Used Cormak Magnetic Holder for sale (9,826)

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM CNC Router (2100 × 4200 mm) 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces of various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. 2. HQD Spindle High-performance 9 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, delivering excellent machining quality while maintaining high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. A centralized automatic lubrication system continuously lubricates the linear bearing blocks and ball screw, minimizing maintenance requirements and extending component life. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in improved machining accuracy and superior surface finish. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump & Dust Extraction Hood (Optional) Four independent vacuum zones for efficient workpiece clamping. 7. Industrial Control System & Software Equipped with the NK-105 G3 CNC control system. Compatible with the latest CAD/CAM software solutions. Optional UCanCAM V13 software available in Polish/English versions. Technical Specifications Working Area 2100 × 4200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Kdsdpfx Aievupu Us Rer Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish/English version) Machine Dimensions 5070 × 2870 × 1900 mm Machine Weight 3350 kg

Condition: new, Year of construction: 2026, functionality: fully functional, RGL600 Magnetic Base – Stable Support for Tapping Arms The RGL600 magnetic base is a professional solution designed for mounting tapping arms in locations where permanent attachment of the device to the work surface is not possible. Thanks to its exceptionally powerful magnet and compact design, it provides safe and stable mounting for tapping arms, tapping machines, and electric tapping units directly at the workstation. Main advantages of the RGL600 magnetic base Maximum holding force: 600 kg – enables stable mounting of even heavier tapping arms. Compact dimensions – allow use even in workplaces with limited space. Universal mounting holes – 70 mm spacing and M8 threads ensure easy integration with most CORMAK tapping arm models. Solid construction – manufactured from durable materials, providing high resistance to intensive use. Mobility and flexibility – the base can be quickly moved and positioned anywhere with a ferromagnetic surface. Design and technology The RGL600 magnetic base is equipped with high-quality permanent magnets that provide reliable holding force even under significant dynamic loads. The body is made of precision-machined steel alloy, ensuring high manufacturing accuracy and long service life. The mounting system has been designed to fit popular CORMAK tapping arm models, including electric tapping machines: CORMAK RGE16PW, RGE30PW, RGE36PW×1200, RGE36PW×1700, RG24PW×1200, RG24PW×1700, RG36PW×1700. Precision and work efficiency Thanks to the RGL600 magnetic base, the tapping arm maintains optimal rigidity and stability during operation. This improves tapping accuracy, eliminates positioning errors, and reduces the risk of damaging threads or tools. The magnetic mounting system also significantly shortens workstation preparation time, increasing overall productivity. Technical specifications Parameter Value Maximum holding force 600 kg Mounting hole spacing 70 mm Thread diameter 8 mm Kdsdevugxkjpfx Ai Rer Net weight 23 kg Overall dimensions (L × W × H) 282 × 122 × 215 mm

Condition: used, Year of construction: 2026, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm Kodpfszp E A Tjx Ai Rjdr THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys PLEASE NOTE!!! This machine is a returned item; it has bodywork and paintwork damage but is in working order. NO WARRANTY!!!

Condition: new, Year of construction: 2026, CORMAK TYTAN 210 × 400 VARIO Universal Conventional Lathe (230 V) The CORMAK TYTAN 210 × 400 VARIO 230 V is a compact universal conventional metal lathe designed for precision machining in workshops, toolrooms, maintenance departments, and small manufacturing facilities. Featuring infinitely variable spindle speed control, a rigid machine construction, and extensive threading capabilities, it delivers excellent machining accuracy and everyday operating convenience. It is a reliable conventional lathe suitable for single-piece production, maintenance work, and prototype manufacturing. Powered by a 750 W motor combined with an electronic variable-speed drive, the machine provides smooth and stable performance even when machining demanding materials. The spindle speed range of 50–2,500 rpm allows operators to select the optimum cutting speed for both rough turning and precision finishing operations. Key Features Infinitely variable spindle speed from 50 to 2,500 rpm 750 W / 230 V motor providing smooth and reliable operation Rigid machine construction for high machining accuracy 4-way tool post for quick and convenient tool changes Capability to cut both metric and imperial threads MT3 spindle taper with 21 mm spindle bore Forward and reverse spindle rotation for increased versatility Hinged spindle safety guard for improved operator protection Integrated chip tray for easy cleaning and maintenance Standard Equipment 3-jaw self-centering chuck Internal and external chuck jaws Change gears for thread cutting MT2 dead center Kdodpfozqzi Esx Ai Ror Oil can Chip tray Chuck key and tool post wrench Open-end wrenches and hex keys Spare fuses Operating manual CE Declaration of Conformity Optional Equipment Lathe stand 4-jaw independent chuck Tool holders Live centers Turning tools Tailstock drill chucks Technical Specifications Specification Value Swing Over Bed 210 mm Swing Over Cross Slide 135 mm Distance Between Centers 400 mm Bed Width 100 mm Spindle Bore 21 mm Spindle Taper MT3 Spindle Speed Control Variable Spindle Speed Range 50–2,500 rpm Metric Threads 14 Metric Thread Range 0.3–3 mm Imperial Threads 10 Imperial Thread Range 10–44 TPI Longitudinal Feed Range 0.089–0.198 mm/rev Tool Post Type 4-way Compound Slide Travel 65 mm Cross Slide Travel 80 mm Carriage Travel 276 mm Tailstock Quill Travel 50 mm Tailstock Taper MT2 Main Motor (S1/S6) 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Machine Length 900 mm Machine Width 400 mm Machine Height 1120 mm Weight (with stand) 63 kg

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1000 VARIO Universal Lathe The CORMAK TORNADO 360×1000 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing plants, toolrooms, and maintenance workshops. Its rigid construction, 1,000 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting ensure excellent rigidity, stability, and repeatable machining performance, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1000 VARIO Universal Lathe 1,000 mm distance between centers enables machining of long shafts, sleeves, and other extended workpieces. Hardened and precision-ground bed (195 mm wide) provides excellent wear resistance and effectively dampens vibrations. 52 mm spindle bore allows machining of larger-diameter bar stock without prior preparation. Camlock D1-5 spindle nose ensures fast, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and reliable performance under load. Variable spindle speed (VARIO) from 75–2,000 RPM allows precise adjustment for different materials and machining operations. Supports both metric and imperial thread cutting, increasing the machine's versatility. Accommodates 16 × 16 mm cutting tools, making it compatible with professional turning tool holders. Rigid Construction for High Machining Accuracy The lathe is built around a heavy-duty cast iron frame whose substantial weight and wide guideways effectively minimize vibration during machining. The hardened and precision-ground bed maintains its geometry even under intensive use, ensuring consistently high machining accuracy and excellent surface finish. The spindle is mounted on precision bearings and features a Camlock D1-5 spindle nose for quick chuck changes and maximum rigidity. Its 52 mm spindle bore enables machining of larger-diameter materials, expanding the machine's application range. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis SINO digital readout (DRO) Chip tray and integrated tool drawers Coolant system LED work light Kdodpfeznt I Ijx Ai Rsr Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 225 mm Distance between centers 1,000 mm Bed width 195 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 75–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Tailstock quill travel 90 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,700 × 850 × 1,600 mm Weight 550 kg

Condition: used, Year of construction: 2026, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Maximum distance of the base from the spindle holder 1075 mm Table dimensions 475x425 mm Column diameter 92 mm Kjdpfx Aiszqr Eke Rsdr Motor power 1.5 kW 400V power supply Gravity cooling system Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment 1500W two-speed motor Left and right rotations DTR in Polish CE declaration Gravity cooling system Optional equipment feeder PLEASE NOTE! This machine is a returned item with damaged packaging. NO WARRANTY!

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1250 VARIO Universal Lathe The CORMAK TORNADO 360×1250 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing facilities, toolrooms, and maintenance workshops. Its robust construction, 1,250 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting provide outstanding rigidity, stability, and repeatable machining accuracy, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1250 VARIO Universal Lathe 1,250 mm distance between centers allows machining of workpieces up to 1,000 mm between the chuck and tailstock center, making it suitable for long shafts and cylindrical components. Hardened and precision-ground 205 mm bed offers excellent wear resistance while effectively minimizing vibration. 52 mm spindle bore enables machining of larger-diameter stock without additional preparation. Camlock D1-5 spindle nose provides quick, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and maintains reliable performance under load. Variable spindle speed (VARIO) from 70–2,000 RPM allows precise adjustment to suit different materials and machining operations. Supports both metric and imperial thread cutting, making the machine highly versatile. Compatible with 16 × 16 mm cutting tools, allowing the use of professional turning tool holders. Rigid Construction for Superior Machining Accuracy The lathe features a heavy-duty cast iron frame designed to minimize vibration during machining. Its substantial weight and wide guideways provide excellent rigidity, while the hardened and precision-ground bed maintains its geometry even under intensive industrial use, ensuring consistently accurate machining and high-quality surface finishes. The spindle is supported by precision bearings and equipped with a Camlock D1-5 spindle nose for rapid chuck changes and maximum rigidity. The 52 mm spindle bore allows larger-diameter materials to pass through the spindle, expanding the machine's machining capabilities. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis digital readout (DRO) Chip tray and tool drawer Coolant system LED work light Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 220 mm Distance between centers 1,250 mm Bed width 205 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 70–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Kedpfx Aisznt Rpo Rsdr Tailstock quill diameter 46 mm Tailstock taper MT4 Tailstock quill travel 100 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,930 × 850 × 1,600 mm Weight 600 kg

Condition: new, Year of construction: 2026, CORMAK 500 x 1000 (CJ6250Cx1000) Universal Lathe The CORMAK 500 x 1000 is a robust and precise conventional metal lathe designed for professional machining in industrial plants, tool rooms, and repair workshops. Thanks to its high bed rigidity, modern drive system, and versatile equipment, the machine ensures reliable and repeatable operation for both single-item and batch production. Key Advantages of the Machine Induction-hardened bed, resistant to torsion and vibrations – guarantees machining accuracy. Removable bridge section allows for machining parts up to 630 mm in diameter. Modern spindle bearing system with ball bearings ensures stable operation at high speeds. Precise speed and feed control – full control over process parameters. Rapid longitudinal and cross feeds – for faster operations. Digital readout for 3 axes – simplifies dimensional control and shortens setup time. Wide threading capabilities – metric, imperial, modular, and D.P. threads. Main motor 5.5 kW – high power for demanding material machining. Standard Equipment 3-axis digital readout 3-jaw self-centering chuck, Ø 250 mm Fixed steady rest Travelling steady rest Spindle reduction sleeve Foot-operated emergency brake Kdodpfoxd Upxex Ai Ror Full-length chip guard Coolant system 24V halogen work light Threading dial indicator Tool kit CE Declaration of Conformity User manual Brand-new machine with warranty Technical Specifications Parameter Value Swing over bed 500 mm Swing over cross slide 325 mm Swing in gap 630 mm Turning length in gap 260 mm Maximum turning length 1000 mm Bed type Induction-hardened Bed width 330 mm Chuck diameter 250 mm Spindle bore 80 mm Spindle nose D1-8 CAMLOCK Spindle speed range 24–1600 rpm Max tool size 25 x 25 mm Longitudinal feed range 0.072–4.038 mm/rev Cross feed range 0.036–2.019 mm/rev Cross slide travel 305 mm Compound slide travel 130 mm Metric threads 1–192 mm Inch threads 0.5–28 TPI Module threads 1–56 mm D.P. threads 8–56 D.P. Tailstock quill diameter 65 mm Tailstock quill travel 120 mm Tailstock taper MT 5 Digital readout 3-axis Main motor power 5.5 kW Coolant pump power 0.1 kW Machine weight 1700 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK SH-30S PRECISA 400V Spindle Moulder The CORMAK SH-30S PRECISA 400V spindle moulder is a powerful and precise woodworking machine designed for professional wood processing in industrial plants, woodworking shops, and craft workshops. Thanks to its stable construction, interchangeable spindle, and wide range of spindle speeds, it provides the highest standard of performance when milling straight elements as well as complex profiles and shapes. Main advantages of the machine Stable cast iron table construction – provides excellent vibration damping and smooth movement of the workpiece. Spindle speed range: 1400 / 4000 / 6000 / 9000 rpm – allows processing of various types of wood and wood-based materials. Reinforced and balanced spindle – ensures quiet, precise operation without vibrations. Height adjustment with scale – enables accurate setting of machining parameters. Complete standard equipment included – including tilting fence, workpiece holders, and assembly tools. Compliance with safety standards, DTR documentation, and CE requirements – ensures safe operation and conformity with regulations. Construction and technology The CORMAK SH-30S PRECISA spindle moulder is based on a high-quality cast iron body, which effectively eliminates unwanted vibrations during operation. The 620 x 510 mm working table has been precisely ground to ensure smooth and even movement of the workpiece. The 2.2 kW (400V) motor provides sufficient power even during intensive operation. With a spindle stroke of 100 mm and a maximum tool mounting height of 105 mm, the machine is capable of handling a wide range of milling applications. Precision and working efficiency The CORMAK SH-30S PRECISA spindle moulder combines high build quality with practical functionality. Multi-stage spindle speed adjustment allows optimal matching of operating parameters to the type of material and cutting tool being used. Precise guides and fences enable accurate positioning of reference points, resulting in excellent repeatability and consistently high-quality machining results. Applications The CORMAK SH-30S PRECISA is suitable for: Professional woodworking companies and production facilities, Furniture workshops and craft studios, Manufacturing decorative mouldings, grooves, tongues, tenons, and joints, Processing edges of straight and curved components. Standard equipment Tilting fence adjustable 60° left/right, Workpiece holder, Workpiece stop, Anti-slip feet, Assembly tools. Optional equipment Interchangeable spindle with ER20 collet chuck – enables quick machine setup changes and adaptation to different tools. Available at an additional cost of PLN 700 net. Kdodpfovugf Djx Ai Ror

Condition: new, Year of construction: 2026, The Cormak 25 column drill is a very efficient column drill, which is standardly equipped with a two-speed 1000 W motor with a rotation direction switch for right and left. The excellent design makes this device work very precisely. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. The set includes a 123 mm vice and a drill chuck. FREE MAGNETIC CHIP COLLECTOR ZW580! Technical data Maximum drilling diameter 25 mm Grip capacity 16 mm MK3 self-locking chuck The distance between the spindle and the column is 216 mm Maximum spindle stroke 80 mm Maximum distance of the table from the spindle 640 mm The distance between the pin and the column is 215 mm Maximum distance of the base from the spindle holder 1136 mm Table dimensions 355x355 mm Column diameter 92 mm Motor power 1000 W Overall dimensions 1635 x 642 x 356 mm Net weight 85 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 160 240 290 350 410 480 530 590 660 720 1190 1350 1510 1970 2100 3000 700 min-1 80 120 140 170 200 240 260 290 330 360 590 670 750 980 1050 1500 Standard equipment 1000W two-speed motor Left and right rotations DTR in Polish CE declaration Optional equipment cooling system feeder Kodpfx Aieridn Ss Redr

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1200 Electric Tapping Machine The CORMAK RGE36PWx1200 electric tapping machine is an advanced tool designed for efficient and precise thread cutting in industrial environments. It is ideal for both large production facilities and smaller workshops. Thanks to its innovative design and modern technologies, this tapping machine provides exceptional reliability, high operating speed, and minimizes the risk of errors and inaccuracies during the threading process. Main advantages of the CORMAK RGE36PWx1200 Electric Tapping Machine High-precision tapping: Thanks to the use of a servo drive and a tapping arm, the machine ensures excellent accuracy and repeatability when cutting threads in various materials. High efficiency: The tapping arm enables fast and effective thread cutting, significantly reducing operation time compared with traditional manual tapping methods. Modern control panel: The touchscreen control panel allows easy adjustment of parameters such as spindle speed, tapping depth, and thread direction. The interface is available in two languages: Polish and English. Tool cooling system: The standard micro-spray lubrication system effectively cools the tap, reduces lubricant consumption, and extends tool life. Improved working efficiency: The chip blow-off system effectively removes chips, improving visibility of the workpiece and increasing operator comfort. Universal application: With a wide tapping range from M6 to M36, the machine is an ideal solution for various industrial applications. Design and technology of the CORMAK RGE36PWx1200 tapping machine The CORMAK RGE36PWx1200 was designed for intensive operation in demanding industrial conditions. Its construction provides high resistance to wear and ensures long service life. The servo-driven tapping mechanism operates smoothly and reliably, while the tapping arm allows precise tool positioning. The rotating motor assembly enables thread cutting at different angles, increasing the versatility of the machine. Key construction features of the CORMAK RGE36PWx1200 include: Tapping arm with quick-change tool holder, allowing fast and secure installation of taps. Adjustable overload clutches, providing protection against excessive loads and preventing tool damage. Robust machine construction with a micro-spray lubrication system ensuring effective tool cooling. Standard equipment of the CORMAK RGE36PWx1200 tapping machine Touchscreen control panel: Enables easy programming of tapping parameters such as speed, direction of rotation, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Kodpfx Aieycdcgo Redr Technical specifications of the CORMAK RGE36PWx1200 tapping machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Maximum arm reach 1200 mm Maximum spindle speed 125 rpm Included in the set: Tap holders covering the range from M5 to M36. The machine is supplied without a workbench, vice, and taps.

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine The CORMAK RGE36PWx1700 electric tapping machine is an advanced thread-cutting device designed for both large production facilities and smaller workshops. This tapping machine significantly reduces thread machining time, increasing work efficiency and improving the precision of manufactured threads. It has been developed to provide high reliability, ease of operation, and versatility across a wide range of industrial applications. Main advantages of the CORMAK RGE36PWx1700 Electric Tapping Machine High precision and fast tapping: Thanks to the powerful servo drive and tapping arm, the machine ensures accurate thread cutting in a short time, which is essential for serial production. Easy operation: The machine is equipped with a touchscreen control panel available in Polish and English, allowing simple adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth. High flexibility: The tapping arm enables thread cutting at various angles, while the rotating motor assembly allows precise positioning of the machine for different applications. Efficient cooling system: The micro-spray lubrication system cools the tools with minimal lubricant consumption, extending tool life and reducing material waste. Comprehensive equipment: The tapping machine includes a chip blow-off system, improving visibility of the workpiece and increasing overall work efficiency. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction designed for efficient and precise tapping in various industrial environments. The machine is powered by a servo drive, ensuring reliable operation and accurate control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can perform threading in a wide range of materials, including steel, stainless steel, aluminium, and non-ferrous metals. The tapping arm is equipped with a quick-change tool holder, allowing fast and convenient installation of taps. Adjustable overload clutches integrated into the tap holders provide additional tool protection during operation. This system also allows precise adjustment of torque settings, ensuring accurate and repeatable tapping results. Standard Equipment of the CORMAK RGE36PWx1700 Tapping Machine Touchscreen control panel: Enables easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Kodpfx Aioycdhpo Rjdr Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE36PWx1700 Tapping Machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Maximum arm reach 1700 mm Maximum spindle speed 125 rpm Included in the set: Tap holders covering the range from M5 to M36. The machine is supplied without a workbench, vice, and taps.

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Ksdpfsychbaox Ai Rsdr Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Kdjdpfeycg Ryex Ai Ror Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK RGE30PW Electric Tapping Machine Kedpfxjycdalj Ai Rodr The CORMAK RGE30PW electric tapping machine is an innovative industrial tool that revolutionizes the process of thread cutting in various materials. Using the latest technologies, the RGE30PW enables fast, precise, and efficient tapping in both large production facilities and small workshops. Thanks to the servo drive and modern control system, this machine significantly accelerates the entire tapping process while ensuring exceptional reliability and high-quality threads, making it an essential tool in any production environment. Main advantages of the CORMAK RGE30PW Electric Tapping Machine High efficiency: Equipped with a powerful servo drive, the CORMAK RGE30PW provides fast and accurate tapping, significantly reducing operation time compared with traditional manual methods. Precise thread cutting: The rotating arm and easy adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth guarantee excellent thread quality while maintaining a precise 90° working angle. Wide range of applications: The tapping machine can process various materials, including steel, stainless steel, aluminium, and non-ferrous metals, making it suitable for many industrial sectors. Intuitive control panel: The machine features a modern touchscreen control panel that allows easy programming of operating parameters, with menu languages available in Polish and English. Rotating tapping arm: This function enables easy and precise thread cutting at any angle, significantly increasing flexibility in various applications. Cooling and chip removal system: The integrated micro-spray lubrication system cools the tools, extending their service life, while the chip blow-off system effectively removes chips and improves visibility of the workpiece. Design and Technology The CORMAK RGE30PW electric tapping machine was designed with a focus on efficiency, precision, and durability. It is a robust device providing long-term, trouble-free operation even under intensive working conditions. Key components, including the tapping arm, have been engineered to ensure exceptional stability and accuracy during tapping operations. Standard Equipment of the CORMAK RGE30PW Tapping Machine Touchscreen control panel: Allows easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Enables thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long service life. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE30PW Tapping Machine Parameter Value Power 1.2 kW Power supply 230 V Weight 50 kg Maximum arm reach 1200 mm Maximum spindle speed 200 rpm Included in the set: Tap holders covering the range from M5 to M30. The machine is supplied without a workbench, vice, and taps.

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DG32MD is a professional spiral drill sharpener designed for intensive operation in industrial and workshop environments. The machine enables precise sharpening of HSS and cobalt drills in the diameter range of ø5–ø32 mm, making it a highly versatile tool for production plants, tool rooms, and service facilities. Thanks to the use of a powerful motor, CBN grinding wheels, and an additional drill web thinning socket, the DG32MD model ensures not only high accuracy but also complete regeneration capability for cutting tools. Main advantages of the machine Wide drill diameter range: from ø5 to ø32 mm – ideal for sharpening both small and large cutting tools. Adjustable point angle: 90°–135°, allowing sharpening of most types of twist drills. Two clamping systems (ER20 and ER40): provide secure and rigid drill mounting across the entire diameter range. CBN (borazon) grinding wheels included: designed for sharpening high-speed steel drills, offering high durability and precision. Stable and compact construction: with a weight of 32 kg, it ensures accuracy and vibration-free operation. Complete equipment set: includes collets, holders, and tools – ready for operation without the need for additional purchases. Design and technology Kedpfx Aevu Ac Eji Rodr The CORMAK DG32MD has been designed for intensive use and long service life. The machine features a robust housing resistant to vibrations and a 250 W motor with a speed of 4400 rpm, ensuring smooth operation even when sharpening larger diameter drills. The quick-change ER20 and ER40 holder system allows easy switching between different diameter ranges, while the precise tool guidance eliminates the risk of operator errors. Precision and work efficiency High-quality components ensure that the CORMAK DG32MD drill sharpener provides repeatable and precise sharpening results, even during continuous production work. Applications The CORMAK DG32MD model is suitable for: tool rooms and production plants where fast drill regeneration is required, repair workshops and maintenance departments, service centres, technical and training facilities requiring high sharpening accuracy and repeatability. Standard equipment 2 × CBN grinding wheels – for high-speed steel drills 12 × ER20 collets: ø5–ø14 mm 18 × ER40 collets: ø15–ø32 mm 1 × ER20 clamping holder 1 × ER40 clamping holder Technical specifications Parameter Value Drill diameter range ø5–32 mm Point angle 90°–135° Power 250 W / 230 V Motor speed 4400 rpm Weight approx. 32 kg Dimensions 400 × 260 × 300 mm

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Kdsdpfxsvupr Ts Ai Rsr Axle drives hybrid servo drives

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle Kedevupcrjpfx Ai Rjdr High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: new, Year of construction: 2026, 540×250 Surface Grinder (MYS1022) is a compact machine designed for precision grinding of small and medium-sized metal components. Its robust construction and advanced technologies ensure high machining accuracy and reliable operation in demanding industrial environments. Main advantages of the 540×250 (MYS1022) surface grinder The 540×250 (MYS1022) magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as hydraulic feed in two axes and precision guideways with a solid construction, ensuring reliability and high machining efficiency. Its compact dimensions and high accuracy make it an excellent choice for smaller workshops and production facilities where space is limited. Key benefits include: High grinding precision – maximum grinding area of 540 × 240 mm and transverse feed accuracy of 0.02 mm ensure excellent surface finishing quality. Compact construction – dimensions of 1800 × 1400 × 1800 mm and a weight of 900 kg allow easy installation in smaller production facilities. Smooth hydraulic feed system – two-axis feed system enables precise movements with transverse speed up to 600 mm/min, ensuring efficient machining. Stability and durability – robust construction with double guideways minimizes vibrations, guaranteeing stable operation during intensive use. Easy maintenance – centralized guideway lubrication reduces manual maintenance requirements and increases machine availability. Ready for operation – the machine is fully equipped for immediate production, minimizing setup and downtime. Machine design and technology Robust construction and precision components The MYS1022 surface grinder features a heavy-duty construction weighing approximately 1000 kg, providing excellent stability during machining operations. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishes. The spindle, driven by a 1.5 kW motor, operates with a grinding wheel measuring 200 × 20 × 32 mm, enabling efficient processing of various metal materials. Technical specifications Parameter Value Table dimensions 500 × 250 mm Longitudinal / transverse travel 560 × 260 mm Maximum grinding area 540 × 240 mm Maximum distance from table to spindle centerline 490 mm Table guideways Double guideway Transverse movement per vernier scale division 0.02 mm Transverse movement per handwheel revolution 2.5 mm Vertical movement per vernier scale division 0.01 mm Manual vertical movement per handwheel revolution 1.25 mm Grinding wheel dimensions 200 × 20 × 32 mm Grinding wheel speed 2850 rpm Main motor power 1.5 kW Hydraulic oil tank capacity 80 L Hydraulic pump motor power 1.5 kW Coolant pump motor power 40 W Kdodskkcm Uepfx Ai Rsr Machine dimensions 1800 × 1400 × 1800 mm Weight 1000 kg Standard equipment Magnetic table Grinding wheel Grinding wheel holder Cooling system Chip separator with magnetic filter Halogen lighting system Technical documentation (DTR) CE declaration

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK UWS3 Tool Grinder The CORMAK UWS3 is a compact yet highly functional tool grinder designed for sharpening a wide range of cutting tools. Thanks to precise guidance and versatile head adjustment, the machine is perfectly suited as a drill sharpener, milling cutter grinder, and for the regeneration of lathe tools, electrodes, and centre points. Its stable construction, high-quality spindle, and comprehensive set of holders make it an ideal solution for tool rooms and technical service workshops. Main advantages of the machine Wide range of applications: Sharpening of twist drills, lathe tools, end mills, centre points, and electrodes. Precise adjustment: The grinding head can be positioned in 24 settings, with a cone angle range up to 180°, relief angle adjustment up to 44°, and negative angle adjustment up to 52°. Solid construction: The heavy cast-iron body provides excellent stability and eliminates vibrations during operation. High-precision grinding spindle: Vibration-free operation ensures excellent surface quality and accuracy of sharpened tools. Built-in LED lighting: Improves visibility of the working area when handling precision tools. Corundum and diamond grinding wheels included: Allows sharpening of both steel tools and carbide tools. Design and technology The CORMAK UWS3 tool grinder was designed for long-term and intensive use. Its compact yet rigid construction ensures high precision in every working position. The integrated grinding head can be tilted and rotated in multiple planes, allowing the operator to achieve the required rake, clearance, and conical angles during tool sharpening. The micro-adjustment system of the tool holder and spindle enables extremely accurate positioning of the tool in relation to the grinding wheel, ensuring repeatable and precise results. Precision and efficiency Thanks to the use of high-quality components and vibration-free operation, the CORMAK UWS3 drill and milling cutter grinder provides repeatable sharpening results and significantly extends the service life of cutting tools. The ability to install various types of holders and the wide adjustment range allow the machine to be adapted to specific machining tasks, including small production batches and regeneration of special-purpose tools. Applications The UWS3 model is ideal for: tool rooms and locksmith workshops, maintenance departments in industrial plants, small production facilities with in-house tool regeneration, technical schools and training workshops for learning tool sharpening techniques. Standard equipment Corundum cup grinding wheel Diamond cup grinding wheel Grinding wheel flange Collets: 4, 6, 8, 10, 12 mm Drill holder Milling cutter holder Lathe tool holder LED lighting Technical specifications Parameter Value Grinding wheel diameter 100 mm Grinding wheel thickness 50 mm Kodpfx Aov E Ek Hsi Rsdr Grinding wheel bore diameter 20 mm Spindle speed 5200 rpm Maximum/minimum collet diameter 3–16 mm Cone angle 0°–180° Negative angle 0°–52° Relief angle 0°–44° Longitudinal holder movement 140 mm Holder micro-adjustment 18 mm Spindle micro-adjustment 6 mm Motor power 0.25 kW / 230 V Weight 45 kg Dimensions 450 × 350 × 340 mm

Condition: new, Year of construction: 2026, CORMAK LBM290 PRO Horizontal Wood Boring Machine – Precision and Versatility for Professional Woodworking The CORMAK LBM290 PRO is a precise and multifunctional horizontal wood boring machine designed for intensive operation in woodworking shops, furniture production facilities, and manufacturing plants. Thanks to its stable construction and extensive standard equipment, the machine ensures maximum efficiency and repeatability of drilling operations, even in the most demanding projects. Main advantages of the machine Mortising attachment – enables precise production of rectangular holes and slots. Double-sided tilting of the working unit – allows drilling at any angle within a range of 0–45°. Four-position spindle head – enables quick changing of drill diameters: 16, 20, 22, and 25 mm. Two end stops – ensure repeatability and accuracy during series production. Left/right spindle rotation – increases drilling versatility and allows adaptation to different types of tools. Kjdpfx Aiovuq Hlj Rodr Easy one-hand operation – an ergonomic lever provides fast and comfortable control of the drilling cycle. Construction and technology The CORMAK LBM290 PRO horizontal boring machine is built on a heavy-duty grey cast iron base, which effectively absorbs vibrations and minimizes machining errors. The integrated extendable worktable (600 × 300 mm) allows convenient processing of larger workpieces. Drilling height and width adjustments are carried out using precise adjustment knobs and guide systems, ensuring smooth and accurate movement of the working unit. The machine is equipped with a professional Westcott drill chuck (0–20 mm) and a complete set of holders for square chisels. Precision and work efficiency The machine reaches spindle speeds of 1400/2800 rpm, while the maximum drilling depth is 155 mm. A stable and quiet 4.2 kW (S6) motor provides consistent performance even during long operating cycles. Horizontal wood boring machines such as the LBM290 PRO are designed for continuous industrial operation – both for individual production and large series of drilling operations for dowels, hinges, and frame joints. Applications The CORMAK LBM290 PRO horizontal boring machine is designed for: professional woodworking and furniture production facilities, manufacturers of furniture fronts and frame components, workshops specializing in furniture restoration, woodworking technical training centers. Standard equipment Mortising attachment + 1 square chisel 9.5 mm Four-position spindle head 16/20/22/25 mm Westcott drill chuck 0–20 mm Extendable and widened worktable 2 eccentric clamps Angle stop with measuring scale 4 holders for hollow chisels (shank sizes 19/20/28/30 mm) Base with tool storage compartment Left/right spindle rotation Technical specifications Parameter Value Table dimensions 570 × 300 mm Table extension 600 × 300 mm Drilling table height 870 mm Drilling depth 155 mm Drilling width adjustment 300 mm Height adjustment 160 mm Spindle speed 1400 / 2800 rpm Motor power (S6) 4.2 kW Power supply 400 V Two-jaw chuck 0–20 mm Dimensions 570 × 850 × 1340 mm Weight 140 kg

Condition: new, Year of construction: 2026, Universal Metal Lathe CORMAK 410 × 1500 mm The CORMAK 410 × 1500 universal conventional metal lathe is a professional machine designed for precision machining of shafts, bushings, threads, cylindrical surfaces, and tapered surfaces. Thanks to its large distance between centers, rigid bed construction, and extended standard equipment package — including a 20 × 20 mm indexable turning tool set and a precision MT4 live center — it provides a complete machining solution for industrial plants and professional workshops. Main Advantages of the Machine Large 1500 mm distance between centers – enables machining of long shafts and large-length components. Rigid cast iron bed and base construction – hardened and ground working surfaces minimize vibration and ensure high machining accuracy. Large 52 mm spindle bore – allows machining of pipes and workpieces with larger diameters. Precision spindle bearing system – reinforced spindle support guarantees long-term accuracy and reliable operation. Removable bed gap section – enables machining of components with diameters up to 580 mm. 3-axis digital readout system – optical scales provide accurate control of carriage positioning. 16 spindle speed ranges – allows precise cutting parameter selection within a range of 45–1800 RPM. Direct thread selection system – enables machining of a wide range of metric, imperial, module, and DP threads without changing gears. Standard Equipment Set of turning tools 20 × 20 mm – 7 pcs. (with indexable inserts) Precision live center MT4 6 vibration isolators 3-axis digital readout system (optical scales) 3-jaw chuck 200 mm with complete set of jaws 4-jaw independent chuck 250 mm Faceplate 350 mm Fixed and follow steady rests Fixed center MT4 Spindle reducing sleeve MK6/MK4 Complete set of change gears Coolant system with pump Work lighting Lubricator, keys, and service tools Safety guards compliant with CE standards Kdedorh E Smopfx Ai Rer Operating manual and CE Declaration of Conformity Technical Specifications Parameter Value 3-jaw chuck 200 mm Maximum turning diameter over bed 410 mm Maximum turning diameter over cross slide 255 mm Maximum turning diameter in bed gap 580 mm Bed gap length 190 mm Distance between centers 1500 mm Center height 205 mm Compound slide travel 145 mm Cross slide travel 225 mm Longitudinal carriage travel 1150 mm Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MT6 Tool post dimensions 100 × 100 × 32 mm Maximum tool size 20 × 20 mm Spindle speeds 16 ranges, 45–1800 RPM Available spindle speeds 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 RPM Metric threads 42 ranges, 0.2–14 mm/rev Imperial threads 42 ranges, 2–72 TPI Module threads 18 ranges, 0.3–3.5 mm DP threads 21 ranges, 8–44 DP Longitudinal feeds 17 ranges, 0.05–1.7 mm/rev Cross feeds 17 ranges, 0.025–0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill travel 120 mm Tailstock taper MT4 Main motor power (S1/S6) 2.2/2.64 kW or 3.3/3.96 kW Coolant pump power 0.1 / 0.12 kW Machine dimensions (L × W × H) 2440 × 900 × 1660 mm Net weight 1800 kg

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Kjdof Eyqqopfx Ai Rjdr Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Kdjdsy Shzaopfx Ai Rer Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Ksdpfoudi Uzox Ai Rsdr Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector