Used Demag Dkun5 - Dkun 5 (Kmk71) for sale (60,515)

Condition: used, New spare parts for DEMAG DKUN5 - DKUN 5 (KMK71) Spare parts for the repair of a DEMAG crane, chain hoist Suitable for DEMAG chain hoist DKUN5 Scope of delivery: Gedpozinw Tofx Afuokc 1x Shaft-coupling-KMK set 1x Stand set KMK / P = 12600633 1x Runner set KM71 B2 = 12845833 1x Fan set KM71 = 12882233 1x Driving dog KM71 = 12876033 1x Thrust ring set KM71 = 12885233 1x Bearing shield set KMP 71 BS = 12861433 1x Chain guide set LDKUN D5 = 83628033 1x Small parts set KMK 71 B2 = 12878533 Weight 11.5 kg G

Condition: used, Overhead crane with hoist motor and control terminal. Width: 15.5 m Height: 4.5 m (max. structural height) Depth: 7 m Condition: good, second-hand Gedpjy Hp T Tofx Afuekc

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Gkedpfxsrft Nzs Afuec Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim See pictures

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Sumitomo DEMAG Systec 170/520-600 NC 5 Year of manufacture: 2008 Control system: NC 5 Screw: 45mm Injection volume: 323ccm / 294g Clamping force: 1700KN Tie-bar spacing: 520mm x 520mm Mold height: min 275mm - max 585mm Maximum plate spacing: 1085mm Opening stroke: 500mm Ejector stroke: 160mm Gksdpfx Afez Rkmfjujc Core pull: 2x Pneumatic valve: 1x Equipment: Core pull, 2-circuit, serial to tool movement on the movable platen Pneumatic valve 5/2, No. 1, on the movable tool platen Ejector parallel to the tool movement Clamping force controlled Freely programmable inputs/outputs (3 inputs/3 outputs) 3 in/3 out, freely programmable Start/stop program (with purging) Interface for handling, Euromap 67 (50-pin) Interface for tool protection (ejector plate safeguard) Plug-in ejector plate safeguard Integrated hot runner control, 8 zones Tool protection Switch-off of tool cooling Closed-loop clamping force control Active mold protection via sensor Hydraulic screw drive, high speed Temperature control of cooling feed zone Follow-up pressure switchover WID 1 circuit Back pressure programmable Injection via DFE pump, speed closed-loop Intrusion Reduced nozzle sealing force at open mold, programmable Process data recording (PDE) with graphics and control Extended storage for process/mold data and report lists on internal memory Program for storing process data on external memory Switch-on/off program with purging Flexible clamping sequence with ejector and cores Amendment report Event history Help function, integrated hints via control Detailed hints via control Preventive maintenance program 2 freely programmable screens Intrusion 2x socket combination 380V, 230V Printer Change journal PDE control, graphics ERGOStart The machine is currently being overhauled and tested for functionality.

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Gkedpfjwlkb Nox Afuoc

Year of construction: 1995, condition: good (used), DEMAG Electric Hoist DKUN 5-500-K-V1F4 Type: Electric chain hoist Year: 1995 Chain: 3 meters Three-phase 380V Capacity: 1.000Kg 2 speeds (12,5m/min. - 6,2m/min.) Gkodpjudv Tkofx Afusc 1.7Kw

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Injection pressure: 2640 bar Dosing volume: 168 ccm Gsdpfx Afjz Ipkcsujkc Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Freight basis: ex-works Gkedowz R Iujpfx Afusc

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Gkedpfxewlkcas Afujc Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2005, machine/vehicle number: SB219Res, Demag / Erikkila Crane Ceiling Crane Runway approx. 9.6x5.5m Gedpfx Aey Hgmwofujkc Load capacity / lifting capacity 2x 500 KG - 2x 0.5t Technical data of the system: Crane runway made of 170+200mm Erikkila rails Runway length 9.6m, 2x bridges each 5.5m System will be delivered complete: Rails, rail connectors, trolleys, end plates, cable carriers, brackets/hangers, etc. incl. 2x Demag 500KG PK chain hoists (older model) lifting height approx. 3.5m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or pickup only by appointment Demag KBK1, KBK2, and KBK3 rails are stock items! Other KBK systems in stock as well. Load capacity from 125KG - 1600KG Please inquire about your required crane runway with load capacity and dimensions without obligation.

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve Gsdpfsz Iplmjx Afuokc 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: CR-Lack DK solo, Demag chain hoist crane lifting mechanism 1x 2500 kg, DKUN20-1250 K V1F4 Payload: 1x 2500 kg / 2.5 tons, lifting capacity - 2-strand 5 chain hoists available!!! With articulated trolley drive, undercarriage prepared for mounting on approximately HEA/HEB/HEM profiles (flange width 300 mm) With 2 lifting speeds, lifting height 7 m!!! With floor control Length of the lifting mechanism approximately 1.25 m Gksdozv H Htepfx Afuoc Total weight approximately 250 kg, connection to 400V 50Hz Very good condition, fully functional Item location is 75053 Gondelsheim See pictures.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Gedpszp Ew Defx Afujkc - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: used, Year of construction: 2007, machine/vehicle number: NBGMAN 1, Demag KBK1 / 2 / ALU crane canopy Crane runway with steel structure Dimensions approx. 10m x 4.6m incl. 2 bridges each 125KG payload / lifting capacity Crane runways can be operated independently of each other. Technical data of the system: Crane runway / steel structure made of HEA 140 girders Dimensions as follows: External dimensions - space requirement approx. 10 x 4.6m with overhead crane payload 2x 125KG with 2x Demag DC chain hoist Approx. dimensions: Top steel structure 5.25m Lower steel structure 4.97m Bottom running rail 4.66 / 4.78m (per crane) Bottom bridge 4.31/4.50m Hook height 3.9/4.1m Crane girder length 4 + 6.7m Internal dimension of supports 4.4m Gksdpfsr Igruox Afuoc Base plate of the prop 40x40cm Prop HEA140 Running rails HEA140 Prop spacing 4.55 + 5.1mm System is supplied complete as supplied: complete steel construction + 2x crane incl. 2x Demag DC chain hoist 125KG Used condition Crane is disassembled and immediately available Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only

Year of construction: 2014, condition: like new (used), machine/vehicle number: 20020235 UG, DEMAG ALU crane canopy Crane runway dimensions approx. 6x4m Payload / lifting capacity 250 KG - 0,25to Technical data of the system: Crane runway made of Demag aluminum rails 180mm with internal power supply System is supplied complete: Rails, rail connectors, trolleys, end plates, cable drag, brackets/hangers etc. incl. Demag DCS PRO2-250 NL 250KG chain hoist - lifting speed 0-16m / min !!! Demag DCS chain hoist 250KG (NEW PRICE 4700 Euro !) Can also be exchanged for a standard model DK2-250 to reduce costs - please inquire ! NEW CONDITION - installed in clean room ! Crane is disassembled and immediately available Gsdpfety S A Nox Afuokc Mint condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Demag KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with lifting capacity and dimensions.

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Gkedoz H Rc Dspfx Afuec

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0297, 1 Demag KBK II wall-mounted slewing crane, 250 kg load capacity / lifting capacity Outreach 5m, 250 kg load capacity with Demag DC chain hoist, 250 kg load capacity Weight incl. wall bracket approx. 300 kg Complete with chain hoist, cable track, trolley and small parts Slewing range 270° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Shipping via freight forwarder or pickup Gedpfxszv H T To Afuokc Please inquire about shipping costs, specifying the postal code.

Year of construction: 2016, condition: excellent (used), machine/vehicle number: SI25t, DEMAG hook block P DH PK DK DC Payload 25000Kg / 25t mint condition - unused Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Gkodpfx Afoupwn Usuec Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners Gedeyzylvepfx Afujkc 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: used, Year of construction: 2019, Injection molding machine, Demag El Exis 1000/1195-6300, manufactured in 2019. Gksdpjzp D Stefx Afuec

Year of construction: 2011, condition: excellent (used), machine/vehicle number: MBMA500Ausschub, DEMAG KBK - double girder extending crane - crane runway with dimensions approx. 15x5m (5m bridge + 2 central 6.5m rails) with approx. 1.5m on both sides !!! extension. Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Gkedpfju I Ur Nex Afuoc Crane runway made of Demag KBK2 rails The installation is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports, extension frame type B2/2 etc. incl. 500KG Demag DC chain hoist - lifting height approx. 5m Power supply on the long side by means of conductor rails Crane is dismantled and immediately available Running rails can be extended to length x Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Gjdpfx Afoz Dhnrjuokc Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: used, Year of construction: 2019, Injection molding machine Demag EL Exis SP 1000/1195-6300, year of manufacture 2019. Gsdpfxozxxhus Afuokc

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Gkodpfx Aozt Ih Tefuec Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Gksdpfx Afsv Uvn Iousc Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Good condition Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse