Type: C-70/1000-S CTS Climate Testing Chamber / Environmental Simulation Chamber Model: C-70/1000-S Water-cooled version For sale is a high-quality CTS climate testing chamber for precise temperature and climate testing in research, development, quality assurance, and industry. The unit is in used condition. See images for visual condition. Control panel, viewing window, and test specimen protection are included. Temperature and Climate Data: Test chamber volume: approx. 1000 liters Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min (heating) Temperature change rate: approx. 2.5 K/min (cooling) Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: Electrical connection: 400 V / 3/N / 50 Hz Rated power: 9.7 kW Rated current: 17.9 A Protection class: IP 22 Refrigerant according to nameplate: Pre-cooling stage: R404A – 2.3 kg Njdpfjy Iam Hjx Ai Town Cooling stage: R23 – 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: CTS control panel with LCD display Digital setpoint and actual value display Program operation Viewing window in the door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Side cable glands Glands approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile version on rollers Dimensions according to layout plan: External dimensions: approx. 2245 x 1270 x 1950 mm Installation dimensions: approx. 2350 x 1290 x 2000 mm Weight of test chamber: approx. 1000 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Layout plan available Quick start guide available For your security as a buyer: The following steps can be carried out in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: CTS Climate Testing Chamber C-70/1000-S Documentation as available Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement. Loading via forklift can be arranged. Changes, prior sale and errors in the technical data are subject to change. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2024, HORSCH MAESTRO 8 RX with PARTNER 2000 FT front tank, year of manufacture: 2024, operating hours: approx. 210 hectares, 8-row, working width: 6.00 m, row spacing: 75 cm, single-disc fertilizer applicator, AirSpeed overpressure metering system, microgranulate unit for placement in the seed furrow, seed rate control, fertilizer flow monitoring, individual row shut-off SECTION CONTROL incl. row spacing control, automatic soil-dependent coulter pressure adjustment AutoForce Pro, hopper capacity for corn: 70 liters per row, press wheel, wide V-press wheels, hydraulic track markers left/right, warning signs/lighting. HORSCH PARTNER 2000 FT, year of manufacture: 2024, operating hours: 210 ha, ISOBUS equipment, approx. 2,200 liter dual-pressure tank, hydraulic direct-drive fan, three-point linkage Cat. II/III, WorkLight Pro, operator terminal TOUCH 800, lighting. Offered price including 19% VAT. The location may change; please inquire about the current location before visiting. Subject to changes, errors and prior sale. (Internal: 1484 + 2137) Nsdj Ad Awuspfx Ai Tswn

Condition: used, Year of construction: 2008, The MAXDROP type machine is used for the production of various pastry products such as muffins, shortcrust biscuits, meringue cookies, sponge cakes, and others. Brand: MaxDrop 2000 Model: AL 200 Head width: 600 mm Recipe memory: up to 90 recipes Machine dimensions: 1100 x 1400 x 1375 mm Year of manufacture: 2008 Power supply: 400 V Installed power: 1.64 kW Weight: 400 kg Condition: used Njdpfx Aox Irkdsi Tewn Original technical documentation + CE declaration.

Condition: good (used), functionality: fully functional, empty load weight: 8,220 kg, maximum load weight: 24,780 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 10/1986, Year of construction: 1986, Good condition 29,000 liters 1 chamber Nwjdewkdnmopfx Ai Tsn DST 29/V2A

Year of construction: 2016, operating hours: 4,614 h, condition: used, functionality: fully functional, machine/vehicle number: Optimel OM2000, We are offering two used Optimel OM2000 potting machines, including Nordson MX4003 melting units, for sale. These machines are suitable for industrial applications in the field of hot melt potting / low-pressure molding, for example, for the protection and encapsulation of electronic components, connectors, and assemblies. The Optimel OM2000 is a proven machine series for medium to large-scale production and offers flexible application possibilities in industrial manufacturing processes. Available machines: System 1 Potting machine: Optimel OM2000 Year of manufacture: 2016 Melting unit: Nordson MX4003 Year of manufacture (melting unit): 2016 Operating hours: 4,614 h Price: €24,900 (negotiable) System 2 Njde Adqzhjpfx Ai Tjwn Potting machine: Optimel OM2000 Year of manufacture: 2016 Melting unit: Nordson MX4003 Year of manufacture (melting unit): 2017 Operating hours: 2,551 h Price: €24,900 (negotiable) Technical features of the Optimel OM2000 series: Siemens S7-1200 control system with touch panel Max. operating temperature: 250 °C Adjustable melting pressure: 5–40 bar Melting capacity: 2–15 kg/h (depending on the melting system) Electrical connection: 400 V / 50 Hz Power consumption according to data sheet: 4.5 kW Suitable for industrial series production Flexible integration into existing manufacturing processes The technical specifications refer to the OM2000 series according to the manufacturer's data sheet. The specific equipment of the machines offered may vary depending on the configuration. Prices and sale: Individual price: €24,900 (negotiable) per system Package price for both systems: €45,900 (negotiable) Both systems are preferably sold together. An individual sale is also possible. The machines can be inspected by appointment. If you are seriously interested or have questions about the equipment, condition, and availability, we look forward to hearing from you. Further information and technical documents can be provided upon request. Note: Sale of used industrial machines. The exact terms of sale will be agreed upon individually.

Condition: used, Albach Diamant 2000 Wood Chipper Year of manufacture: 06/2020 Engine hours: 5,730 h Rotor hours: only 2,213 h! Engine: Volvo TAD 1643 [770 hp / 566 kW] without Adblue (!) Rotor: GEN 7, 23 degrees Infeed width: 1,230 mm Infeed height: 980 mm Rotor speed: up to 420 rpm Max. throughput: 450 m³/h Accelerator: GEN2 Speed: 80 km/h Crane: Epsilon S110 Nwodpfx Ais Aftp De Tjn Max. reach: 10.1 m Load at 10.1 m = 1 t Grapple: Epsilon FG 31 Tires: Nokian 645/65 R42 high speed (80 km/h) Lift cabin 2x front supports Rockinger trailer coupling Central lubrication system Air hose reel + compressed air in the cabin 2x 230V sockets 2x fire extinguishers Remote control for discharge Dometic refrigerator/radio Camera for discharge and rear Co-driver's seat Dimensions: Length: 10.43 m Width: 2.55 m Height (raised cabin): 3.95 m (4.80 m eye level) Weight: 32,000 kg We explicitly request that you arrange an appointment! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. You can find more information on our website. Errors and prior sale excepted! ABS, automatic reversing system, road approval = Further information = Year of manufacture: 2020 Operating hours: 2,213 Please contact Tobias Ebert for further information.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 2 t, table width: 330 mm, table length: 350 mm, throat depth: 100 mm, air pressure: 6 bar, cylinder diameter: 28 mm, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Max. pressing force: 2t open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Nwedpfx Aiovbfbwj Ten Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Nodpsz Rk Hrefx Ai Tjwn Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. Nwsdoz Slk Aopfx Ai Ton • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 54 mm, turning diameter over bed slide: 390 mm, turning length: 762 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, overall weight: 1,100 kg, Colchester Triumph Gap Bed Lathe 30" (762mm) Between centres Spindle speeds 25-2000rpm Swing in Gap 580mm Swing over bed 387mm Nsdpfe Afd Rxex Ai Town Spindle bore 54mm Tailstock taper 4 MT Quick change tool post with 3 holders 2 Axis Digital Readout Coolant pump & system Power 3phase 400v 3 jaw chuck