Used Bison 4344-630-8 for sale (36,906)

Condition: new, three-jaw chuck diameter: 630 mm, STOCKLIST NEW BISON CHUCKS Chucks in Original wooden Boxes ===== 1 x 4344-630-8 1 x 4344-315-11 1 x 4334-630-8 1 x 4334-500-6 1 x 3204-160 1 x 4305-800 (JAWS) 1 x 3244-400-8 1 x 3544-400-11 3 x 4344-400-6 1 x 3704-250-6 1 x 4344-250-6 1 x 3514-250-6 1 x 3744-400-11 1 x 3704-400 1 x 3544-400-8 1 x 3245-400-8 2 x 4334-400-8 2 x 4344-400-8 1 x 3434-315-8 1 x 4344-200-6 1 x 3704-315 1 x 4344-250-8 1 x 3204-200 Dodpfjqpg Hysx Abfsuu 1 x 3234-200-5 Please always check if still available! Delivery: EXW – NL

Condition: good (used), 3 sets of used soft one-piece clamping jaws for 3-jaw spiral chuck BISON 630 Dujdswz Ikmepfx Abfeu Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, functionality: fully functional, chuck outer diameter: 630 mm, New 4-jaw chuck, made in Poland, BISON, 630 mm diameter Dedswk Ibkepfx Abfsuu

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg Dujdpoyb Sx Tofx Abfju The machine was raised by 100 mm.

Condition: good (used), Year of construction: 2008, ø 200-630 mm Duodpfx Abou N Hbrofju 7.5 kW single servo drives

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system Duedpfx Aezcaxwjbfsu electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8040-0008, Plastic Injection Moulding Machine | Demag Ergotech - Systec 280/630-840 (2800-840) Clamping Force [kN]: 2,800 Number of components: 1 Clamping platen width [mm]: 950 Clamping platen height [mm]: 950 Clear tie bar distance horizontal [mm]: 630 Clear tie bar distance vertical [mm]: 630 Centering ring diameter [mm]: 160 Dedpfxjygidwo Abfsuu Minimum mould height [mm]: 330 Maximum mould height [mm]: 710 Maximum daylight opening [mm]: 675 Maximum ejector stroke [mm]: 200 Thread [M]: 20 Maximum mould weight [kg]: 3,700 Maximum mould weight, moving platen [kg]: 2,500 Screw diameter [mm]: EE1: 45 Max. shot weight [g] PS: EE1: 320 Injection unit arrangement: EE1: horizontal Equipment: 2-core pull, 6-fold cascade, with robot Inspection possible at any time by prior arrangement. Free loaded on truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGErgotech | Ergotec | Ergotech280

Condition: used, mileage: 93,016 km, power: 132 kW (179.47 HP), first registration: 03/2007, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro4, Equipment: ABS, * Superstructure: BISON PALFINGER TKA 28 aerial work platform In 2020/2, a total of €43,237.40 was invested in repairs by Palfinger; the invoice is available and confirms the well-maintained and upgraded condition of the vehicle. UVV 2027/4 max. working height: 28 meters max. lateral reach with 120 kg load: 20 meters max. load capacity 300 kg max. number of people in the basket: 3 * Vehicle: MAN TGL 8.180 Second owner New TÜV (German vehicle inspection) 6-speed manual transmission 132 kW/180 hp Suspension: leaf spring/leaf spring Euro 4 7490 kg gross vehicle weight Special equipment: Djdpfx Abjy Uctijfjuu Wide-angle exterior mirror, left, battery 140 Ah, operating hour counter, aluminum compressed air tank, cab: with 3 rear windows, flame starter system, fuel tank: 100 liters, lowered, right, raised air intake, dry air filter right at the bottom, auxiliary drive N 36 / 5 C, radio preparation 12 V, stabilization package for high center of gravity, control module for external data exchange, preparation for engine start/stop system at the end of the frame Additional equipment: Axle configuration: 4x2, wide-angle exterior mirror, right, on-board computer MAN-Tronic, curb mirror right, compressed air connection front, electronic braking system MAN-Brakematic, EURO 4 engine, cab: C (Compact), suspension: leaf spring / leaf spring, generator 28 V 80 A, transmission 6-speed - type: ZF S6 - 850, rear axle HY-0718, body/superstructure: tipper, fuel filter heated, radiator protection, adjustable steering column (steering wheel), engine 4.6 L - 132 kW diesel (D 0834), engine brake, wheelbase 3050 mm, spare wheel jack on the side, disc brake rear axle, disc brake front axle, bumper in plastic version, cross member for trailer coupling, underrun protection rear, underrun protection front, viscous fan, front axle VOK-05 curved, permissible gross weight 8.00 t

Condition: used, mileage: 93,016 km, power: 132 kW (179.47 HP), first registration: 03/2007, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro4, number of seats: 2, total length: 700 mm, total width: 253 mm, total height: 335 mm, Equipment: ABS, * Superstructure: BISON PALFINGER TKA 28 aerial work platform In 2020/2, a total of €43,237.40 was invested in repairs by Palfinger; the invoice is available and confirms the well-maintained and upgraded condition of the vehicle. UVV 2027/4 max. working height: 28 meters max. lateral reach with a 120 kg basket load: 20 meters max. basket load: 300 kg max. number of people in the basket: 3 * Vehicle: MAN TGL 8.180 Duodpfx Asy Ucq Isbfou 2nd owner New TÜV (technical inspection) 6-speed manual transmission 132 kW / 180 hp Suspension: leaf spring / leaf spring Euro 4 7490 kg gross vehicle weight Special equipment: Exterior mirror, wide-angle, left, battery 140 Ah, operating hour counter, compressed air tank, aluminum, cab: with 3 rear window panes, flame starter system, fuel tank: 100 liters, lowered, right, air intake raised, dry air filter, right lower side, auxiliary drive N 36 / 5 C, radio preparation 12V, stabilization package for high center of gravity, control module for external data exchange, preparation for engine start/stop system at the end of the frame Additional equipment: Axle configuration: 4x2, exterior mirror, wide-angle, right, on-board computer MAN-Tronic, curb mirror, right, compressed air connection front, electronic braking system MAN-Brakematic, EURO 4 engine, cab: C (Compact), suspension: leaf spring / leaf spring, generator 28 V 80 A, transmission 6-speed - type: ZF S6 - 850, rear axle HY-0718, body / superstructure: tipper, fuel filter heated, radiator protection, steering column (steering wheel) adjustable, engine 4.6 L - 132 kW diesel (D 0834), engine brake, wheelbase 3050 mm, spare wheel jack, side, disc brake rear axle, disc brake front axle, bumper in plastic design, crossmember for trailer coupling, underrun protection rear, underrun protection front, viscous fan, front axle VOK-05, permissible gross weight 8.00 t

Condition: used, Technical details: weight of the machine approx.: 5000 kg Dodpfxou Nlhkj Abfouu transport dimensions LxWxH: 1,4 x 1,8 x 2,2 m VERTICAL MULTIFUNCTIONAL HEADSTOCK UNIT FOR VLC 800 MT TURNING MILLING (see last photo for comparison) The headstock unit of the EMAG machines of the VLC series is characterised by short strokes, high rapid traverse rates, extreme rigidity and an integrated cooling system. Maintenance-free, frequency-controlled three-phase motors serve as feed drives for the X and Z axes. Max. chuck speed = 800 rpm. Motor: MBS382F Feed drive: 500 stroke (Z-axis) Stroke limitation 500mm Hydraulic cylinder Weight compensation Spindle flange according to DIN 55 026 size Z 380 *

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.4 mm -Inner diameter: 80 mm Duodpfx Abew Au Egofou -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Quantity: 2x saw blades included Price: per piece -Weight: 10.6 kg

Condition: new, Year of construction: 2026, machine/vehicle number: 19856, fuel type: diesel, motor manufacturer: Hyundai DP180LA, General information Field of application: Construction Dedpfx Asyhlfyebfsuu Weights Empty weight: 5.500 kg Functional Generator capacity: 630 kVA Dimensions of cargo space: 435 x 180 x 235 cm Other information Fuel consumption: 123 Liter per Hour at Prime Power ( 90% ) Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 900 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options at additional cost – see below Included: + Profile rotor for increased throughput performance We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 15 pieces, reversible multiple times Optional double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Dodpfx Aeb Ny Eyobfouu Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Automatic stop when rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-boosting incremental control of the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant Optional extras for the shredder (at additional cost): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm) - Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm) - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination) - Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net Raw material requirements: - Moisture content (dry basis) must be below 30% - Installation temperature: temperature controlled room, at least +5°C - Metals and mineral contaminants such as sand, stones, etc., will increase wear

Condition: excellent (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 710 mm, total height: 80 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 710 mm, construction height: 80 mm, TAF article number: 1000003814 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,970 x 710 x 80 mm (LxWxH) Cheek width: 710 mm Cheek height: 70 mm Conveyor length: 2,970 mm Conveyor width: 630 mm Roller type: Plastic Rollers per axle: 1 piece Roller pitch: 90 mm Dsdpfx Abspvkvuefjuu Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, 2 doors, solid construction -Width: 800 mm Djdpfxoy R Nmzo Abfsuu -Depth: 630 mm -Height: 1790 mm -Shelves: See photos for layout/height -Weight: 100 kg

Condition: used, Year of construction: 2007, color: yellow, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). MAN TGL 8.150 4x2 Aerial Work Platform Body: Bison Palfinger TKA 30, Working height: 30 m, Platform length: 1.62 m, Platform width: 0.82 m, Outreach: 18.4 m, Capacity: 3 persons, Payload: 280 kg, Number of seats: 2, Manual transmission, Engine brake, ABS/ESP/ASR, PTO (power take-off), Halogen headlights, Warning beacons, Hydraulic system, Tyre tread depth: Axle 1: 11 mm, Axle 2: 12-13 mm On request, we are happy to provide you with a leasing or financing offer. Mr. Seidel (by phone) is at your service. Duedpfx Aoyxkpyjbfeu Further information can be found on our website. ... Subject to errors, changes, and prior sale! Power steering, ABS, ESP, Crane = Additional information = Mileage: 118,885 km Unladen weight: 7,490 kg Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Operating voltage: 400 V (3 ~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Dodpfx Aeyx Daxjbfouu Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Year of construction: 2008, operating hours: 133 h, condition: used, JBM - Wood Chipper Type 630 MDX on Single-Axle Chassis / Car Trailer > Kubota diesel engine 44 kW (60 HP) Duedpfeyxkncjx Abfsu > Sprung, braked single-axle chassis > Wide feed: 310 x 220 mm > Max. log diameter: up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight approx. 1,690 kg > Only 133 hours! > Year of manufacture: 2008 On request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted. = Further Information = Please contact Tobias Ebert for more details.

Condition: good (used), Year of construction: 2012, operating hours: 43,331 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, warehouse no.: 503604 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: Selogica year of construction: 2012 operation hours: 43331 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 1300 mm opening stroke: 600 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2470 bar equipment included screen text german core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing Dujdjyvzyqjpfx Abfju Anti vibration mounts measures of machine l x w x h: 6.12m x 2.25m x 2.21m total weight: 12200KG technical data robot-system handling type: Linearroboter manufacture: Arburg controller: Multilift year of construction: 2012 X axis: 400 mm Z axis: 1400 mm C axis rotation: 90 ° total weight: 450 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 392 cm³, injection pressure: 2 bar, ejector force: 225 N, ejector stroke: 90 mm, plate length: 900 mm, plate width: 900 mm, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included: screen text german CEE-socket 16A Dusdpfoyvzyksx Abfju CompactFlash interface for data storage core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface OPC Schuko-socket 10A selection unit measures of machine l x w x h: 6.4m x 1.95m x 2.21m total weight: 12140KG

Condition: good (used), machine/vehicle number: 0156, Kalmar R32822-630 from Uniktruck Dujdpfx Aoyuhfpobfeu

Condition: new, Year of construction: 2022, Shredder 630 motor: 18,5 kW; 400 V - 50 Hz - 3 ph knives: 30 pieces concave, multiple rotatable rotor diameter: 260 mm Rotor design: EcoRings Dusdoku Abijpfx Abfou Control system: PLC Siemens S7-1200 cutter opening 630 x 820 mm filling volume approx. 0,6 qbm screen perforation: 10 - 12 mm Suction nozzle Ø 160 mm

Condition: excellent (used), Year of construction: 1995, Manufacturer: ROVETTA Model: SC2-630 Year: 1995 Condition: Used Stock number: 0393 Pressing force: 630 t Number of pressing points: 2 Ram stroke: 152 mm Ram adjustment: 203 mm Table size: 1,830 x 1,220 mm Ram size: 1,830 x 1,220 mm Dusdpfxeyv I N Ss Abfju Usable front opening: 1,880 mm Strokes/min: 25-60 Main motor power: 58 kW

Condition: excellent (used), mileage: 63,297 km, first registration: 08/2006, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: red, emission class: euro3, Year of construction: 2006, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, retarder, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Low noise - Speed limiter - Air horn - Reversing camera - Sun visor - Stability control - Toolbox - Power take-off (PTO) = Further Information = Drivetrain Drive: Wheel Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Twin tyres Rear axle 2: Twin tyres Weights Unladen weight: 31,580 kg Operational Mast length: 57 m Lifting height: 5,700 cm Working height: 5,700 cm Dedpfxjxphtne Abfsuu CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request SCANIA P420 8X4 + BISON PALFINGER TKA 57 KS ACCESS PLATFORM EURO 3 L PACKAGE 420 HP DRIVETRAIN: 8X4 LEAF SUSPENSION WHEELBASE: 450 CM MANUAL TRANSMISSION RETARDER TRAILER COUPLING CAMERA AIR CONDITIONING BISON PALFINGER TKA 57 KS ACCESS PLATFORM 4X OUTRIGGER STABILISERS MAX WORKING HEIGHT: 57 METRES!! MAX OUTREACH: 41 METRES WITH MAX 350 KG LOAD IN BASKET LOWER CONTROLS BASKET CONTROLS 3-MAN BASKET + 110 KG POWER SOCKET IN BASKET COMMUNICATION SYSTEM IN BASKET HYDRAULIC OIL COOLER MULTIPLE TOOLBOXES HATZ ENGINE TYPE 1B40T-X CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm Duedoyfq Alepfx Abfeu • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)