Used Binder Cb 260 O2 for sale (5,376)

Condition: like new (used), Year of construction: 2024, Binder CB 260 Incubator with O2 control The incubator is unused and originally packaged. Model CB 260 | CO2 Incubators with Thermal Sterilization and Sterilizable CO2 Sensor Advantages • Safety thanks to maximum protection against contamination of cell cultures • Reliability due to consistent comfort conditions for cells • User-friendly thanks to easy routine cleaning and convenient operation • Cost-effective operation without consumables Hedpfoxaungox Algou PRODUCT DESCRIPTION The high-performance and versatile CB CO₂ incubator is suitable for cell testing in substance research and medical studies. With a wide range of options and accessories, the BINDER incubator easily fulfils complex cultivation tasks or individually specified growth conditions at low oxygen concentration. KEY FEATURES • Optimized dual-chamber humidification system with anti-condensation protection • Proven anti-contamination concept with 180°C thermal sterilization • Hot air sterilized CO₂ sensor with single-source infrared technology • Seamless inner chamber made of stainless steel with stainless steel bead slide-in supports • Fanless interior with Venturi CO₂ gas mixing nozzle • Intuitively operated touch controller • Internal measurement data recording system, data export via USB interface in a common format • Fault diagnostics system with visual and audible alarm Connections: Ethernet, USB, volt-free alarm contact CO₂ Fail Safe System for pH safety of cell cultures

Condition: excellent (used), Incubator Type: Binder CB 210 CO² / 9140-0013 Hjdezgbtcepfx Algsu Technical data Temperature range: 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Internal volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2018, turning diameter over cross slide: 520 mm, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 110 mm, spindle speed (max.): 2,000 rpm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 110 mm, Equipment: documentation/manual, CNC LATHE COMEV PICODUE EVO 260×1500 – Year 2018 – Operational – Turin (TO) Flat-bed CNC lathe COMEV Picodue EVO, model 260×1500, year 2018 (serial number 8051), in good condition and fully operational. One-piece cast iron construction with induction-hardened and hand-scraped prismatic guideways. High-quality Italian manufacturing. Available for inspection and testing by appointment in Turin. Main technical specifications: • Max swing over bed: 520 mm • Max turning diameter: 260 mm • Max swing over carriage: 285 mm • Distance between centers: 1,500 mm • Spindle bore: Ø 110 mm • Spindle nose: Cam Lock 8" (A2-8") Hedoy A Typepfx Algeu • Spindle speed: 0 – 2,000 rpm (stepless) • Motor power: 12.5 kW (16.8 kW peak) • Rapid traverse X / Z: 10 / 10 m/min • Precision ground and preloaded ballscrews: ISO 5 – zero backlash • RAPID Original quick-change turret – 4 positions • CNC control: Z32 Delectron / COMEV • 15" color touchscreen display • ISO / conversational / teach-in programming • Connectivity: USB – network – remote diagnostics • 2 controlled axes: X – Z • CE compliant | Year: 2018 Machine available for inspection and testing by appointment.

Condition: excellent (used), Binder MK 115 E3.1 Temperature Cycling Chamber Device Data Manufacturer: Binder Type: MK 115 E3.1 Article Number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Suitable for dynamic temperature tests and rapid temperature changes. Used in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature profiles High precision and reproducibility Features MCS controller with program memory Adjustable ramp functions Temperature selector limiter Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface Feedthrough Ø 50 mm (left) Stainless steel interior with insert 4 rollers (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Fast temperature changes (temperature cycling mode) Interior volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight approx. 260 kg Condition: Used. Optical and technical condition, see pictures. Scope of delivery: Binder MK 115 temperature cycling chamber Insert / interior fittings Inspection possible by arrangement. Loading and transport can be arranged upon request. Subject to change and prior sale. Hsdpfx Asy H Hvlslgju If you have any questions, please contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, FOR SALE AN NICE TRUMATIC 260 WITH COMPLETE TOOLINGS Hjdpfx Aevkda Djlgeu

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Hsdpfx Alozt H Npegeu Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: like new (used), Device as new ex demo. Description Hodpfx Ajwfh T Aolgsu The Binder CO2 incubator type CB210 is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used, among others, in tissue bioengineering, in vitro fertilization (IVF) clinics and teaching hospitals. The Binder CB210 also contains six compartments. The amount of CO2 is measured using a built-in infrared sensor. The outer door is made of stainless steel. In addition, this CO2 incubator is equipped with six shelves and forced convection. Technical data Voltage: 230 V, 50/60 Hz Current: 6.6 A Power: 1.5 kW CO2 control range: 0 – 20% Temperature range: approx. 7 °C above ambient temperature up to 60 °C External dimensions (W) x (D) x (H): 74 x 79 x 106 cm Internal dimensions (W) x (D) x (H): 58 x 44 x 75 cm

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber for professional heat and cold tests in industry, research, development, and quality assurance. The Binder MK series temperature test chambers are particularly suitable for cyclic temperature tests and reproducible tests under defined environmental conditions. The test chamber enables temperature tests in the range of -40 °C to +180 °C and represents an efficient alternative to individual custom solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Hedpey Nic Hofx Algou Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x feedthrough Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Optical condition according to pictures Normal storage and signs of wear present Important note: All information has been compiled to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Binder Temperature Test Chamber Hedpfx Ajy Nicmslgeu Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber designed for professional heat and cold testing in industrial settings, research, development, and quality assurance. The temperature test chambers from Binder’s MK series are particularly suited for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature testing within a range from -40 °C to +180 °C, providing an efficient alternative to custom-built solutions. Technical specifications: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x access ports Ø 70 mm 1 door 2 standard shelves / up to a maximum of 6 shelves possible Electrical data: Rated voltage: 400 V Line frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: Approx. 320 kg Condition: Used Scope of delivery: As shown in images Viewing by appointment possible. Loading can be arranged. Sale without warranty. (Specifications and technical details subject to change and error.)

Condition: excellent (used), Binder Model: Binder MKT 240 E3 Climate Test Chamber / Temperature Simulation Chamber –70°C to +180°C | 400V For sale is a professional environmental simulation chamber from BINDER, model MKT 240 E3. This unit is ideally suited for temperature testing in industry, research, quality assurance, as well as electronics and material testing. Features: - Temperature range approx. –70°C to +180°C - 240 L usable capacity - 400V 3-phase power supply - Power consumption: 6.5 kW - Precise microprocessor control - Low-temperature technology with R404A / R23 refrigerants - Heavy-duty industrial design - Made in Germany Technical Data: Model: MKT 240 E3 Voltage: 400 V / 50 Hz / 3~ Power: 6.5 kW Rated current: 11.3 A Max. temperature: 180°C Refrigerant: R404A / R23 Max. operating pressure: 25 bar Interior dimensions: approx. 600 x 650 x 600 mm External dimensions: approx. 925 x 1,825 x 865 mm Weight: approx. 320 kg Condition: used Hodpfx Ajylxvyslgeu Scope of delivery: (see picture) (Specifications and data are subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. Hjdpfx Aljzg Dx Uogou The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Year of construction: 2003, condition: good (used), functionality: fully functional, Equipment: documentation/manual, ITALMATIC Hsdpfxey N Ubbe Algju Autoclave AIT ø 2600x5000 year 2003, in good condition, available now, fully functional P.S.: 13 barg Tmin/Tmax: +20 / +175 C Volume V: 33900 litres Fluid group 2: AIR Module: B+F Test Pressure TP: 20,7 barg CAT.: IV Inspection is possible by appointment.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, sheet thickness (max.): 32 mm, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,500 mm Max. material thickness: 32 mm MACHINE DETAILS Drive system: CNC Control system: Beckhoff Hjdpfx Ajz Ebclelgeu Resonator manufacturer: Hypertherm Resonator type: Powermax 105 Connected power: 16.8 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Shipping weight: 3,000 kg Shipping packages: 1 unit EQUIPMENT Various accessories Spare parts Note: The machine is sold without a dust extraction system.

Condition: ready for operation (used), KUKA rotor with binder 86 61104H23 brake for 1FK7034-5AZ91-1ZZ9-Z S09 motor, the screw in the thread of the rotor is torn off, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Hedsu Tm E Nspfx Algeu

Condition: like new (used), max. width of grinding wheel 77 mm diameter / bore of grinding wheel 400 / 56 mm - Klingelnberg grinding disc holder (627.020.006) outer diameter Ø 260 mm / inner diameter Ø 56 mm Hodpfxexgv Afj Algeu - incl. grinding disc from Carborundum dilumit Outer diameter Ø 400 see pictures technical drawing

Condition: good (used), Eurotecnica 425 CUT Perfect Binder Hsdjzz Hftjpfx Algou This machine is in perfect technical and visual condition and was used as a backup for the BQ-470 binder. Machine features: – automatic jaw clamping – disc milling with additional scoring units – infeed jogging device – side gluing – control panel – fume extraction from the gluing unit – trim extraction + external vacuum – automatic cover clamping 230V power supply The kit includes glue to start with.

Year of construction: 2010, condition: good (used), Power chuck for vertical and horizontal CNC lathes Manufacturer: SCHUNK, Type: ROTA NCO260, Year of manufacture: 2010 Diameter 260 mm with intermediate flange diameter 220 mm Hsdjikzy Dopfx Algju Spindle nose conforming to DIN 55028 / A6 Thread in draw rod: M24 N max: 4500 rpm In good condition. 2 units available. Price is per unit.

Condition: used, -External dimensions: 2600x2900x2110mm -Internal dimensions: 2400x2700x1950mm -Wall thickness: 80 mm -Temperature: -2+8 ºC / -18-23 ºC -Refrigerant: R452A -Climate class: 5 -Pre-assembled refrigeration unit on the panel -Automatic condensate water evaporation -Internal lighting -Panel finish in pre-painted sheet metal, specially designed for food use, light grey colour -300mm gaps with panels of 300, 600, 900 and 1200mm -Panel interlocking system with double-latch hooks -Rounded doors and interior corners cut at 45º -Ergonomic handle with lock and safety release system -Pressure balance valve -Stainless steel floor with non-slip surface -Reversible door, self-locking at 90º, available in 2 sizes, with clear opening of 600 and 700mm -Hinges with sloped system Hsdox Eyhfjpfx Algeu -Insulation in CFC-free polyurethane, high-pressure injected, with density 41 Kg/m³

Condition: used, Year of construction: 2021, Format: 0x0 Speed: 150 pieces per hour Power: 230 V (A.C.), 50/60 Hz Net Weight: 45 kg Measurements: (LxWxH): 50 x 75 x 35cm Equipment: Hedjyxqwdopfx Algsu Mechanical speed: 150 pieces/hour pneumatic drive height adjustable table heating plate for preheating glued bindings movable plate heated rounding book block thickness of 8-80 mm book block height max. 520 mm

Condition: excellent (used), Offer consisting of: Equipment Collating machine * Müller Martini ZTM 1571 with ASIR * 14 stations * Year of construction 2001 * 1 manual station * Outfeed gate 1572 (year of construction 2005) * 1 positioning element Perfect binder Acoro A5 * Milling and spine processing station * Hotmelt spine gluing unit with an 80-liter pre-melter * Hotmelt side gluing unit with an 18-liter pre-melter * Drum transfer feeder * Pressing station * Lay-down device * Drying section approx. 30 m Three-knife trimmer Müller Martini Merit-S * Year of construction 1998 * Infeed on the right * Pressing ram * Cutting cassettes No. 1–21 * 2 sets of knives Cross cutter CB-16 * Year of construction 1997 * Mobile base machine * Infeed belt with top belts * Turret for stack heights up to 240 mm * Pneumatic slide opening * Retractable ejector Additional equipment * Nordson PUR pre-melter (year of construction 2001) * PUR spine gluing unit * Special spine processing “Fibre Rougher” (new part) * Additional sets of knives for the three-knife trimmer Notes * Compressed air supply (6 bar), compressed air, vacuum and chip extraction required on site. * Inspection possible at any time by appointment. * Assistance with loading can be arranged. Hedezivbajpfx Algsu

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Hsdpfx Asyhlrmjlgsu

Year of construction: 2026, condition: like new (used), BINDER KBF 470 – climate chamber – 2026 – like new condition For sale: a professional BINDER KBF 470 climate chamber, manufactured in 2026. The unit is in excellent, virtually factory-new condition. Protective elements from the transport are still attached to the housing and control panel. Device specifications: * Manufacturer: BINDER GmbH, Germany * Model: KBF 470 * Year of manufacture: 2026 * Chamber capacity: approx. 470 l * Maximum temperature: 100°C * Power supply: 220–240 V / 50–60 Hz * Power: 1.40 kW * Max. working pressure of the system: 11 bar * Refrigerant: R600a * Control: modern, touch-screen BINDER controller * Condition: like new / virtually unused The KBF 470 model is designed for precise research under controlled temperature and humidity conditions. It is suitable for use in laboratories, quality control, the pharmaceutical, cosmetic, and food industries, as well as for product stability tests. Hjdpfx Aez Dufdelgeu The greatest advantage of the offered unit is its year of manufacture (2026) and condition, which is close to that of a brand-new device.

Year of construction: 2025, condition: like new (used), Binder MKF 720 E5 Climate Chamber, year 2025. Brand new, unused chamber with 3-year warranty on spare parts. The Binder MKF 720 E5 is a professional climate/environmental chamber designed for stability studies, temperature, and climate testing in compliance with DIN and IEC standards. The E5 series is part of Binder’s latest generation, featuring a touchscreen interface and advanced program control. Key features: * Temperature range: -40°C to +180°C * Humidity range: 10–98% RH * Chamber volume: approx. 734 liters * APT.line™ preheating chamber technology * Ultra-fast temperature changes * Humidity control via capacitive sensor + steam humidification Hedpjy Sg Nvjfx Algju * Binder E5 touchscreen controller with segment and time programming * Integrated data logger + data export via USB * Ethernet interface * Heated inspection window with LED lighting * Automatic water supply and drainage management * Stainless steel interior chamber * Compressor cooling * Refrigerant: R-452A

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, product height (max.): 450 mm, product height (min.): 90 mm, product length (min.): 230 mm, product length (max.): 800 mm, product width (max.): 500 mm, product width (min.): 120 mm, Equipment: documentation/manual, The production line is a complete system suitable for packaging all types of AFH tissue paper products. The line begins with a conveyor belt which serves as a buffer. The end of the conveyor belt can be lowered, enabling the machine to handle all types of hand towels. Following the conveyor belt is an Italian-made MAC DUE stacker, which is capable of stacking toilet roll in 1, 2 or 3 layers. This is followed by another conveyor belt, which connects the stacker to the packaging machine. Next comes the CB 150A universal, fully automatic packaging machine, designed in Italy for packaging AfH tissue products. Hsdpozvym Tefx Algju The packaging machine is highly flexible, easy to set up and operates automatically. The maximum packaging speed is 5 packs per minute. Following the packaging machine is a shrink tunnel, which is integrated into the packaging machine. The MAC DUE HMI is a new DELTA model. The CB 050A packaging machine’s PLC (OMRON) comes with a new program; the electrical cabinet was rewired in 2022, and a diagram of this has also been drawn up, which I will provide with the machine. This packaging machine’s HMI is also a new Delta model. I will provide the source programs for both the HMI and the PLC with the machine. The production line was dismantled on 12 July 2026 due to the purchase of a new machine. The machine is packed and in storage, ready for delivery at any time. Commissioning can be arranged on request, but it is straightforward to install and I can also provide online support. Numerous videos have been made of the machine.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2005, loading space length: 13,630 mm, loading space width: 2,470 mm, loading space height: 2,710 mm, total length: 13,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 9,010 mm, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle - SAF Assen = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Weights Empty weight: 7.700 kg Carrying capacity: 34.300 kg GVW: 42.000 kg Hedpfx Aoz Hbrcolgsu Identification Registration number: OJ-65-BK