Used Binder Rrk 640 -850 Kw for sale (37,766)

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only Dedpfx Adey Dfd Nsrscn with hydraulic feed system maximum thermal output up to 850 kW suitable for dry material

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Dcodpfxjyhlrme Adron

Condition: excellent (used), Year of construction: 1995, heating capacity: 200 kW (271.92 HP), We offer a heating system from the renowned Austrian company BINDER. Boiler with a heating output of 200 kW TYPE RRK 150 Dcodpfx Adoxalfiorjn Stove for biomass, bark, wood chips, and sawdust. Complete set with pumps and valves

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Dcjdpfxozg Dx Uj Adron Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, BINDER Vacuum Drying Oven with Pump Module BINDER VD 56 + VD-M 53 Vacuum drying oven up to 220 °C with pump unit and BINDER VAP 1 vacuum pump. For sale is a used BINDER VD 56 vacuum drying oven from the year 2023, including a matching BINDER VD-M 53 pump module and BINDER VAP 1 vacuum pump. The system is suitable for the gentle drying of temperature-sensitive materials under vacuum conditions, as well as for applications in laboratories, research, development, quality control, and industrial process technology. Technical data: Manufacturer: BINDER GmbH Model: VD 56 Device type: Vacuum drying oven Year of manufacture: 2023 Article number: 9630-0002 Version: VD056-230V Made in Germany Temperature range: +9 °C above ambient temperature to +220 °C Internal volume: 55 liters Heating time to 100 °C: approx. 80 min Spatial temperature deviation at 100 °C: ± 1.2 K Temporal temperature deviation at 100 °C: ± 0.1 K Vacuum data VD 56: Leak rate: 0.01 bar/h Vacuum connection: small flange DN 16 Measuring port: small flange DN 16 Electrical data VD 56: Rated voltage: 200–230 V Mains frequency: 50 / 60 Hz Rated power: 1.4 kW Rated current according to nameplate: 6.1 A Phase: 1N~ Protection class: IP20 Dimensions VD 56 without attachments and connections: approx. 638 × 461 × 815 mm (W × D × H) Internal dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net device weight: approx. 96 kg Load capacity: Maximum load per insert: 20 kg Maximum total load: 60 kg Number of inserts standard / maximum: 1 / 5 Pump module: Manufacturer: BINDER GmbH Type: VD-M 53 Device type: Pump module for vacuum drying oven Article number: 8012-1943 Year of manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current consumption: 8.0 A Phase: 1N~ Protection class: IP20 Dcodoz Ikx Uopfx Adrjn Made in Germany Vacuum pump: Manufacturer: BINDER GmbH Type: VAP 1 Device type: Vacuum pump Article number: 5013-0217 Year of manufacture: 05/2023 Pumping speed: 2.0 / 2.2 m³/h Ultimate pressure: < 7 mbar Voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 1.6 / 1.5 A Protection class: IP40 Made in Germany Equipment: BINDER VD 56 vacuum drying oven BINDER VD-M 53 pump module / pump unit BINDER VAP 1 vacuum pump Digital controller with display of pressure and temperature Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measuring port DN 16 Safety glass pane with splinter protection Large viewing window Tray insert Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions according to the images Accessories according to the images Applications: Vacuum drying Gentle material drying Laboratory and experimental technology Research and development Quality control Material testing Industrial process technology Temperature and vacuum applications Scope of delivery: 1 × BINDER VD 56 vacuum drying oven 1 × BINDER VD-M 53 pump module / pump unit 1 × BINDER VAP 1 vacuum pump Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions Accessories according to the images Scope of delivery as shown Overall dimensions including pump module: approx. 638 × 645 × 1,542 mm (W × D × H) Total weight including pump module and vacuum pump: approx. 130 kg Condition: Used Year of manufacture 2023 Optical condition according to the images Nameplates are present Scope of d

Year of construction: 2026, condition: like new (used), BINDER KBF 470 – climate chamber – 2026 – like new condition For sale: a professional BINDER KBF 470 climate chamber, manufactured in 2026. The unit is in excellent, virtually factory-new condition. Protective elements from the transport are still attached to the housing and control panel. Device specifications: * Manufacturer: BINDER GmbH, Germany * Model: KBF 470 * Year of manufacture: 2026 * Chamber capacity: approx. 470 l * Maximum temperature: 100°C * Power supply: 220–240 V / 50–60 Hz * Power: 1.40 kW * Max. working pressure of the system: 11 bar * Refrigerant: R600a * Control: modern, touch-screen BINDER controller * Condition: like new / virtually unused Dsdpfx Adoz Dufdorocn The KBF 470 model is designed for precise research under controlled temperature and humidity conditions. It is suitable for use in laboratories, quality control, the pharmaceutical, cosmetic, and food industries, as well as for product stability tests. The greatest advantage of the offered unit is its year of manufacture (2026) and condition, which is close to that of a brand-new device.

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser • Flue gas and ash collection equipment • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Steam accumulator: BYWORTH M847, 2018 Dsdpez Ik Aaefx Adrscn The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Full technical information, photographs and further documentation available on request.

Condition: good (used), FKS PrintBind KB 2000 Book Binder Dedpjzt H Npjfx Adrjcn This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: like new (used), Year of construction: 2025, Device from 2025, like new. Two-year warranty on spare parts. The Binder KB 240 E6 is a professional refrigerated laboratory incubator with a compressor unit, designed for microorganism cultivation, stability studies, material testing, and sample storage at controlled temperatures. The E6 model, using R-134a refrigerant, is one of the most highly regarded generations in the KB series thanks to its excellent cooling performance and wide temperature range. Key features: Djdpfx Aey R Tz Ajdrocn * Temperature range: -10°C to +100°C * Chamber volume: approximately 247 liters * Compressor-based cooling * BINDER E6 controller with time programming * APT.line™ technology ensuring uniform temperature distribution * Inner doors made of tempered glass * Stainless steel chamber * 30 mm access port * RS422 interface / compatible with APT-COM™ Applications: * Incubation of microorganisms * Biological and pharmaceutical research * Stability testing * Sample storage * Material testing * Temperature simulation Technical specifications: * Capacity: approx. 247 L * Maximum temperature: 100°C * Power supply: 200–230 V * Power rating: approx. 1.2 kW Benefits of the KB E6 series: * Excellent temperature stability * Effective cooling below ambient temperature * High reliability * More energy-efficient than previous generations * Suitable for continuous operation in laboratories * Popular model for pharmaceutical and microbiological labs

Condition: as good as new (ex-display), Year of construction: 2025, Binder VDL 115 (2025) laboratory vacuum chamber, in perfect condition, demonstration unit Model: Binder VDL 115 Year of manufacture: 2025 Condition: like new – demonstration unit, after factory tests Capacity: 115 liters Power supply: 230 V Availability: in stock VAT invoice: yes Location: Grabina 92-701 Poland Optional: transport --- BINDER VDL 115 – laboratory vacuum dryer for flammable solvents BINDER VDL 115 is an advanced laboratory vacuum dryer designed for the safe drying of materials containing flammable organic solvents. Thanks to its design compliant with the ATEX 2014/34/EU directive, the device ensures the highest level of safety and precision during laboratory and industrial processes. The VDL 115 model offers fast and gentle drying with optimal heat transfer through aluminum heating shelves. An intuitive controller with a touchscreen enables convenient monitoring of temperature and pressure, and an automatic drying program ensures controlled process execution and automatic venting of the chamber after completion. Key features: * Chamber capacity: 119 l * Temperature range: from +9°C above ambient temperature to +110°C * ATEX explosion-proof certification EX II 2/3/- G IIB T3 Gb/Gc/- X * Intuitive controller with a color touchscreen Dcedpsvq I Tnsfx Adren * Graphical display of temperature and pressure * Built-in data logger with USB export * Software monitoring of the drying process with automatic chamber venting * 2 aluminum heating shelves (expandable to 6) * Connection for inert gas or air * DN16 port for mounting sensors and measuring cables * Large viewing window with safety glass * Ethernet interface for communication with a computer Technical data: * Capacity: 119 l * Maximum temperature: 110°C * Maximum shelf load: 20 kg * Maximum total load: 70 kg * Rated power: 1.6 kW * External dimensions (W × H × D): 743 × 942 × 581 mm * Weight: 158 kg Applications: * chemical and pharmaceutical laboratories, * electronics industry, * research and development (R&D) laboratories, * quality control, * drying of samples containing organic solvents, * processes requiring safe operation under vacuum conditions. BINDER VDL 115 is a professional, premium-class vacuum dryer, combining high performance, precise control, and compliance with ATEX safety requirements, making it ideal for the most demanding laboratory and industrial applications.

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Dedjy A Ewtspfx Adrjcn Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: like new (used), BINDER FED 115 – laboratory dryer / heating chamber – like new condition For sale, a professional BINDER FED 115 laboratory dryer from the renowned German manufacturer, BINDER. The unit is in excellent condition, practically like new. It has not been used. The interior and exterior are very well preserved and show no signs of use. Technical specifications: * Manufacturer: BINDER * Model: FED 115 E2 * Chamber volume: approx. 115 liters * Maximum / nominal temperature: 300°C * Power supply: 230 V, 1N~ Djdpfxsz Da Uqe Adrecn * Power: 1.60 kW * Rated current: 7.0 A * Frequency: 50/60 Hz * Temperature protection class: 2.0 * Made in Germany The FED model is designed for precise drying, heating, and thermal treatment of samples in laboratories, industry, and quality control. Condition: like new / unused. 8 units available.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: Dcodpeziznfofx Adron - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828D, total height: 2,300 mm, total width: 1,800 mm, table width: 750 mm, table length: 360 mm, table load: 300 kg, overall weight: 4,200 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, product length (max.): 2,300 mm, number of axes: 3, This 3-axis KNUTH X-Mill 640 was manufactured in 2015. It features a travel of 640 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a Siemens 828D control unit and a 16-fold double-arm tool changer. If you are looking to get high-quality machining capabilities, consider the KNUTH X-Mill 640 vertical machining centre we have for sale. Contact us for further details. Dcodpszrnvuefx Adrjn - Table Height from Floor: 850 mm- T-Slots (Number / Width / Distance): 3 / 18 mm / 100 mm- Spindle Speed: 60 - 8000 rpm- Distance Spindle to Vertical Guide Way: 430 mm- Main Motor Power: 7.5 / 11 kW- Total Power: 10.00 kW- Feed Rate: 5 - 5000 mm/min- Rapid Feed Rate: 15000 mm/min- Positioning Accuracy: 0.01 mm- Repeatability: 0.005 mm- Machine Weight: 2500 kg (Manual lifting specification) / 4200 kg- Operating Voltage: 400 V / 440 V, 3-Phase, 50/60 Hz- Operating Temperature: 0°C ~ 45°C- Pneumatic Operating Pressure: >= 0.6 MPa (6 kg/cm²)- Operating Setup Time: 186,488- Tool Changer: 16-fold double-arm tool changer- Standard & Included Accessories: Siemens 828D control, electronic handwheel, spiral chip conveyor, servo drives for all 3 axes, 16-position tool changer, pneumatic tool clamping, air conditioning, fully enclosed work area, work light, Ethernet, USB interface, sloping chip tray, automatic central lubrication, spindle oil cooling, operating tools, operating instructions, X.div CNC rotary table 170 mm with manual tailstock for Siemens control, 6" manual chuck for X.div, BT40/B16 and BT40/B18 drill chuck mounts, MAS BT40-ER40-80 collet chuck, 15-piece ER40 collet set (3-26 mm), BT40 combination mandrels (Ø22, Ø27, Ø32 mm), WELDON BT40 milling chucks (Ø6, Ø8, Ø10, Ø12, Ø16, Ø20 mm) Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the upgraded safety and performance test package “P Plus.” This is not a standard laboratory incubator, but rather a high-end safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. The device is fully functional and has been tested. It originally sustained a transport-related housing damage, which has been professionally repaired and repainted. Technically flawless – visually in very good condition 100% operational – no limitations Price advantage: €1,000 cheaper than comparable units Special Value Added: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Item 2 – Performance & Application) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at temperature) - Long-term temperature runs and thermal cycling tests - Testing of unpowered and cyclical powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / E-mobility / Energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical and acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection inside chamber - Exhaust port with reversible overpressure valve - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual trigger of suppression system - Cable feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. This is not an abuse or destruction testing device, but a compliant, safe test chamber for real-world operational and fault scenarios. Technical Key Data: Temperature range: –10 °C to +100 °C Internal volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. overall load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50 / 60 Hz Phase: single-phase Power consumption: approx. 2.1 kW Fusing: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special: - Genuine battery safety test cabinet - EUCAR hazard level 5 capable - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors reserved!) Further questions? Please feel free to contact us by phone. Dcjdpfx Aoyyw E Rodrsn

Condition: excellent (used), Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) Dedpfx Adoznbm Eorocn - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.

Condition: like new (used), Device as new ex demo. Dcjdpfxjwfh T As Adren Description The Binder CO2 incubator type CB210 is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used, among others, in tissue bioengineering, in vitro fertilization (IVF) clinics and teaching hospitals. The Binder CB210 also contains six compartments. The amount of CO2 is measured using a built-in infrared sensor. The outer door is made of stainless steel. In addition, this CO2 incubator is equipped with six shelves and forced convection. Technical data Voltage: 230 V, 50/60 Hz Current: 6.6 A Power: 1.5 kW CO2 control range: 0 – 20% Temperature range: approx. 7 °C above ambient temperature up to 60 °C External dimensions (W) x (D) x (H): 74 x 79 x 106 cm Internal dimensions (W) x (D) x (H): 58 x 44 x 75 cm

Condition: used, Binder Model: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven, designed for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specially designed for applications involving flammable solvents and meets high safety requirements (ATEX compliant). With precise temperature and pressure control, this device is ideally suited for reproducible laboratory and industrial processes. Typical Areas of Application: - Chemical and pharmaceutical laboratories - Research & development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9 °C above ambient up to approx. +110 °C - Ultimate vacuum: down to approx. 0.01 mbar - Electronic temperature and pressure control Features: - Safety glass window with shatter protection - ATEX-compliant design - Multiple shelf levels (number depending on configuration) Djdpfx Adoziyymerjcn - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current consumption: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200 °C - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications subject to changes and errors!) Should you have any further questions, we would be happy to answer them by phone.

Condition: used, Year of construction: 1992, Lippert rising falling Incline belt conveyor GF 640+7300+850-750-600 RA2264 Technical data: Conveyor length (NL): 8790 mm ( 850 mm forerun + 7300 mm ascending belt + 640 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Dsdpfjrtalrsx Adrjcn Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), KUKA rotor with binder 86 61104H23 brake for 1FK7034-5AZ91-1ZZ9-Z S09 motor, the screw in the thread of the rotor is torn off, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Dcjdpfx Adsu Tm E Noren

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Vertical Machining Center DECKEL MAHO DMC 850 V With Heidenhain TNC 640 control system Year of manufacture: 2016 Travel ranges: X 850 Y 520 Z 475 Spindle speed range: 0 – 20,000 rpm, stepless With the following accessories: Fixed angular table, clamping surface 1160 mm x 575 mm Dcsdpfxsz I Dcaj Adren Vertical tool changer with 30 magazine slots (HSK 63) 3D measuring probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate safety screens Full protective enclosure with sliding doors and interior lighting Operating modes 3 + 4 Compressed air supply for linear measuring systems Spindle oil cooler Chip conveyor Chip flushing system Chip flushing gun Coolant system (reinforced coolant pump) 4 adjustable machine feet Operating manuals

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° Dcedpfx Aegylq Iodren -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Condition: ready for operation (used), * Brand: Binder * Type: KRL/EDS * Surface: 7000 x 2400 mm – 2 decks * Screen opening upperdeck: [] 70 x 70 mm. Dcedpfx Aeywmfzodrjn * Screen upening lowerdeck: [] 8 mm flip-flop. * Driving: E-motor 30 kW

Condition: ready for operation (used), * Brand: Binder * Surface: 7000 x 1900 mm – 1 deck * Screen opening: [] 20 mm Dedpfx Ajywml Usdrjcn * Driving: 22 kW E-motor * Incl.: rubber springs.

Condition: ready for operation (used), * Brand: Binder * Model: mobile * A-A length: 9.700 mm * Beltwidth: 650 mm Dedsywmz Njpfx Adrjcn * Driving : drum motor 5,5 kW