Used Comall Carr 600 - 85/9 Q for sale (33,237)

Year of construction: 2024, condition: new, Trolley for carriage of sashes and frame COMALL CARR 600 - 85/9 Q, new Nlsdpslfargjfx Aa Iec Technical specifications: - 9 compartments with working size 84 mm - Contact surfaces coated with non-scratch and shock-proof plastic material - Rollers for sash carriage - 4 wheels Ø 125 mm, 2 of them with locking device - Support: 560 Kg - Carton packing

Year of construction: 2024, condition: new, Trolley for handling and storing oversize sashes/frames COMALL CARR 900-93/15 Q, new Technical features: - Contact surfaces coated with non-scratch and shock-proof plastic material - Max. height sashes/frames 2500 mm Nledom H Twgjpfx Aa Isc - N° 16 couples of posts - 15 compartments with working size 93 mm - 4 wheels Ø 125 mm, 2 of them with locking device - Load capacity: 850 Kg

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1787, functionality: fully functional, temperature: 1,150 °C, total length: 23,700 mm, conveyor belt width: 620 mm, heating capacity: 320 kW (435.08 HP), pass-through height: 100 mm, The system has seen very little use and is in excellent condition. TECHNICAL DETAILS Maximum operating temperature: 1150°C Belt width: 620 mm Installed heating capacity: 320 kW in 8 zones Fuel: Natural gas Operation: Hydrogen + Nitrogen (N2 + H2) integrated Usable height: 100 mm Dimensions Infeed table length: 2 m Burn-off zone LED3 length: 1.5 m Sintering zone length: 7.5 m Rapid cooling zone length: 1 m Convective cooling zone length: 2 x 4 m Flame-free outlet with air shower length: 2 m Outlet table length: 2.7 m Total system length: 23.7 m Total system width: 2.3 m MACHINE DETAILS Natural gas consumption: 25 m³/h (80 mbar) N2 consumption: 45-65 m³/h (max. 80 mbar) H2 consumption: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temperature) EQUIPMENT Flame-free outlet Ceramic muffle Dual thermocouples Programmable Nlsdpfxozclphe Aa Isc Online diagnostic system Low NOx RS recuperative burners SiSiC burner tubes LED 3 de-waxing zone (utilizes the chemically bound energy of waxes and improves burn-off conditions, especially for heavy powder metallurgy parts (>0.9 kg)) "Target-Actual value belt speed comparison" function

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm Nodpfx Aaozc Rwwe Iolc

Condition: ready for operation (used), Siemens 1FT3076-0AF61-9 - Z permanent magnet motor SN:E0Q84600501005, Z= see nameplate, used, normal signs of use, 100% functional, scope of delivery as per photos Nedpfx Aasufcfio Islc

Condition: used, Year of construction: 1999, Transnorm belt conveyor 985-600-500 RA2420 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a SEW gear motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW Gear-drive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 0,8 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Nlodpfxjw Igbcj Aa Isc Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2026, machine/vehicle number: 93934631, fuel type: diesel, motor manufacturer: QSZ13-G10, General information Field of application: Construction Weights Empty weight: 5.255 kg Functional Generator capacity: 600 kVA Dimensions of cargo space: 451 x 160 x 250 cm CE mark: yes Other information Fuel consumption: 80 Liter per Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 875 l Additional information Please contact Team DPX for more information = Additional options and accessories = Nodpfx Aey T D Daea Ijlc - Battery - Control Panel - Steel canopy - Tank = Remarks = Including Coolant Heater and Battery Charger

Condition: new, Year of construction: 2025, fuel type: diesel, power: 360 kW (489.46 HP), motor manufacturer: Cummins QSG12-G4, General information Field of application: Construction Nlsdpfowddwhsx Aa Iec Weights Empty weight: 3.840 kg Functional Generator capacity: 450 kVA Dimensions of cargo space: 402 x 140 x 150 cm CE mark: yes Other information Fuel consumption: 66.7 Liter per Hour at 75% Load Generator: Stamford S4L1D-G41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 995 l Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: B24I437515, fuel type: diesel, power: 88 kW (119.65 HP), motor manufacturer: Cummins 6BTA5.9-G5, General information Field of application: Construction Weights Empty weight: 1.410 kg Functional Generator capacity: 110 kVA Dimensions of cargo space: 308 x 115 x 165 cm CE mark: yes Other information Nodpfjv Sib Nex Aa Islc Fuel consumption: 19.4 Liter per Hour at 75% Load Generator: Stamford UC274C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 400 l Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: A25I440860, fuel type: diesel, power: 88 kW (119.65 HP), motor manufacturer: Cummins 6BTA5.9-G5, General information Field of application: Construction Weights Empty weight: 1.890 kg Functional Generator capacity: 110 kVA Dimensions of cargo space: 310 x 118 x 195 cm CE mark: yes Other information Fuel consumption: 19.4 Liter per Hour at 75% Load Generator: Stamford UC274C1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 400 l Production country: PT Additional information Please contact Team DPX for more information Nlodpev Hk Dzefx Aa Ioc = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 10 h, load capacity: 5,000 kg, lifting height: 5,025 mm, free lift: 1,130 mm, fuel type: diesel, mast type: triplex, construction height: 2,470 mm, power: 55 kW (74.78 HP), fork carriage width: 1,300 mm, fork length: 1,200 mm, empty load weight: 6,930 kg, total length: 3,300 mm, drive type: Diesel, construction width: 1,455 mm, Diesel forklift Load centre: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: New machine Technical condition: New Nsdpfoyldtqjx Aa Iolc Front tires type: Superelastic Front tires size: 300x15-18 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 7.00x12-14 Rear tires condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, full cab, full free lift, interior mirror, beacon, wiper, reverse camera, armrest with mini lever for 4 hydraulic functions, direction switch integrated into armrest

Condition: good (used), Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool Nsdpfx Aoxupnqea Ielc -Length: 600 mm -Dimensions: see photos -Overall dimensions: 600/85/H115 mm -Weight: 40.6 kg

Condition: used, functionality: fully functional, Forklift Kalmar LMV 9-600 Load capacity 9 T Nsdpfsvq Im Usx Aa Iolc Diesel

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 13,230 mm Number of bays per shelf row: 06 pcs. Number of levels plus base level: 04 pcs. The scope of delivery includes: 07x pallet rack uprights, used Material color: sendzimir galvanized Frame type: P 95 Frame profile dimensions: 90 x 75 x 2.50 mm Adjustment grid: 50 | 50 mm Bay load: 10,400 kg with buckling height 1,500 mm (with at least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 6,295 mm high 850 mm deep 48x pallet rack traverse, used Material color: grey INP profile: 80 x 42 mm Beam type: TRV1-210-08-l Bracket: 5 HK (hooks) Clear width: 2,100 mm 96x locking pin, used Version: completely galvanized Nodpfx Aetpndhoa Iolc For securing the side rails against unintentional lifting out 28x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shim plate, used Version: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 5,700 mm Number of bays / row of shelves: 03 pcs. 1,800 mm each Number of levels plus floor level: 02 pcs. The scope of delivery includes: 04x pallet rack uprights, used Material color: sendzimir galvanized Frame type: P73 Profile dimensions: 75 x 75 x 2.00 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 1,900 mm high 850 mm deep Nsdpfx Aajub Sbfj Ijlc 12x pallet rack beams, used Material color: RAL 5010 gentian blue INP profile: 80 x 42 mm Beam type: TRV1-180-08-l Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per truss pair 2,800 kg, with evenly distributed load 24x safety pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 16x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 8x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 139 h, lifting height: 4,750 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork length: 1,590 mm, tire condition: 95 %, Equipment: cabin, sideshift, Unicarriers 1600 kg electric forklift truck. Excellent machine in perfect condition. Looks like new. Enclosed cabin with heating. Has always been used and stored indoors. Year: 2018 Operating hours: 139 with ignition on. Only driven/used for 60 hours. Lift height: 475 cm. Machine height: 212 cm. Mast: Triplex free lift. Fork side shift. Fork length: 159 cm. Shorter forks may be installed. Includes charger for 400 Volt 16A. Transport can be arranged. Nljdpfx Asw Ib U Rea Isc

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B +Trackmotion 2.9 meter,complete as new DTC 7 hours 2019 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Nledpoyl Avqsfx Aa Ioc

Condition: ready for operation (used), Heidenhain EQN 1325 2048 62S12-78 G3 rotary encoder. 527 858-06, serial number 20009224A, used, in good condition, 100% functional, scope of delivery as shown in the photos. Njdpfx Aaszc Txke Ielc

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. Njdpfx Aol Dw D Eoa Ijlc The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: ready for operation (used), REFU 317/03-AB01 frequency converter SN: 6000-1697-0006 - 3AC 0-4000V / 50/60Hz, used, good condition, 100% functional, scope of delivery as per photos Nsdpfetvcucex Aa Ijlc

Condition: new, SKF S71928 ACD / DBAVQ6485 Angular contact ball bearing set (set = 1 pair), unused in original packaging, 100% functional, scope of delivery as per photos Nsdpoxah Adsfx Aa Ijlc

Condition: new, Brinkmann TGL802/390+001 pump SN R0902368564- 20636001, unused, with signs of storage, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nsdpfoqdm I Aex Aa Islc

Condition: ready for operation (used), Heidenhain / Siemens 6FX2001-5JE20-2QC0 encoder ID 108 8745-64 W5 SN 68536249A AM20DQI72.035-512 6TB10-V4, used, in good condition, 100% fully functional, scope of delivery as per photos. Nodsx Dwq Eopfx Aa Ijlc

Condition: new, Siemens 1FW6160-0WB10-2EF3 torque motor SN:YFN5633962801001, unused with storage marks, 100% functional, scope of delivery as per photos. Nledpfxox Dvcae Aa Isc

Condition: ready for operation (used), Siemens D300/90 6RA2968-5DV01-7HA1 E/R unit, serial number: Q6/593569, used, in good condition, fully functional, delivery as per photos. Nlsdpfxjy Nr Tnj Aa Ijc