Used Deep-Drawing Press (Triple Action) for sale (16,161)

Year of construction: 1981, condition: like new (used), Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used. Technical data: Year of manufacture: 1981 Pressing capacity in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table size (lxb) in mm: 1600 x 1300 Ram size (lxb) in mm: 1500 x 1300 Daylight in mm: 850 Rcodpfed Ntd Dox Ab Tef Upper ejector stroke in mm: 160 Upper ejector force in t: 6,3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power consumption in kW: 150 Overall size (lxbxh) in mm: 3550 x 1200 x 5940 Total weight in kg: 50000

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Rcedpsyupulefx Ab Tof Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: good (used), Year of construction: 1995, power: 22 kW (29.91 HP), pressing force: 120 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,000 mm, table height: 950 mm, retraction force: 5 t, total length: 2,100 mm, total width: 2,050 mm, total height: 3,800 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, installation height: 900 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Rcedpjycin Ujfx Ab Tjf

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WE OFFER AN BEAUTIFULL CONDITION DEEP DRAWN PRESS 160 TON WITH BACK FORCE BOTTOM 70 TON MACHINE WAS BUILD ON ORDER MACHINE WAS USED ONLY A COUPLE TIMES PER YEAR FOR SOME SMALL PARTS. CONDITION IS EXCELLENT . NEWER RUN A PRODUCTION. WE CAN ALSO DELIVER MACHINE FOR A CUSTOMER TABLE SIZE: 1030 X 630 Rjdpfx Abjvxbn Uo Tscf OPEN GAP: 740 MM TOTAL WEIGHT APPROX 8000KG DIMENSION 1500 X 1500 X 4000

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Description WE OFFER AN VERY NICE CONDITION PRESS FOR DEEP DRAWN PARTS DOUBLE ACTING FROM UP DOWN Redpjvlduwjfx Ab Tjcf MACHINE WAS USED ONLY FOR A SMALL UNIQUE WORK OF ART LIGHTS FOR AN DESIGNER PRODUCTION MACHINE HAS TRIPLE PRESS DEVICES MACHINE HAS BEEN HIDRAULIC RETROFITTED IN 2005 NOT LONG AGO , AND IT IS READY TO USE MAX DRUCK: 140 TON + 80 TON ADDITTIONAL MAX BOTTOM POWER : 60 TON APPROX MACHINE WILL BE AWAILIBLE TO PICK UP AFTER NEW YEAR IN 2025 FROM SECOND WEEK IN JANUARY Specifications Manufacturer SMG Model HZPUX 100/50-1000/850 Year 1957 Condition Used

Year of construction: 2014, condition: refurbished (used), High-performance 40 Ton Triple tube drawing bench BÜLTMANN GKZ 400/3-16 Complete 40 tn triple tube drawing line, revamped by Bültmann in 2014. Includes extensive set of tooling and large spare parts package. This BULTMANN GKZ 400/3-16 Triple tube drawing line combines a robust 40-ton drawing capacity with significant upgrades completed in 2014, including a Siemens S7-400 PLC conversion, renewed machine bed, rebuilt puller, and upgraded drawing carriage. The line is available immediately and is suitable for demanding tube production applications. TECHNICAL SPECIFICATIONS · Manufacturer: BÜLTMANN · Model: GKZ 400/3-16 Triple · Major overhaul: 2014 - Control cabinet overhauled - PLC converted to Siemens S7-400 - New Siemens drives - Machine bed renewed - Drawing carriage converted (wheels, damping, etc.) - New chain - Puller rebuilt · Material strength: 500 N/mm² · Input tube length: 2.5–12 m · Exit tube length: 3–16 m · Maximum drawing force: 400 kN (40 tons) · Maximum drawing speed: 80 m/min · Return speed: 120 m/min · Main motor power: 300 kW · Hydraulic power unit: 30 kW · Auxiliary drives: 7.5 kW · Tube diameter range*: 20–65 mm · Wall thickness range: 1–5 mm * Tube range produced by the previous owner. Tooling is available for this range and should be verified onsite. SCOPE OF SUPPLY - Complete drawing bench according to layout - Renewed machine bed - Upgraded drawing carriage - New chain - Rebuilt puller - Electrical system with Siemens S7-400 PLC and Siemens drives - Hydraulic system - Existing safety barriers - Large set of tooling (to be verified onsite) - Comprehensive spare parts package (to be verified onsite) - Documentation in digital and paper format BENEFITS ✓ High-capacity 40-ton drawing force for demanding tube production ✓ Modernized Siemens automation for improved reliability and maintenance ✓ Major mechanical refurbishment completed by BÜLTMANN ✓ Includes tooling, spare parts package, and documentation ✓ Immediate availability for rapid installation COMMERCIAL INFORMATION - Machine status: Dismantled - Video of the line in operation available Rcodpozkf I Ejfx Ab Tef - Delivery: Immediate | As is, where is Material strength: 500 N/mm² Input tube length: 2.5–12 m Exit tube length: 3–16 m Maximum drawing force: 400 kN (40 tons) Maximum drawing speed: 80 m/min Return speed: 120 m/min Main motor power: 300 kW Hydraulic power unit: 30 kW Auxiliary drives: 7.5 kW Tube diameter range*: 20–65 mm (*Produced by previous owner. Tooling available for that range. To be checked onsite) Wall thickness range: 1–5 mm

Condition: good (used), Year of construction: 1981, functionality: fully functional, WE OFFER AN NICE CONDITION PRESS SMG DZ 100-750/560 WITH SAFETY SICK CONTROL BARIER Rcodpsvldxpjfx Ab Tef POWER: 1000 KN MACHINE IS AWAILIBLE IMEDIATELY FROM STOCK.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr Rcodpfx Abotndu Us Tjf FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 06060408, Description Grass Flexi Press (2006) including accessories Due to the purchase of a CNC machine, this professional Grass Flexi Press hinge and fitting drilling machine is no longer needed. The machine has always been well-maintained, has undergone annual inspections, and is in excellent/good condition. Ready for immediate use in the workshop! Specifications & Details: Make/Model: Grass Flexi Press Rodpfszrvausx Ab Tjcf Year of manufacture: 2006 Condition: Well-maintained and annually inspected Includes: Various accessories / drill bits Reason for sale: No longer needed due to switching to CNC Interested or have questions? Please feel free to contact us for more information or to arrange a viewing of the machine.

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information Rcjdpfsx Ndu Dox Ab Tof • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: new, pressing force: 200 t, DURENDUS 200 T Deep Drawing Press – Double Column Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here was already built and delivered to a customer's order. We can manufacture a new machine of this model for you at short notice – including individual options tailored to your requirements. This is a hydraulic deep drawing press with integrated drawing cushion function designed for forming processes, drawing operations, and precise sheet metal processing. Base price: €76,000 net Options (upon request): The options listed are based on completed customer projects and allow targeted adaptation of the machine to your specific application. The basic version offers a functional standard configuration – in practice, it is usually enhanced with additional features and specifically configured to project requirements. * T-slots and holes to customer specification * Adaptation of stroke, installation height, and press force range * Extended drawing cushion configuration * Customized control modifications * Enhanced safety and monitoring systems ==== Technical Data + Information: ==== General Information * Design: Double column press * Press force: 40–200 t (adjustable) * Total weight: approx. 5,500 kg * Overall dimensions (W × D × H): 2,370 × 1,300 × 3,300 mm ==== Working Area * Table size: 900 × 900 mm * Ram area: 900 × 900 mm * Installation height: max. 800 mm ==== Table & Ram * Table height: 1,000 mm * Ram stroke: 0–500 mm (adjustable) * Column guide: 4 columns Ø 120 mm ==== Speeds * Pressing speed: 4–10 mm/s * Idle speed: 10 mm/s * Return speed: 16 mm/s * Drawing cushion speed: 20 mm/s ==== Hydraulics & Drive * Operating pressure: max. 260 bar * Pump capacity: 70 l/min * Servo motor power: 15 kW * Pressure accuracy: ±5 bar * Hydraulic system with air cooling and oil monitoring ==== Control & Operation * Two-hand operation * Mode selector switch (key switch) * Modes: setup, manual cycle Rcsdpfxjyzf A He Ab Tof * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 20 kW ==== Equipment * Drawing cushion: 30–80 t, stroke 200 mm * CE-compliant design * Safety limit switches * Hydraulic interlock * Control cabinet IP54 with brand components (SIEMENS, ALLEN BRADLEY, SICK) * Two-layer coating according to RAL colors ===== Deep drawing, sheet metal forming, forming technology, manufacture of drawn parts, series production, metalworking Deep drawing press, hydraulic press, double column press, drawing cushion press, forming press, sheet metal processing press Are you looking for a hydraulic press tailored to your application? Contact us for an individualized quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations.

Year of construction: 2010, condition: ready for operation (used), A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026. Redpfx Aboy Aafrj Tscf

Condition: used, pressure 1000 t distance between columns . mm stroke . mm total power requirement . kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Rodpjzk Rcusfx Ab Tecf than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Rcodpfx Aboxaphbe Tof

Condition: excellent (used), Year of construction: 2014, We are offering a high-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Completely ready for connection, including all cables Note: The PC is password-protected, but the software is included on CD Various sensor heads: Measurement volumes: Rcjdpezpwg Rofx Ab Tef Set 175x140 Set 350x280 Set 550x... Set 1000x800 Complete GOM PC system in an aluminum case (running Linux), fully configured for the GOM ATOS IIe Software on CD; steel scale bars with ATOS evaluation dongle Replacement lamp Calibration panel (aluminum) CP20/MV 350x280 mm² Please feel free to contact us if you have any questions!

Condition: used, Year of construction: 1993, pressure 630 KN distance between columns 800 mm stroke 150 mm table surface area 720x550 mm ram surface 720x520 mm dayligth 420 mm rapid drop speed 394 mm/sec working feed 71/17 mm/sec return speed 390 mm/sec adjustment movement of the stroke 120 mm total power requirement 15 kW Cutting impact dampening The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Rsdjyutwkspfx Ab Tscf Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2024, pressure 70 t throat 325 mm stroke 800 mm die cushion capacity 35 t drawing stroke 280 mm ejector stroke 240 mm rapid traverse - down 650 mm/sec working feed 58-199 mm/sec dayligth 1050 mm table surface area 900x580 mm ram surface 460x460 mm Rcodpfx Ajvn U Sxeb Tsf total power requirement 45 kW weight of the machine ca. 6,3 t dimensions of the machine ca. BxTxH 1000x2200x4000 mm

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to Rsdpfx Abou Nfine Tocf table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, controller model: Simatic S7-1500, total length: 8,480 mm, film width: 460 mm, roll diameter: 400 mm, machine/vehicle number: 20-042, production capacity: 10 unit/h, No minimum price – guaranteed sale to the highest bidder! The new price of the thermoforming vacuum packaging machine was EUR 255,000 plus VAT! TECHNICAL DETAILS Film Bottom film width: 460 mm Bottom film: Soft film PA/PE, max. 350 µm Top film width: 455 mm Top film: Soft film PA/PE, max. 100 µm Film roll diameter, top film, max.: 400 mm Film roll diameter, bottom film, max.: 400 mm Performance and format Draw length: 300 mm Thermoforming depth, max.: 190 mm Adjustable output: 7 - 10 cycles/min MACHINE DETAILS Control system Touch panel: 12" Controller: Simatic S7-1500 Operating language: German Electrical and media connections Mains voltage: 400 V Mains frequency: 50 Hz Compressed air consumption: approx. 600 - 1,250 l/min Compressed air connection: 3/4" - DN 19 Cooling water consumption: approx. 80 - 150 l/h Water connection: 1/2" - DN 13 Machine dimensions Tool spacing: approx. 3,900 mm Free infeed path: approx. 1,997 mm Machine length: approx. 8,480 mm Outfeed belt, usable length: approx. 550 mm Machine height: approx. 1,965 mm EQUIPMENT Rjdpfxszkgbye Ab Tscf Modular construction made of stainless steel Standard film rolls with a film core diameter of 3" / 76 mm Kne lever system for the forming and sealing station Memory-programmable controller with a swiveling operating terminal Fumigation system SWZ with a stainless steel tank and a storage volume of 5 liters Safety devices with magnetic and light curtain protection Automatic lubrication system for the film transport chain Outfeed belt Intralox Blue 950 mm, usable length 550 mm Format parts for several packaging and forming sizes

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm Rcedpfx Abozrpqtj Tof table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective Rcodpfszub Nmox Ab Tsf If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Redpfx Abszvykxj Tocf Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team.

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Redpfxjwih Arj Ab Tscf

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Pressure: 63t Rcodpfx Abew Slnis Tef Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production. Rcsdpfx Absx Uz Ncj Tjf