Used Curing Of Materials for sale (19,462)

Condition: new, Year of construction: 2024, functionality: fully functional, New UV light-curing units from Dr. Hönle, year of manufacture 2024, still in original packaging. Kdsdpjw Ichljfx Ai Ror Includes controller and various LED curing lamps for hardening and irradiation. Wavelengths: 356 nm and 460 nm, output: 5,000–30,000 W/cm². More detailed information can be found in the attached PDF. 3 packages available, can also be sold separately. -- Please submit your offer price. Sale only within Europe (EU), including Turkey, the United Kingdom, and Switzerland. -- Technical specifications: see handout. Excluding packaging. Any guarantee or warranty is excluded. If you wish to dismantle the equipment yourself, please indicate this in your offer. We assume no liability for the accuracy of the technical data, for the completeness of included accessories or tools, or for the compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity Installed electrical power for both dryers: approx. 210 kW 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Effective passage height: 80 mm Solvent-containing air discharged to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch panel VS-spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Supply air to the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Effective passage height: 80 mm Installed electrical power: 115 kW Solvent-containing air discharged to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch panel VS-spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Outlet electrical power: 1.5 kW; Supply air to the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-frost protection for No. 1 heating register, with sensor and automatic control of the shut-off valve 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air knife outlet velocity max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Effective passage height: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch panel TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Kedpfjztp Tksx Ai Rodr Motorized, PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Subject to change, errors and prior sale in technical data)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For businesses facing the next stage in their growth journey, there is now a unique opportunity to invest in a used AutoStore system with 15,600 bins and a total of 46 Red-Line robots. This comprehensive AutoStore system, integrated by Swisslog, combines high capacity, scalability, and proven performance in a package that rarely becomes available on the market. The system was installed in 2021 and is located in the USA, making it particularly suitable for companies with high order volumes, growth ambitions, or a need to consolidate warehouse flows. System Overview Grid: Double-Double Dimensions: approx. 24.1 x 24.8 m Height: approx. 5.5 m Number of bins: approx. 15,600 Bin size: 600 x 400 x 330 mm Robots & Capacity 46 RedLine robots 39 charging stations Ports & Flow 3 Relay Ports 8 Conveyor Ports Costs for dismantling/assembly and integration are additional. Kdodpfxjzc Hble Ai Ror We can assist in finding suitable integration partners among the various options available on the market. Contact us for a full specification and any other questions you may have.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! Kdodpfxezg Epus Ai Rsr For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: excellent (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, machine/vehicle number: EL10K14380401, working width: 230 mm, type of input current: AC, Kompac Elite Label 10 – Desktop UV and water-based coating and curing system for sheets For sale is a demo machine that has only been used sparingly and is being sold due to a relocation. The Kompac Elite 10 is a compact, high-performance desktop coating system for UV, water-based, and special coatings, as well as primers. The machine is ideal for individual sheets and, in certain areas, also for labels up to a width of 10 inches and is designed for offline operation. With the Elite Label 10, printed labels, films, and sheets can be visually enhanced and, at the same time, made more resistant by using suitable coatings. The surface coating provides brilliant gloss, rich colors, and a high-quality finish – optionally with matte or special surfaces. At the same time, the coating improves the abrasion resistance and durability of the products, especially with repeated handling, shipping stress, or outdoor use. The coating protects against chemicals, detergents, fingerprints, food, and water, among other things. The machine can be used before printing to prime difficult substrates or after digital or offset printing for finishing with various types of coatings. Thanks to the quick coating change and easy operation, it is particularly efficient for smaller and varied orders. Features and advantages: * Compact desktop coating system * Suitable for UV, water-based, and special coatings, as well as primers * With unwinding and rewinding equipment: processing of rolls up to 10" wide * Primarily suitable for individual sheets * Color touchscreen for drying control and speed adjustment during operation * No circulating system for the coating is required – this eliminates unnecessary coating waste * Standard coating change in approx. 2 minutes * Ideal for high-quality products in small runs * Optionally combinable with unwinder/rewinder or feeder and delivery table Technical data: * Paper/material width: up to 10" * Material length: virtually unlimited in roll operation Kdjdpfx Aioxzp H Tj Rer * Speed: up to approx. 24 m/min * Material thickness: approx. 7 pt to 30 pt or approx. 150 g/m² to 600 g/m² * UV lamp: Solid State (ozone-free) * Weight: approx. 90 kg * Dimensions: approx. 0.82 m x 0.51 m x 0.51 m * Electrical: 208–230 V / 1-phase / 50–60 Hz / 25 A The machine has also been converted in accordance with German occupational safety regulations. Housing openings are covered accordingly, and the power switch has been designed in accordance with VDE requirements. Overall, this is a compact, versatile, and professional solution for high-quality label finishing in-house – ideal for printing companies, label manufacturers, and companies with smaller to medium production volumes.

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Kjdozi Hchepfx Ai Rodr Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Rams: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF Ksdpfxszlh Aue Ai Redr particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: excellent (used), Here, we offer you a Stratasys Objet 3D printer. The Objet Connex 500 is the groundbreaking multi-material 3D printer from Objet. With a large build volume of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes to simulate the intended end product more closely than with any other technology. What makes the Objet Connex unique? With Objet's patented simultaneous multi-material inkjet technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex 500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. Kjdpszdnpljfx Ai Redr With it, users can simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent, and standard to ABS engineering plastics. Excellent productivity The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue separate model elements together • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - allows printing of large parts in a single build or many small parts on a single tray • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of uninterrupted capacity • High speed - simultaneous printing of multiple items from different materials; models cure during printing; models can be processed immediately after printing • Easy-to-remove support material for complex geometries • Office comfort - quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. According to the last operator, it is in working condition. No functional test has been carried out by our company. Year of manufacture: 2010 Type: Objet Connex 500 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Kdjdpfxsw H Aw Ss Ai Rer Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. Kdjdpfxjw Dd Rzo Ai Ror --- Technical specifications can be found in the handout. Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. Kdjdpfx Aozn N Ecoi Rsr • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: ready for operation (used), Year of construction: 1979, Available immediately ex-works: Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Kdsdpfx Aiozvwbuo Rsr Bending length 2550 mm Material thickness up to 6 mm Drive power 7.5 kW Weight 6 tons Price: EUR 6,750.00 plus VAT, ex-works.

Condition: good (used), Year of construction: 2020, functionality: fully functional, color channels: CMYK + White + Varnish, number of print heads: 12, total length: 3,200 mm, total width: 2,100 mm, space requirement length: 3,200 mm, space requirement width: 2,100 mm, Equipment: raster image processor, Ricoh Pro T7210 UV-LED Flatbed Printer for Sale Reliable and well-maintained UV-LED flatbed printer for demanding industrial production. Ricoh Pro T7210 UV-LED flatbed printer in good condition for sale. The machine is currently in daily production use. The printer is fully operational and has been regularly maintained. Prospective buyers are welcome to inspect the machine in a production environment and perform their own test prints prior to purchase. Technical Specifications Manufacturer: Ricoh Model: Pro T7210 Year of Manufacture: 2020 UV-LED printing technology 12 Ricoh MH54 industrial printheads CMYK + White + Varnish Print area: 2,100 × 3,200 mm Maximum material thickness: 110 mm Printing speed up to 115 m²/h 8-zone vacuum table Features White ink printing on transparent and colored materials Spot varnishing and special effects Multi-layer printing capability Energy-efficient UV-LED curing Designed for demanding industrial production environments Kdedpfx Aozbqgcsi Ror Included in the Sale RIP software Production PC Complete ready-to-run package Condition Fully operational Currently in daily production use Regularly maintained Test printing available Delivery Delivery terms: EXW (Incoterms® 2020), Veikkointie 9, FI-03100 Nummela, Finland. The buyer is responsible for dismantling, loading, transportation, and reinstallation of the machine. If required, we can recommend experienced partners for relocation and commissioning.

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Complete plastic molding line OLEOPRESS OP/Z 40 press + 3M OPZ 50 oven + PGV thermoregulator For sale: a complete line for plastic molding, consisting of: OLEOPRESS OP/Z 40 hydraulic injection press 3M OPZ 50 industrial electric oven PGV RHC7 mold thermoregulator Machines are in working order and can be inspected on site. INJECTION PRESS Manufacturer: OLEOPRESS S.r.l. (Italy) Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 tons) Configuration: Horizontal – 4 columns Technical data: Distance between columns: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Plate dimensions: 400 × 500 mm Cylinder heating capacity: approx. 6–8 kW Kedpfxozpbc Ao Ai Rjdr Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Estimated weight: approx. 2,800 kg INDUSTRIAL OVEN Manufacturer: 3M Forni Industriali (Italy) Model: OPZ 50 Power supply: 400 V Installed power: 36 kW (18 + 18 kW) Maximum temperature: 650°C High-temperature industrial electric oven, suitable for: mold preheating post-curing polymerization of thermosetting materials MOLD THERMOREGULATOR Manufacturer: PGV srl (Italy) Model: RHC7 Power supply: 400 V Rated current: 28.6 A Interrupting capacity: 17.6 kA Unit for controlling mold temperature during the production cycle.

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 570115, Year of construction: 2013, operating hours: 928 h, total length: 1,400 mm, total height: 1,260 mm, total width: 1,100 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, For sale is a Stratasys Objet500 PolyJet 3D printer. The machine is explicitly offered as defective/in need of repair, as several print heads need to be replaced. The Stratasys Objet500 series is a professional industrial 3D printing system based on PolyJet technology. PolyJet works with liquid photopolymer, which is applied layer by layer via print heads and cured by UV light. The Objet500 models are designed for high-resolution prototypes, design models, functional prototypes, molds, fixtures, and components with fine surface quality. After repair, the machine is suitable for professional applications in the field of rapid prototyping, product development, model making, design, medical technology, engineering, and small-series production. Depending on the version of the Objet500 series, multi-material or digital material applications are also possible. Stratasys describes the Objet500-Connex family as a triple-jetting platform with multiple material/color or material combination options. Condition: Defective / in need of repair. Based on current knowledge, some print heads need to be replaced. Therefore, the machine is explicitly sold without any functional guarantee. Commissioning or repair should be carried out by qualified personnel or an authorized Stratasys service partner. On-site inspection is possible by arrangement. The machine may be of interest as a repair project, a source of spare parts, or for reconditioning by a specialist company. Technical data according to the manufacturer's specifications for the Objet500 series: Manufacturer: Stratasys Model: Objet500 / Objet500 Connex series Process: PolyJet 3D printing Build volume: approx. 490 × 390 × 200 mm Layer thickness: up to 16 micrometers Resolution: 600 dpi X-axis / 600 dpi Y-axis / 1600 dpi Z-axis Machine dimensions: approx. 1,400 × 1,260 × 1,100 mm Machine weight: approx. 430 kg Material cabinet: approx. 330 × 1,170 × 640 mm Weight of material cabinet: approx. 76 kg Power supply, depending on the version: 100–120 V or 220–240 V, 50/60 Hz, 1-phase Support material, depending on the system: SUP705 / SUP706B, depending on version and material approval Kjdpfxjy Uwlas Ai Rjdr The technical specifications refer to publicly available manufacturer/support data for the Stratasys Objet500 series. Stratasys specifies the build volume for the Objet500 Connex 1-2-3 as 490 × 390 × 200 mm; weight and system size are stated in data sheets as approx. 430 kg and 1,400 × 1,260 × 1,100 mm. Note regarding the defect: The machine is not sold as operational. Known defect: print heads need to be replaced. Other defects cannot be ruled out. Therefore, the machine is explicitly sold as a defective used machine/repair device/source of spare parts. Terms of sale: Sale exclusively to commercial enterprises/businesses. The machine is sold as a used machine, as described or as inspected, excluding any liability for defects/warranty. No guarantee is provided. Errors and prior sale are subject to change. Inspection possible by arrangement. Sale takes place at the location.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 250 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Industrial Powder Coating Ovens – Flexible Designs, Sizes & High-End Upgrade Options Are you looking for a powerful, reliable, and efficient curing oven for your powder coating process? We provide customized solutions for every application – from compact chamber ovens to fully integrated conveyor systems! Versatile designs for every process: No matter how your production is organized, we offer the right oven concept for your material flow: - Chamber ovens: Classic design with single-sided doors for batch loading. - Tunnel ovens: Practical pass-through solution with doors on both sides for an optimized loading and unloading process. - Special ovens for conveyor systems: Specifically designed ovens for continuous production processes, perfectly adapted to automatic conveying technology with a conveyor chain. - Flexible door systems: Depending on space and requirements, optionally equipped with swing doors or space-saving sliding doors. Your oven, tailored to your needs – Standardized performance or 100% custom design: Our standard model range: - Flexible dimensions: Standard internal lengths up to 6.5 m with selectable internal widths of 1.7 m or 1.9 m (standard height: 2.0 m) - Heating according to choice: Fully flexible, available as an electric version or with an efficient gas burner Kjdpfsfhv Tljx Ai Rjdr - Versatile loading: Standard preparation for use with rack cars or for integration into a conveying system Individual customized solutions: - Free dimensions & geometries: We manufacture any desired special size, deviating construction heights, or complex spatial geometries exactly according to your specifications - Special heating concepts: Specific burner outputs or adapted heating zones for complex component requirements - Special conveying technology: Tailored integration for integrated overhead conveyor chains, automatic indexing conveyors, or individual crane and lifting systems Smart additional options & upgrades: - Automatic door control: Convenient, automatic opening and closing for sliding doors - Inverter control of the circulating air: When the doors are open, the fan speed is automatically reduced. This prevents the warm air from blowing out, noticeably minimizes energy loss, and saves money. - Temperature curve recording: Complete recording and logging of the curing process for quality and process documentation - Extended sensors & temperature monitoring: All of our ovens have a highly precise, uniform temperature distribution of ±5°C. For the highest quality standards, additional sensors can be integrated upon request to document the homogeneity in the entire oven chamber in detail. Technical highlights of our ovens: Maximum efficiency: High-quality 150 mm rock wool insulation for minimal heat loss Powerful circulating air: High-performance fans for perfect heat distribution and uniform curing results Higher temperature ranges: Maximum operating temperature up to 250 °C Durable & robust: Stainless steel thermo-block with integrated overheating protection and heat-resistant bearings Including control: Complete electrical control included in the scope of supply Contact us! We offer free consultation. We plan and manufacture your powder coating oven exactly as you need it for your production.

Condition: ready for operation (used), Year of construction: 1982, Available immediately, ex works: Shearing machine, Schröder Capacity: 2500 x 4 mm Cutting length: 2550 mm Material thickness: up to 4 mm Electric back gauge: 1000 mm Drive power: 5.5 kW Weight: 3.5 tons Ksdpfx Aiozvwb Is Redr Price: EUR 4,750.00 plus VAT, ex works

Year of construction: 2021, operating hours: 100 h, condition: like new (used), The chamber furnace is ideally suited for preheating, drying, curing, and other thermal treatment processes of various materials within a temperature range of 50°C to 150°C. We can highly recommend this furnace as an ammunition dryer. Chamber volume: 7392 Chamber dimensions: 2200x1400x2400mm (WxDxH) External dimensions: 3050x2700x2720mm (WxDxH) Kodpolk Hiiofx Ai Redr Maximum temperature: 160 Heating power: 54kW Total power: 59kW Weight: 2800kg

Year of construction: 1996, condition: good (used), functionality: fully functional, GALLUS T 180 Kdedpfx Ajztqp Tei Rsr SCREEN AND LETTERPRESS LABEL PRINTING MACHINE WITH HOT-FOIL STAMPING, EMBOSSING, AND FLATBED DIE-CUTTING We are pleased to offer the following versatile GALLUS T 180, designed for the production and finishing of high-quality narrow-web labels. The machine combines three screen-printing units with one letterpress printing unit, UV curing, hot-foil stamping, embossing, and flatbed die-cutting. Thanks to the integrated unwinding and rewinding system, finished rolls can be produced directly within the machine in one complete production process. _____ MACHINE DETAILS Manufacturer: Gallus Model: T 180 Year of manufacture: 1996 Web width: 180 mm Printing processes: Screen printing and letterpress printing Printing units: 3 screen-printing units and 1 letterpress unit Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 3 screen-printing units • 1 letterpress printing unit • Suitable for high-opacity inks, solid colors, and detailed print applications • Combination of screen and letterpress printing within one production line Drying System • UV curing system • Immediate curing of inks and varnishes • Suitable for direct inline finishing and further processing Varnishing • Varnishing capability within the letterpress printing unit • Suitable for protective and decorative varnish applications • Inline finishing without the need for an additional standalone varnishing machine Decorative Finishing • Hot-foil stamping unit • Embossing capability • Suitable for metallic, decorative, and tactile finishing effects • Particularly attractive for premium and specialty label applications Web Handling • Unwinding unit • Rewinding unit • Controlled material transport throughout the complete production process • Finished rolls can be produced directly in the machine Die-Cutting • Flatbed die-cutting unit • Suitable for precise die-cutting of different label shapes and materials • Inline production from raw material to finished rolls _____

Condition: good (used), Year of construction: 2018, functionality: fully functional, Gema Year of manufacture: 2018 Kdsdpfx Aiey Al T Ie Rsr Equipped with 6 automatic guns, 2 manual spray guns Max. pass-through dimensions: L x H x W, 3m x 2m x 1.1m Magic Compact BA04 Color change system Magic Compact BA4 OptiCenter OC2 Powder coating device OptiMatic AS06-8P Lifting equipment ZA7-23 Mono-cyclone 24,000 [Nm3/h] from Therma Afterfilter exhaust air volume 24,000 [Nm3/h] STS fire suppression system Caldan Overhead conveyor system Power & Free by Caldan Year of manufacture: 2018 Approx. 120 linear meters, with 12 product carrier trolleys, each 3 meters Custom built by Protaurus Gas-heated curing oven by Protaurus Year of manufacture: 2018 Weishaupt burner type WG40N/1-A, 500 kW output Complete with control system and accessories Without insulation material, oven casing needs to be overhauled Complete system by Gema and Caldan professionally packed Professional reassembly by Gema and Caldan prepared Layout attached Transportation costs, reassembly, and commissioning to be borne by the buyer

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Kdedpezvnbxofx Ai Rjr Additional equipment Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new SOLAR PHOTOVOLTAIC (PV) PANEL/MODULE PRODUCTION LINE, year of construction 2023. A solar panel manufacturing facility for sale capable of processing both PERC and TOPCon solar cells and producing a wide range of popular PV modules currently demanded in the market. The fully automated production line has an annual capacity of 250 MW and can manufacture various module configurations, including 450W, 585W, and 630W class modules with TOPCon 16BB technology, available in black frame with black backsheet, glass-to-glass, white backsheet, and transparent backsheet options. The facility is also capable of producing 10BB PERC modules up to 550W. Equipped with a double-layer double-chamber laminator, automatic framing system, automatic sorting system, and fully integrated high-efficiency manufacturing processes, this turnkey production line offers flexible production capabilities for today’s leading solar panel designs. With a highly competitive price, this is a rare investment opportunity for serious buyers seeking to enter or expand in the solar PV manufacturing industry. Popular panel types like 550 W PERC , 585 W TOPCON Glass to Glass ; 630 W TOPCON Glass to Glass can be produced with this line. Manufacturer: ARGUS SUNIC Model: 2023 Year of manufacture: 2023 Condition: as new Category ID: 33 Machine type: SOLAR (PV) PANEL PRODUCTION LINE Production capability: Complete photovoltaic (PV) module manufacturing line covering the entire production process from cell stringing to final testing and sorting Supported solar cell types: 182 × 182 mm 10BB PERC (M10); 210 × 210 mm 12BB PERC (M12); 182 × 182 mm 16BB TOPCon (M10); 182 × 210 mm 16BB TOPCon (G12R) Layout: Existing layout is shown in the photos Includes Tabber & Stringer Includes Automatic Robot Layup System Includes Automatic Glass Feeding & Transfer System Includes EVA Cutting & Layup Machines Includes TPT/Backsheet Cutting & Layup Machine Includes Automatic Bussing Station Includes Automatic Taping Station Includes Automatic Double Glass Feeding & Die Spotting Machine Includes Automatic Double-Chamber Laminator Includes Automatic Frame Gluing & Framing Machine (3-in-1) Includes Automatic Edge Banding Machine Includes Automatic Edge Trimming Machine Includes Junction Box Glue Filling Machine Kodpfxsznmhho Ai Rjdr Includes Junction Box Gluing Machine Includes EL Inspection System Includes IV Module Tester (A+A+A+ Class) Includes Hi-Pot Tester Includes Automatic Module Sorting Machine Includes Automatic Laser Scribing Machine Includes Solar Cell Tester Includes Automatic Corner Grinding Machine Includes Automatic Corner Wrapping Machine Includes Automatic Module Loading & Unloading System Includes Plate Chain Curing Conveyor Includes Glass Stacking Machine Includes Visual Inspection Stations Includes Flip Inspection Table Includes Conveyor Systems (Transverse & Longitudinal) Includes Buffer Stations Includes Rotary Units Includes Corner Turning Units Includes Barcode Printing System Includes Control Cabinets Includes Material Handling Trolleys & Auxiliary Equipment If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1981, Immediately available ex works: Hydraulic guillotine shear Köllschen Model BSH 2000/12.5 Year of manufacture: 1981 Kdsdpfx Aszvwbnji Rsr Cutting length: 2050 mm Material thickness: up to 12.5 mm Motorized backgauge: 5 – 1000 mm Drive power: 15 kW Weight: 11 t Price: EUR 3,000 plus VAT ex location

Condition: used, Year of construction: 2019, Used Machine Year of Manufacture: 2019 Condition: The machine is sold "as is." It was in operation until early 2026 and has been continuously connected to a power source ever since, with the exception of the time it was transported to our warehouse. Features and Technical Specifications: Printing bed: 2,500 × 1,300 mm High printing speed: Up to 25 m²/h or 8 sheets/h in 2,440 × 1,220 mm format at 4C Up to approx. 12.5 m²/h at 4C W with simultaneous white printing New ink supply system: The 1-liter ink bottles can be conveniently replaced from the front—making refilling particularly quick and easy. Simple operation without alignment issues: Alignment pins and registration pins, along with a printed measurement scale, enable precise positioning of the media on the print table. The pins secure the media to prevent slipping. Using the measurement scale, layout and RIP data can be easily adjusted to the desired position. High flexibility thanks to direct printing on a wide variety of media, including thick substrates up to 50 mm in thickness. The Mimaki Advance Pass System reduces unwanted banding and improves print quality. The special Mimaki circulation system prevents white ink from settling. Mimaki Clear Control (MCC): To prevent dust adhesion and small air bubbles, the drying time and UV radiation are adjusted. This results in both glossy and stylish matte finishes. By applying multiple layers of clear coat, the print can also be embossed to create multidimensional effects. Convenient ink selection: LH-100: hard UV ink for smooth surfaces with high scratch resistance, color brilliance, and solvent resistance LUS-150: flexible UV ink for smooth and uneven surfaces, deformable up to approx. 150%, and suitable for numerous substrates White ink for image underprinting reduces light show-through Two-layer printing with white on clear and colored surfaces Finishing with a glossy or matte varnish Environmentally conscious printing: UV printing technology does not release any harmful substances. UV-LED lamps ensure low power consumption and a long service life. RasterLink 6: Powerful RIP for outstanding color reproduction Different print jobs can be easily nested Simple and user-friendly operation Self-explanatory icons make getting started easy Related RIP settings are clearly arranged in a single window Settings can be saved as favorites for repeated use Direct monitoring of the printing process in the main window Software and profiles can be updated via the Internet Technical Specifications: Printing method: Piezo inkjet Print heads: 2 heads in an offset arrangement Max. print format (W × L): 2,500 × 1,300 mm Max. material format (W × L): 2,500 × 1,300 mm Max. material thickness: 50 mmMax. material weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900, and 1,200 dpi Media Suction: Vacuum Vacuum Zones: 2 zones along the X-axis Kdsdszlbtajpfx Ai Rer Accuracy: absolute ±0.3 mm or ±0.3% of the specified distance; whichever is greater Repeatability: ±0.2 mm or ±0.1% of the specified distance; the greater value applies Curing: UV-LED technology Service life of UV-LED lamps: Reference value over 5,000 hours, not guaranteed Interface: USB 2.0 Power consumption: up to 2.88 kW Power supply: 200–240 V, 50/60 Hz, single-phase, up to 12 A Dimensions (W × D × H): 4,400 × 2,250 × 1,250 mm Weight: 650 kg Availability: upon request Storage l...

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Drive power 5.5 kW Kdsdpszvv Sxofx Ai Rjr Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works