Used Breda R 55-1250 for sale (71,754)

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Fpjdjv Rpf Sjpfx Ad Nsg Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm Fpjdpfxjy Ed I As Ad Nsg - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, throat depth: 2,005 mm, drilling capacity: 55 mm, column diameter: 360 mm, spindle speed (max.): 1,200 rpm, stroke length: 855 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 55 mm Boring capacity: 80 mm Thread cutting: approx. M40 Arm reach min.: 320 mm Arm reach max.: 2,005 mm Column diameter: 360 mm Boom travel: 855 mm Clamping surface: 1,000 mm - 1,700 mm Automatic feeds: 0.06 - 1.00 mm/rev Spindle speed: 30 - 1,200 rpm Spindle taper: MT 5 Drive power – spindle motor: 400 V / 5.5 kW Quill stroke: 240 mm Spindle to base plate: 1,000 mm - 1,700 mm Fpodpfsxn Nbdox Ad Njg MACHINE DETAILS Dimensions & Weight Dimensions: 2.99 m x 1.12 m x 2.85 m Machine weight approx.: 4,800 kg EQUIPMENT Electric central clamping Box table Hydraulic vice Coolant device

Condition: reconditioned (used), Modernized machine with new LTG control system StoreControl L. Control system expansion available as an option. Currently 5 (formerly 6) identical machines available. External Dimensions: Total height: 5,900 mm Width: 1,580 mm Depth: 2,680 mm 30 carriers, each with a load capacity of 250 kg, in usable clear dimensions: Width = 1,250 mm Depth = 825 mm Height: 0 to 750 mm Total load capacity up to 20,000 kg Operation opening starts at 860 mm above finished floor level, with a height of 1,000 mm Color scheme: grey / dark grey, carriers are sendzimir-galvanized Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive: 1 x x.0 kW / 400 Volt Horizontal drive: 1 x 0.xx kW / 400 Volt Additional features: Manually operated lifting door Fsdpfx Adog Dckue Nepg Subject to errors, technical modifications, and deviations in details/photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Currently, two identical machines are still available. Mechanically redesigned machine with new LTG StoreControl L control system. External dimensions: Height 5,200 mm (adjustment possible for an additional charge) Width 1,600 mm Depth 2,800 mm 38 beams, each with a payload of 250 kg with clear usable dimensions: W = 1,300 mm D = 825 mm H from 55 to 750 mm Total machine load capacity up to 2 x 10,000 kg Start of the access opening at 875 mm above the top floor, then 875 mm high Fedpfx Aod Hxpved Nepg Color: GRAY/BLUE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur. Performance data: Vertical drive 1 x 3.5 kW / 400 Volt Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently primarily in Germany, Austria, and several neighboring countries.

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm Fpsdpfx Adjvuk E Ue Njg material width 550 mm material thickness 0 - 6,0 mm material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90)

Condition: used, functionality: fully functional, power: 150 kW (203.94 HP), empty load weight: 36,000 kg, Year of construction: 2007, operating hours: 10,000 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Liebherr R934 C HDS Crawler Excavator Year of manufacture: 2007 10,000 operating hours Approx. 36,000 kg 150 kW Liebherr engine, 4 cylinders OQ 70/55 SW fully hydraulic quick coupler All hydraulic lines installed Extended monoblock boom Air conditioning Central lubrication system Fpjdpjxq A Dkofx Ad Neg 140 cm digging bucket

Condition: used, first registration: 11/2015, color: other, Year of construction: 2015, TRAILERTIRES 385/55 R 22.5 ALU RIM 5/7/8/MM Fedpoxwc Ebefx Ad Nopg

Condition: used, first registration: 11/2010, color: other, Year of construction: 2010, GOODYEAR TIRES IN GOOD CONDITION FOR MEGA OR LOWLOADER. Fsdpfx Adsxvx Ipe Nspg

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, throat depth: 2,000 mm, empty load weight: 5,500 kg, drilling capacity: 70 mm, spindle speed (max.): 1,250 rpm, spindle stroke: 330 mm, TECHNICAL DETAILS Drilling capacity in steel: 50 mm Drilling capacity in cast iron GG 20: 70 mm Arm reach: 2,000 mm Morse taper: MK 5 Spindle speed: 28 – 1,250 rpm Spindle stroke: 330 mm MACHINE DETAILS Control: conventional Total power requirement: 8 kW Fpsdjxxrakjpfx Ad Njg Machine weight: approx. 5,500 kg

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: Fpodpfov Hzqxjx Ad Nog - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Fpsdpfx Ajvbcl Hed Nog

Condition: used, Year of construction: 1980, functionality: fully functional, runs perfectly Fpedpfx Aey D Rnged Neg

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 3 drillings clear width: approx. 2.700 mm 3 holes per agraffe hole spacing: approx. 100 mm diameter of holes: approx. 11 mm 01x Set screw material consisting of: 06x screws M10 Fpodpfx Ajibzftsd Nog 06x nuts 06x washers

Condition: good (used), The scope of delivery includes: Fpsdpfjibzgxox Ad Nog 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 5 drillings clear width: approx. 2.700 mm Per agraffe: 5 drillings hole spacing: approx. 50 mm diameter holes: approx. 11 mm 01x Set screw material consisting of: 10x screws M10 10x nuts 10x washers

Condition: new, Year of construction: 2024, WRAVOR Horizontal bandsaws WRC 1050,1150,1225,1250,1550,2000 edgers, multirip saws, mechanization etc. Fodpfxstpwgxo Ad Njpg We are your contact for the company Wravor in Germany. We are happy to offer you the right machines.

Condition: new, B&R X67DC1198 digital counter module Rev. L0 6S5520174498, unused in original packaging, 100% functional, delivery as per photos Fpodpfxjx Eqvae Ad Nog

Condition: used, throat depth: 1,600 mm, Radial Drilling Machine BREDA R50 Fsdpfx Ajxv A H Aed Njpg Arm reach: 1600 mm Drilling capacity in steel: diameter 50 mm Automatic feed: 0.06 - 1.0 mm/rev Spindle speed: 30 - 1200 rpm

Condition: used, operating hours: 32,574 h, Ingersoll Rand SSR MH-55 Rotary Screw Air Compressor – Used Industrial Compressor Description: Ingersoll Rand SSR MH-55 industrial rotary screw air compressor, suitable for workshop, manufacturing, fabrication or general factory compressed-air supply. This is a heavy-duty industrial compressor with integrated control panel, air pressure and temperature gauges, hour meter, electrical cabinet and internal compressor/motor assembly. The machine is currently in used condition and has been removed from regular service / stored on site. The hour meter show approximately 32,574 hours. Key features: Manufacturer: Ingersoll Rand Model: SSR MH-55 Type: Rotary screw air compressor Integrated control panel Air pressure gauge Temperature gauge Hour meter fitted Internal compressor and drive motor present Industrial cabinet-mounted unit Suitable for production or workshop air supply Good candidate for recommissioning, refurbishment, spares or export Condition: It is offered sold as seen. Buyer should inspect the compressor and satisfy themselves as to running condition, electrical requirements, service history, capacity, pressure rating and suitability before purchase. Important note: Professional inspection, lifting, loading, transport and recommissioning will be the buyer’s responsibility unless otherwise agreed. Electrical and pressure-system checks should be carried out before use. Ideal for: Engineering workshops Manufacturing sites Fabrication shops Spray shops Fjdpfxey Ry E Ue Ad Njpg Industrial air systems Compressor refurbishment specialists Spares or parts use Viewing recommended. Loading / removal: Buyer to arrange, unless agreed separately

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Fjdpfx Aoxt Ibyod Nopg Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  Fsdswrxqxopfx Ad Nspg 4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: good (used), turning diameter over bed slide: 1,250 mm, turning length: 8,000 mm, workpiece weight (max.): 12,500 kg, DBC Turning Length: 8000mm Swing over bed Ø: 1280mm Swing over cross slide Ø:1000mm Fpodpfowwtcmex Ad Njg Length: 12500mm Width: 2100mm Height: 1800mm Weight: 35000kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 used steam boiler ----- - mounted on frame - Manufacturer: LOOS, Gunzenhausen Type: UL-S 1250 Output: 1,000 kg/h Permissible operating pressure: 13 bar Increased test pressure: 24.7 bar Total water capacity approx.: 2,320 l Fsdpfxoxnxfle Ad Nopg Year of manufacture: 10 / 2006 CE marking: CE 0036 Equipped with Weishaupt gas/oil burner GL5/1-D/ZMD, separate control cabinet, feedwater pump, and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 1997, 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen type : U - HD 1250 heating surface approx. : 20 qm Fjdpfjt E Rwnjx Ad Njpg boiler capacity max. : 1.250 kg/h working pressure : 16 bar increased test pressure : 28,8 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 2000 equipped with Weishaupt-combined burner (oil/ gas) Typ GL5/1-D, ZD, 200-945 kW, oil throughput 20-79 kg/h, 15-500 mbar, fittings for gas supply, switch cabinet, feed water pump, and the existing small and large-scale fittings. Economizer: Eco 3, 65 kw, 31 bar, 238°C, 28 ltr, 8,5 m².

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler Fsdpjwra Ewsfx Ad Njpg ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.