Used Cormak Vertical Bandsaw With Laser Guide for sale (13,927)

Condition: new, Year of construction: 2026, Vertical Bandsaw with Laser Guide A simple-to-use bandsaw with a durable construction. It allows for precise adjustment of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quickly removing the blade. Precise cast iron machine table. Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Two cutting speeds selected via a stepped pulley. Technical Data: Wheel diameter [mm]: 480 Maximum cutting height [mm]: 280 Maximum cutting width [mm]: 465 Blade width [mm]: 9.5 to 38.1 Blade length [mm]: 3605 Belt speed (2 speeds) [m/s]: 7/14 Worktable angle adjustment [°]: from -10 to +45 Worktable dimensions (L x W) [mm]: 630 x 480 Dimensions (L x W x H) [mm]: 830 x 550 x 2070 Bljdpfx Afevugwas Rsh Weight [kg]: 162 Motor power [kW]: s1-2.2kW, s6-3.1kW Power supply: 3-phase, 400V Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2026, The CORMAK HBS421 wood band saw is designed in a vertical configuration, allowing convenient material guidance across the table and enabling both straight and curved cuts. In production environments, rigidity is crucial—therefore, the body and main structural components ensure stable wheel alignment and, consequently, smooth and accurate blade tracking. Drive Wheels and Blade Guidance In professional band saws, cutting quality largely depends on the geometry of the blade guidance system. Properly selected drive wheels ensure correct blade operation along its entire length, reduce slippage, and limit localized overloads. In practice, this results in: Reduced vibration at higher feed rates Improved edge quality—especially in harder wood species Extended blade life thanks to stable operation and correct tension Worktable and Angle Adjustment Bljdjyk Apnjpfx Af Rjh The worktable provides material support and cutting repeatability. In the CORMAK HBS421 wood band saw, both stability and adjustment capability are essential, allowing for angled cuts. This solution is particularly valued in carpentry workshops where quick transitions between different operations (sizing, structural component preparation, trimming) are required. Drive System and Continuous Operation The band saw drive system is designed for load-intensive operation, while the three-phase power supply enhances smooth running and torque stability. As a result, this vertical wood band saw maintains cutting performance even when processing thicker materials—an important factor in serial production. Adjustable blade speeds allow optimization for specific tasks, reducing edge burning and improving cutting control. Dust Extraction and Workstation Ergonomics Cutting wood generates significant amounts of dust and chips. The integrated dust extraction port enables connection to an extraction system, which significantly improves: Work safety (reduced airborne dust) Visibility of the cutting line Service life of working components by limiting dust accumulation Precision and Productivity In industrial practice, it is not only the ability to cut material that matters, but also maintaining repeatability. The rigid construction, stable blade guidance, and controlled blade tension ensure straight cuts and reduce the need for corrections in subsequent processes (planing, sanding, fitting). As a result, the CORMAK vertical wood band saw supports shorter production cycles and minimizes material waste. Standard Equipment High-voltage release switch Dust extraction port 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Optional Equipment 100 mm extraction hose Galvanized clamp Mobile base (up to 260 kg capacity) Technical Specifications Wheel diameter [mm]: 480 Maximum cutting height [mm]: 240 Maximum cutting width [mm]: 405 Blade width [mm]: 9.5 – 38.1 Blade length [mm]: 3345 Blade speed [m/s]: 7 / 14 Table tilt range [°]: 0 to +45 Table dimensions [mm]: 535 × 435 Overall dimensions [mm]: 830 × 550 × 2070 Weight [kg]: 160 Motor power: S1 – 2.2 kW / S6 – 3.1 kW Power supply: 3-phase, 400 V Manual (DTR): Yes CE Declaration: Yes

Condition: new, Year of construction: 2026, The CORMAK HBS321 vertical wood band saw operates in a vertical configuration, providing the operator with full control over guiding the material across the worktable. A key component is its rigid frame, which maintains the geometry of the wheel and guide system. This ensures smooth blade tracking and consistent cutting accuracy. In practice, this means a lower risk of blade drift—particularly important when cutting harder wood species or working at greater cutting heights. 350 mm Wheels and Blade Tracking Control Cast Iron Worktable and Angle Adjustments The band saw features a 545 × 400 mm worktable, providing adequate support for workpieces—essential for precise straight and angled cuts. The table tilt range of 0–45° allows for bevel cuts without the need for additional attachments. The cast iron construction effectively dampens vibrations, helping maintain stable operating parameters. Drive System and Operating Parameters This woodworking band saw is equipped with a motor rated at 1.1 kW (total power), ensuring stable performance for typical carpentry tasks such as ripping, trimming, preparing components for gluing and assembly, and contour cutting. The use of blades with widths ranging from 6–15 mm allows the operator to select the appropriate blade depending on the task—from precise curved cuts to stable straight-line cutting. Laser – Enhanced Control and Reduced Material Waste The integrated laser guide supports quick material alignment and accurate cut tracking. In practice, this reduces the need for test cuts, minimizes material waste, and makes working with detailed elements (e.g., profiled components or shaped cutouts) easier and more efficient. Precision and Work Efficiency In professional applications, repeatability is just as important as cutting capability. The rigid construction, stable table, and quick blade adjustment system reduce machine setup time and limit the need for corrections during subsequent processing stages (planing, sanding, fitting). As a result, the CORMAK HBS321 band saw supports smooth workflow and improves overall process efficiency. Applications The HBS321 wood band saw is designed for a wide range of woodworking and wood-based material applications, including: Cutting boards, squared timber, beams, and glued elements Trimming furniture and carpentry components Angle cutting (using the tilting table) Cutting shapes and profiled elements Blsdpoyk Aliefx Af Rjh Workshop use in carpentry shops, craft businesses, and training facilities Technical Specifications Wheel diameter [mm]: 350 Maximum cutting height [mm]: 175 Maximum cutting width [mm]: 300 Worktable dimensions (L × W) [mm]: 500 × 400 Table tilt [°]: 0 to +45 Blade width [mm]: 6 to 15 Blade length [mm]: 2240 Blade speed [m/s]: 6 / 12 Overall dimensions (L × W × H) [mm]: 750 × 650 × 1730 Gross weight [kg]: 88 Motor power [kW]: S1 – 0.75 kW / S6 – 1.1 kW Power supply [V]: 230 Manual (DTR): Yes CE Declaration: Yes Standard Equipment On/off switch with low-voltage release Quick blade tension/release lever Precision rip fence Cutting blade 2560 × 10 TPI 6.3

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal Bljdpfx Aewz Ukyjf Rjh

Condition: new, Year of construction: 2026, Universal metal lathe CORMAK 330x700 with base, 230V is equipped with 12-speed gearbox with induction motor (constant speed) 1.1 kW/230V - maximum torque. Recommended for turning hard steels, mechanical turning. It can be used for many tasks, such as internal and external surface turning, taper turning, polishing, metric and inch threading, drilling and broaching. Semi-professional model, used for single and low-volume production. Machine version with base. Machine description: Durable and stable construction, the bed is made of high quality cast iron. 12-speed gearbox with induction motor provides optimal rolling mode without loss of maximum torque. Induction hardened and precision ground bed guides. Appropriate bed width of 160 mm ensures stable and precise working conditions. Spindle shaft mounted by two angular contact bearings. 38 mm spindle bore for optimal work results, allowing the machining of large diameter shafts. Spindle motor induction (constant speed) 1.1 kW/230V drive with high power and high torque, optimal for machining steel, non-ferrous materials. Handwheel carriage with precise 0.5/0.1 mm scale (transverse/longitudinal feed). The tool slide with a scale, rotates in the range of ± 45°, and the tailstock has a sliding system of ± 10 mm for turning cones. Easy adjustment of spindle speed and automatic feed from the ergonomic control panel to the gears. Hardened and ground wheels toothed in the spindle gearbox. Large threading range (Right and Left hand threading): Metric - (17) 0.5-4mm, Inch - (26) 9-40 TPI. With lead screw for threading or automatic longitudinal feed. Automatic Longitudinal Feed (2) 0.105 - 1.396 mm/rev, and Traverse (2) (0.022-0.296) mm/rev - reduces machining time and improves quality when turning long parts. The machine is fully compliantwith the requirements of EU directives (CE) and Polish regulations and DIN standards. with the requirements of EU directives (CE) and Polish regulations and DIN standards. Technical parameters 3-jaw chuck 160mm Max. turning diameter over bed 330mm Max. turning diameter over carriage 220mm Max. detail length in centers 700mm Max. length of the installed part 650mm Bed width 160mm Spindle bore 38mm Spindle taper MK5 Dimensions of lathe post 75 x 75 x 20mm Top slide range 100 (0.05) mm Traverse range 150 (0.1)mm Longitudinal shift range 620(0.5)mm Spindle speeds (12) 65, 90, 120, 160, 220, 300, 380, 500, 640, 850, 1100, 1650 rpm /min Number and range of metric threads (17) 0.5-4mm Number and range of inch threads (26) 9-40 TPI Longitudinal autofeed speed 0.105-1.396 mm/rev Auto traverse speeds 0.022-0.296mm/rev Tailstock liner diameter 40mm Trail distance of the tailstock liner 70 (0.025)mm Taper of Tailstock MK2 Engine power 1.1kW / 230V Dimensions L/W/H (with base) 1500 x 730 x 1200mm Weight (with stand) 320 kg Equipment: Lathe base 3-jaw chuck 160 mm Jaws left Fixed Tooth: MK3 Bodpfjmtyi Nox Af Rolh Change wheels Lubricator Handle and holder wrench A set of maintenance tools CE safety guards Manual in Polish CE Declaration of Conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1991, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, HEMA SR500 Bandsaw – Industrial Quality Made in Germany Technical Specifications Manufacturer: HEMA Model: SR500 Machine type: Vertical bandsaw Wheel diameter: 500 mm Motor power: approx. 2.2 kW Voltage: 400 V Blade length: approx. 4,080 mm Tilting table Upper and lower blade guides Precision, low-vibration industrial design Description For sale is a HEMA SR500 bandsaw constructed for demanding industrial applications. This machine is ideally suited for precise cutting operations in wood, plastics, and similar materials. Thanks to its stable build and high-quality blade guides, the bandsaw delivers exceptionally smooth operation and precise cutting results. The HEMA SR500 is ideal for joineries, carpentry shops, training workshops, or demanding trade businesses. The tilting work table offers flexible use for both straight and curved cuts. The machine is offered in used condition with age-appropriate signs of wear, but is technically fully functional. Equipment Robust work table Precision blade guides Safety cover 400 V three-phase connection Numerous spare blades included Heavy-duty industrial quality "Made in Germany" Bledoy Sgc Nspfx Af Roh Machine dimensions: Height: approx. 2,000 mm Width: approx. 950 mm Depth: approx. 700 mm Weight: approx. 250 kg

Condition: used, machine/vehicle number: 12304, functionality: fully functional, actuation type: electric, Equipment: rotational speed infinitely variable, For sale is a high-quality and robust industrial bandsaw, manufacturer THIEL SEGURA 117. The machine is produced by Gebrüder THIEL GmbH, Sand near Kassel, and impresses with its solid construction and classic German industrial quality. Technical data (according to nameplate): Model: THIEL SEGURA 117 Machine ID: 12304 Machine Specifications Wheel diameter: 300 mm Throat: 450–500 mm Max. workpiece height: 220 mm Table size: 600 × 600 mm Tilting table: yes, partially in 2 directions Saw blade length: 3350 mm Saw blade width: approx. 10 mm Blade speed: 15 – 125 m/min or 125 – 1000 m/min partially infinitely variable Weight: approx. 700 kg Dimensions: approx. 1.0 × 0.7 × 1.8 m Equipment: -integrated bandsaw blade welder (IDEAL BS00) -grinding stone for deburring the weld seam Bodpfxsy Sf Ude Af Relh -infinite speed control All technical data without guarantee.

Condition: new, Year of construction: 2026, Vertical Bandsaw - Industrial Machine Bjdpfx Ajvugtnof Rslh A proven industrial machine! Successfully sold throughout Europe. A heavy-duty, professional, easy-to-use bandsaw with a durable construction. It allows for precise setting of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quick removal of the blade. A precise cast iron machine table with a ground and polished surface. Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Technical Data: Wheel diameter [mm]: 680 Maximum cutting height [mm]: 430 Maximum cutting width [mm]: 700 Worktable dimensions (L x W) [mm]: 790 x 500 Worktable tilt [°]: -5 - 45 Blade width [mm]: 19 - 40 Blade length [mm]: 5020 Belt speed [m/s]: 18 Dimensions (L x W x H) [mm]: 1090 x 700 x 2430 Weight [kg]: 308 Motor power (S1/S6) [kW]: 4.0 / 5.6 Dust extraction ports [mm]: 2 x 100 Power supply: 3-phase, 400V Note: The price quoted is the net price. It does not include transportation costs.

Year of construction: 2016, condition: like new (used), functionality: fully functional, For sale the vertical laser engraving machine CERION LASER GmbH ( GERMANY ) for glass , mirror and acrylic Blsdpfx Afeyzc Rbe Rjh Type: C-vertica Year: 2016 excellent working condition, as NEW ! 3D engraving systems, and image editing software ! The c-vertica enables the processing of glass surfaces with unique structures and motifs, and the laser engraving of two-and three-dimensional designs inside and onto glass with just one machine.

Condition: used, Vertical band saw HESKA type ESA 4 make no. 681174 year of construction approx. 1985 roll diameter 420 mm throat 400 mm Blsdpfx Afedzqrvo Roh table size 500 x 500 mm cutting height 285 mm saw band length min. 3200 - max. 3400 mm Saw band speed gear stage (1) 15-140 m/min. Saw band speed gear stage (2) 150-1400 m/min. Motor power 1,5 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via PIV gear with hand wheel adjustment and 2 gear steps - saw table tiltable in 2 axes - machine light space requirement L x W x H 950 x 750 x 1820 mm weight approx. 500 kg good condition

Condition: used, Vertical band saw JAESPA type MSU 4 make no. 724749 year of construction approx. 1980 roll diameter 420 mm throat 400 mm table size 610 x 610 mm cutting height 260 mm saw band length min. 3200 - max. 3400 mm saw band speed 10-1500 m/min. infinitely variable mains connection 400 Volt, 50 Hz - infinitely variable saw band speed via 2 gear steps and infinitely variable via belt drive - saw table tiltable - Saw blade butt welding machine IDEAL BS0-16 - saw blade shear Bledpfx Afsd Nbk Te Reh - Grinding stone for grinding the weld seam space requirement L x W x H 1000 x 850 x 1850 mm weight 400 kg good condition

Condition: used, Vertical band saw MÖSSNER REKORD type SM 420 Machine No. 17010 Year of construction 1968 roll diameter 420 mm throat width 415 mm throat in height 265 mm table size 605 x 600 mm band speed 18 - 562 m/min. 8 steps saw band length min/max. 3150 / 3260 mm drive power 1,1 / 1,7 kW Bledpfx Afjdzqc Rj Rjh Mains connection 380 V 50 Hz - Saw band speed via 4 gear steps and 2 motor speeds - saw blade butt welding unit IDEAL BS 0-16 with shear and grinding stone - swivelling working table in 2 axes space requirement L x W x H 950 x 750 x 1900 mm weight 570 kg good condition

Condition: good (used), Roll diameter 483 mm Cut range Horizontal 457 mm Vertical 508 mm Cutting length 356 mm Misc. Accessories Bedpfxju R Ryus Af Rslh MARCELS MASCHINEN AG

Condition: excellent (used), functionality: fully functional, power: 1.47 kW (2.00 HP), input voltage: 200 V, cutting height (max.): 1,000 mm, empty load weight: 740 kg, throat depth: 1,000 mm, Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Bledowr Nlyopfx Af Rsh Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min Bedpfxow I Scfe Af Rjlh - Infinitely adjustable cutting pressure: 10 – 15 bar - Feed rate: 0 – 300 mm/min - Cutting range at 90° – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 Bodpfx Afexvrnis Rjlh with operator control system in the cabin, Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm. Bandsaw blade length 11,500 mm Round timber infeed approx. 20 m long, four strands with inserter Block carriage with ejector onto block transverse conveyor CANALI pneumatic log carriage Type 501.09 with 4 clamping claws, 3 log turners, 4 ejectors Drive power 100 kW, carriage speed 5-120 m/min. driven roller conveyor with side board removal with brush, lifter with stripper for cut-out removal Roller conveyor approx. 12 m with lifting stripper for manual stacking Stacking device with turning unit for bundle packaging Lowerable bundle with transverse bundle conveyor Complete electrical control cabinets Full band saw blade sharpening equipment

Condition: new, Sales from STOCK! Model: AMWP11.2-8100 Max. Working Height: 11.2 m Max. Platform Height: 9.2 m Max. Horizontal Reach: 3 m Up and Over Height: 7.89 m Guardrail Height: 1.1 m Overall Length: 2.53 m Overall Width: 1.0 m Overall Height (Stowed): 1.99 m Platform Dimension: 0.62 x 0.87 m Ground Clearance (Stowed): 70 mm Ground Clearance (Raised): 19 mm Wheelbase: 1.22 m Loading Capacity: 200 kg Occupants: 2 Turning Radius (Inside/Outside): 0.23 / 1.65 m Turret Rotation: 345° Jib Movement: 130° Travel Speed (Stowed): 4.5 km/h Travel Speed (Raised): 0.5 km/h Up/Down Speed: 42/38 seconds Max. Working Slope: X: 2.5° / Y: 2.5° Tyres: Ø 381 x 127 mm Driving Motor: 24 V / 0.9 kW Lifting Motor: 24 V / 3.3 kW Battery: 24 V / 240 Ah Charger: 24 V / 30 A Weight: 2950 kg AC Driving Motor Bodpeulakkjfx Af Relh Proportional Joystick Controls Self-Locking Gate Drivable At Full Height Non-Marking Tyres 4 x 2 Drive Automatic Braking System Emergency Descent System Tubing Explosion-Proof System Fault Diagnosis System Tilt Sensor Alarm Motion Alarm 345° Turret Rotation Horn Hour Meter Charging Protection System Flashing Beacon Drive Enable Charging Indicator Manual Brake Release Lanyard Attachment Point Tie-Down And Lifting Points Platform Load Sense System Emergency Stop Button Swing Out Components Cover

Condition: used, REF: MM6436 Chinese 4-head filler with gating system and touch-screen controls. Bjdpfxsza T I Hj Af Relh Valves capable of hot filling. Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Will need guarding to meet CE spec.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 x Laser s.r.l. rotary biscuit moulding machine, used to deposit biscuits onto 18'' x 30'' baking trays. NEVER USED IN PRODUCTION. Model - RM-50-ST. Serial number - RMST.1774.06. Date of manufacture - 2006 (never used). Production speed - 4 to 14 pans / minute. Production capacity - 100 to 350 kg / hour. Overall dimensions - 2600mm long x 960mm wide x 1400mm high. Weight - 540 kg. Electrical requirements - 380 V / 50 hz / 3 phase. Supplied with approx. 90 x trays and fitted with a brand new belt. Blsdpoymzz Isfx Af Rsh

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed and fly cutting movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. IDEAL for precision parts, thin sheets and small-medium size workpieces: ( up till 20 mm thickness steel ) • Auto-focus laser head and Automatic edge detection; • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Bjdpfx Afox Rn Tmo Relh Movable operating panel with arm and LCD display Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR series, is the most modern solutions used in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee efficient and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created for the most demanding applications. Innovative design: Our compressors are based on advanced engineering and European precision of workmanship. Solid construction, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 15 kW Voltage 400V/50Hz Efficiency 0-6 bar 2100 l/min Efficiency at 6 bar 2000 l/min Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Outlet 3/4" Dimensions 1080 x 750 x 1000 mm Weight 460 kg Bjdpfeklz Syex Af Rolh Manufacturer: Cormak

Condition: new, Year of construction: 2026, Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or small production line? The CORMAK LUFT 700 screw compressor is the perfect choice. With a 5.5 kW motor and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air required for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. This model is designed for continuous operation, making it ideal for demanding applications such as tire service centers, smaller automotive workshops, and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter and more stable operation. The LUFT 700 features a direct-drive system, providing significantly higher efficiency and lower power losses compared to belt-driven models. This innovative solution guarantees optimal utilization of motor power, resulting in higher performance with lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and process control. Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, designed for the most demanding applications. The combination of the proven reliability of an induction motor with intelligent control makes this screw compressor an extremely efficient, economical, and flexible source of compressed air, perfectly suited to the dynamic needs of modern industry. Blsdpeza Aptofx Af Roh High-quality CORMAK screw compressors, such as the LUFT 700 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven engineering solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to withstand even the most intensive operating conditions. In CORMAK screw compressors, such as the LUFT 700, a key component ensuring reliability and optimized operation is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 5.5 kW Power supply: 400V / 50Hz Air delivery at 0–6 bar: 690 L/min Air delivery at 6 bar: 650 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 630 L/min Outlet connection (G): 1/2" Dimensions: 1445 × 610 × 1410 mm Weight: 200 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK screw compressors are a guarantee of quality and reliability. Our many years of experience in compressor sales have enabled us to develop models that offer an excellent price-to-performance ratio. This model is ideally suited for small workshops and small manufacturing companies. It features high air delivery (380 l/min) relative to its compact dimensions, allowing several devices to operate simultaneously. Its very low noise level (60 dB) makes working in the same room comfortable and unobtrusive. Are you looking for an efficient and reliable compressor for smaller workshops, service points, or hobby applications, while requiring a single-phase power supply? The CORMAK LUFT 400 screw compressor is the perfect solution. With a 3.0 kW motor and an impressive actual air delivery of up to 400 l/min, it provides a constant supply of compressed air necessary for the efficient operation of impact wrenches, blow guns, spray painting equipment, and other pneumatic tools. The LUFT 400 features a reliable and robust direct-drive transmission system, eliminating vibrations and the need for belt drive adjustments. This proven solution ensures stable operation and a long service life by providing direct power transfer from the motor to the screw airend. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by the intuitive MAM-series electronic control panel, giving access to key compressor information and increasing operational flexibility and process control. Permanent Magnet Motors (PM Motors) represent an innovative approach to electric drive technology, offering a number of significant advantages over traditional induction motors. An inverter (also known as a variable frequency drive, VFD) is an advanced electronic device that revolutionizes the operation of screw compressors. Its use allows smooth adjustment of the compressor motor speed according to the current demand for compressed air. High-quality CORMAK screw compressors, such as the LUFT 400 model, are based on technologically advanced screw airends that determine their efficiency and reliability. By combining proven solutions with innovation, CORMAK ensures that every airend is refined down to the smallest detail to meet the demands of even the most intensive operation. In CORMAK screw compressors, such as the LUFT 400, a key element ensuring reliability and work optimization is the advanced MAM-series control panel. Designed for efficient compressed air system management, this controller enables continuous monitoring and rapid response to all operating parameters. TECHNICAL SPECIFICATIONS Motor power: 3.0 kW / 4 HP Bledpfoza Al Usx Af Rsh Power supply: 230V / 50Hz Air delivery at 0–6 bar: average 400 L/min Air delivery at 6 bar: 390 L/min Air delivery at 8 bar: 380 L/min Air delivery at 10 bar: 380 L/min Outlet connection (G): 1/2" Dimensions: 1130 × 520 × 1300 mm Weight: 170 kg

Condition: excellent (used), Brüel & Kjaer LDS Dactron Laser USB LAS 200 Type: LAS 200 LDS Dactron Vibration Testing and Shaker Control System including Acer laptop with installed software Bledpfxsy T Iv Ho Af Rsh For sale is a used LDS Dactron LASER USB Shaker Control System, Type LAS 200. The system was last used in an industrial vibration testing facility and is suitable for electrodynamic shaker systems, vibration tests, resonance tests, random tests, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjær Type: LASER USB Model: LAS 200 Made in U.S.A. Software / Functions Installed software: Shaker Control Version 8.1001 Library Version 6.3120 Activated modules according to software display: Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Further activated options: Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Technical Data 8 active input channels 2 output channels Sampling Rate: 96 kHz A/D Resolution: 24 Bit USB Mode: 2.0 Input Type: Volt / ICP / TEDS Suitable for electrodynamic vibration testing systems and industrial shaker systems. Calibration Calibration data according to system display: Last calibration: 09/20/2023 Displayed due date: 09/19/2024 Dimensions / Weight Controller approx.: 430 x 350 x 90 mm (W x D x H) Controller weight: approx. 6 - 8 kg Scope of supply LDS Dactron LASER USB Controller Acer laptop with installed software Connection cables / accessories as shown in the pictures Condition Used equipment from industrial use. Optical condition see pictures. Normal signs of wear and tear and storage. System starts, software can be opened and the hardware has been recognized. No further tests were performed. Notes Sale exclusively to commercial customers. No guarantee or warranty. Subject to prior sale, errors and changes. We will be happy to answer any further questions by telephone or message.

Condition: new, Year of construction: 2026, CORMAK LUP7TS WOOD SPLITTER is an electric log splitter with a 7-ton splitting force, designed for preparing firewood and fuel wood. The model handles logs up to 520 mm in length and up to 250 mm in diameter, making it well suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation, a safety cage protecting the working area, and a stand with wheels included in the set. Check the CORMAK LUP7TS if you need a compact 230 V wood splitter for regular firewood preparation at home. Applications of the CORMAK LUP7TS wood splitter The CORMAK LUP7TS wood splitter is suitable wherever firewood is prepared regularly, but there is no need for a large industrial machine or a version with a stand. Recommended applications: households farms homes heated with wood fireplace and stove users small firewood preparation points agritourism facilities and guesthouses workshops and utility areas Bsdjzarv Aspfx Af Relh users preparing seasoned and fresh wood The LUP7TS model is suitable for people who want to prepare firewood faster and more conveniently, reducing the effort of manual splitting. Who is the 7-ton wood splitter for? The CORMAK LUP7TS is a splitter for users who need a compact, easy-to-use device for firewood. The 7-ton splitting force, 230 V power supply, and compact design without a stand make it suitable for home use, farms, or small service points. It is a good choice for: homeowners heating with wood fireplace users farms preparing their own fuel people wanting to reduce manual splitting small businesses and facilities regularly using firewood users looking for easier storage than stand-mounted versions The CORMAK LUP7TS is equipped with a two-hand control system, which increases control over the splitting process. The operator uses both hands, reducing the risk of accidental contact with the working area. An additional safety feature is a protective cover for the working area. This is especially important when the splitter is used regularly and the operator wants a safer and more controlled working environment. Smooth adjustment of splitting gap The splitter has a smooth adjustment of the splitting gap, allowing better adaptation to the length of the wood being processed. This helps reduce unnecessary movement and speeds up the preparation of logs. This is particularly useful when working with repetitive pieces of wood, e.g. for fireplaces, stoves, or boilers. Standard equipment CORMAK LUP7TS hydraulic wood splitter Stand with wheels Hydraulic cylinder with automatic return Two-hand control system Protective cover for working area Log output table Stable splitting blade 230 V / 2200 W motor Powder-coated steel construction Technical parameters of CORMAK LUP7TS: Splitting force: 7 T Max. log diameter: 250 mm Max. log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power supply: 230 V Length: 950 mm Width: 325 mm Height: 510 mm Net / gross weight: 63 / 68 kg Warranty: 2 years