Used Crank Winch for sale (1,751)

Condition: good (used), Crank winch, Dunkraft, Karohebebock, steel winch Njdpfx Aot H Trdsa Rsda -Manufacturer: VEB, steel winch with ratchet safety crank type 10.10 -Load capacity: 10 t -Lifting height: 330 mm -Dimensions: 300/210/H685 mm -Weight: 35 kg

Year of construction: 1988, condition: used, Crank winch, Dunkraft, diamond jack, steel winch -Manufacturer: Pfaff, steel winch type 0104000 Ndodpehgm D Hjfx Aa Rea -Load capacity: 1.5 t -Lifting height: 0.35 m -Number: 4x winch available -Price per piece -Dimension: 740/120/140 mm -Weight: 10.3 kg / pc.

Condition: good (used), Crank winch, Dunkraft, Karohebebock, steel winch -Loading capacity: 10 t -Safety crank -self-locking gearbox -with profiled head claw -with firm claw Nsdpeb A I Hnjfx Aa Roda -Weight: 50 kg

Condition: new, functionality: fully functional, empty load weight: 851 kg, maximum load weight: 2,649 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 6,040 mm, loading space width: 2,150 mm, tire size: 195 / 50 R 13C, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Unideck Plus 600/3 S 3.5T NEW VEHICLE Internal dimensions: 604cm x 215cm Total weight: 3500kg Payload: 2649kg Braked 3-axle trailer Overrun brake and handbrake from KNOTT or AL-KO 3x 1350kg axles and brakes with automatic reverse function Suitable for transporting longer vehicles Low chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail shaft Numerous lashing eyes along the entire length Reinforced 13" C tires with steel valve M+S tires 13-pin connector Nedpezvcb Hefx Aa Rjda Side marker lights at the front Side marker lights Rear lights with reversing light, NSL (non-sequential turn signals), and triangular reflectors Cable winch with brake and bracket 2x wheel chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION STARTING IN FEBRUARY 2026 -Equipment for 100 km/h (shock absorbers) -Spare wheel with holder -Complete LED lighting -Theft protection -Replacement of steel rail with aluminum rail -Wheel stops -Folding crank rear supports -Anti-sway coupling -Filling of the center strip with screen-printed wood or aluminum tread plate Further accessories available upon request! Plus freight to Gera and vehicle registration certificate: €315 net Images are for illustrative purposes and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravan trailers. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come by directly!

Condition: new, functionality: fully functional, empty load weight: 683 kg, maximum load weight: 2,017 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,535 mm, loading space width: 2,150 mm, tire size: 195 / 50 R 13C, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Unideck Plus 450/2 S 2.7T NEW VEHICLE Internal dimensions: 453cm x 215cm Total weight: 2700kg Payload: 2017kg Braked 2-axle trailer Overrun brake and parking brake from KNOTT or AL-KO 2x 1350kg axles and brake with automatic reverse function Suitable for transporting longer vehicles Low chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail channel Numerous tie-down points along the entire length Reinforced 13" C tires with steel valve M+S tires 13-pole plug Side marker lights Rear lights with reversing light and triangular reflectors Winch with brake and bracket 2x wheel chocks Ndedpozvb N Nefx Aa Rsa OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with bracket -Complete LED lighting -Anti-theft device -Replacement of steel rail with aluminum rail -Wheel stops -Folding crank-operated rear supports -Anti-sway coupling Further accessories available upon request! Plus shipping to Gera and vehicle registration document €250 net Images are examples and may show accessories that are subject to an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come by directly!

Condition: new, functionality: fully functional, empty load weight: 583 kg, maximum load weight: 2,117 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,110 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Plateau 400/2 2.7T NEW VEHICLE Internal dimensions: 406 cm x 211 cm Gross weight: 2,700 kg Payload: 2,117 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350 kg axles and brakes with automatic reverse function Low-profile chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail compartment Support load Multiple tie-down lashing points along the entire length Reinforced 10" C-grade tires with steel valve M+S (mud and snow) tires 13-pin connector Front marker lights Rear lamps with reversing light, fog light, and triangular reflectors Lamps and license plate holder are foldable Winch with brake and bracket 2 x wheel chocks 15 mm thick, durable, anti-slip phenolic plywood floor OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Full LED lighting - Anti-theft device - Swap steel track for aluminum track - Swap 10" tires for 13" tires - Wheel stops - Foldable rear support cranks - Anti-sway coupling - Side railing - 30 cm aluminum side panels - 30 cm aluminum extension side panels - 150 cm high tarpaulin - Full-width wheel stop Additional accessories available on request! Plus freight to Gera and vehicle registration certificate: €250 net Images are for illustration purposes and may show optional accessories at extra cost. Haven’t found the right trailer yet? Nedpfoxp U A Aox Aa Roda We have 50–100 vehicles in stock, available immediately for pickup. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. We also offer a large selection of spare parts and accessories for trailers from various manufacturers. We also have a wide range of rental trailers available. Visit us online or stop by in person!

Condition: new, * IMMEDIATELY AVAILABLE * including hand winch – suitable for drums up to d=280cm and b=160cm TECHNICAL DATA • Brand: Blyss • Model: KTT 27 • Vehicle type: Cable drum trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV / General inspection: 2 years from first registration • Internal dimensions (LxWxH): 280 x 160 x 0 cm • External dimensions (LxWxH): 470 x 234 x 218 cm Ndodpfx Aaeyachij Rea • Loading height of platform: 0 cm • Permissible total weight: 3,500 kg • Unladen weight: 711 kg • Payload: 2,789 kg • Chassis: low-loader (wheels positioned beside the platform) • Tyres: 185R14C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable drums up to a diameter of 2,800 mm and a width of 1,600 mm • Standard pipe receptacle • Torsion-resistant chassis with robust mounting frame, fully hot-dip galvanized • Easy handling of the mounting frame with or without cable drum • Barrier-free insertion of the cable drum • Play-free bearing and secure fixing of the drum • Heavy-duty jockey wheel mounting and rear support • Sturdy telescopic crank supports, rear and front • Includes robust, maintenance-free manual hand winch • Highly stable welded steel frame • Complete frame hot-dip galvanized • Plastic mudguards • Automatic reversing system • KNOTT overrun hitch and parking brake • 13-pin plug • Reversing light • Large dimensioned safety lighting • Integrated rear fog lamp • LED lighting fitted flush in rear frame • Number plate bracket 340x200mm New vehicle with warranty and TÜV (inspection). ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be shipped in advance, or we can provide temporary (German) registration plates. - Export plates with customs declaration available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been a specialist dealer and workshop for over 30 years representing Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, changes and prior sale -

Year of construction: 2003, operating hours: 20 h, condition: excellent (used), WAREHOUSE CLEARANCE: 13 units of very well-maintained SMAG Mobile Masts AG BIGSTAF FMT 26/6 mobile masts, 25 m, mounted on trailers, manufactured in 2003, ORIGINAL PRICE €350,000, we offer a 97% DISCOUNT. Manufacturer: SMAG Mobile Masts AG Model: BIGSTAF FMT 26/6 Year of Manufacture: 2003 Condition: very good Extension height: 25.0 m Njdpezrlf Tefx Aa Rsda Aluminum telescopic mast FTM SALZGITTERWERKE, 25 to 42 m light and rugged mobile mast - Simplest and fastest installation - Manually or electrically erectable - Infinitely adjustable extension - Can be set up on terrain with up to +/-10% slope - 2000 N (2 m2) wind load without bracing (up to 10,000 N possible with bracing) - At least 170 kg top load - Highest precision, also for microwave applications - On trailer with 70 mm eye or, optionally, with 40 mm civil ROCKINGER eye - Dimensions of the segments approx. 5 m, height of trailer 265 cm, width 2.40 m - Can be set up on terrain with up to +/-10% slope - Winch operation can be manual with a crank or electric with 2 units of 12 V batteries, min. 35 Ah, connection cable approx. 15 m, included in the scope of delivery - Requires 24V 60A supplied by 2 car batteries (not included) - As a mobile structure, no building permit is required (depending on the federal state) - Original price approx. €230,000, years of manufacture between 1985 and 1990 - The offer is valid only for commercial buyers - Price tested, functioning and in good condition with a maximum of 20 hours of use.

Condition: new, * IMMEDIATELY AVAILABLE * Including Electric Winch / Removable Container / For Drums up to d=280 cm and b=165 cm TECHNICAL DATA • Brand: Blyss • Model: KTT 35 V2L • Vehicle type: Cable Drum Trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 280 x 165 x 280 cm • External dimensions (LxWxH): 489 x 254 x 214 cm • Loading height (floor): 0 cm • Perm. gross weight: 3,500 kg • Unladen weight: 675 kg • Payload: 2,825 kg • Chassis: Low loader (wheels beside the superstructure) • Tyres: 185R14C • Suspension: KNOTT rubber spring axle • Jockey wheel: Yes • 100 km/h type approval: Optional, retrofittable DESCRIPTION • Designed for cable drums up to a diameter of 2,800 mm and a width of 1,650 mm • With 2m³ container for cable drum trailer • Standard pipe mount approx. 60 mm • 2x plastic adapters for pipes with 80 mm mount • Torsion-resistant chassis with heavy-duty mounting frame, hot-dip galvanized in immersion bath • Easy operation of the mounting frame with or without cable drum • Barrier-free loading of the cable drum and container mounting • Play-free bearing and secure fixing of the drum • Electric winch for loading cable drums • Battery installed in box • Heavy-duty jockey wheel mount and rear support • Stable telescopic crank stands at rear • Very robust welded steel frame • Frame completely hot-dip galvanized • Steel mudguards • Reverse automatic system • KNOTT overrun device and parking brake • 13-pin plug • Reversing lights • Large-dimension safety lighting • Integrated rear fog light • Rear frame with recessed LED lighting • Automatic jockey wheel • ____ • Container data: • Width bottom 116 cm, • Width top 133 cm, Ndsdpfx Ajyachpoa Rsa • Length bottom 87 cm, • Length top 182 cm • Height of container 100 cm • Container weight: approx. 260 kg • Trough colour: blue RAL 5002 • Pivoting tailgate, suitable for driving over and removable • Tailgate can also be used as a drive-on ramp, e.g. for wheelbarrows • Additional net hooks for tarpaulin or nets ensure optimal load securing • Container capacity approx. 2 m³ New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration documents can be sent in advance or temporary licence plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been specialist dealers and service workshops for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, omissions and prior sale excepted -

Condition: used, maximum load weight: 35,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck in SNT design to optimize the length of the loading area, approximately 3,700 mm long. The rear of the gooseneck has a bevel of approximately 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. Suitable for SZM (special heavy-duty vehicles): 4 x 2 and 6 x 2 axle configurations. Loading Platform: Telescoping loading platform, approximately 9,600 mm long, with a rear bevel of approximately 900 mm x 6°. The loading platform can be hydraulically raised and lowered after the gooseneck, with a length of approximately 3,000 mm. Load capacity up to approximately 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS. A pair of two-part AXS steel ramps with a length of approximately 4,920 mm and a width of approximately 900 mm. Open grid flooring. Hydraulically folding ramp ends. The ramps can be individually moved outwards approximately 235 mm and inwards approximately 365 mm hydraulically. Maximum load and approach angle according to technical data sheet: C470319. Maximum angle of inclination with the loading platform lowered: approximately 9°. Axles and Suspension: BPW axles and suspension. The 1st and 2nd axles are fixed, and the 3rd axle is steered. Technical axle load: 12,000 kg. Electro-magnetic reverse lock, activated via reverse gear and manually. Air suspension with lifting and lowering valve. Axle tool. Braking System: Braking system from WABCO EBS-E, in accordance with EU regulations. No connection cable to the tractor unit. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer of our choice. Load index 143/141J (144/144F). Paint Finish: 6-coat finish: Complete steel construction blasted with shot after welding. 1 coat of zinc-based primer, 1 coat of adhesive primer. Topcoat with 2 coats of 2-component paint (acrylic), in a single color: RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra charge. Included Accessories: - ASPÖCK-UNIBOX on the connection strip at the front, with 24N, 24S & 15-pin sockets. - 24N connection according to ISO-1185 - 24S connection according to ISO-3731 - 15-pin connection according to ISO-12098 - 3 kW electric-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - Parking position on the gooseneck for warning signs when not in use. Nodpfezkx Hbjx Aa Rjda - Outboard supports on the gooseneck with mounting holes for screw-on lashing rings. - The first hole is approximately 200 mm from the front, then approximately every 400 mm. - One mounting hole in the rear upper area of the outboard supports of the gooseneck for a screw-on lashing ring. - 1 pair of screw-in lashing rings included (LC 10,000 daN). - 3 pairs of recessed lashing rings inside the outboard support of the gooseneck (LC 5,000 daN). - 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN). - 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). - Grid flooring with approximately 5 mm sheet metal reinforcement on the gooseneck and rear bevel. - 2-inch Kingpin - Guide plate on the gooseneck for the fifth-wheel plate, approximately 500 mm wide. - Mechanical fifth-wheel supports with 2-speed gearbox and crank. - JOST Module B - static test load = 50,000 kg - Continuous grid flooring with 5 mm sheet metal as additional reinforcement, designed for point load: - Locking of the loading platform with conically welded locking profile

Condition: used, Year of construction: 1950, machine/vehicle number: 26284, functionality: unexamined, power: 1.6 kW (2.18 HP), pressing force: 30 t, overall weight: 1,100 kg, We offer this used Raskin 30TRG crank press, year of construction 1950. Nodpfx Aaeza En So Rjda Machine has not been used for 30+ years and was sitting in a corner of the workshop under a tarp. Now it must go. Untested and condition unknown, but was working when put aside, and externally looks in working order. Included is the punching tooling visible on the pictures (on the pallet + cardboard box).

Condition: used, mileage: 419,200 km, power: 175 kW (237.93 HP), first registration: 06/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 3,780 mm, Year of construction: 2013, Equipment: air conditioning, parking heater, tail-lift, * Mercedes Benz 1824 L AXOR with box body 7.90 m & BÄR tail lift 2 t * Diesel – Displacement: 6,374 cc – 175 kW / 240 hp – Euro 5 – Green environmental badge * Body dimensions: Length 7.90 m x Width 2.60 m x Height 2.50 m – Wheelbase: 4,900 mm * 2 seats – Automatic transmission – Air conditioning – Suspension: leaf/air – Axle configuration: 4x2 * Retarder – Permissible gross weight: 18,000 kg – Curb weight: 10,550 kg – Payload: 7,450 kg * Truck 1: 1824 L – First registration – mileage: 400,500 km – VIN: WDB 9505361L652633 * Truck 2: 1824 L – First registration – mileage: 513,750 km – VIN: WDB 9505361L752647 * Truck 3: 1824 L – First registration – mileage: 422,750 km – VIN: WDB 9505361L756551 * Truck 4: 1824 L – First registration – mileage: 419,250 km – VIN: WDB 9505361B980262 * Vehicles available immediately and ready for collection – Vehicles are not branded * Further images available on request or will be provided after the Easter holidays * We also have 4 Mercedes Benz Axor 1824 refrigerated box trucks from registration years 2012/2013/2014 * Please arrange a viewing appointment – Price is per vehicle * Contact: Mr. Andreas Vogel * The information given online constitutes a non-binding description. * They do not represent guaranteed characteristics. * The seller is not liable for typing or data transmission errors. Nedpfx Asy Ng Imoa Roda * Subject to changes, errors, and prior sale. Special Equipment: Wheel bolt covers, engine tunnel storage, tow hitch: towing coupling, audio system: CD radio, 220 Ah battery, aluminium air reservoir, cab: comfort suspension (1.8 HZ), cab version: S (short cab with rear wall extension), 100 A alternator, graphic info display with econo-meter, tail lights for tail lift mounting, heated air dryer single chamber, side-mounted spare wheel winch, tail lift switch, circuit breaker, driver’s seat: comfort air-suspended seat including horizontal suspension, voltage converter 24V/12V 15A, steel rims 9.00x22.5, 12V socket, 24V socket in cab, front underrun protection, pre-installation for cool box/fridge, preparation for telephone/fax, cranked front axle, heat-insulating glass, auxiliary heater (air) Further Features: Emission standard EURO 5, axle configuration: 4x2, front axle load 7.5 t, electrically adjustable and heated external mirrors, electrically adjustable mirror, left, outside temperature display, long-distance cab cockpit, steel roof hatch, rear axle differential lock, cab: S (short), suspension: leaf/air, electric window lifters, 6-speed transmission – type: G 85-6, urea tank (AdBlue): 95 litres, rear axle H 6, crown wheel 440, interior filter: pollen filter, body/chassis: chassis, fuel tank: 210 litre plastic, Axor 2 model update, engine 6.4 L – 175 kW diesel (OM 906 LA), engine start/stop system, constant throttle engine brake, spare wheel under end of frame, disc brakes, passenger seat: rigid single seat, rear axle stabiliser, front axle stabiliser, Telligent braking system with ABS+ASR, fixed rear underrun protection, immobiliser, permissible gross weight 18 t

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply. Ndodpfx Aasv E Rm He Rja

Condition: used, functionality: unexamined, Year of construction: 2015, 2015 Krpan 8.5 EH Forestry winch 8.5 tonne pulling power Njdpozvww Aofx Aa Rjda

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin Ndodoyhkquepfx Aa Rsa - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) Ndjdpexarmaofx Aa Rea * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013965, empty load weight: 7,180 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Please note: the images shown are archive photos for illustration only! 2 units available #Chassis / Tractor Semi-Trailer Additional splash guard panel riveted to the underside of the floor, in the neck area above the tractor unit's rear axle and above the wheels; reinforced frame for loads extending to the outer frame, outer frame fitted with "Load-Lock" profile at approx. 400 mm intervals 10 pairs of mushroom-head lashing points recessed into the top/outer edge of the outer frame, 10 t each 24 t twin-speed landing legs, single-side operation, with semi-round foot and straight base plate, with thrust compensation Telescopic rear support legs Hook rail for leaning-type loading ramps across the full width of the rear pull-out Mechanical rear pull-out with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm, incl. extendable rear underrun protection with lighting Storage compartment for loading ramps integrated in the rear pull-out, usable only when the rear pull-out is extended by approx. 1,000 mm 1 pair of ramps, 3,000 mm long, 300 mm wide, load capacity 6,000 kg per pair Electric winch, 24 Volt, pulling force approx. 8,165 kg, mounted centrally at the front, operated by wireless remote control Ndjdpfx Aszu Aqxoa Rsa #Axles & Suspension Axles/chassis laser-aligned – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically operable from the towing vehicle, incl. forced lowering and traction assist SAF or BPW drum brake axles, manufacturer's choice #Wheels & Tyres 235/75 R 17.5" make at manufacturer's discretion Steel wheels in twin arrangement, factory silver #Electrics 24 Volt, LED multi-chamber lamps, yellow LED side marker lights, LED number plate light 2 white LED front position lamps 2 white/red LED rear outline marker lamps on flexible mounting arms 2x 7-pin and 1x 15-pin fool-proof connector sockets at the front, without connecting cable 2 additional LED work lamps at the rear 1 beacon light with bracket 2 pairs of warning panels, dual LED-illuminated and extendable to 3,000 mm, removable via plug connector Additional 7-pin socket (to ISO 1724) in the rear underrun protection LED work lamps on the sides, 1x each on the left and right #Floor Chequered aluminium floor (Lohrblech type) of welded construction; rear pull-out walkway area fitted with chequer plate, centre section in steel chequer plate #Country of Registration / Plates Germany With DEKRA inspection and certification (pursuant to §13 EC-FGV) 24/7 service hotline Prepared for single-row number plate holder Contour marking with reflective tape to ECE R048, yellow on the sides and yellow at the rear Warning panel to ECE-70 Combination type approval report for applying for a §70 permit for a towing vehicle, on collection from the Triptis plant (please note the maximum permissible gross train weight in the tractor's registration documents; apply for an uprating beforehand if required – this is at the manufacturer's discretion and is not guaranteed; any resulting costs will be invoiced separately) 1 to 3 "Angles Morts" blind-spot stickers (as required by regulation and technical feasibility) #Paintwork Frame hot-dip galvanised incl. passivation 15-year warranty against corrosion perforation Support/landing legs feet black coated 2 units available

Condition: like new (used), machine/vehicle number: 122, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 r 22,5, wheelbase: 1,310 mm, Equipment: ABS, Dimensions: Internal length approx. 5,100 mm Internal width approx. 2,420 mm Ndedpfek Ttc Sox Aa Rea Overall width max. 2,550 mm Unladen loading height approx. 1,510 mm Frame: Central axle steel frame welded structure in lightweight construction with optimized weight with tilting supports and rear tilting axle; Plug-in locking system for tipper body with cross-locking Tow hitch: Curved drawbar with height-adjustable heavy-duty screw coupling eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support system: At the front, 1 mechanical support winch with crank handle on the left in the direction of travel, manufacturer according to factory specifications, 1 step-up bracket bolted on Axles: BPW-EcoDrum axles with drum brakes, S-cam brake 420/180 mm, Load capacity 9 t/axle, off-road version, automatic brake linkage adjuster 2 axles Axle spacing 1,310 mm Without axle lift Wheels: 4 tires 385/65 R 22.5, 160K, manufacturer according to factory specifications (road profile) 4 steel rims 11.75 x 22.5, without offset, silver Without spare tire and spare rim(s) Braking system/suspension: Braking system according to EC directives 71/320 or ECE R13 Two-line pneumatic braking system Braking system manufacturer Knorr EBS system 2S2M, 2nd axle sensed RSS - stability program Spring accumulator parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additionally lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems: Axle load indicator via EBS-CAN bus signal for display via display in the driver's cab Tipper body: Steel welded structure Fixed steel sheet front wall 4 mm, approx. 980 mm high 2 step-up brackets inside and 1 outside on the front wall Fine-grain special steel floor sheet 5 mm (Slight floor waviness due to welding distortion possible) 5 pairs of pivoting lashing rings 5 t (width between the lashing rings approx. 2,320 mm) 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, foldable with extended pivoting lock and spring-assisted lifting, and additionally pivotable Side walls left and right with manual central locking 2 rear corner pillars at the height of the side walls, fixed on the side Steel sheet rear wall 4 mm (HB400), approx. 980 mm high, pivotable with recessed bearing, hooks for dosing chains (on the rear wall and underside of the body) Rear wall locking = automatic pneumatic closure 2 dosing chains for the pivotable rear wall With sealing strips Hydraulics: 1-line system with hydraulic connection hose including plug-in coupling SVK DN13 Tipper press for 3-way tipping, initial lifting force approx. 30 t; 1 safety cable Tarpaulin: Plastic roll tarpaulin incl. aluminum tube and hand crank, side wall overhang approx. 400 mm, without customs closure, in the direction of travel on the right horizontal Tarpaulin bow rope lashing, zigzag lashing at the front and rear; Stop bracket and locking for rolled-up roll tarpaulin in the direction of travel on the right; Holder for hand crank Tarpaulin fastening in the direction of travel on the left with 2 lashing straps with Rubber pads and tensioning locks on the body

Condition: used, mileage: 8,000 km, power: 390 kW (530.25 HP), first registration: 12/2018, fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, Manufacturer Mercedes Model Arocs 4153 8x4 MPG 220 TM7 Winch Year 2018 Condition Very good Nedpfxezlxaqj Aa Rjda Serial Number WDB96403810274993 Ref. nr. 538158 Reg. date: Last seen: 26-09-2025 Hk: 530 Km: 8000 Gearbox: Automatic Eurotype: 6 Diesel tank: 1 Tank liter: 500 Air conditioning: ? Number of beds: 1 Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 385/65 - 315/80 - 315/80 Cover% left 60 - 60 - 80 - 80 % Front suspension: Springs Suspension rear: Air Wheelbase: 6400 mm Hydraulic system: ? Total weight: 37000 Kg Net weight: 35600 Kg Crane Manufacturer: MPG 220 TM 7 Tonsmeter: 220 Remote control: ? Year: 2018 Extension extension (hydraulic): 7 Max range (hydraulic): 25 m

Condition: used, Year of construction: 2018, N = tilting brake motor with 5 kW. Saw blade diameter 520 mm, bore 50 mm. Cutting height 200 mm. Cutting length 420 mm. Saw blade tilted to 45°: cutting height 140 mm. With machine stand and hand crank for tilt adjustment. Hydraulic feed brake for ZS 200 and ZS 200N; a coolant emulsion is used as the hydraulic medium. 5-meter long infeed roller conveyor mounted on the right: RO-ST60, 5.0 m long. Mounting side: right. Heavy-duty design, steel rollers with a diameter of 60 mm, roller spacing 200 mm, roller width 400 mm, 4 support feet, and connecting piece. 5-meter long measuring length roller conveyor mounted on the left: RLH-ST60, 5.0 m long. Mounting side: left. Length stop/roller conveyor, heavy-duty design, stop slide adjustable from the workstation via a handwheel, electronic-digital dimension display, stop slide pneumatically lockable, stop flap foldable to the rear, with steel rollers with a diameter of 60 mm, roller spacing 200 mm, roller width 400 mm, with 4 support feet and connecting piece. Overall length: 5.7 m. Location: Nattheim. Nodpezwm Ndjfx Aa Rjda

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVKSK339SZ542526, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,350 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65R22,5*, color: grey, Year of construction: 2025, The images are archive images; the vehicle may still be in use. Frame: Steel frame welded construction with rear tilting axle in lightweight design optimized for weight. Replaceable 2" kingpin. Frame for fifth wheel height unloaded approx. 1200 mm - approx. 1250 mm with air-sprung axle. Support system: Mechanical steel support winches, 2 x 12 t, single-sided operation on the right. Axles: SAF Intradisc-B9 axles with disc brakes / 430. 3 axles. Front axle automatically liftable = raises and lowers depending on the load; additionally with forced lowering including integrated speed-limited starting aid. Note: Loading height or overall height increases by approx. 50 mm! Electrical system: With 15-pole socket: PIN 12. With 7-pole socket: PIN 6 (positive-controlled). Wheels: 6 tires 385/65 R22.5", 6 aluminum rims. Braking system / Suspension: Two-line pressure braking system. Braking system manufacturer: Knorr. EBS system. RSS/RSP - Brake/air connections with 2 single coupling heads, yellow / red. EBS/ABS socket at the front. Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the semi-trailer. Without lifting and lowering device. Ndodpfszm Ipksx Aa Rsa Without connection hoses or cables to the towing vehicle. Assistance/Safety Systems: Axle load indicator via EBS-CAN bus signal for display on the display in the cab. Tire pressure monitoring with pressure sensor in the wheels, for display on the display in the cab. Tipping body: Steel tipping body with reinforced floor plate made of special steel HB 450 (Hardox or comparable material), as well as reinforced top rail. Floor thickness 5mm = continuous floor plate, wall thickness 4mm. Front and rear walls sloping, flush at the top. Climbing steps in the tipping body, inside front left. Steel swing wall with recessed mounting and automatic-mechanical 2-hook central locking, rear wall inside with discharge chute. Hydraulics: Without hydraulic connection lines to the axle. High-pressure front press for rear tipping. Tarpaulin: Plastic roll tarp including aluminum tube and hand crank, without customs seal. 1 removable transverse support and on the right side a bracket for the roll tarp; Locking mechanism for rolled-up roll tarp. Tarpaulin fastening in the direction of travel on the left with 3 retaining brackets and a central tensioning device at the front, without tensioning straps (quick release on the top rail). Tarpaulin color similar to RAL 9006 white aluminum. Lighting / Electrical system: 24-volt lighting system. 2 multi-chamber rear lights with full LED technology. 2 LED position lights at the front. 2 LED outline lights at the rear. Flashing LED side marker lights. 2 LED license plate lights. 2 x 7-pole sockets. 1 x 15-pole socket. Without electrical connection lines to the axle. Painting: Steel shot blasting. Chassis: RAL 7021 Black Gray. Tipping body and rear wall painted = RAL 7001 Silver Gray. Tipping body top rail in tipping body color = RAL 7001 Silver Gray. Accessories / General: 3 pairs of plastic single wheel mudguards, without splash guard, at the rear with fold-up splash flaps. Aluminum trapezoidal underrun protection, foldable, unpainted with steel bracket, according to EU directive. 2 chock blocks. 1 towing hook screwed onto the frame carrier in the direction of travel on the right. Noise damper = rubber pads. Accessories / Components: Steel standing platform with aluminum safety grating with protective railing and foldable

Condition: used, briquette diameter: 50 mm, overall weight: 2,000 kg, Crank-driven briquetting press BL250-50 Ndsdpfezt H Swjx Aa Rja briquettes with a diameter of 5 cm Output: 250 kg/hour.

Condition: new, Year of construction: 2026, machine/vehicle number: ZS170N mit ES-F3, functionality: fully functional, power: 3 kW (4.08 HP), cutting height (max.): 170 mm, cutting width (max.): 410 mm, saw blade diameter: 420 mm, tilt adjustment saw blade: 45 °, saw blade bore: 40 mm, actuation type: manual, total length: 6,400 mm, total width: 1,200 mm, total height: 1,550 mm, table height: 920 mm, Equipment: CE marking, Mobile saw carriage, overall length 6400 mm, with a Graule SZ170N saw mounted on it. Stop roller track with folding stop and scale on the left side, 3100 mm, measuring length on the folding stop 3050 mm + attached extension with stop and scale for a measuring length up to 5000 mm. Feed roller track on the right side, track length 3000 mm. Track width on the left and right sides is 500 mm. Crosscut and miter circular saw ZS170 N, cutting height at 90° is 170 mm, at 45° inclination is 115 mm. Cutting length is 410. Machine can be tilted on both sides using a hand crank, up to 45° to the left and up to 60° to the right. Machine with carbide-tipped circular saw blade for wood, 420x4.0x40 mm, 48 teeth. Ndjdpfx Aaszwn T Rs Roa

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg Ndsdpetx Nwnjfx Aa Roa * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: new, functionality: fully functional, empty load weight: 1,005 kg, maximum load weight: 2,495 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 8,530 mm, loading space width: 2,150 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT 850 3 S 3.5T NEW VEHICLE Internal dimensions: 853cm x 215cm Total weight: 3500kg Payload: 2495kg Braked 3-axle trailer Overrun brake and parking brake by KNOTT 3x 1350kg axles and brakes with reverse automatic function Suitable for transporting longer or multiple vehicles Low chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail channel Rear supports Numerous lashing eyes along the entire length Reinforced 10" C tires with steel valve M+S tires 13-pin connector Side marker lights at the front Side marker lights Rear lights with reversing light, NSL (night signal light), and triangular reflectors Winch with brake and bracket 2x wheel chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION STARTING FEBRUARY 2026 - Equipment for 100 km/h (shock absorbers) - Spare wheel with holder - Complete LED lighting - Anti-theft device - Replacement of steel rail with aluminum rail - Center strip with aluminum tread plate - Replacement of 10" tires with 13" tires - Wheel stops - Folding crank rear supports - Anti-sway coupling - Wheel stops across the entire width Further accessories available upon request! Nedpozl Akgjfx Aa Roda Plus freight to Gera and vehicle registration document: €400 net Images are for illustrative purposes only and may show optional accessories that incur an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, also for caravans. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come directly to our location!