Used Bevel Gear Motor for sale (26,710)

Condition: new, functionality: fully functional, machine/vehicle number: 01.3206969317.0003.00, power: 2.2 kW (2.99 HP), rotational speed (max.): 1,400 rpm, input frequency: 50 Hz, type of input current: AC, overall weight: 89 kg, torque: 1,700 Nm, protection type (IP code): IP54, Voltage: 230/400 V (three-phase current) Brake voltage: 400 V AC Nedpfx Akju Datqeujlb Insulation class: B This bevel geared motor is a powerful drive solution that is ideal for demanding industrial applications. With its robust design and high efficiency, this motor offers reliable performance at variable speeds. The integrated bevel gearbox ensures a compact design and enables optimum power transmission. It is particularly suitable for conveyor technology, mechanical engineering and other industrial applications where precision and durability are required.

Condition: like new (used), 2 Pcs. “Bauer CFG13-121/D6A4” for Sale Manufacturer: Eberhard Bauer Type: CFG13-121/D6A4 Power: 18,5 kW Voltage: 380 V Amperage: 39 A Hertz: 50 Hz RPM in/out: 1.460 / 33 Shaft ø out: 95 mm (Hollow) Nljdeg Stt Ajpfx Akusb

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm Nlsdpfxeruakgs Akueb 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm Njdovr Hf Ejpfx Akujlb inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Njdpfx Akoxaqa Sjuslb Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Nledoxdfazopfx Akuob Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Nljdpoxdfa Uofx Akuob Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Nlsdpfxsrtrzdo Akuob Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Nlodpfxortryko Akusb Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm module 0,5 - 25 centre distance 750 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m Nlodpfx Aksy Umi Isuob worm testing roll-machine

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 66 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 50 mm -Protection class: IP 33 -Foot damaged, see picture -Dimensions: 910/294/H350 mm -Weight: 115 kg Nedpfxedkqg Ho Akuslb

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: VEM, Geared motor type ZG3 KMRA 80 G 6 Nodpfx Akeh Ezffjujlb -Speed: 31.5 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Number: 1x motor available -Price: per piece -Dimensions: 485/205/H235 mm -Weight: 25 kg/pc.

Condition: good (used), Geared motor, electric motor, electric geared motor Nljdey Tuhpspfx Akujb -Manufacturer: SEW-Eurodrive, geared motor -Type: SAF 37 DR63M4/TF i = 86.36:1 -Speed: 15 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 -Dimensions: 335/190/H145 mm -Weight: 11.3 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor Manufacturer: Nord, geared motor -Gearbox: Type SK12-71 L/4 i= 31.19 -Speed: 45 rpm -Engine: Nord type SK 71 L/4 -Power: 0.37 kW -Protection class: IP54 -Shaft: Ø 25 x 50 mm Nedpsy Tka Iofx Akuolb -Dimensions: 455/190/H170 mm -Weight: 16.4 kg

Condition: used, functionality: fully functional, power: 5.5 kW (7.48 HP), Type: R143 R82 DV132S-4TF Power: 5.5 kW Motor speed: 1430 rpm Nledpoy T Ndxjfx Akuob Output speed: approx. 4 rpm Torque: approx. 10,000–12,100 Nm Voltage: 220Δ / 380Y Design: B3 Protection class: IP54 Weight: approx. 500 kg

Condition: excellent (used), SEW Eurodrive RF73DT80N-4BM gear motor 0.75 kW 1380/31 rpm B5 with brake Njdpeywn Ukefx Akuslb

Condition: excellent (used), For sale: Geared motor from the renowned German manufacturer KEB Antriebstechnik. Robust industrial design intended for continuous operation in demanding conditions. Njdpfjywaq Dox Akuslb The unit delivers high torque at low speed, ideal for machinery, conveyors, feeders, and industrial applications. Technical data Manufacturer: KEB Antriebstechnik Model: ZG 2 KPR 71 G 6 TS 140 G 92 Power: 0.55 kW Output speed: approximately 20 rpm Torque: 259 Nm Voltage: 230/400 V Frequency: 50 Hz Protection rating: IP55 Mounting type: B3 foot-mounted Weight: approximately 26 kg Dimensions Shaft diameter: approximately 30 mm Shaft length: approximately 60 mm Condition Used Technically fully functional Visible signs of use and surface rust on the shaft Visual condition as per photos

Condition: new, For sale: professional gear motor from the renowned German company SEW EURODRIVE. The units come from warehouse stock – brand new, unused (warehouse surplus). They may show minor storage marks visible in the photos. Robust industrial construction designed for continuous operation in demanding applications. Gear motors are equipped with a helical gear and an electromagnetic brake (BMG), making them ideal for applications requiring precise stopping. Technical data: Manufacturer: SEW EURODRIVE Model: RF77 DT80N4/BMG/HF/ES1S Power: 0.75 kW Supply: 3~ 380–415 V (50 Hz) / 415–460 V (60 Hz) Speed: approx. 1368 / 1680 rpm Protection class: IP55 Brake: YES (BMG) Brake torque: 10 Nm Mounting: IM M4 Weight: approx. 58.9 kg Country of manufacture: Germany Condition: New – warehouse stock Never used Possible minor storage marks Fully operational Nodpfeyviw Rex Akuelb Additional information: Price per unit

Condition: used, overall weight: 30,000 kg, We offer used geared motors for sale. Brands include SEW, Nord, Siemens, Lenze, and Demag. We have over 1,600 units in stock. Special package prices are available for dealers. If you are interested, please contact us. Total weight approximately 30 tons. Large quantities available. We are confident that you will find something suitable for your needs. An Excel file can be sent upon request. We prefer to sell in packages. Nsdpfjy Tg Saox Akuelb Price per unit: €100-150 net.

Condition: good (used), Year of construction: 2016, Geared motor, electric motor, electric geared motor, worm geared motor, flat geared motor Manufacturer: Nord, geared motor -Transmission: Type SK 2282A/3D-100LH/4 3D TF i= 24.97 -Speed: 57.84 rpm -Engine: Type SK 100LH/4 3D TF -Power: 2.20 kW / 1445 rpm Nsdpfxjtxklgj Akuslb -Protection rating: IP55 -Shaft: Ø 35 x 140 mm -Number: 3x motors available -Price: per piece -Dimensions: 455/360/H270 mm -Weight: 53 kg/unit

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 161 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 35 mm -Protection class: IP 55 -Number: 2x engines available Nedpfx Akschk Imjujlb -Price: per piece -Dimensions: 520/270/H300 mm -Weight: 45 kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, variable speed geared motor Nedpfewl Uxlox Akujlb -Handover: in its current condition as inspected -Condition: Functional, without brakes -Manufacturer: Nord, adjustable geared motor -Type: SK 42 F-R210 U-112 M/4 BRE -Speed: 14.5-109 rpm -Engine: Type SK 112 M/4 BRE60 -Power: 4.0 kW -Protection rating: IP54 -Shaft: Ø 45 x 90 mm -Brake: 60 Nm -Dimensions: 840/580/H285 mm -Weight: 105 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Lenze, adjustable geared motor with brake -Adjustment gear: 11.432.10.08.1 54 - 11 rpm -Brake: 14.448.08.1.0.8 8 Nm -Motor: Type B7KB4-044H 0.25 kW / 1390 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Number: 3x geared motors available Nsdpfxettimbs Akuslb -Price: per piece -Dimensions: 410/280/H200 mm -Weight: 16.7 kg/pc.

Condition: refurbished (used), functionality: fully functional, overall weight: 411 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, input voltage: 400 V, Used: one SEW-Eurodrive gear motor. Quantity: 1 Euro pallet with 1 gear motor Nsdotp S Nmspfx Akuelb Packaging and loading included.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor Nodpechbvyofx Akuelb -Speed: 18 rpm -Power: 0.37 kW -Design: B5 angle -Shaft diameter: 35 mm -Protection class: IP 54 Quantity: 1 piece available -Dimensions: 490/261/H300 mm -Weight: 38 kg