Used Cup Drainer - Drainer for sale (1,128)

Year of construction: 1995, condition: like new (used), The bucket drainer is the perfect machine for the recovery of 0-4 sand, with low energy consumption and little maintenance. Njdpfxou Avrts Ag Dewf - Flow rate: 50 cubic meters/h - Motor 5.5 Kw.

Condition: used, Year of construction: 2006, functionality: fully functional, overall weight: 75 kg, Pad printing machine Nwedpfx Agoywx H De Def

Condition: used, Year of construction: 2006, functionality: fully functional, overall weight: 75 kg, Pad printing machine Nwjdpoywx Dpsfx Ag Def

Condition: used, Year of construction: 2010, This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator . Capacity: 2000 cps/hr Filling Type: Piston Filler Filling Volumes : 500-1000 gr Controls: Siemens HMI Cup disinfection: Peroxide Film Disinfection: UV Cup Diameter: 120 mm Film application: Heat sealing and cutting off roll Nwodpfx Aoyr Nlfjg Def Over cap: Plastic lid after sealing

Year of construction: 1999, condition: used, The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. Cup Diameter: 95 mm Outside diameter Filling Range: 50-500 grams Capacity: 4800 cups/Hour Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor Guarding: Fully Enclosed Cabin Control Panle: Simple Push button Controls Air Requirements: 6 Bar Pressure Nsdpfxsxyh R Ue Ag Dowf Electrical Requirements: 400 v / 3 phase / 50 -60 hz Filling Type: Piston Volumetric Filling Hopper: Included Condition: Good Condition Serviced

Year of construction: 2006, condition: used, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. 4 suction pads, each with a diameter of 140 mm Nwsdpsy Hf Itsfx Ag Dsf Connection: 400V 16A Good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only

Condition: good (used), Item: AJ-Hamba BK6005/5 Filling machine for cups HAMBA BK 6005/5 cup filling and sealing machine Made in Germany In good used condition. The machine can be used for filling yogurt and similar products in cups. Capacity: 8000 - 10000 cups/ h Lanes: 5-Lanes longitudinal machine Actual Cup-size: Ø 75 mm Height: 90 mm Nsdoi Atkqspfx Ag Dewf Main Filler: - manufacturer: Hamba - filling range: 100 cm³ to 250 cm³; - cleaning: CIP-able Closure: Sealing Date Device: Stamp Measurements (lxwxh): 4,3 m x 1,3 m x 2,2 m Power: 380 V; 21 A; 8 KW

Condition: ready for operation (used), Rotary cup filling and sealing machine R version (electronic cam control) Approx. 2,500 cups per hour Filling volume: 10 ml - 1,200 ml Suitable for cups/buckets in the food and beauty sector (with or without handle) Nodpfx Agsy A Tk Us Dswf 8 stations

Year of construction: 2001, condition: excellent (used), Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Nwsdoxww Nuepfx Ag Def Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12088 10, Performance: 125 cups per min. (gross) Consists of: -Destacker Nwedpfon D Hczjx Ag Def -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

Year of construction: 2000, condition: excellent (used), Available: Immediately Nsdjyrfwwopfx Ag Dowf

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 24, Kom.No.: 551.3852 Nwodpjn D E A Tefx Ag Def Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency.

Year of construction: 1996, condition: excellent (used), machine/vehicle number: 560037, Com.No.: 451.4013 // No. 2620 Colours: 6 // Performance: up to 36’000 cups per hour Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Nwjdpfx Agshbvrns Dsf Max. cup rim diameter: 130 mm Min. cup rim diameter: 55 mm Production speed each according to cup size, quality and Raw materials with UV drying: up to 24,000 cups per hour (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying: approx. 26 kVA Electrical connection: 3 x 400 V, 50 Hz Air connection / consumption: 6 bar / approx. 50 m3/h Weight: approx. 7,800 kg This machine doesn’t have cup positioning.

Condition: ready for operation (used), Waldner dosamat 2.2 cup filling, sealing and capping machine - 2 filling lanes - up to 4,800 cups per hour - cup destacking - piston filler for viscous products - seal foil destacker - heat sealing Njdpsyzyvnofx Ag Dswf - capping

Condition: good (used), – Magnetic plate 250 x 150 mm Njdpfx Aoy Abzzeg Dewf – 380V

Year of construction: 2022, condition: used, Model: TQC-650B Max. Forming Area: 650*300mm Max. Forming Depth: 125-180mm Sheet Thickness: 0.3-1.8mm Sheet Width: 660mm Max. Forming Speed: 30 times/min Air Pressure: 0.6-0.8mpa Air Consumption: 2.0m³/min Water Consumption: 0.5m³/h Nwsdpfxoyvh S Hs Ag Dsf Rated Power: 98Kw Used Power: 69Kw Power Supply: AC 380V,50Hz, Three-phase, Four-wire Dimension: L7000*W2000*H3100mm Weight: About 5T

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Paper cup 7OZ Njdpfx Agjyrz Aps Dewf year of production 2022 ed 110 cup/min Auto lubricating Cup colector

Condition: used, Year of construction: 1968, workpiece length 200 mm work piece width 110 mm workpiece height 135 mm dia. of cup wheel 125 mm magnetic clamping plate 200 x 100 mm spindle throat 75 mm spindle speed: 2.800 U/min. voltage 380 V total power requirement 0,8 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,65 x 0,65 x 1,80 m - Serial-No.: 5991 Nwjdpowz Rtdefx Ag Dsf - with magnetic plate - hydr. UP / DOWN - Fine feed via rotary wheel - Diamond cup wheel - Coolant device

Condition: used, Year of construction: 1998, Technical details: Nodpfxsu Ngrqe Ag Dewf height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: ready for operation (used), Year of construction: 2013, A fully automatic cup filler for buckets is available. Design: rotary machine, lanes: 1, filling capacity: approx. 3000 cups/h, filling volume: 850ml/1000ml. The control system and the servo systems of the machine were dismantled and are missing. Documentation available. An on-site inspection is possible. Nsdpfsyx H Ewsx Ag Dowf

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Nwodpfsyncppjx Ag Dsf Features and technical specifications: - With line drilling head with 7 spindles and locating pins - Spindle pitch: 32 mm - With drilling head for BLUM hinges - With drilling head for Hettich hinges - With the respective pressing dies - Motor: 400 V, 0.75 kW, 2800 rpm - With stop bars Availability: short notice Storage location: 63934 Röllbach

Condition: ready for operation (used), A Gasti cup filling and sealing machine for preformed round cups, which has been used in the dairy industry, is available. Cup diameter: 95mm, output range: 2500-4500cups/h, filling volume range: 50ml-500ml, max. product temperature: 100°C, max. product pressure: 2bar. An on-site inspection is possible. Nedoywln Uopfx Ag Djwf

Condition: used, Year of construction: 2015, total height: 925 mm, total length: 913 mm, load capacity: 480 kg, Glass Suction Lifter Brand: TECNOCAT Model: VS1 GB4 Serial Number: V3962 Year: 2015 Nwsdpfsx Sc Iuex Ag Dof Maximum Load: 480 kg Minimum Glass Dimensions: 925x865 mm Type: Vacuum suction. Suction lifter for lifting and rotating a sheet of flat, smooth glass without holes or reliefs. Performance with load: - Manual rotation - Manual tilting (Always without load) - Use of suction cup extenders Equipped with: - Suction cup plate diameter: 400 mm - Vacuum gauges - Vacuum pump - Integrated alarm in electrical box - Wired control pendant - Metal box for storage and transport - Manual tilting lever - Manual rotation lever Dimensions: 913x925 mm

Condition: new, Technical data: Distance between axes d. Grinding wheel - axis of the column: 300 mm Max. distance table - grinding wheel: 280 mm Largest grinding surface: 140 x 300 mm Rapid feed per speed: 2 Fine adjustment by micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Speed of the grinding wheel: 2840 1/min Spindle motor power: 2.2 kW Electric pump power: 0.06 kW Weight: 400 kg Dimensions: 850 x 850 x 1650 mm Equipment: - Cast column on adjustable ball roller bearings - Wet grinding device - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (first set) - Grinding wheel protection and Table enclosure Nwodpfx Agovnrius Dsf - Operating and maintenance instructions - CE declaration of conformity

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Nodpfx Agjyv Iqvj Dowf Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian