Used Cutting Frames And Tools for sale (52,957)

Condition: good (used), Each dimension of the cutting maschine will only be sold in a set of 2. Lodpfxogzpane Akyjhf

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Ljdpfx Aodzqmzskyohf Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: good (used), PLasma cutting machine ready to work. Lhjdpfx Akjqzyp Ueyjf

Condition: good (used), Cutting range, internal thread: M 2 - M 12 Lodpjd D U T Hsfx Akyohf Working radius approx.: 1650 mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, input voltage: 400 V, hose package length: 22,800 mm, ground cable length: 5,000 mm, sheet thickness steel (max.): 50 mm, air pressure: 5.9 bar, Next-generation air plasma system that significantly simplifies system operation for cutting and gouging up to 32 mm, featuring automated process setup via advanced RFID-enabled SmartSYNC torch and a revolutionary one-piece consumable that provides trackable usage data. Technical data: Cutting performance: Recommended cutting capacity: 32 mm – 500 mm/min Maximum cutting capacity: 38 mm – 250 mm/min Severance capacity: 50 mm – 125 mm/min Pierce capacity: 22 mm Typical gouging: Ljdpfeykp R Sex Akyjhf Metal removal rate: 8.6 kg per hour Gouge profile: 6.6 mm D x 6.0 mm W Scope of delivery: Power cable, H105 handheld torch 22.8 m (75°), work lead with clamp, instruction manual

Condition: reconditioned (used), Year of construction: 2026, machine/vehicle number: 2008 / 576, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. - machine after general overhaul in 02/2026 - new bearings, new linear guides, new rollers, new oil & air pipes, new clutch & brake, both crank arms new...Machine like new. Lhsdpfsyv D Taex Akyof The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw.

Year of construction: 2017, condition: ready for operation (used), A Neva lamella saw with a saw frame movement methodology is available. Frame stroke: 210mm, stroke rate: 450/min, max. cutting height: 350mm, max. working width: 155mm, max. lamella length: 155mm, min. lamella thickness: 1.5mm, rollers bottom/top: 11/4, production capacity per 8h: approx. 550m²-800m², max. feed speed: 2m/min. Machine dimensions X/Y/Z: approx. 2600mm/800mm/2000mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Ledpfx Akjynaupeyohf

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Lhodpfxsuhm E Ss Akyef Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Lhsdpfoulc Ixjx Akyof Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: excellent (used), Year of construction: 1999, Clamp width: 175mm Max. opening: 500mm Manuel or hydraulic: manuel Number of matching vices:4 Length: 766mm Ledpfx Ajydbwdekyjhf Width: 170mm Height: 70mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Lsdevi Enajpfx Akyjhf Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: used, Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch für KUGLER-WOMAKO ProPunch 50-110 Daumenloch Druchmesser 20mm Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Lsdpfjx Rdc Rex Akyohf Thumb Cut 20mm  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2005, I sell the thin cutting mini frame saw gatter NEVA TR88 Orbit plus, year 2005. Configuration with top + bottom moulding heads 1,5 + 1,5 KW suitable for later lamellas gluing Main motor 15 KW Working height 270mm Lhjdsiuc Scepfx Akysf Digital working height adjustment w. ELGO Electric Positioner Digital feedign speed adjustment w.MKS Total weight 2800kg. Lot extras, saw leafs, adjustment elements and frame adjustment device indluded. Very good condition. Fully working. Made in Czech republic.

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch Lhodpfxsb A Rxcj Akyef -Integrated reversing gearbox with quick return -Thread cutting sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.1 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 3,500 kg, We offer this CNC plasma cutter YK 1560 in very good condition, year of manufacture 2012. type: CNC plasma cutter model: YK 1560 serial number: 201202 weight: 3,500 kg power: 2.5 kW date of manufacture: 15-01-2012 If you have any questions or require additional information, please send us a message or call us. Lhjdpfxex Uwlgs Akyof

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x800x1900 mm Ledpfjvz E Nujx Akyohf Weight 2400 kg Total power requirement 16 kw

Condition: good (used), Year of construction: 2015, Metal cutting Tooling Ledpfxjwvht Re Akyshf TOS - HUR 50 MACH-ID 2923 Make: TOS Type: HUR 50 Year: 2015

Condition: excellent (used), Diameter: 800mm 3 Chuck: yes Spindle bore:130mm Connector: Camlock 13 Max. speed: 100Rpm Length: 800mm Width: 800mm Lodpfx Akswvrp Aoyehf Height: 400mm Weight: 200kg

Condition: good (used), Year of construction: 2009, Horizontal: Yes Lhodpfowvq Tajx Akyef Vertical: Yes Diameter: 220mm indexing: 360.000° Centre height:220mm Control system:Siemens 840D Length: 600mm Width: 400mm Height: 800mm Weight: 200kg

Condition: excellent (used), Lista Drawer Cabinet with Milling Cutter Lista Drawer Cabinet Number of Drawers: 13 Extension Type: Full Extension Lhodpfx Asq Aa I Tjkyef Very high load capacity thanks to precise and stable construction made of high-quality, welded sheet steel Body Color: Reseda Green, RAL 6011 Load Capacity per Drawer: 200 kg External Dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal Circular Saw Blades Cross-toothed & Coupled Disc Cutters Cross-toothed Disc Cutters Angle Semi-Circular Cutters Dovetail Cutters Semi-Circular Cutters Thread Cutters Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Horizontal Mitre Band Saw in Swivel Bow Design JAESPA Type W 320 G Serial No. 18793 / 99 Year of Manufacture: 1999 Cutting Capacity at 90° (Round): Ø 320 mm Cutting Capacity at 90° (Square): 320 x 320 mm Cutting Capacity at 90° (Flat): 460 x 200 mm Cutting Capacity at 45° (Round): Ø 290 mm Cutting Capacity at 45° (Flat): 290 x 220 mm Cutting Capacity at 45° (Square): 240 x 240 mm Cutting Capacity at 30° (Round): Ø 200 mm Cutting Capacity at 30° (Square): 200 x 200 mm Cutting Capacity at 30° (Flat): 220 x 200 mm Saw Blade Dimensions: 4120 x 27 x 0.9 mm Blade Speed: approx. 50 m/min Material Feed Height: approx. 630 mm Saw Motor Power: 1.5 kW Connection: 400 Volt, 50 Hz - Quick mitre adjustment via pivoting saw bow with rotary table and clamping - Infinitely variable mitre cuts from 30° - 90° - Hydraulic saw bow movement with rapid approach and return stroke after cutting - Material height detection via limit switch - Quick-adjust vice with eccentric clamping Lhedpewwaz Ajfx Akysf - Coolant system integrated in machine base - Emergency stop mushroom push button Required space (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system Lhsdpfx Aercm Ruokysf - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length Lhodpfxevv R H Ue Akyof ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, HAAS-LASER HL 54P Laser welding machine Lhsdpfstqynqox Akysf Excellent Condition with all the manuals and accessories. Laser source Trumpf

Condition: used, Year of construction: 2024, The E3304 cutting machine, manufactured by Pandway in 2024, is currently in stock and located in Germany. This machine has a format of 330 mm and is capable of cutting thicknesses up to 40 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 330 mm Lhsdpfsvfxw Hjx Akyef Equipment: cutting thickness 40 mm