Used Cefla 2000 for sale (7,572)

Condition: used, Year of construction: 2002, machine/vehicle number: 02153/29, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm Ksdpfxoyifwpe Ai Redr - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5%

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Kdedpfx Aezumxmoi Rjr Year of production: 2018 Product number: 18014/5

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Kdjdszumvxspfx Ai Rjr Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Kjdpfxswu Ackj Ai Rsdr Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.* Kdjdpexn Nlvjfx Ai Rjr

Year of construction: 1998, condition: used, machine/vehicle number: 71257/1, with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome-plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx-d - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment Ksdpfxezgt A Ne Ai Rsdr - Location: in stock

Condition: good (used), Year of construction: 2002, functionality: fully functional, working width: 1,300 mm, was completely refurbished in 2022. Kdjdpfxjy Uacuo Ai Rsr

Condition: excellent (used), Year of construction: 2015, operating hours: 600 h, functionality: fully functional, machine/vehicle number: DB 5044Q01A, conveying length: 2,000 mm, working width: 1,300 mm, Powered roller conveyor with UV lamps for preheating, approximately 600 operating hours, in excellent condition. Kedpey Emldefx Ai Redr

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Year 2007 Working width 1400mm. Total length 2,00m Ksdpfx Asyzr Agei Rjdr Very good condition, available immediately.

Condition: excellent (used), Year of construction: 1999, I sell the 1-lamp UV-drying tunnel Cefla UV TTE 2000 Year 1999 Working width 1400mm. Total length 2,00m 1 Lamp GA 120 W Kdedsynvw Hopfx Ai Rer Very good condition, available immediately.

Condition: used, Year of construction: 2009, Painting system Kedpjzuzt Ejfx Ai Redr Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Ksdpszuzhiefx Ai Rodr Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: used, MDR 2000 Moving Die Rheometer • Closed, bic conical chamber system • Fast microprocessor for temperature control • Torque measurement via friction-free torque transducer Kdedpfozul Dbex Ai Rsr • High precision, high efficiency • Automation option for maximum productivity State-of-the-art vulcanization technology The MDR 2000 Moving Die Rheometer from Alpha Technologies has become the global standard for vulcanization technology. Two directly heated, bic conical tool halves with low mass provide fast and accurate temperature recovery. The oscillating lower tool half eliminates the need for a rotor, as in the Oscillating Disk Rheometer (ODR 2000). This results in faster temperature recovery and greater data accuracy. The resulting torque is measured by a torque transducer in the upper tool half, ensuring that friction forces from bearings and seals no longer affect the torque measurement. The torque signal is calibrated using a torsion spring rod with known values. This ensures long-term accuracy, repeatability, and reproducibility of the data. The unique closed chamber system enables above-average reproducibility and sensitivity to variations in the compound. Fast-responding temperature control is ensured by an optimized system. These properties, combined with a highly sensitive torque transducer and state-of-the-art microprocessor technology, offer the best in networking technology.

Year of construction: 2011, condition: ready for operation (used), Coating/varnishing machine manufactured in 2011. This CEFLA Smartparquet MRF-2VS/300 features a working width of 300 mm and a total installed power of 6 kW. If you are looking to get high-quality coating capabilities, consider the CEFLA Smartparquet MRF-2VS/300 machine we have for sale. Contact us for further details. Kdedpfx Ajzuhd Dei Rer • Main electronic connection: V 400 Hz 50 • Power consumption: KW 6 • Roller coating / varnishing machine • Measurements width: 300 mm working width

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Kodpfxshlp Efs Ai Rjdr

Condition: used, Year of construction: 2014, A high-performance, fully operational industrial roller coating line by CEFLA. All machines are from the 2014 and operated continuously until the end of 2024 (discontinued only due to the end of production), well-maintained, and ready for immediate integration into production. This setup is perfect for furniture factories, flooring manufacturers, and door producers seeking top-tier automation and flawless surface finishing Line Composition (15 Units Total): Fully operational: Kedpfjzu Rufex Ai Rsdr Coating & Filling Machines: 4 units - Smartcoater MF-EVO Roller Coaters 1 unit - CEFLA SP1-EVO Roller Filler/Spackling Machine UV Curing Ovens: 2 units - CEFLA UV-R M1 Curing Ovens 2 units - CEFLA UV-R M2 Curing Ovens Transporters: 2 units – CEFLA TB900 Transfer Conveyors Dimensions: 900 x 1580 x Adjustable Height 860–940. Non-operational - for spare parts/repairs: 4 units – CEFLA Smartcoater MF-EVO Roller Coaters

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity Installed electrical power for both dryers: approx. 210 kW 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Effective passage height: 80 mm Solvent-containing air discharged to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch panel VS-spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Supply air to the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Effective passage height: 80 mm Installed electrical power: 115 kW Solvent-containing air discharged to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch panel VS-spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Outlet electrical power: 1.5 kW; Supply air to the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h Ksdpfx Aisztp Tks Redr PR-frost protection for No. 1 heating register, with sensor and automatic control of the shut-off valve 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air knife outlet velocity max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Effective passage height: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch panel TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized, PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Subject to change, errors and prior sale in technical data)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Kdsdpfxjw H Aw Se Ai Ror Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: used, Year of construction: 2005, - Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine - Gun drive: Duo version - Height-adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen - Number of sprayers installed 0 - Number of paint pumps 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A - Volts, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quote for Kjdpsxnbhvofx Ai Rsdr assembly and commissioning of the system, as well as training for employees. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT Kedpfezg Epujx Ai Redr • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Kdsdpfx Aiozt H Npo Rjr Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: used, Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Kdsdpfezrywksx Ai Ror Technical data: - Pitch: ~ 650 mm - Cutting width: ~ 170 mm - Cutting height: ~ 40 mm

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm Kdjdpjzq Axzefx Ai Rsr • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: excellent (used), For sale is a Dräger Oxylog 2000 Plus transport ventilator – a professional device designed for ventilating patients during medical transport and in emergency situations. This model is valued for its reliability, ease of use, and robust construction. It supports both invasive and non-invasive ventilation (NIV) and offers VC-CMV, VC-AC, VC-SIMV, and SpnCPAP modes. Technical specifications: Manufacturer: Dräger Model: Oxylog 2000 Plus REF: 2M86737 Date of manufacture: 20.05.2016 Country of manufacture: Germany Built-in Li-Ion battery Gas supply: medical oxygen 270–600 kPa Adjustable tidal volume: 100–2000 ml Breathing frequency: 2–50/min PEEP adjustment: 0–20 mbar Maximum inspiratory flow: 100 l/min FiO₂: approximately 40% (AirMix) or 100% O₂ Device weight: approximately 5.4 kg Ksdpfezphc Aox Ai Rodr Condition: The device powers on, and the display is functioning. Visually in good condition, with normal signs of wear and tear resulting from use. The set includes a transport frame, handle, carrying strap, accessory bag, and cables as shown in the photos. The exact set depicted in the photographs is being sold. Ideal for use in emergency medical services, ambulances, patient transport, and as a backup or training device. The device is characterized by its ease of use, compact design, and high resistance to harsh working conditions in the field.

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings Kdsdpfxsx N Icxs Ai Ror • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.