Used Dec Filter Hose Chip Extraction for sale (17,314)

Condition: good (used), Filter hose chip extraction, dust bag, filter, filter bag for chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose -Ventilation hose: Exhaust hose with flange -Flange: Ø outside 290 mm, slightly curved Lhsdepyk Nfopfx Akyoh -Length: 3500 mm -Number: 20 hoses available -Price: per piece -Weight: 1.6 kg/piece

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Lhsdpsr R Ewlofx Akyoh Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Filter housing, dust extractor, extraction installation, filter unit, dust filter Dimensions: 680mm x 680mm x 2800mm Ledpfxewyf T Aj Akyehh Outlet diameter: 200mm Capacity: 1500 m3/h New top filter 3 round filter cartridges need replacement Complete with control cabinet and pneumatically cleaned filter cartridges

Condition: good (used), Filtration system extraction unit filter unit dust filter filter cabinet Infastaub Filter surface area 22.5 m² 900–1080 m³/h Includes new holders and filter bags All stainless steel Ljdewyf Tpopfx Akyshh Diameter 800 mm Height 860 mm Equipped with compressed air-cleaned filter Equipped with control cabinet See our other advertisements

Condition: good (used), J-Tec sack tipping cabinet with filter extraction Entirely stainless steel Lockable by lid Full sensor present Control cabinet excl. cabling Equipped with pneumatic bunker vibrator Matching weighing hopper with vacuum filter and double K-Tron dosing screw also available Lhsdpfewyf Iyex Akyjh See our other advertisements

Condition: new, WAM FLO dust collector, extraction hood, filter housing, extraction system Ljdpfx Aswyf Aqjkyshh New Fan motor power: 3 kW, 3000 rpm Filter area: 22 m2 Equipped with electro-pneumatically cleaned filter cartridges Stainless steel 304 Zero dust emissions 7 units in stock See our other listings VMA Wekerom

Condition: used, Year of construction: 1994, Absackstand filter used Year of manufacture: 1994 with weather protection enclosure Ledpey Nuhhefx Akyjhh with return air ducting with S 250 fan 4590 m³/h Motor 4 kW Availability: short notice Stock location: Villingen-Schwenningen If dismantled and collected by the buyer from the site, the system can be made available for 500 € + VAT.

Condition: used, Flexible extraction hose, 2 pieces, length 4400 mm, diameter 300 mm, material: stainless steel. Lhsdjzgtbfspfx Akysh

Condition: used, Chip dust suction filter, with automatic filter cleaning (wash control with blowers and Macair panel) at 1 bag. Motor-powered lathe, optional Euro 500 + VAT Ledpfotxdpxjx Akyjhh Suction motor power:: Kw. 4 Filtration size: Main tube mouth mm. 250, deviations mm. 150 each

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 Lhjdpeuc Unqofx Akyoh 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges Lsdpfx Aevvcqxekyjhh 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Lhjdjyq Nl Nspfx Akyoh Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: used, Year of construction: 2022, Volume flow rate: 18,000 m³/h, active filter area 237.6 m², condensate drain, designed for 10 machining centers, mounted on a custom-built steel frame above the hall entrance gate, complete with piping, manufactured to the dimensions of the hall, and intended as a supply line to the individual CNC machining centers. Subject to prior sale. Lhsdpfx Ajy T Nxvjkysh

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg Ledpfjb Iqf Ujx Akyohh

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 9690 m³/h -Total pressure: 3038 Pa -Motor: AEG 18.5 kW 1460 rpm -Connection input: Ø 350 mm -Connection output: Ø 360 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø810 x 200 mm Lhodpfx Akev Ni Uwsyoh -Dimensions total: 1220/785/H1500 mm -Weight: 396 kg

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Lhjdpfxsxxalne Akyoh Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards Lodpex Da Tijfx Akyjhh • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Quantity: 1 piece available Lhsdpey R S E Hofx Akysh -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Lodpfx Aoyh Hp Rekyshh Cartridge dust extraction system, cartridge filter unit, cartridge filter -Filter system: with vibrator -Type: TMS 8/10 -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm -Dimensions: 1070/680/H2530 mm -Weight: 243 kg

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Lodpfxsy Sz Dne Akyshh Capacity: 2400 m3/h Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Lhedpfsxzrzajx Akysh Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg WARNING!! This machine is a return item. Mechanical damage to the casing, broken electrical box.

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG Lhjdswl Dn Aspfx Akysh 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg MACHINE USED: RETURNED, REPAINTED, VISIBLE SIGNS OF PAINT, 100% OPERATIONAL

Condition: good (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson, Filter system cartridge filter -Type: Torit Downflo DF 6 -Motor power: 3 kW Lhjdpfxjy Nnkvs Akysh -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic -Extraction opening: 3x Ø 320 mm -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg

Condition: good (used), Year of construction: 2003, Filter rinsing tank Ljdjiw Eafspfx Akyjhh Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003

Condition: new, Year of construction: 2025, machine/vehicle number: 011/2020, STK-10000i is low-cost vacuum system from SAF TEKNIK and it offers very good filtration with a lot of power and airflow! It includes multiple filter columns and filter cleaning through vibrating. It also has a separator for bigger parts, which prevents damage to the whole system. TECH. SPECIFICATION: - Motor power: 11 KW - NEW: Frequency inverter for main motor Lhsdef D S Trepfx Akyoh - Exhaust capacity: 10000 m3/h - Air speed: 41 m/s - filter area: 30 m2 - bin volume: 810 Liters - exhaust inlet diameter: 355 mm - weight: 740 kg - dimensions: 3170 mm X 1200 mm X 2330 mm OTHER VERSIONS, also available: - STK-6500 (6500 m3/h) - STK-8000 (8000 m3/h)