Used Chipboard Package 38Mm for sale (12,986)

Condition: good (used), 30 x Particleboard panels, 38mm thick, unfinished, 269cm x 99cm, including deep supports. Price excludes VAT. The product is also available in other quantities and designs. This package includes: 30 x Particleboard panels, unfinished, 268cm x 99cm x 38mm 120 x Deep supports, 110cm each, for inserting the particleboard panels without height loss Condition: dusty 2500 pieces available Rcjdeigqp Iepfx Alaof Accessories such as: Floor fixing Connectors Load warning labels Impact protection Guardrails Grating Rear wall grating Deep supports Barrier railings and much more... Just ask us!

Condition: good (used), Chipboard panel, package, 38mm, raw, 269cm x 99cm, including deep support beams. Price excluding VAT. The product is also available in other quantities and versions. Rcsdpfx Aoigqpvolaof This package includes: 1 x Chipboard panel, raw, 268cm x 99cm x 38mm 4 x Deep support beams, 110cm each, for inserting the chipboard panel without height loss. Condition: dusty 2500 pieces available. Accessories such as: Floor fastening Connectors Load warning signs Impact protection Guard rails Grating Rear wall grating Deep support beams Barrier rails and much more... Just ask us!

Year of construction: 2014, condition: good (used), Over 2,000 m2 of chipboard, 38mm – used: Price per m2, ex works: €3.00 (net), dismantled, packaged, and loaded! Manufacturer: unknown Type: unknown Year of manufacture: 2014 Thickness: 38mm Top surface: grey mottled Bottom surface: white Dimensions: Mainly, e.g.: 2.62 x 1m Rcsdpfx Aezq Aarolasf 3.78 x 1m Plus other sizes Condition: good Available: from approximately Q4/2026 Location: Hamburg

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approx. 60,000 packs (approx. 40 operating hours) have been processed during trial operation! For sale is an absolutely like-new, high-end deep-drawing packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was acquired in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in a cleanroom, dust-free • Operating hours: Only approx. 60,000 individual packs (equivalent to approx. 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approx. 700 cm x 140 cm x 230 cm (incl. discharge belt) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: Compressor not included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format configuration: 4 lanes side by side / 1 row (pp. 13-14) • Actual internal form dimension per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimension (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (form plate type 5, directly water-cooled) (pp. 14-15) • Feed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (Included!) • Integrated printer: MULTIVAC MR293 HP/TT film direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers and best-before dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge belt: High-quality Intralox discharge belt (800 mm) with blue Intralox chain and separate frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection nozzles installed on the tool side for packaging under modified atmosphere. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control system (Windows Embedded) (pp. 9-10). Rcedpjzwgxrofx Alaof • Documentation: Operating manual, spare parts catalog, electrical and pneumatic circuit diagrams in German are included (pp. 19-20). 💰 Price € 29,900,- net excluding VAT. • Shipping costs: Available on request throughout Europe • Delivery time: Immediately available • Inspection and collection: Possible at any time by arrangement (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.)

Condition: good (used), Cantilever shelving, single-sided, 60cm arms, with chipboard panels, SSI Schäfer – used: Price ex works: only €850 (net), disassembled, packaged, and loaded Manufacturer: SSI-Schäfer Type: Cantilever Year of manufacture: unknown Frame height: approx. 2m Number of frames: 4 pieces (2 base units) Axle distance: measurement was forgotten, should be approx. 1m plus a cross brace as a connector Arms installed Incl. anti-roll safety device 5 arms per frame Frame load capacity: 1,650kg Support profile: U 120 Cantilever load capacity: 250kg Cantilever length: 600mm Rjdpfx Aozqzrajlascf Profile: U 70/50/4 incl. 28mm chipboard panels Condition: good Available: immediately Location: Leipzig

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system Rjdpfx Aox Ari Helaecf 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 2,000 mm, total height: 2,100 mm, total width: 1,300 mm, input voltage: 240 V, overall weight: 350 kg, pipe diameter (max.): 20 mm, product height (max.): 200 mm, product length (max.): 160 mm, product length (min.): 200 mm, Liquid filling machine for pouch packaging. The machine produces pouches from flat film by welding four sides. It is suitable for filling sauces, creams, salad dressings, and other liquids in the food, cosmetics, and non-food industries. Made in Hungary. The size can be easily adjusted from 10 to 70 grams. Easy to clean, reliable machine. Rcjdpfszv E A Tox Alaof

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Rcodpfxezwfppo Alaof Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Type: 91510 Machine number: 8708418 Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2017-2034, type of input current: AC, input voltage: 230 V, type of cooling: air, electrical fuse: 16 A, open-circuit voltage: 95 V, welding current at 100% duty cycle: 120 A, protection type (IP code): IP21, welding current (min.): 2 A, welding current (max.): 165 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Orbitalum Orbimat 165 CA orbital welding package for tube welding. The package includes: - Orbitalum ORBIMAT 165 CA orbital welding power source / control unit - 2 x Orbitalum ORBIWELD 76S closed orbital welding heads - Orbitalum GFX 3.0 pipe cutting / beveling machine with GF10 drive unit - Hoses, cables, collets / inserts, and accessories as shown in the photos Component details: - ORBIMAT 165 CA: year 2017, serial number 2017-2034 - ORBIWELD 76S #1: year 2020, serial number 3764 - ORBIWELD 76S #2: year 2016, serial number 2489 - GFX 3.0 with GF10 drive unit: year 2016 Redpfx Alszq A Enjascf The equipment is used and sold as-is. A power-on inspection is possible. The ORBIMAT power source starts up, and ORBIWELD head rotation / test movement is demonstrated in the video. A full welding test is not currently available. Condition and completeness are as shown in the photos. Loading: We have forklift / pallet handling capabilities on site and can load the equipment onto the buyer’s truck. Removal: Available immediately. The removal timeline can be agreed upon with the buyer. Transportation is at the buyer’s expense.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, - Year of manufacture: 2015 Rsdpfxsy Rx Smj Alaocf - Weight: 190 kg - Overall length (with roller conveyors): 5,500 mm - Width: 1,200 mm - Height: 2,050 mm Other dimensions: Roller conveyor width: 360 mm The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój A video demonstrating the machine in operation is available. Delivery possible.

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Rcsdpfx Alezvp Uyeasf

Condition: used, Year of construction: 2023, Max. throughput: 156 cartons or 15 pallets/h, max. pallet height including load carrier: 1989mm, max. pallet weight including load carrier: 800kg, equipment: KOCH gantry/axis system with automatic carton and pallet handling, automatic empty-pallet and interlayer handling, product infeed with barcode recognition, extensive product and pallet conveyor technology, automatic pallet wrapping using a Lachenmeier wrapper, automatic pallet labeling by Bluhm Systeme, automatic pallet weighing by Bizerba, several stationary and mobile operator panels, central KOCH system control with remote-maintenance capability, extensive safety and protective equipment, including documentation. The system was only lightly used and has very low operating hours. Rcodpfx Alezwfr Roaef

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: SFV 80-N, Included with the machine: A wide selection of different forming dies for packaging timber products with various cross-sections. Machine documentation and operating manuals. Suitable for packaging planed timber and various other wood products. Rodpfx Alszuwcpsaocf The machine can be inspected and tested on-site: Observe the machine in operation. Perform a test run. Inspect the operation of the rollers, chains, and other mechanisms. Inspect all included forming dies. The machine is operating correctly and is ready for production.

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. Rcedpfxoznlbgs Alaef The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The combined metal detector and checkweigher shown in the pictures is available separately and is not included in the listed price. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 21A10, total length: 3,120 mm, total width: 700 mm, total height: 1,930 mm, overall weight: 600 kg, input voltage: 380 V, type of input current: three-phase, power: 5.5 kW (7.48 HP), Flowpack packaging machine for packaging with PPL reels, equipped with a die for euroslot hole on the sealing and cutting unit. Redpfx Aexmkpgelascf

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Selling a case packing / carton sealing machine from Hagenauer + Denk KG (H+D). Suitable for automatically sealing shipping cartons with adhesive tape. Includes conveyor technology with roller conveyors, as shown in the photos. Technical data according to the nameplate: Rcodpfxozu Anqo Alasf * Manufacturer: Hagenauer + Denk KG (H+D) * Model: HD-10-5-5-7=70/50-50 * Machine No.: 20210 * Year of manufacture: 2021 * Connection: 3 x 400 V, 50 Hz * Power: 0.2 kW Function: The carton is fed via the roller conveyor and automatically sealed with adhesive tape. Ideal for shipping departments, warehouses, picking, and production. Scope of delivery: * Carton sealing machine / case packing station * Roller conveyor technology as shown in the pictures.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Rcedpfxjyzxgfs Alaof Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: good (used), Consisting of: “Ishida” Multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Performance: up to 2 x 40 weighing’s/min Filling weight (max. weight): 1.500 g Accuracy: Average value 0 to + 1.0 g Weighing range: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA + Vertical flowpackaging line “Rovema” Type VPK260 - 14110 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + Redozwu Diepfx Alajcf Vertical flowpackaging line “Rovema” Type VPK260 - 14111 yoc 2001 Performance (mech.) cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Air humidity (max.) (%): 15…95; no condensation + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 70 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 1,5 kg Filling material dimensions: Approx. 180 x 70 x 300 mm Filling weight: 1,5 kg Grouping scheme: 1 x 5 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 6kW Packaging machine: Type: Elematic 3000 LS/335

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Rcodpfx Alsxqf U Soasf Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Flexibility: Can also be configured for food and chemical products in other versions of the machine.

Condition: used, We offer pallets of approximately 5,000 kg open-type compressors, featuring a mix of Bitzer, DWM, and Bock units. This lot has been assembled for trade, export, and stock building purposes and is sold as a single complete batch. The entire package is available for one fixed package price. No individual sales are offered. If you have any questions or require additional availability, please contact us. Rcsdpfx Alsycvkvjasf

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Rodpfjzwgiqsx Alascf

Year of construction: 2005, condition: used, functionality: fully functional, The deep-drawing machine is an automatic machine for forming, filling, and sealing. Its modular design is a key feature. These modules are arranged one after the other, in the sequence of operations. They are designed as independent units and can be exchanged within a given model series. Rodoy Txcqjpfx Alaocf tel. 694429279

Year of construction: 1979, operating hours: 500 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 123, We are selling a Bosch Höller 3 edge-sealing machine that underwent a general overhaul in 2022. The machine has been fully converted to servo drive and fitted with an S7 control system. Coloured or clear film is fed via a roller, folded into a bag measuring 11 cm wide by 15 cm high, and sealed. The grippers can be individually adjusted within the frame as required. Product feeding is via a screw feeder, which also operates fully electrically with all standard parameters. The machine is fully operational. Depending on the product to be filled, speeds of 40–60 bags per minute can be achieved. Rcedsizag Topfx Alajf

Condition: used, Multivac R272 CD Darfresh Thermoforming Packaging Machine The Multivac R272 CD Darfresh (MultiFresh) thermoforming packaging machine is designed for easy and efficient packaging of products in attractive vacuum skin packs (VSP). This packaging technology offers several advantages: Extended product shelf life The product remains securely fixed in place and does not shift during transport Premium product presentation with an attractive appearance The excess film along the sides is removed by two rewind rollers, while small film remnants are extracted by an integrated scrap film suction system. Packaging functions: Vacuum packaging MAP (Modified Atmosphere Packaging) SKIN (Vacuum Skin Packaging) The machine is entirely manufactured from stainless steel. Technical Specifications Production capacity: up to 10 cycles/min (depending on package size, film type, vacuum level, and machine settings) Control system: Multivac PLC with a user-friendly programmable control panel Tooling configuration: one format with a 3.1 layout (142.33 × 250 mm) Film width: 470 mm Index length: 250 mm Loading area length: 1,600 mm Vacuum system: 250 m³/h Busch vacuum pump with a 500 m³/h booster (Roots) pump Water supply pressure: 1–7 bar Compressed air pressure: 6–8 bar Power supply: 400 V (3+N, 50 Hz) Power: 20 kW Weight: 3,000 kg Year of manufacture: 2005 Machine dimensions (W × D × H): 8,200 × 1,100 × 2,200 mm Thermoforming Packaging Process The bottom film is unwound from the roll. The bottom film is heated and formed in the forming station. The formed trays are transported forward. Products are loaded into the trays in the loading area. The top film is unwound from the roll. The filled packages are sealed (vacuum, MAP, or SKIN packaging). The packages are cross-cut. The packages are longitudinally cut. The finished packages are discharged for further processing, such as metal detection and/or labelling. How Vacuum Skin Packaging (SKIN) Works In vacuum skin packaging, the product is placed on a plastic tray. A specially developed skin film is heated and tightly vacuum-sealed around the product, creating a "second skin." This packaging method offers several important benefits: An attractive premium presentation Maximum product shelf life The product remains firmly in position and cannot move within the tray Rcedpfx Alszlgpgoasf Ideal for upright or hanging retail display

Condition: excellent (used), Year of construction: 2009, Rovema Type ETO Year of manufacture: 2009 Carton folding and packaging Rcsdpfx Ajzwvtfolaef