Used Cross Wrap Oy Ltd Bale Opener for sale (17,977)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Dwsdpfxezp H R Ee Akhja Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: ready for operation (used), Two Temafa bale opener lines are offered for bale opening, pneumatic conveying of fiber bales and processing of natural and synthetic fibers. 1. Bale opener: 1) Bale opener BÖ-KSP 0347, working width: 1600mm. 2) Rod conveyor table FTRY 0502, length: 5700mm, width: 1600mm. 3) Material extraction hopper, working width: 1600mm, pipe flange: 350mm. 4) AEG extraction fan, type: AM 160 MR 4, power: 11kW, speed: 1450rpm. 2. Bale opener: 1) Bale opener BÖ-KSP with Cleanmaster, working width: 1300mm. 2) Rod conveyor table, length: 5000mm, width: 1260mm. 3) Material diverter for feeding into the CMA or for direct discharge. 4) Cleanmaster (CMA) with infeed, tumbler and time-controlled discharge flap. 5) TV 300 extraction fan and auxiliary extraction fan for cleaning the CMA and for wool room extraction. 6) Control cabinet, year of manufacture: 1999, control system: Siemens S5 with Lauer terminal. Documentation available. The machines are available from April 2027. The machines can be purchased separately. An on-site inspection is possible. Dwjdpfxeznx Nks Akhsa

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies. Dwedpfxeulc Sqs Akhoa

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Dwsdovw I Niepfx Akhea Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Condition: used, Year of construction: 2013, _____Sale on behalf of customer:V Kuhn VBP 2160 Round BalerYear of manufacture: 201316,257 bales23 knives3D wrapperThe machine underwent a complete overhaul last winter:- new rotor,- new cutting floor,- new endless belts (original Kuhn),- pickup newly bearing-mounted,- tyres in good condition,- no maintenance backlog.The baler is in absolutely top condition and ready for immediate use without hesitation.We are selling the baler-wrapper combination due to a planned new purchase.Sale only after inspection.No warranty or guarantee.Storage location: not specified Djdpeylrtfjfx Akhowa

Condition: new, Year of construction: 2023, _____Bale dimensions: 1.20 x 1.00 - 1.50 m Maximum bale weight: 1,100 kg Overall length: 4.55 meters Overall height: 2.51 meters Loading system: Side loading arm with clamping device Wrapping table: 4 belts Bale guide rollers on the wrapping table: 2 x adjustable Djdpfx Akeki Einehowa Film end sensor, wrapping process stops when film runs out or film tears VT 30 terminal Fully automatic film cutter 1 EW (single-acting) and 1 pressure-free return or 1 DWS (double-acting) Special equipment: Magazine for 4 film rolls Storage location: null

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 0013, type of input current: three-phase, input voltage: 380 V, working height: 1,000 mm, total width: 885 mm, total length: 930 mm, total height: 1,630 mm, overall weight: 545 kg, insertion depth: 380 mm, Huen Chen HC-13TR4E Quadruple Automatic Riveting/Eyeleting Machine Heavy-duty automatic quadruple eyeleting machine, designed for the production of lever arch files and binders. The machine sets four eyelets/rivets simultaneously in one working cycle. The material is positioned manually against the adjustable guides. Operation is activated by two microswitches on the working table, so no foot pedal is required. Dedox Nfhlspfx Akhowa Pre-punching of the material is not necessary. The machine punches and sets the eyelets in one operation. Technical details: * Manufacturer: Huen Chen Enterprise Co. Ltd., Taiwan * Model: HC-13TR4E * Year: 1993 * Quadruple eyeleting/riveting system * Fixed spindle / eyelet spacing * Throat depth: 380 mm * Working height: approx. 1,000 mm * Motor: 1 HP * Power supply: 380 V, 3-phase, 50 Hz * Machine dimensions: approx. 930 × 885 × 1,630 mm * Net weight: approx. 545 kg * Intermittent motor operation * Two-microswitch workpiece activation The machine is complete with the installed tooling and a quantity of matching eyelets/rivets as shown in the photographs. The machine is in good used and fully functional condition and can be inspected while running at our warehouse in Son en Breugel, the Netherlands. IMPORTANTLY; this model is still part of Huen Chen's current product lineup!

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Dedpfozrmigjx Akhewa Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Dwedjzru Rfopfx Akhoa Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: used, machine/vehicle number: MC939B03, overall weight: 5,800 kg, input voltage: 400 V, type of input current: three-phase, Vertical Machining Center. Manufacturer: Falcon Machine Tools Co., Ltd. (Chevalier, Taiwan) Model: 2040VMC Serial Number: MC939B03 Type: CNC Vertical Machining Center Machine Weight: 5,800 kg Maximum Spindle Speed: 8,000 rpm Power Supply: 400 V Dsdpfx Asztba Njkhswa Required Power: 15 kVA Air Pressure Required: 5 kg/cm²

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Dwodpozma E Dsfx Akhea Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Condition: used, Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Dwodpfx Ajzn Uqdekhea Manufacturer: Automation Assistant Oy Type: LG2750 Date of manufacture: 07/01 Machine type: Linear Guided Free Fall Tester For sale is a used Automation Assistant Oy LG2750 Linear Guided Free Fall Tester. This linear guided free fall test stand was designed for reproducible drop and impact tests and is suitable for quality assurance, research, development, and industrial testing applications. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: concrete garden paving stone 300 × 300 × 50 mm Frame: aluminum profile Protective panels: polycarbonate / XT-acrylic Other materials: aluminum, steel and POM Dimensions: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Weight of test tower: approx. 155 kg Weight of impact table: approx. 55 kg Total weight: approx. 210 kg Equipment: Touchscreen control panel Closed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Transport data: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Transport weight: approx. 210 kg Condition: Used The unit was last used in an industrial setting. Optical condition as shown in the pictures. Scope of supply: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Dwjdpfx Asy Uni Nskhsa Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Year of construction: 2025, condition: used, Pall Emflon PFR 30” Filter - 1 of 19 available Unused and in Original Packaging Expiry date 23rd Feb 2026 hence the price Dedpsxv Azyjfx Akhjwa Overview & Purpose - The Emflon® PFR / PFRW filter cartridges from Pall are sterilizing‑grade hydrophobic PTFE membrane filters designed for air and gas (vent & compressed gas) sterilization applications. +2 - They are used to provide a sterile barrier by removing microorganisms (bacteria, phages) and particulates from gas streams that contact sensitive process equipment or product. +2 - The filters are designed for repeated use, in situ steam sterilization, and validation / integrity testing

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Dsdpfx Akoynnlishswa Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Year of construction: 2005, condition: good (used), Finnish-made, automatic film wrapping machine with infeed and outfeed conveyors, and strapping for securing the package to a wooden pallet. Dwsdpfxsy Uagmj Akhea

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Dwodpfx Aey Hlvwskhsa Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Dsdpfjy Hlkbjx Akhowa Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Year of construction: 2012, condition: good (used), Unit comes complete with suction lift Maximum load capacity: 150 kg Width: 650 mm Height: 2000 mm Depth: 1100 mm Weight: approx. 25 kg Condition: good, second-hand Dsdjzmyrdspfx Akhowa

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Model: HYR-650-2 Serial number: 2024126 Year of manufacture: 12/2024 Condition: very good (used) Functionality: fully functional Dwjdezmul Sjpfx Akhja Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.). Dwsdpfxszbkl Sj Akhoa

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit Dedpfx Akjznwu Sjhjwa - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: ready for operation (used), Quin Systems PTSM322 Mini Machine Manager, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dwedpfxsi Ecl De Akhea

Condition: excellent (used), REF: MM6174 1 x Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Height - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts. Dedpfjw E Ey Tex Akhowa

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Dwedpfxowpunbe Akhea Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.