Used Burmek Spl 160.2 for sale (439)

Year of construction: 1996, condition: ready for operation (used), overall weight: 3,900 kg, This 3-axis BURMEK SPL 160.2 was manufactured in 1996. It features a maximum workpiece length of 13,000 mm, a maximum workpiece height of 180 mm, and a maximum workpiece width of 250 mm. With a robust machine weight of approximately 3,900 kg, it is designed for durability. If you are looking to get high-quality woodworking capabilities, consider the BURMEK SPL 160.2 machine we have for sale. Contact us for further details. • Max. workpiece length: 13,000 mm • Max. workpiece height: 180 mm • Min. workpiece height: 25 mm • Max. workpiece width: 250 mm • Min. workpiece width: 50 mm • Operating temperature: 5–45 °C • Required floor: concrete floor 100 mm • Relative humidity: 10–80% (no condensation) • Operating voltage: 3x380 VAC • Frequency: 50 Hz • Electrical connection value: 3x35 A • Pneumatic connection: 6 bar (3/4") • Air consumption: 1,000 l/min Podpfoy Ed Tfex Ag Dsgk • Extraction nozzle diameter: 200 mm • Extraction air speed: 25 m/s • Extraction air capacity: 2,500 m³/h • Extraction pressure drop: 565 Pa • Noise level (operating): 79 dB(A) • Noise level (idle): 72 dB(A)

Condition: like new (used), power: 46 kW (62.54 HP), rotational speed (max.): 18,000 rpm, SPL Motor Spindle HSK-A63 46 kW 18000 rpm Manufacturer: SPL Spindel und Präzisionslager GmbH Type: Motor spindle Tool holder: HSK-A63 Power: 46 kW Rated speed: at 9880 rpm Maximum speed: 18000 rpm Lubrication: Lifetime grease Bearings: Hybrid bearings Cooling: Water cooling Coolant flow rate: 8 l/min Maximum pressure: 7 bar Podjyr Aavopfx Ag Degk Protection class: IP65 Balancing quality: G1 Spindle head seal: Purge air Radial run-out accuracy: 2 µm Axial run-out accuracy: 2 µm Radial run-out accuracy at 250 mm distance: 12 µm Rotating parts mass moment of inertia: 0.0196 kgm² Front spindle diameter D1: 151 mm Bearing diameter D2: 174 mm Diameter LB: 164 mm Overall length L: 614 mm Material number: 90010004149

Condition: refurbished (used), Year of construction: 2008, rotational speed (max.): 18,000 rpm, WEISS / SPL Motor Spindle HSK-A63 175389A 18000 rpm Manufacturer: Weiss Spindeltechnologie GmbH / SPL Spindel und Präzisionslager GmbH Type: Motor spindle Spindle type: 175389A Tool interface: HSK-A63 SPL type: DR-WE-175-M-W-18-46 Serial number: 60201670 Year of manufacture: 2008 Maximum speed: 18000 rpm Motor: AC135/200/4 Protection rating: IP54 Cooling: Water cooling Coolant flow rate: 8 l/min Temperature sensor: KTY 84-130, PTC Diameter D1: 179.7 mm Pgjdpfxeyrz Rye Ag Djk Diameter D2: 262 mm Diameter LB: 285 mm Total length L: 1026 mm Spare part number: 90010000013

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2022, total length: 1,150 mm, total width: 800 mm, total height: 1,370 mm, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, electrical fuse: 32 A, Kemper SPL 75 Spiral Mixer Proven kneading machine for your doughs! 2 timers Spiral mixer with 2 speeds Stainless steel bowl and spiral Connection: 400 V Robust mechanics! Used machine Quality from a specialist workshop! Benefit from over 35 years of experience! Pgedpfoyhzmwjx Ag Djk Options: Maintenance contract Spare parts box for increased safety! Delivery service Training & commissioning Visit our large showroom!

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 Psdou U Hm Aspfx Ag Dogk CNC control system Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 autogenous torches for propane Oscillating conveyor table by Beuting Donaldson DFPRO12 filter unit for outdoor installation

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Exhaust table: 2 x 12 m Donaldson Torit DCE filtration unit Pjdsuv Hkgspfx Ag Djgk 16426ä

Condition: used, Year of construction: 1997, type of input current: three-phase, DELLA VEDOVE profile sander Psdpfx Ageytcv Ho Degk

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 04/2027, year of last overhaul: 2026, total length: 1,175 mm, total width: 800 mm, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, electrical fuse: 32 A, Spiral Mixer Kemper SPL 75 Pjdeyak Tgspfx Ag Dsgk Proven technology ... tried and tested many times! Manual control Flour dust cover Stainless steel bowl and spiral Very robust design Dough machine is mobile Only available from us with DGUV V3 inspection Connection: 400V, 32A-CEE plug Used machine, overhauled & SAB tested With warranty + spare parts service Visit us!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 04/2027, year of last overhaul: 2026, total length: 800 mm, total width: 500 mm, total height: 1,100 mm, input current: 16 A, input frequency: 50 Hz, empty load weight: 195 kg, overall weight: 195 kg, type of input current: three-phase, electrical fuse: 16 A, TOP Spiral Mixer Kemper SPL 15 for best kneading results! 2 speeds with 2 timer controls Mobile kneading machine DGUV V 3 tested – only from us Robust technology Connection: 400V, 16A CEE plug Refurbished used machine Dimensions approx.: 500 x 800 x 1100 mm (W x D x H) With warranty & spare parts service Pgjdpfxeyaf Tbe Ag Dsk Quality from a specialist company! Benefit from over 35 years of experience! We have many TOP spiral mixers in stock!

Condition: good (used), MicroStep SPL-PA Plasma Cutting System with Extraction and Compressor Technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Machine type: CNC plasma cutting system CNC control: iMSNC Design: gantry construction with linear guides Extraction unit: Donaldson Torit DCE Electrical connection (extraction unit): 400 Volt Motor power (extraction unit): 7.5 kW Pedpfx Agsyvd Uie Dsgk Compressed air generation: screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE certification: available Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 04/2027, total length: 1,190 mm, total width: 800 mm, total height: 1,280 mm, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, electrical fuse: 32 A, Spiral Mixer Kemper SPL 75 Spiral mixer Pedpfxoytluxj Ag Dogk Kemper model: SPL 75 Manual control 2 speeds, 2 timers Dough mixer for batches up to 120 kg Stainless steel bowl and spiral Dough machine is mobile Dimensions: 800 x 1190 x 1280/1700 mm (W x D x H) Connection: 400V, 32A CEE plug Used machine Options: Delivery service Maintenance contract Service package Spare parts box for added safety! Commissioning and user training Visit us and discover our wide selection!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 03/2027, year of last overhaul: 2026, total length: 1,320 mm, total width: 940 mm, total height: 1,370 mm, input frequency: 50 Hz, type of input current: three-phase, power: 9 kW (12.24 HP), electrical fuse: 32 A, Kemper SPL 125 Spiral Mixer Dough mixer with stainless steel bowl 2 speeds, 2 programmable timers Mobile machine Connection: 400V, 32A-CEE plug Pgodpfx Aex Htu Ijg Dek Dimensions: 940 x 1320 x 1370/1850 mm (W x D x H) Exclusive DGUV V3 safety inspection Refurbished used machine & SAB quality-tested With warranty and spare parts service Options: Maintenance contract Spare parts box Delivery service Commissioning & operator training We offer a large selection of spiral mixers!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 03/2027, year of last overhaul: 2026, total length: 800 mm, total width: 500 mm, input frequency: 50 Hz, type of input current: three-phase, power: 3 kW (4.08 HP), electrical fuse: 16 A, Kemperm SPL 15 Spiral Kneader Dough Mixer Kemper Model: SPL 15 for optimal kneading results! 2 speeds with 2 timers Mobile kneading machine DGUV V 3 certified exclusively by us Robust technology Connection: 400V, 16A-CEE plug Refurbished second-hand machine Dimensions approx.: 500 x 800 x 1100 mm (W x D x H) With warranty & spare parts service Quality from a specialized workshop! Benefit from over 35 years of experience! Options: Maintenance contract Spare parts box Service package Delivery right into your production line Pgsdpfxexvk I Ie Ag Dek Training & commissioning We have more top-of-the-line spiral kneaders in stock!

Condition: new, functionality: fully functional, We are selling 2,000 pieces from stock of Gates timing belts, type: 8M-288-11.2 SPL (new price approx. €48) at a unit price of €39.80 plus VAT. For orders of 100 pieces or more, the unit price is €35.00. Matching conveyor rollers can also be offered on request. Pgsdpfx Agoyc Ur Sj Dek

Condition: used, Vacuum with pump and 3 suction platesused, good conditionmake Schmalztype PVT-3-SPL-300x100-VE SEG 4vacuum generator ejector SEGoperating pressure 5 barload capacity approx. 90 kgadjustablewith vacuum pump pneumaticsuction plates 3 piecessize 300 mm x 100 mmswivelingspace requirement approx. 1200 mm x 600 mm x 900 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Podevwf D Ropfx Ag Degk

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. * Pgjdpfx Aeu Nfn Rjg Dok

Condition: used, The sale is due to insolvency. Pgsdpsxqpqkofx Ag Dsk The entire system was purchased in 2021 and was only in operation for approximately 3 years. Manufacturer: Randek (Sweden) Year of manufacture: 2021 1. Saw Type: SPL 728 X04 Control: Beckhoff, touchscreen Languages: See photos Mitre cuts: 0°–360° Bevel cuts: 90°–28° Max. material thickness: 250 mm Saw blade diameter: 700 mm Power: 7.5 kW 2. Infeed unit with stacking device, right Type: UV130F2X05 Length: 13 m Lifting table: 4,000 kg 3. Outfeed unit with stacking device, left Type: IH106F1X01 Length: 10.60 m Lifting table: 5,500 kg 4. Label printer Brand: ZEBRA Overall system dimensions approx.: Length 24 m x width 3 m

Condition: used, maximum load weight: 32,880 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, Equipment: ABS, Schmizt Cargobull SPL 24/L-13.62EB Plateau * Plateau trailer * Front wall 1,200 mm * 12 container locks / twist locks 1 x 40ft, 2 x 20ft and 1 x 20ft * Continuous lashing holes in the outer frame * 4 extendable warning signs with position lighting * Long beam height at the front 156mm, rear 428+28mm, Smart Generation * Premium distributor with 3 sockets 2x7-pin DIN ISO3731+DIN ISO1185+ ISO12098 * 8 additional stake pockets in the middle of the 8 t floor, for stake 70/70 * 8 pairs of additional stake pockets with stake securing in the outer frame for stake 70/70 * Strength per additional stake: up to 400 kg in 1 mtr. Height * 1 row of stanchion pockets 70x70 across the load securing approx. 2600mm in front of the bulkhead * Storage box open at the top for additional stanchions * Lashing eyes 16 pairs 4 ton tensile force per eyelet, according to EN 12640 * 28mm plate floor, max. 8000 kg forklift axle load strength test according to DIN EN 283 * Air suspension * Air control * Lift axle * Disc brakes Prior sale and errors are expressly reserved! Pjdpfx Aget Dhfms Degk Sale exclusively in accordance with our terms and conditions Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. In some cases, these are caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Year of construction: 2006 Working area: 6,000 x 2,000 mm Incl. 500 mm pipe shaft for pipe and beam processing 1 x plasma cutting system Kjellberg HiFocus 160i with automatic gas console Pgjdpfjrurrajx Ag Dok Cutting range steel up to 30mm, exchangeable head Manufacturer's data sheet: Kjellberg HiFocus 160i 2 x oxyfuel cutting torches up to 150mm Support table, extraction table 2,000 x 6,000 mm Shaft for processing pipes and profiles (without pipe cutting device) Complete gas supply with pressure reducer MMI console with 15″ touchscreen Machine control: MicroStep MSNC500® (based on Windows XP) Software: MicroStep CAM AsperWin Basic® Version 3.2 Spare parts and spare parts cabinet for plasma and oxy-fuel torches Filter system: Donaldson DFPRO 6 with existing feed pipes

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, RANDEK REVOLVING CROSS CUT SAW Pgedjvryhgepfx Ag Djk

Condition: used, Year of construction: 2014, functionality: fully functional, Used automatic bread slicer, MFG 2014; make as JAC; model: SPL 450/10; S/N: 14103887 voltage: 400V three-phase 50 Hz; Length: 60 cm; Width: 73 cm; Height: 127 cm; Weight: 180 kg; Power: 0.49 kW Pedpowyg Alefx Ag Dsgk Technical condition: This machine is complete, tested, the electronic parts checked and in exceptional condition; This automatic bread slicer easy to use; quiet operation; slice thickness 10 mm; blade oiling system; maximum bread size (length x width x height): 44 x 31 x 16 (cm); removable crumb collector; equipped with 4 wheels; the slicer has 42 steel knifes Discover the Jack SPL 450/10 bread Slicer, an indispensable tool for bakery professionals. With its voltage of 400V three-phase, this slicer will allow you to cut your bread with ease. With its dimensions and its weight, it will adapt perfectly to your workspace. Thanks to its power of 0.49 kW, you will be able to slice your bread in record time. This bread slicer is in perfect conditions, but has not been tested. For more information on delivery or removal, please refer to the conditions on this same page. Do not miss this opportunity to acquire quality equipment for your bakery. Price: 1.500 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 1980, LATHE SPL 1250x6000 Chuck diameter: 1250 mm Max turning over cross slide: 920 mm Length between centers: 6000 mm Psdpfswywgbsx Ag Dsgk Main motor: 22 kW Weight approx.: 19 t

Condition: ready for operation (used), Year of construction: 2020, Immediately available ex location: Pjdey E Nc Espfx Ag Djgk As-new PLANOLITH surface plate, DIN 876/1 Year of manufacture: 20020 With original stand Dimensions: 1500 x 1000 x 400 mm Weight: 1100 kg Price: EUR 1,250 plus VAT, ex location.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, 5 units: • Gravimetric screw dosing system • Feed hopper with pneumatic rotary flap, each with a lid • Screw conveyor from the big bag feeder with height-adjustable individual frame 1 unit: • Trough screw for merging and conveying the dosing materials into a transfer container. Pjdpet S Rduofx Ag Dogk 5 units: • Big bag feed station, with suspension beam that prevents the big bag from collapsing during emptying. • Big bag plate base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control Delivery EXW English Translation: 5 pieces: • Gravimetric screw dosing • Feed hopper with pneumatic rotary flap, each with a lid • Screw conveyor from Big Bag feeding with height-adjustable individual frame 1 piece: • Trough screw conveyor for merging and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension traverse to prevent the Big Bag from folding during emptying • Big Bag bottom plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Delivery: EXW

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Podpshx Elfefx Ag Dogk Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer