Used Bluthardt B 6 for sale (73,677)

Condition: good (used), functionality: fully functional, Drilling capacity in ST 60: 50 mm 8 gear stages: 67 – 750 rpm Spindle motor: 2.5 / 3.3 kW 4 drilling feed rates: 0.1 / 0.2 / 0.3 / 0.40 mm/rev Overhang, approx.: 355 mm Table surface: 500 x 620 mm (measured without edge) Blsdpfx Aqjzrzl Aewsl Spindle stroke: 250 mm Taper: MK 5

Year of construction: 2013, condition: ready for operation (used), A CNC external cylindrical grinding machine Roweig requiring repair is available. Center height: 310mm, max. swing diameter: 600mm, max. grinding length: 1410mm, max. clamping length: 1500mm, max. grinding diameter: 600mm, max. workpiece weight: 500kg/120kg. Workhead speed: 500rpm, spindle taper: MT6, center point: MT5, swivel angle: -30°, tailstock cylinder compensation: +/-0.15mm, scale division: 0.001mm, max. dressing relief: 25mm, table speed: 10m/min, max. table travel: 1680mm. Wheelhead travel: 600mm, infeed speed: 10m/min. Grinding wheel dimensions X/Y/Z: 630mm/100mm/304.8mm, power: 11kW, max. speed: 50m/s, grinding spindles: 2, workpiece swivel angle: -30°/195°, spindle setting angle: -30°/15°. Machine dimensions X/Y/Z: approx. 5250mm/2450mm/2200mm, weight: approx. 7500kg, control: Siemens Sinumerik 802D sl. Spindle cooling defective. Documentation available. An on-site inspection is possible. Blodozmylqopfx Aqwel

Condition: used, Year of construction: 2006, functionality: fully functional, air demand: 4,000 m³/h, pressure: 5 bar, operating pressure: 7 bar, inner dimension width: 900 mm, workpiece weight (max.): 1,000 kg, filter area: 120 m², input voltage: 380 V, working range: 1,400 mm, tank capacity: 960 l, suction capacity: 4,000 m³/h, Equipment: cabin, documentation/manual, Automatic hook-type shot blasting system complete with monorail overhead conveyor, abrasive recovery system, bucket elevator, pneumatic shot selector, vibrating screen, dust collection filter, and control panel. Main features: Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,400 mm Maximum load weight: 1,000 kg No. 6 hook holders No. 4 Carlo Banfi X1 centrifugal turbines Turbine power: 4 x 7.5 kW Abrasive flow rate: 300 – 360 kg/min Abrasive capacity (initial charge): 960 kg Power supply: 380 V three-phase – 50 Hz Total installed power: approximately 22 kW Carlo Banfi PS-6B dust collection filter included: Air flow rate: 4,000 m³/h Filter area: 120 m² No. 6 microfibre filter cartridges 4 kW suction fan Automatic cartridge cleaning system with compressed air Required compressed air pressure: 5 – 7 bar System suitable for shot blasting and surface cleaning of castings, metal structures, mechanical components, stamped parts, and steel products. Machine complete with shot recovery and recycling system, electrical panel, and original technical documentation. Includes spare parts, including motors and parts for the blasting chamber. Bedjzdqtmepfx Aqwjll Video of the machine in operation available upon request. Another identical shot blasting machine is available.

Condition: used, Year of construction: 2013, overall weight: 5,000 kg, FANUC Series 32i-MODEL B control unit, with TOP AUTOMAZIONI XF365 linear guide. Workholding devices and tools not included. Bjdpfx Aqjzxrz Uowoll AVAILABLE: November 2026

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B robot, fully equipped with options. Bodpfx Ajzxblpeqwsll DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two renowned robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B + Trackmotion 2.9 meters, complete, like new, DTC 7 hours, 2019 Bledpfxjzxbk Ej Aqwsl DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, Year of construction: 2017, operating hours: 20 h, functionality: unexamined, machine/vehicle number: 10660, filling weight (min.): 20,000 g, filling weight (max.): 1,100,000 g, Second-hand Feige ATEX pallet filling machine for sale. type 16.1-B-00x Ex II 2G c IIB T3 The machine comes with a new Stainless steel filling valve and a new filling lance, and is equipped with Feige FST-10E weighing electronics (latest weighing electronics). Easy adjustable for different packages and easy to operate. Proven technology, Feige has sold over 5.000 filling machines. Suitable for filling weights. from 20 kg to 1,100 kg. Bljdpfezxhtaex Aqwol Suitable for canisters, drums on a pallet and IBC's . Optional installation by our own local service engineers (Benelux).

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: approx. 3765 mm Bsdpfx Aozccfyeqwjll Working area Y: approx. 1560 mm Working area Z: 170 mm 5-axis electrospindle, without drilling units Tool changer with approx. 16 positions Work table: Nesting table Software: bSolid 2 Busch MM 1322 vacuum pumps Automatic panel loading system Automatic panel unloading system with motorized transfer Protective screens Weight approx. 3700 kg. Available January 2027

Condition: used, mileage: 192,700 km, power: 100 kW (135.96 HP), first registration: 02/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Special equipment: Airbag driver/passenger side, Cargo package, Wooden floor in the cargo area, Paneling in the cargo/passenger compartment: wood, half-height, Rear wing doors (opening angle 270 degrees), Cargo area lighting LED, Edition package, Audio navigation system Navi 50 IntelliLink Pro, Parking assist system, On-board computer, Cargo area partition with noise reduction, Interior filter: pollen filter, Seats in the driver's cab: driver's seat comfort, Seats in the driver's cab: passenger double seat multifunctional, Glove compartment with pull-out tray (FlexTray), Pull-out tray and cup holder, passenger side, Tie-down points in the cargo area, side, Wheel covers, Lighting package 1, Automatic activation for headlights, Tire repair kit Blsdpfx Aqszxkutjwel Additional equipment: Exterior mirrors, electrically adjustable and heated, Single tires on 2nd axle / rear axle, Generator 185 A, Interior filter: pollen filter, Body/superstructure: box-type, large-volume, standard, Body variant: vehicle length L3, Body variant: Maxi roof (H3), Fuel tank: 80 liters, Cargo area partition closed (without window), Steering column (steering wheel) adjustable, Headlight range adjustment, Maxi roof H3, Permissible total weight 3.5 t, Model revision, Engine 2.3 L - 100 kW Biturbo CDTI, Wheelbase 4332 mm, Wheelbase medium, Low emissions according to emission standard Euro 6d-TEMP, Sliding door cargo/passenger compartment, right, Side marker lights, Visibility package, Automatic activation for headlights, Steel rims 6.5x16, Permissible total weight 3.5 t

Condition: used, Year of construction: 2005, overall weight: 7,400 kg, FANUC Series 18i-TB control system, IEMCA AUTOMATA 2.5 robot loader – year 2010. Bodpfxszxr Izo Aqwoll AVAILABLE FROM NOVEMBER 2026.

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V Blodpfx Aezn I Aasqwjl The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 2015-07, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 180 kg, Euromat 64 L, with IS 600 computer control, cascade loading system, with loading rails in the baking chamber, door hinge on the right. Year of manufacture: 2015. Accessories: - With a base frame for the use of a loading trolley - 2 loading trolleys, each with one 10-tier rack - 30 perforated plates, coated The machine was acquired in 2018 as a demonstration model from the manufacturer Wiesheu and used for baking trials. As a result, the machine is almost in new condition. Bodpfx Aqezv I E Rswsll

Condition: excellent (used), Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 -Width: 6mm -Number: 2x broach available -Price per piece -Total dimensions: 900/6/H13 mm Blodpsitt Ryjfx Aqwel -Weight: 0.5 kg/pc.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 136 h, travel distance X-axis: 610 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 828 D SL, total height: 1,987 mm, total width: 1,720 mm, table width: 350 mm, table length: 710 mm, overall weight: 2,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,000 W, tool weight: 6,000 g, product length (max.): 1,880 mm, number of axes: 3, This 3-axis PreMill V 610 B was manufactured in 2019. It features an X-axis travel of 610 mm, Y-axis travel of 350 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 710 x 350 mm and a maximum workpiece weight of 350 kg. If you are looking to get high-quality machining capabilities, consider the PreMill V 610 B vertical machining centre we have for sale. Contact us for further details. - Distance Spindle Center to Table Surface: 100 - 560 mm- Max. Workpiece Weight: 350 kg- Rapid Traverse Speed (X/Y/Z): 12 m/min- Feed Speed: 10 m/min- Positioning Accuracy: +/- 0.008 mm- Repeatability: +/- 0.005 mm- Tool Changer Type: Carousel- Tool Storage Capacity: 16 slots- Max. Tool Diameter: 100 mm (150 mm without adjacent tools)- Max. Tool Length: 300 mm- Spindle Motor Power (100% ED): 7 kW- Feed Motor Power (X/Y/Z): 2.3 kW- Power Supply: 12 kVA- Compressed Air Supply: 6 bar- Coolant Tank Capacity: 100 L- additional features available: ShopMill, 3D Simulation, Auto Power Off, Rigid Tapping, Flat Guideways in X/Y/Z, Chip Conveyor (Screw type) with Chip Cart, Spindle Ring Flushing, Prepared for CTS (IKZ), Prepared for 4th Axis, Central Oil Lubrication, LED Signal Lamp & Workspace Light, Vice Technical Specification Bedpezn Urhjfx Aqwoll Taper Size SK 40 Through-spindle Coolant No

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Bodpfswuz Ekox Aqwsll Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2012, Very well-maintained press brake with cutting device max. processing length 6 m 9 selectable automatic bending sequences max. processing thickness: sheet metal 1.25 mm, aluminum 1.5 mm Bsdpezxwuaofx Aqwjll

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Equipped with 2 flights. See PDF file for sketch. Trough inner width 600 mm. Blsdpfx Ajzn N Udsqwel Drive via geared motor with 4.0 kW.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Parallel Lathe WEILER type PRAKTIKANT 160 B Between points: 650 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 192 mm Centre height: 160 mm Spindle diameter: Ø 40 mm Rotation: from 48 to 2500 RPM Turret Multifix type A 3-jaws chuck Ø 135 mm Year of construction: 1999 Bljdozwcn Nopfx Aqwsl 2 speeds spindle motor - 3kW Threadings Metric + Whitworth Tailstock CM3 Scale 2 axes MITUTOYO Supplied with (see photos) : 1 clamps system 1 4-jaws chuck Ø 135 mm 7 MULTIFIX tool holders + various tools ariousSet of clamps Voltage: 380 V Length: 1800 mm Width: 1100 mm Total height (with light): 2100 mm Weight: approx 900 KG

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Bsdpfsrl S Ufox Aqwell Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,500 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2012. This HWACHEON CUTEX 160 B VDI features a swing over bed of 550 mm and a maximum spindle speed of 4500 rpm. It offers travels of 170 mm in the X-axis and 335 mm in the Z-axis, along with 12 tool positions. If you are looking to get high-quality turning capabilities, consider the HWACHEON CUTEX 160 B VDI machine we have for sale. Contact us for further details. • Swing over bed 550 mm • Maximum spindle speed 4500 rpm • Travels x-170 mm, z-335 mm • 12 tool positions Blodezwxz Sspfx Aqwol Technical Specification Counter Spindle No Driven Tools Yes

Condition: refurbished (used), Year of construction: 2014, overall weight: 150 kg, Fully inspected and tested, with a 6-month warranty. Bledpszvd Smofx Aqwel

Condition: like new (used), Year of construction: 2016, volume flow: 5 m³/h, overall weight: 4,900 kg, energy consumption: 35 kWh, peeling centrifuge 3000 rpm , 630 mm diameter bowl Bedpjvm Ur Aefx Aqwoll

Year of construction: 2008, condition: ready for operation (used), Max. pipe diameter: 500mm, power: 1.7kW, max. pipe thickness: 6mm, weight: approx. 4100kg. Documentation available. On-site inspection is possible. Blodju Ei Umepfx Aqwsl

Condition: ready for operation (used), Year of construction: 1982, Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible. Bjdpfxeyttw Uo Aqwjll

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Bledpfx Aqsrtrztewjl Magnetic Chip Separator Hydraulic System Chiller Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"