Used Convotherm Oes 6.10 for sale (221)

Condition: good (used), Convotherm Combi oven Model: OES 6.10 Stainless oven, digital control system, internal dimensions 600mm x 450mm x 500mm, 3Ph Hjdpjgthziefx Aaiofk

Condition: as good as new (ex-display), The Convotherm C4ET6.10ES combi oven offers three primary operating modes: hot air, steam, and combi steam. The appliance is equipped with low temperature and Delta-T settings, making it ideal for long cooking times for various foods such as meat, poultry, and fish. These settings allow the operator to cook food overnight. During prolonged, slow cooking, food retains more moisture and remains exceptionally tender. The Delta-T function uses a core temperature sensor to continuously monitor the food’s internal temperature and automatically adjusts heat for even results. The easyTouch control panel features an intuitive 9-inch full touchscreen interface. The Convotherm C4ET6.10ES combi oven is equipped with a ring indicator showing operating status in three stages: 'preheating', 'in progress', and 'ready'. This model includes an integrated on-screen help function, complete with tutorial videos to facilitate usage. The control panel features a permanent antibacterial surface to minimize bacterial transfer. Operators can program up to 399 recipes, each with up to 20 steps, ensuring consistent product output. The unit also features a self-cleaning/wash function with detergent dispensers. Comes with an additional smoker kit and function, a side-sliding door, dedicated extraction hood, and a stand. Factory warranty included; offered significantly below standard price. Electric powered Injection spritzer steam generator 3 primary operating modes: hot air, steam, and combi steam Retherm setting for optimum reheating of cooked foods Low temperature and Delta-T settings enable high-quality results through slow cooking EcoCooking setting conserves energy over extended cook times Cooking chamber accommodates 7 shelves for pans, baskets, racks, and plates Preheating and cooling functions available Hjdpfx Aajxwdayoiofk Core temperature probe for accurate monitoring 5-speed user-adjustable fan for uniform heat distribution Eco, express, and standard cycles with automatic cleaning system Antibacterial door handle and control panel help reduce bacterial transfer Safety latch protects users from steam during operation in steam mode 208-240 V / 60 Hz / 3 phase / 25.0–28.5 A / 9–11.8 kW Overall Dimensions: 34.5 in W x 31.25 in D x 30 in H

Condition: reconditioned (used), convotherm 20.10 C4 Oven after complete overhaul. Fully operational, ready for use. Power: 38.9 kW, 56.2 A, 400 V. Hjdpfx Aajx Rpqmjisfk

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: - 2x12 spinning positions - SE9 boxes - Corolab - 1 start-up trolley - SRZ (precision winding) - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Hsdpfxow Rldzo Aaisfk Written inquiries only, please.

Condition: excellent (used), functionality: fully functional, Thermo Scientific ARL 3460 OES Spark Emission Spectrometer Manufacturer: Thermo Electron Corporation / Thermo Fisher Scientific Model: ARL 3460 Machine Type: Optical Emission Spectrometer (OES) / Spark Emission Spectrometer Application Area: Metal Analysis / Material Testing For sale is a used Thermo Scientific ARL 3460 OES Spark Emission Spectrometer for highly precise analysis of metallic materials and alloys. The optical emission spectrometer is suitable for quality control, incoming goods inspection, foundries, steel mills, metal processing, research, and industrial testing laboratories. The system is supplied including an industrial PC, original software, USB license dongle, and SERCAL MP-2000 Rare Gas Purifier. Technical Data: Manufacturer: Thermo Electron Corporation / Thermo Fisher Scientific Model: ARL 3460 Type: Optical Emission Spectrometer (OES) / Spark Emission Spectrometer Country of Manufacture: Switzerland Supply Voltage: 230 V AC Mains Frequency: 50 Hz Mains Connection: 1 Phase Power Consumption: 3.5 kVA Measurement Method: Optical Emission Spectrometry (OES) Spark excitation for material analysis Fast and precise analysis of metallic materials and alloys Analyzable Elements: According to the visible software configuration, the following analysis elements or spectrometer lines are set up: Copper (Cu) Chromium (Cr) Iron (Fe) Manganese (Mn) Uranium (U) Niobium (Nb) Titanium (Ti) Zirconium (Zr) Phosphorus (P) Sulfur (S) Boron (B) Arsenic (As) Tin (Sn) Carbon (C) Aluminum (Al) Calcium (Ca) Molybdenum (Mo) A total of 22 spectrometer lines are set up in the device software. Software: Thermo WinOE Version 3.2.3 MP1 Gateway Version 1.0-90 ASLViewer Version 1.0-16 ASLEngine Version 1.2-1 Original USB license dongle included SERCAL MP-2000 Rare Gas Purifier: Manufacturer: SERCAL Type: MP-2000 Rare Gas Purifier Gas purification for Argon For supplying the OES analysis system Dimensions: External dimensions (W × D × H): approx. 1,665 × 910 × 1,190 mm Weight: approx. 450 kg Hodpfx Aozkuftsaisfk Equipment: Thermo Scientific ARL 3460 OES Spark Emission Spectrometer Dell Industrial PC Monitor Keyboard Mouse Original Thermo WinOE Software Original USB license dongle SERCAL MP-2000 Rare Gas Purifier Connection cables Service markings present Original documentation Accessories as shown in the pictures Areas of Application: Metal analysis Material testing Quality assurance Incoming goods inspection Foundries Steel mills Metal processing Melting plants Testing laboratories Research and development Transport Data: Dimensions (W × D × H): approx. 1,665 × 910 × 1,190 mm Weight: approx. 450 kg Transport by freight forwarder required. Loading with a forklift is possible. Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear are present. Software, original USB license dongle, and extensive accessories are included. Scope of Delivery: Thermo Scientific ARL 3460 OES Spark Emission Spectrometer Dell Industrial PC Monitor Keyboard Mouse Original Thermo WinOE Software Original USB license dongle SERCAL MP-2000 Rare Gas Purifier Connection cables Original documentation Accessories as shown in the pictures Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: excellent (used), Thermo Fisher Scientific iCAP 6300 Duo ICP-OES Spectrometer Manufacturer: Thermo Fisher Scientific Model: iCAP 6300 Duo Series: iCAP 6000 Machine Type: ICP-OES Emission Spectrometer / Elemental Analyzer Part No.: 8423 100 63081 Origin: Made in England For sale is a used Thermo Fisher Scientific iCAP 6300 Duo ICP-OES emission spectrometer. This laboratory instrument is suitable for simultaneous multi-element analysis of liquid samples in laboratories, research institutions, quality assurance, and in the chemical, pharmaceutical, and metal processing industries. The Duo technology enables both axial and radial plasma observation and ensures high sensitivity with a wide linear measurement range. Technical Data Measurement Principle: ICP-OES (Optical Emission Spectrometry) Design: Duo (axial and radial plasma observation) Optics: Echelle Spectrometer Detector: CID86 Wavelength Range: 166 – 847 nm Spectral Bandwidth: approx. 0.007 nm Supply Voltage: 100 – 240 V AC Mains Frequency: 50 / 60 Hz Power Consumption: 4000 VA Dimensions (W × D × H): approx. 832 × 744 × 589 mm Weight: approx. 85.5 kg Equipment Echelle Optics CID86 Detector Duo Technology (axial / radial) Solid-State RF Generator Optics purging with nitrogen or argon Peristaltic Pump Water-cooled Spectrometer System Laboratory instrument for simultaneous multi-element analysis Accessories as shown in the pictures Application Areas Environmental analysis Water analysis Chemical analysis Metal analysis Pharmaceutical industry Food analysis Quality assurance Research and development Universities Testing laboratories Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Hfodpfx Aszki Ipsaiek The table or other items not explicitly mentioned in the photos are not included in the sale. Scope of Delivery Thermo Fisher Scientific iCAP 6300 Duo ICP-OES Spectrometer Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2021, operating hours: 1,165 h, load capacity: 6,000 kg, fuel type: diesel, construction height: 10,000 mm, gearing type: automatic, Equipment: cabin, head guard, * Magni TH 6.10-D7/D telescopic handler * Year of manufacture: 2021 Hfjdpfx Asyq Dbloaisk * Operating hours: 1,165 h * Radio remote control * Max. lifting capacity: 6,000 kg * Lifting height: 10 m * 4x4x4 / all-wheel drive / all-wheel steering * Hydraulic connections available * Rear-view camera * More photos and videos via Whatsapp * Information provided without guarantee, subject to prior sale.

Condition: excellent (used), Optical Emission Spectrometer Ultima 2 benchtop unit, sequential spectrometer with a 1m monochromator, 2400 g/mm grating in first and second order, 160-800 nm without image Hfodpfx Aozhkccsaiek Rapid overview analysis IMAGE: Rapid overview analysis IMAGE NAVIGATOR for JY 2000-2, JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the RF coil of the Ultima 2 Argon humidifier – for the analysis of solutions with high salt content. ULTIMA 2 ICP-OES – Optical Emission Spectrometer Reliable, highly efficient 40.68 MHz semiconductor generator Complete and precise wavelength scan from 160 to 800 nm as standard Highest practical resolution

Year of construction: 2000, condition: ready for operation (used), travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,200 mm, spindle motor power: 27,000 W, spindle speed (max.): 3,000 rpm, number of axes: 3, This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine. Hfjdpfx Asyguz Usaiok • Table size: 1,300 x 1,100 mm • W-axis travel (boring head): 600 mm • B-axis rotation (rotary table): Continuous • Spindle orientation: Horizontal • Tool magazine: 30 positions Technical Specification Taper Size ISO 50

Condition: like new (used), DEMONSTRATION MACHINE Hjdpfx Ajyb Sfaoaiofk For sale is an as-new JET Oscillating Edge Sander OES-80CS featuring a 400V motor / 2,800 watts and a belt speed of 17 m/s. The demonstration machine is in its original condition, so you receive the full warranty. Technical Data - Motor: 400 V / 2,800 watts - Belt speed: 17 m/s - Belt dimensions: 150 x 2,260 mm - Belt inclination: 90° – 180° - Belt table dimensions: 810 x 180 mm - Extension table: 250 x 300 mm - Oscillation stroke: 13 mm - Oscillations per minute: 108 - Extraction port diameter: 100 mm - Dimensions: 1,300 x 670 x 1,230 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET OES-80CS, edge sander, oscillating, woodworking, 400V, machine, belt sanding technology, workshop equipment, industrial quality, 150x2260, belt Reference: R-A0117

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Hjdpfet Ei Huex Aaijfk Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: used, 1x bending knife from a VOEST press brake Hedpfx Aoy Tbvmeaisfk Length: 4050 mm Weight: approx. 120 kg For further dimensions see pictures.

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 115 kg Hfedszcgh Espfx Aaisk For further dimensions see pictures

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Hjdswxfaaspfx Aaiofk

Condition: excellent (used), Year of construction: 1995, Maximum distance between centers: 1,000 mm Diameter over lathe bed: 410 mm Spindle bore: 54 mm Taper for tailstock: MK 4 Machine weight: approx. 2.1 tons Includes: 3-jaw chuck Includes: Multifix quick-change tool holder Hfsdpfszd S Daox Aaisk Includes: Live center

Condition: used, Year of construction: 1980, centre distance 1500 mm 210 Hsdpfx Aasztfu Rjijfk serial number 1289 multifix ja ja weight 1,45 t

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages Hedpfx Aaey Uhxkeiefk - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: good (used), Lathe, VOEST-ALPINE, spindle speeds 21 - 1,500 rpm. Hedjztc H Rjpfx Aaisfk

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 157, working width: 400 mm, overall weight: 2,200 kg, total width: 400 mm, For sale: a complete, used line for applying and curing oil/oil-wax on wooden floors (Soest + Prochera). I am selling a set of four machines that form a line for oil-waxing floorboards, used in a production facility for two-layer parquet in Krotoszyn. The line has not been used for approximately 3 months and has been regularly maintained and repaired during this time. The set includes: 1. SOEST RC-L-400 (Netherlands): application unit with a roller, serial number 157, year of manufacture 05/2017, total weight 580 kg, CE marking. 2. SOEST VP-400-2P-B (Netherlands): spreading/brushing unit (spreading oil, stain, or other coatings using pads and brushes), serial number 264, year of manufacture 05/2017, total weight 480 kg. 3. SOEST UV-3-400 (Netherlands): curing/drying unit, serial number 286, year of manufacture 04/2018, total weight 780 kg, CE marking. 4. PROCHERA SPL1-400C (Poland, Ziębice): brushing/polishing unit, no. 7, year of manufacture 2024, weight 355 kg, power 2 kW, CE marking. All units have a working width of 400 mm and are equipped with integrated conveyor belts and control/electrical cabinets. Total weight of the set: approx. 2,195 kg. Technical condition: unused for approx. 3 months, regularly maintained and repaired. Price: PLN 182,500 net (negotiable), plus VAT. Note: the line is sold as used, in its current condition. Before purchasing, an on-site inspection and individual verification of suitability for a specific type of finish are recommended (e.g., UV oil vs. classic oil-wax cured by air). Hfsdpezrm Ucefx Aaisk

Condition: ready for operation (used), Year of construction: 1987, A Hoes drainage trencher for laying drainage pipes and trenches for subsurface drainage is available. Engine: Deutz F 8 L 413 F, Power: 157kW, Torque (1500rpm): 760Nm, Fuel tank capacity: 435l, Oil tank capacity: 125l, Max. working/travel speed: 2400m/min/4750m/min, Track length: 4900mm, Track gauge: 2120mm, Track shoe width: 550mm, Specific ground pressure: approx. 0.26kp/cm², Max. trenching chain speed: 5.69m/s, Chain tensile strength: 640kN, Chain pitch: 100mm, Max. trench width: 290mm, Max. trench depth: 1850mm. Machine dimensions X/Y/Z: approx. 9650mm/2700mm/3400mm, Weight: approx. 13500kg, Operating hours: approx. 8470h. The machine is equipped with a laser guidance system. Includes many spare parts. Documentation available. An on-site inspection is possible. Hfodpfx Aasznmzbsisk

Condition: new, Year of construction: 2008, functionality: fully functional, 1 x Vibratory feeder Jöst FMF 0771964 Year of manufacture: 2008 Hfodpfoznw A Aex Aaisk (unused/new) with rubber lining. Infinitely variable speed. Internal dimensions of the feeder: Length: 790 x width: 335 mm x height: 135 mm Discharge height: 705 mm The machine can be inspected while powered on.

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 125 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Hodsfbbqhspfx Aaiefk

Condition: used, functionality: fully functional, load capacity per storage section: 8,000 kg, total length: 21,900 mm, total height: 4,000 mm, total width: 1,100 mm, shelf height: 4,000 mm, support length: 4,260 mm, shelf length: 21,900 mm, load capacity: 40,000 kg, overall weight: 1,000 kg, frame height: 4,000 mm, load per truss pair (max.): 1,600 kg, frame width: 1,100 mm, number of shelf rows: 1, transport width: 1,200 mm, transport height: 1,200 mm, transport length: 4,350 mm, Pallet racking Voest 22 meters, used 🧰 Product features • Manufacturer: Voest • Color: green • Condition: used, see photos • Frames: 6 units, pre-assembled 4000 x 1100 mm • Beams: 20 units with 4260 cm clear width, profile 150 x 50 mm • Safety: 40 units, galvanized safety pins • Fasteners: 24 units, Hilti concrete anchors • Load capacity: 1,600 kg per level • Field load: 8,000 kg • Load capacity sign: included Hfjdpfozdurajx Aaisk Deep beams, insert grates, and insert shelves available at an extra cost. 💰 Price €990,– net, excluding VAT • Quantity discount: on request • Shipping costs: available throughout Europe, on request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment Constantly over 5,000 meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, details, and prices as well as prior sale reserved! See our general terms and conditions; all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse equipment in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 meters of racking promptly available • 20,000 m² of storage platforms & steel structures immediately available • Weekly 30–50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete, all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including thorough clearing. 2. Commission auction: Conducting auctions on behalf of clients. Our full service with our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for a galvanized heavy-duty rack / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 1972, swing diameter 2200 mm centre distance 9500 mm turning diameter over bed 2200 mm workpiece weight 70 t turning speeds . U/min 4-jaw-chuck diameter 2100 mm control Siemens type Sinumerik 850 T mm transmission ratio . total power requirement . kW weight of the machine ca. . t Single Carriage Tailstock Hydrostatic Bed Chip Conveyor Serial Number: 27486 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Hfedpfxozbc Apo Aaijk apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1991, Turning lathe, VOEST-ALPINE-STEINEL, Type: DA 180, Year of manufacture: 1991, with 2-axis digital display ELESTA. Center height: 180 mm Distance between centers: 1000 mm Spindle bore: 52 mm Spindle speeds: 44-2000 rpm Chuck diameter: 200 mm, Tool holder: MULTIFIX - B. Hsdpfx Aaeziwy Reijfk In ready-to-use condition.