Used Bihler Punching And Bending Machine for sale (69,610)

Condition: good (used), Year of construction: 2002, functionality: fully functional, punching force: 20 t, TECHNICAL DETAILS Machine capacity: 200 kN (20 t) Air pressure: 5 bar Air flow rate: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travelling ranges: Machine travel range without repositioning: 1,250 mm x 2,100 mm Processing Max. sheet thickness with ball bearing table: 6 mm Max. sheet thickness with brush table: 3 mm Max. weight per table: 100 kg Accuracy Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling cycle, feed 1 mm: X920 / Y920 Tools Minimum programmable step: 0.01 mm Number of tools: 31 Godpfxsy Symus Ahvoiu Max. tool diameter: 88.9 mm Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: good (used), Year of construction: 1985, FOR SALE: Automatic Stamping and Bending Machine BIHLER RM-30 High-performance equipment for the automatic production of complex metal parts from wire or strip material. Identification and Brand Gjdey Shgpepfx Ahvsiu Brand: BIHLER (Otto Bihler Maschinenfabrik, Germany). Model: RM-30. Year of manufacture: 1985. Machine number: 23589. Technical Specifications (Model RM-30) Maximum strip width: 32 mm. Maximum wire diameter: 3 mm (mild steel). Feed length (standard): Up to 120 mm. Nominal press force: 70 kN (7 tons). Production speed: Adjustable, up to 350 parts/minute (depending on complexity). Number of slides: Up to 5 standard bending units. Equipment and Configuration Control system: Separate control panel with user interface. Kinematics: Radial cam drive for maximum precision and repeatability. Press unit: Integrated for cutting, punching, or marking operations prior to bending. Safety: Machine equipped with protective guards and emergency stop. Advantages Versatility: Enables the production of highly complex parts in a single cycle. Bihler reliability: Renowned worldwide for robust construction and long-lasting mechanical components. Precision: Ideal for the electronics, automotive, and connector industries.

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending • Programmable blank holder Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm Giodpsh Dwqhjfx Ahvou • Software Type: JOBS4P4.DIARIO Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: good (used), Brand Boschert Model EL 500 Digital Year of construction 2009 Press force 28 tons Throat depth 180 mm Punching capacity 40 mm in 6 mm Worktable size 500x1000 mm Number of strokes 180 pcs Gisdpfx Ajw Hyc Sohveu Dimensions 2400x1580x1540 mm Weight 2000 kg Power 5 kW

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, pressing force: 32 t, working height: 200 mm, controller model: Siemens 840D, working length: 2,150 mm, TECHNICAL DETAILS Bending length: 2,150 mm Maximum bending height: 200 mm Minimum length/width between bends: 160–350 mm Pressing force: 32 t MACHINE DETAILS Control: Siemens 840D Gijdpfjy D Ihwjx Ahvsu Dimensions & Weight Dimensions (L x W x H): 8,500 x 7,000 x 2,850 mm Weight: 30,000 kg EQUIPMENT Automatic tool changer Manipulator Reverse bending cycle Sheet centering system Additional top tools Loading and unloading system

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, pressing force: 30 t, We offer this very good Bihler GRM 80 punching and bending machine, year of construction 1989. with 5 slides, 30T press, straightener, feeder with decoiler Giedpfx Aheywty Ejvsu Tooling is not included If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feeder Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Machines Bracket and Brush Motor with Mounted W32/1-32 Tool Soundproof Cabin Drums of Copper Wire with Stamped Parts Control Cabinet Item Condition: Very Good Manufacturer's Description, Deviations Possible. You are purchasing the machine as shown in the pictures. Giedpfsg T S Tajx Ahveu Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feed Plain Text Display Press Force Monitoring Wire Straightener Godpfx Ahjg T S Tdsvsiu Bosch Stripping Devices Bracket and Brush Motor with Attached W32/1-32 Tool Soundproof Cabin Barrels of Copper Wire with Punched Parts Control Cabinet Technical Specifications: Drive Power: 7.5 kW Speed (min. - max.): 40-250 rpm Press force / punching unit: 200 kN Longitudinal feed: 250 mm Longitudinal strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more punching and bending machines - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2006, Bihler RM 40E stamping and bending machine Compact machine system for the production of stamped and bent parts from strip and wire. Quick tool clamping system User-friendly P CNC 4E machine and process control Compatibility with RM 35, RM40, and RM4 tools Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Type: RM 40E No. 27907 Year of manufacture: 2006 1x 184-01-0022.0 Basic machine RM 40 including central lubrication and pneumatic system including P-CNC 4E control according to installation plan 184-00-0085.3 including tool: 484 0027 2x 142-04-0347.0 Wide slides (items A9 and A16) 1x 142-55-0007.0 Angle lever unit with right lever (item A7) Without feeder, press, and center punch Gijdpfx Asg Inzkehvju including light barrier for personnel protection Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 2001, Punching machine Manufacturer: Trumpf • Machine type: Trumatic 500 • Year of manufacture: 2001 • Power-on hours (counter 1): 81,174 h (as of 03.02.2026) • Operating hours, punching head on (counter 2): 45,972 h (as of 03.02.2026) • Giedeymxt Ispfx Ahvou

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Gisdpfxetvar Io Ahvou

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software Gjdpjxn Rviofx Ahveiu AP100 2D CAD Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. Godpfew Hww Hsx Ahvsiu We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. The standard tools are listed in the attached inventory. I can send it to you via email.

Condition: ready for operation (used), Year of construction: 1987, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 21104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, compressed air connection: 6 bar, Bihler Automatic Machine M35 – Year of manufacture 1987 – 7 t press force – ready for operation For sale is a Bihler automatic machine, model M35, year 1987, in very good and well-maintained condition. The machine features a press force of 7 tons, a compressed air connection with 6 bar, and has approximately 70,000 operating hours. Godsx Tukqopfx Ahvsiu The automatic machine is fully functional and immediately ready for use. Bihler machines are renowned for their robust, long-lasting construction and reliability in industrial applications. The M35 is ideally suited for stamping, bending, and forming operations. The machine can be inspected under power in our workshop by prior appointment. Spare parts are still readily available.

Condition: ready for operation (used), Year of construction: 1979, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: 24104, working range: 250 mm, feed length X-axis: 170 mm, overall weight: 1,600 kg, total height: 1,860 mm, type of input current: three-phase, pressing force: 7 t, total length: 2,000 mm, total width: 2,500 mm, table width: 184 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 8 A, punching force: 7 t, control cabinet width: 410 mm, control cabinet length: 630 mm, control cabinet height: 1,320 mm, compressed air connection: 6 bar, With 70,000 operating hours, it has certainly seen considerable use, but this is not an unusual figure for machines of this type in industrial operation – many remain productive for years with far higher hours if they are properly maintained. Full functionality is assured – the drive has been replaced once. On the positive side, the machine is fully operational, proven in industrial environments, robust, and there are still many spare parts available for older Bihler machines. Gedpox Ttb Ujfx Ahvoiu

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Gedpfx Aeh T Ulyjhvjiu Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm Gijdpfx Ahsxzk I Sevsu sheet width 40 mm

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. Gsdpfxjxurhge Ahvjiu We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. The standard tools are listed in the attached inventory. I can send it to you via email.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender Gsdpfxswk Rlxs Ahveiu roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 1,600 mm, throat depth: 400 mm, operating speed: 50 mm/s, overall weight: 3,500 kg, total length: 2,350 mm, total width: 1,700 mm, total height: 2,220 mm, warranty duration: 24 months, Equipment: CE marking, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Gijdpfx Ajwzqx Hehvou Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: good (used), Year of construction: 1988, functionality: fully functional, WE OFFER AN POWERFULL MANDREL TUBE BENDING MACHINE IT CAN WORK UP TO 110mm tubes bending. MACHINE CAN BE AS WELL RETROFFITTED TO A CNC CONTROL...WITH ADDITIONAL SEVERAL SERVO MOTORS, TO ROTATE HEAD AND MOVE FORWARD. IT HAS CLAMPING SISTEM AND ALL RAILS SAM AS FULL CNC. Machine comes with a lot of tools accessoriess. Machine just turn on and work, ready for operation, Gijdevk I Thjpfx Ahvou Tools from 60 up to 100mm 6 SETS OF TOOLINGS INCLUDED + MANY ACCESSORIESS AND TOOLS We can organize transport and loading.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-3A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Godpey Uuw Tofx Ahveiu Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours EQUIPMENT Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Giodpfjza Urgjx Ahvou Workpiece weight max.: 230 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 070804, punching force: 16 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,070 mm, travel distance Y-axis: 1,280 mm, punching diameter: 76 mm, TECHNICAL DETAILS Punching force: 165 kN Working area: 2,070 x 1,280 mm Giedpfozapqdox Ahvsu Sheet thickness: 6.4 mm Workpiece weight: 150 kg Punch diameter: 76.2 mm X-axis speed: 80 m/min Y-axis speed: 55 m/min Control system: CC 220 MACHINE DETAILS Machine weight: approx. 8,000 kg

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster Gisdpfey U U Npsx Ahvou