Used Bobst Punching Machine for sale (65,008)

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Bodpsz Dvfxefx Ahmjln Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Bljdstyqizspfx Ahmen Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. Bodezlr Syspfx Ahmsln The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, EDEL - Stanzprofi 250 / Punching machine - CE marking - Year of manufacture 1995 - Table dimensions approx. 1350x700mm - Operating pressure 6 bar - Max. force 250 KN (25 MP) Blodpsz Dq S Tsfx Ahmon Dimensions approx. 1.6 x 2 x 1.8 meters / Weight approx. 1600 kg Errors and omissions excepted.

Condition: used, Year of construction: 1977, functionality: fully functional, Bobst SPO 2000, ref. 3013 Year: 1977 Maximum sheet size: 2032 x 1270 mm Minimum sheet size: 600 x 520 mm Maximum cutting force: 550 tons Suitable for corrugated board from 1.5 mm to 9.0 mm Maximum mechanical speed: 5000 sheets per hour Stripping unit included New electrical cabinet Bedozfh I Repfx Ahmeln New main motor with inverter Pre-feeder The machine is powered and can be tested Condition: Good!

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine sustained transport damage. The machine is currently disassembled. Components can be inspected. The machine will be completely mechanically and electrically overhauled/repaired before delivery in 2026/2027. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Stroke rate: 30 - 180/min Center height: 410 mm Bjdpow H Arvsfx Ahmoln Table dimensions: 1500 x 1200 mm (The press will be delivered with a new table top; T-slot design can be freely selected) Ram size: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, PC 477E, year of manufacture 2020.

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 070027, control type: CNC control, punching force: 150 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, overall weight: 8,000 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Bledsz E R S Aspfx Ahmjn Type: 9095 — Serial number: 070027 Year of manufacture: 1994 Max. punching force: 150 kN Machine weight: 8,000 kg Power supply: 380V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling and cassettes. For reference, standard specifications of this model: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any questions or send further photos/videos of the machine in operation.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 070691, control type: CNC control, actuation type: mechanical, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, table length: 2,070 mm, table width: 1,280 mm, overall weight: 8,000 kg, power: 14 kW (19.03 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine (with Multitool) Blsdpfxoz E Sa Is Ahmjn For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1998. Well maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070691 Year of manufacture: 1998 Max. punching force: 165 kN Machine weight: 8,000 kg Power supply: 220V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling, cassettes, and Multitool. For reference, the standard specifications for this model are: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email. We will be happy to answer any questions and provide further photos or videos of the machine in operation.

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Blsdpfxoy Udrmo Ahmjn Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T If you have any further questions, please do not hesitate to ask.

Year of construction: 1986, condition: ready for operation (used), We offer this ready for use K. Widmann 0271E.20 Punched pockets machine, year of construction 1986. Control voltage: 220 V Frequency: 50 Hz Operating voltage: 380 V Serial number: 89024E011 Circuit diagram number: A Bledpez Akq Njfx Ahmon If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 040808, punching force: 220 t, sheet thickness copper (max.): 8 mm, overall weight: 11,050 kg, table width: 1,250 mm, table length: 2,500 mm, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, TC500 R Punching Center with Sheetmaster Medium format 2500mm x 1250mm A large tool arsenal is also available for separate sale. Additionally, there is a Quick Sharp and Multiset available. The set can also be purchased together with the machine and the basic tool kit. Price to be negotiated. Bodpfxex Th R Dj Ahmjln We are looking to sell our used Trumpf TC 500R punching center. The reason is that the machine has hardly been in use for years, and we need the space. This is a complete punching center with Sheetmaster and scrap disposal system. We took over the machine in 2008. Under our ownership, the punching unit has run a maximum of two shifts per week. Since 2015, it has operated roughly once a month, as the corresponding products were discontinued. The machine is offered with a standard tooling set and is fully functional. Additional tools and a Trumpf QuickSharp are available separately.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Blsdpfjzxzagsx Ahmon Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: excellent (used), functionality: fully functional, overall weight: 400 kg, We sell directly. Make-Ready Table for Bobst 106 E/ER We offer a professional table for the pre-preparation and alignment of die-cutting tools, as well as a cleaning section located outside the die-cutting machine. This device reduces the machine setup time (make-ready) of the Bobst machine by up to 30-40%. Technical data and specifications: Compatibility: BOBST 106 E /ER (SP / Novacut / Visioncut / SPeria series) Working format: Max. sheet format 1060 x 760 mm. Basing system: Fully compatible with the Centerline II system (fast and precise tool centering) Construction: Stable, steel frame with an ergonomic work surface and shelves for accessories/frames Included equipment: Basing strips and millimeter scales Clamping system Bjdpfxezuwazj Ahmsln Additional elements - additional frames (without the tools visible in the pictures, i.e., pins and telescopes) Technical condition: Condition: Excellent, 100% technically sound, locking mechanisms operate smoothly. Location of the device: Dąbrówka / Poznań, Poland Logistics and delivery Delivery terms: EXW (self-collection by the Buyer) / Possibility of arranging transport at the Buyer's expense. Availability: Immediate (the table is secured and ready for loading).

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Hardened die-cutting plate and device plate. This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg The die-cutting section is transported separately from the Spiess insert and must be assembled. The electrical switch cabinet is fully plugged in with the components. Bedpev Nwwasfx Ahmsln

Year of construction: 2008, condition: ready for operation (used), We are offering this ready-to-use Roll-o-Matic roller die-cutting machine, roller size 0.932/3000, manufactured in 2008. Usable roller width: 3000 mm. The upper roller has a diameter of 320 mm and is equipped with a PA or cast nylon cutting sleeve. The roller gap can be adjusted independently on both sides and is equipped with an absolute value display for the roller gap. Operating modes: setup operation; semi-automatic operation; fully automatic operation with a light barrier and time control. Includes 5 conveyor belts, a counter, and additional equipment: support rollers for the lower roller to reduce deflection under high load. Chain drive and more powerful motor. Includes control buttons on both sides. If you have any questions or require more information, please send us a message or call us. Blsdpfjz Ag Ukex Ahmjn

Condition: good (used), Year of construction: 2005, functionality: fully functional, power: 3.73 kW (5.07 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 35 t, operating speed: 5 mm/s, table width: 510 mm, table length: 1,000 mm, total length: 1,690 mm, total width: 1,490 mm, total height: 1,870 mm, overall weight: 1,750 kg, Hydraulic punching machine with 5 stops and Trumpf-type tooling. Bjdpfezt Ih Hex Ahmsln

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Bsdpjzr Ha Esfx Ahmsln

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, overall weight: 650 kg, pressing force: 20 t, | Technical Data | Value | | Drive | Hydraulic | Bodpfx Ajz Ihn Tehmeln | Motor Power | 5.5 kW | | Maximum Punching Force | 200 kN (approx. 20 tons) | | Maximum Punching Stroke | 80 mm | | Stroke Adjustment | Adjustable via scale | | Stroke Rate | Up to 20 double strokes/min | | Operation | Foot pedal |

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Bljdpozkmi Defx Ahmsn Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,000 kg, input voltage: 400 V, SENTE Makina TFWSI-1600 HVAC machine, designed for the production of large-diameter ventilation ducts. Model: TFWSI-1600 Pipe diameter range: Ø100 – 1600 mm Material: galvanized steel, aluminum, other sheet metal Material thickness: approx. 0.4 – 1.0 mm (depending on the configuration) Production speed: up to approx. 50 m/min Bsdpsz D Ippefx Ahmsln Cutting: pneumatic rotary knife Control: PLC with touchscreen panel Power supply: 3-phase Year 2023, as new condition.

Condition: good (used), Year of construction: 2007, operating hours: 52,506 h, functionality: fully functional, punching force: 180 t, sheet thickness (max.): 6 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,660 mm, punching diameter: 76 mm, workpiece weight (max.): 230 kg, overall weight: 16,000 kg, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, space requirement width: 6,800 mm, space requirement length: 7,600 mm, space requirement height: 2,500 mm, Equipment: safety light barrier, Special equipment: + MultiShear function + MultiTool function + Brush tables Standard equipment: - Safety light barriers - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Small parts chute 500x500 mm - Punching slug extraction Bedpfxsz En Ius Ahmeln - Tool spray lubrication - Automatic tool change - Programmable punching tool lubrication with 2 containers - Programmable stripper - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphics programming - Online diagnostics via modem - Operating manuals.

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, punching slug extraction, ball bearings in the machine table Blodsz Dv Tvopfx Ahmen Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Bledpfx Ahezu Ryhsmen Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety Bedpfeyxpawex Ahmeln - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: used, Year of construction: 2000, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,200 kg, Equipment: safety light barrier, We offer this used TRUMPF Trumatic 2000 R punch machine, year of construction 2000. Maximum punching capacity: 180 kN Type: 9110 Serial number: 700359 Blsdoz Ak Diopfx Ahmon Year of manufacture: 2000 Mains supply voltage: 400 V Mains supply frequency: 50 Hz Connected load: 17 kVA Distribution voltage: 400 V Control voltage: 24 V DC Fuse rating: 3 x 35 A Air pressure: 7-14 bar Machine weight: 9200 kg If you have any questions or need more information, feel free to send us a message or give us a call.