Used Casadei / Scm F 25 M Ll Fk for sale (90,664)

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm Ppsdpfx Asy Ehcdjfget EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Ppodpfedqzcxjx Afgot Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2023, Spindle tiltable: Yes -45 to 45° Height adjustment: electric Pivot adjustment: electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop indicator: mechanical counter spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg Ppsdpfogr Ufpex Afgot

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Ppodpou T Hhkofx Afgjt Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: new, Robust craftsman’s machine with a spindle moulder tiltable 45° on both sides and MK4 interchangeable spindle. Stable steel and cast iron construction. Dynamically balanced milling unit anchored to the worktable. Exceptionally robust build. Smooth operation due to precision components and high intrinsic weight. Standard features include reversible rotation (left/right) with electronic interlock when changing direction. Five speeds from 3,000 to 10,000 rpm. Speed change is operated easily and conveniently from the machine's side. Comes as standard with MK 4 interchangeable spindle system. Large grey cast iron worktable for sustained precision. Easy handling via controls and speed display on the machine's front. Large-dimensioned milling fence with fine adjustment and aluminium fence jaws included as standard. Fence adjustment via hand crank with numerical digital display of spindle height in 0.1 mm increments. Powerful industrial motors. Delivery includes: Technical Data: Dimensions and Weight: Weight (net): approx. 510 kg _____ Dust Extraction Connection: Extraction port diameter fence: 1 x 120 mm Extraction port diameter machine: 2 x 80 mm _____ Worktable: Worktable length: 2,500 mm Ppedoxnqx Rspfx Afgst Worktable width: 810 mm Table height: 923 mm _____ Setup Information: Space requirement details: dimensions take into account maximum travels or working lengths. Working area length: 3,700 mm Working area width/depth: 5,000 mm Note: Please add these working area dimensions to the space requirement to determine the recommended free installation area for the machine. _____ Equipment: Milling fence: heavy-duty professional design with aluminium fence jaws and fine adjustment, adjustable from the front via hand crank with numerical digital display. Arc milling safety guard: YES Spindle height adjustment: manual Spindle tilting adjustment: manual Control: manual height and angle adjustment of the milling unit Position of controls: on the machine body Table features: table extension left and right and pull-out workpiece support (total width 2,500 mm) _____ Electrical Data: Supply voltage: 400 V Mains frequency: 50 Hz Drive motor power: 7.0 kW _____ Milling Spindle: Spindle tilt: -45 to +45 ° Usable spindle length: 140 / 180 mm Clarification of usable spindle length: for spindle Ø 30-35 / for spindle Ø 40-50 mm Milling spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm _____ Max. milling tool diameters: Max. sinkable tool diameter: 320 x 60 mm Max. profile milling diameter: 250 mm Max. tenoning diameter: 350 mm Max. contour milling diameter: 160 mm

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: AB00017920, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, spindle diameter: 30 mm, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 810 mm, table length: 2,500 mm, overall weight: 510 kg, height adjustment type: mechanical, milling spindle length: 180 mm, spindle stroke: 90 mm, working height: 923 mm, Equipment: motor brake, - Stable steel and grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation thanks to precision components and high own weight - Standard with reversible rotation and electronic interlock when changing direction - Five speeds from 3000 to 10000 rpm - Speed adjustment is simple and convenient from the machine side - Standard with MK 4 quick-change spindle system - Large worktable made of cast iron for lasting precision - Easy handling due to control elements and speed display on the machine front Ppedpfowwkqhsx Afgst - Large dimension milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via handwheel - Numerical display of the set spindle height, precise to one-tenth - High-performance industrial motors

Condition: as good as new (ex-display), Year of construction: 2018, Spindle tiltable: Yes -45 to 45° Height adjustment: Handwheel Pivot adjustment: Handwheel Stop adjustment: manual Height display: mech. counter display Swivel angle display: mech. counter display Milling stop display: mechanical counter display spindle diameter: 30 mm spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm power input: 7 kW Motor brake: Yes, automatic Suction connection: 1 x 120mm, 2 x 80mm Machine length: 2500mm Machine width: 1250mm Weight: 510kg Pedpfsgyzzmox Afgjpt

Condition: like new (used), Year of construction: 2022, functionality: fully functional, SCM Accord FMX 25 - including swing crane lift with vacuum unit. Psdoy D Evlopfx Afgjpt Working feld: X 4 970 - Y 2 120 - Z 250 mm. 5 axis machine 12 KW router engine For more technical specification please read included document " SCM Accord FMX 25 - Final order" Very clean machine , first time installed in September 2022, comes from a trening center also never used in full production. Located in south part of Norway.

Condition: new, maximum load weight: 30,065 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 25 m³, Year of construction: 2025, Equipment: ABS, Available for purchase, rental, or lease with purchase option upon agreement! Schmitz Cargobull SKI 24 SL 7.2, approx. 25 m³ steel round body tipper with sliding tarpaulin – Also for Rent! ---- * Manufacturer: Schmitz Cargobull * Model: SKI 24 SL 7.2 – Steel round body tipper * First registration: – (NEW VEHICLE) * Colors: Body black RAL 9005, chassis Novagrau 7350, tarpaulin silver * Capacity: Internal body approx. 25 m³ (7.48m long x 2.354m wide x 1.46m high) * Gross vehicle weight: 36,000 kg * Unladen weight as per order confirmation: 5,935 kg * Payload: 30,065 kg * Axles: 3x SCB axles / 1st axle liftable / starting aid / disc brakes * Tyres: 385/65 R 22.5 on Speedline diamond ALLOY WHEELS * Suspension: Air suspension with lift/lower function * EBS * Overhanging pendulum tailgate with 2-hook locking and continuous seal plus additional catches * Floor 5 mm * Side walls 4 mm * Operator platform with access at front left * Hard-chromed hydraulic cylinder * Sliding tarpaulin with central locking * 1x roof bow * Individual mudguards with rear spray flaps Ppedowa Ht Repfx Afgot * Heavy-duty steel landing legs * Hydraulic hose holder * Paver brake with electro-pneumatic control * Folding underrun protection * Round tail lights * 2x rear LED reversing lights * LED side marker lights linked to indicators * 1x LED rear fog light * 1x towing coupling Available for purchase, rental, or lease with purchase option upon agreement! Note regarding possible errors in the advertisement: Despite careful preparation of this advertisement, occasional errors may occur in the text or specifications. We assume no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: new, empty load weight: 6,700 kg, maximum load weight: 25,300 kg, overall weight: 32,000 kg, axle configuration: 2 axles, loading space volume: 25 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, Schwarzmüller K-Series 2-Axle Tipper Trailer | Volume: approx. 25 m³ | ABS / EBS | 9t SAF axles with disc brakes | Full air suspension | Tyres: 385/65 R 22.5 | Steel round body | Front platform | Unladen weight: 6,700 kg | Roll tarp Ppjdsywywqjpfx Afgjt

Condition: new, empty load weight: 6,020 kg, maximum load weight: 27,980 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, Schwarzmüller K-Series 3-axle steel segment tipper | Volume: approx. 25 m³ | ABS / EBS | 9t SAF axles with disc brakes | Full air suspension | External tailgate | Tyres: 385/65 R 22.5 | Steel round body 7,650mm x 1,470mm | Floor made of 5mm HB 450 | Side walls made of 4mm HB 450 | Front platform | Unladen weight: 6,020 kg | Rolling tarpaulin | Subject to errors, input mistakes, and prior sale. Psdjywywkjpfx Afgopt

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Ppsdpfx Afeiidnfjgjt Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, mileage: 26,000 km, power: 206 kW (280.08 HP), first registration: 09/2001, fuel type: diesel, empty load weight: 13,000 kg, maximum load weight: 12,000 kg, overall weight: 25,000 kg, tire size: 315/60R22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: retarder, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, cabin, central locking, crane, differential lock, fog lights, low noise, power assisted steering, seat heater, Vehicle location: Bovenden, registration no. house, 1x comfort seat, seat heating, rear window, ABS (anti-lock braking system), retarder, power take-off, automatic, lifting+lowering, differential lock, fog lights, work lights, rotating beacon, air suspension, low-noise G1, last axle hydr. steered, container lock, folding U-protection, side aluminum driving protection, roof hatch, crane behind house, emergency stop, grapple control, foldable, rotator control, 2-point outrigger hydr, radio remote control, 3x hydr. extensions, red environmental badge Wheelbase: 4200 mm Body: 18 t Meiller RK 18.65 roll-off system (built 1991) for containers up to 6.5 m in length with DIN locking and hydraulic adjustable underride guard. HMF 1113 K3 (year 2000) loading crane with 3-fold hydraulic extension, grab control and radio. Transmission 5HP-590 automatic, 6-cylinder engine, K-cab! Podpovhm Thofx Afgopt Power take-off: ZF for HP automatic transmission, engine-dependent, output speed = 0.97 x engine speed, direction of rotation left (like engine), max. 700 Nm, suitable for continuous operation, installation position top right, direct pump drive, output flange 120 mm diameter (8-hole)! Load diagram: 4.3m 2300kg, 6.1m 1550kg, 7.8m 1170kg, 9.6m 930kg. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Ppedpfx Afjr A Eq Rsgjt Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment • Barcode reader • Enclosed fence Ppsdpfxsy D Nmne Afgst • Light barrier • DXF interface • Software: SCM XILOG PLUS

Condition: used, Year of construction: 2013, Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz   Ppjdpfjyq Ia Esx Afgot

Condition: excellent (used), Casadei F250M Tilting Spindle Moulder Spindle height and angle adjustable electrically from -5° to +45° 40 mm diameter spindle Long tables 240 cm with extension Ppedoyt Hpkspfx Afgst Adjustable fence with AIGNER guides 4-roller power feed 5 spindle speeds 7.5 kW motor Forward/reverse rotation Spindle lock Brake Very good condition, machine inspected and fully ready for work. Dimensions: width 263 cm, depth 140 cm, height 196 cm, weight 900 kg

Condition: like new (used), 25 linear meters Pallet Racking Nedcon Brand new, see pictures! A top-quality racking system from the major manufacturer NEDCON—subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 3.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity: 3050 kg per level Negotiable price: €3,290,-- net ex stock Offer includes: + 10 pre-assembled frames, depth 110 cm, height 3.5 m + 36 beams, length 2.7 m, 3050 kg load capacity per level + 72 safety clips + 20 concrete anchors Load capacity signs, documents, etc. are of course included. You can find additional accessories in the accessories catalogue. Frames in blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m available from stock. Bay load capacity 12 tons, higher bay loads available on request. Beams in orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods available from stock. Transport and assembly available on request. Other configurations available on request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking systems from various manufacturers in stock. (Specifications, details, and prices as well as prior sale subject to change and errors excepted! Please refer to our Terms and Conditions. All prices excl. VAT, ex stock.) Ppedpfx Afsfi U Aiogot Purchase / Sale: We are constantly looking for or offering a wide range of items from various sectors: - broom-clean business clearances - Company liquidations - Fast - flexible - efficient! We also clear out or dispose of goods for insolvency administrators. Write to us with a few details and we will get back to you promptly. To visit our website, please click on our logo!

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps)  Ppjdpjxrfcxofx Afgot

Condition: new, Year of construction: 2025, Motorized thicknessing table stroke with two speeds Numerical display for working height Grey cast iron thicknessing table The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Noise and chip protection curtain at workpiece infeed and outfeed as standard Adjustable roller contact pressure Front infeed roller with helical toothing Pull-out roller with rubber coating Powerful industrial engine Equipment details Models TERSA with Tersa planer blade shaft Planer blade change in seconds When the machine is started, the planing knives are automatically clamped by centrifugal force - self-locking The blade projection adjusts automatically without using setting gauges Work table The work table is supported on four large trapezoidal threaded spindles, which ensure maximum stability in all working conditions With electrical table adjustment as standard Ppedpfxoff Efae Afgst Due to the special lifting device, the table position is maintained even without locking Helical toothed steel feed rollers for a constant and even wood feed second, rubberized feed roller at the outlet Massive recoil protectors prevent the recoil of workpieces A 4-knife shaft ensures an optimal planing pattern Dimensions and weights Length approx. 1305 mm width/depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter thickness 150 m

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 Ppjdpfxoff Efcj Afgot The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Powerful industrial engine Highest possible user safety with simplest operation Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Manual quick adjustment of the chip removal with scale & clamping head The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Stop length 1200 mm Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Dust extraction connection Suction nozzle diameter Thickness

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Ppsdpfjt Hal Dox Afgot Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: like new (used), Year of construction: 2017, operating hours: 186 h, load capacity: 2,500 kg, lifting height: 4,350 mm, fuel type: electric, mast type: triplex, construction height: 2,170 mm, Manufacturer + model: LINDE R 25 Mast: 3F4350 ID: 25106.2245 Category: New Mast: 3F4350 Lowered height: 2170 mm Lifting height: 4350 mm Capacity: 2500 kg Year: 27 Hours: 186 hours !!!! Battery capacity: 48 v / 930 ah - manufactured 10 / 2023 Options: FULL cabin!! LINDE steering - Duo pedal!! Heated CABIN!! Wipers front & top & rear!! Cabin height = 2170 MM (+ beacon 140 MM) Complete in NEW condition!!! Ppjdpozaf A Asfx Afget

Condition: used, mileage: 394,900 km, power: 290 kW (394.29 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Special equipment: Rohr refrigerated transport box Ppodpfx Afszag Dbjgst * Refrigeration unit Carrier Easy Cold Supra 850 with temperature recorder, 2994 operating hours * Electrical connection for electric cooling * Tail lift, manufacturer BÄR, 2.5 t, 2450 mm, aluminum platform * Turn camera * Rear view camera * Traction chains on rear axle as starting aid * Chassis with full air suspension * Low-profile tires * Front axle 8.0 t * Audio system: CD radio * Exhaust pipe pointing downwards to the right * Brake connection: standard and DuoMatic * Compressed air connection in the cab * Compressed air tank, aluminum * Engine brake, reinforced * Tag axle, steered, liftable * Interface for fleet management system * Seats in the cab: driver's seat, suspension seat, comfort * Sun visor, external * Roller blind, side window, driver's door * 12V socket in the passenger footwell * Additional 24V socket in the passenger footwell * Preparation for 2nd control unit for level adjustment Additional equipment: * Emission standard EURO 6C * Axle configuration: 6x2/4 * Actros 4 * Trailer brake 2 - line, connections on the left * Trailer socket 24V / 15-pole * Exterior mirrors, electrically adjustable and heated * Differential lock, rear axle * Driver assistance system: Attention Assist (driver drowsiness detection) * Driver assistance system: Brake Assist (Active Brake-Assist) * Driver assistance system: Lane keeping assist * Cab: width 2.30 m, cab: L * Cab: steel-sprung, comfort * Cab floor with engine tunnel 320 mm * Suspension: air / air (full air suspension) * Power windows * Windshield, tinted * Gearbox 12-speed - Type: G 211-12, Power Shift * (AdBlue): 60 liters * Sliding roof, manual (steel) * Comfort sleeper cab, comfort locking system * Communication interface * Fuel tank: 630 liters, aluminum * Air compressor, 2-stage * Engine 10.7 liters - 290 kW R6 diesel (OM 470) * Engine compartment encapsulation * Waste heat recovery * Disc brakes, front and rear * Voltage converter 24V / 12V 10 A * Stabilizer, front axle * Additional stabilizer, rear axle / tag axle * Storage compartment flap, external left * Socket in the cab, 24V * Tachograph / EU digital tachograph * Preparation for CB radio * Preparation for toll collection system * Auxiliary heater (water) * In addition to the truck price, we are selling the trailer, manufacturer Rohr, registered 12/2018, type RZAK/18, at a price of 10,000,- net plus VAT. * Dimensions 7360x2450x2450 mm * Through-loading possible (opening and closing pneumatically) * Tail lift, manufacturer BÄR, 2.5t, 2350 mm, aluminum platform * Refrigeration unit Carrier Supra 850U, 290248 km mileage * Temperature recorder * Night socket * Disc brakes * Drawbar, extendable * Payload 10980 kg * Unladen weight 7020 kg * Permissible total weight 18000 kg * Subject to errors, changes and prior sale

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Psdpfx Afsvvi Scogspt