Used Demag Dst 6 Stecker 16- Polig for sale (57,813)

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Pgsdpexzqp Aefx Ai Tou -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: excellent (used), Year of construction: 2008, DEMAG System 1500/1500-16000 injection molding machine Wittmann W753C robot Year of manufacture: 2008 Clamping force: 15,000 kN (1,500 tons) TECHNICAL SPECIFICATIONS 1. Basic data - Manufacturer: DEMAG - Model: System 1500/1500-16000 - Year of manufacture: 2008 - Clamping force: 15,000 kN (1,500 tons) - Injection unit: 16000 - Additional equipment: Wittmann W753C linear robot 2. Clamping unit - Clamping force: 15,000 kN (1,500 tons) - Mounting plate dimensions (H × V): 2,150 × 1,880 mm - Column spacing (H × V): 1,500 × 1,250 mm - Minimum mold height: 700 mm - Maximum mold height: 1,400 mm - Maximum opening: 2,900 mm 3. Plasticizing unit and injection unit - Injection unit: 16000 - Screw diameter: 145 mm - Injection volume: 10,981 cm³ - Injection shot weight (PS): 9,880 g - Maximum injection pressure: 1,454 bar 4. Hydraulic and electrical system - Rated power of the pump motor: 165 kW - Heater power: 97 kW 5. Machine dimensions and weight - Length: 14,400 mm - Width: 3,400 mm - Height: 2,900 mm - Net machine weight: 74,000 kg (74 tons) Pgedpfx Aij Af Id Ho Tou - Weight of the additional unit identified in the documentation as the control cabinet: 21,000 kg (21 tons) - Total weight according to the provided data: approximately 95,000 kg (95 tons)

Condition: used, Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: Switching elements are missing, see photos -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm Pgodpfxoxzq Sqe Ai Teu -Weight: 3.5 kg

Condition: used, Year of construction: 2011, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, injection pressure: 1,914 bar, injection weight: 294 g, mold height (min.): 275 mm, ejector force: 59,000 N, ejector stroke: 160 mm, total length: 5,410 mm, total width: 1,660 mm, total height: 2,140 mm, overall weight: 7,090 kg, Used Sumitomo (SHI) Demag Systec 160/520-600 injection molding machine, manufactured in 2011. Technical specifications: - Clamping force: 160 t (1600 kN) - Injection unit: 600 - Screw diameter: 45 mm, L/D 20 - Specific injection pressure: 1914 bar - Injection volume: 323 cc - Injection shot weight: 294 g - Cylinder heater power: 11.3 kW - Tool plate dimensions: 770 x 770 mm - Distance between columns: 520 x 520 mm - Tool height (min.): 275 mm - Opening stroke: 500 mm - Maximum distance between plates: 1085 mm - Ejector force: 59 kN - Ejector stroke: 160 mm - Weight: 7090 kg - Dimensions (L x W x H): 5.41 x 1.66 x 2.14 m - Control system: NC5 Equipment: - NC5 control system with color screen - Screw Ø 45 mm, L/D 20 - 5-zone hot runner control - Air blow valve on the moving platen - Clamping force adjustment - Active mold protection (activeProtect) - Demag robot interface Pedpoz T Iufsfx Ai Togu - WC5 remote service - Process data logging and statistics - Reinforced oil cooler

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,548 h, clamping force: 1,600 kN, screw diameter: 45 mm, injection weight: 294 g, overall weight: 6,983 kg, Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details. • Tie bar distance: 520 mm • Injection unit: 600 • Control: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar • Shot volume: 294 cm³ • Shot weight (PS): 254 g Pedpfezbh Epex Ai Togu • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l • Pump drive: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Max pressure: 190 bar • Platen size: 770 x 770 mm • Max mold weight: 1300 kg • Max opening stroke: 500 mm • Min/Max mold height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Condition: ready for operation (used), Year of construction: 2005, clamping force: 1,600 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2005. This DEMAG Ergotech Extra 160-430 features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It has a screw diameter of 45 mm and accommodates molds with a maximum height of 585 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech Extra 160-430 machine we have for sale. Contact us for further details. • Space between columns: 520 x 520 mm • Maximum mold height: 585 mm • Minimum mold height: 275 mm • Maximum injection volume: 259 cm³ • Maximum injection pressure: 1,600 bar • Centering ring: 160 mm • Hot runners in the machine: 8 Pgodpez Ibikjfx Ai Tju • Core puller: 1 • Pneumatic valves: 2 • Programmable inputs: 2 Additional equipment • Hiltectro V-1000 IS robot (MY: 2020) • Belt conveyor with safety enclosure

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information. Additional information • Screw Diameter: 50 mm Podpfex D Nxzsx Ai Tsgu • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8673 0023, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, plate width: 1,880 mm, plate height: 2,150 mm, Regularly maintained machine - see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting plate dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between columns (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm - 1,400 mm Maximum opening distance: 2,900 mm Control: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Rated power of pump motor: 165 kW Pgjdpfxey T Hy Dj Ai Tju Heating power: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 t Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and tube 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 new 2017: Injection cylinder BS piston rod new with seals 2017: Circulation pump oil cooler replaced 2017: Teachbox replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil change 2019: New injection valve 2019: Dosing inverter overhauled by Fa. Eichler 2021: Motor P1 new 2022: New RSP EQUIPMENT - Wittmann W 753 Robot - 2008 - Cage and conveyor belt

Condition: reconditioned (used), functionality: fully functional, Demag wire rope hoist P632 H-8 2/1 6.3 Ton Includes trolley with RS125 wheel blocks, 30 mm spline shaft Pgodpfx Aiewv Rt Ts Tsu Main hoist 28/12K4P Fine hoist FG28 16/7P-4 Includes 2 trolley drives AFL04 / KBV71 A-8/2 Includes bottom block 2/1 6.3 Ton Includes remote control DST6/7 Condition: workshop refurbished

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2016-08-30, total length: 2,100 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 2,500 kg, CONGDA 16/16/6 Counter-Pressure Filling Machine – up to 3,500 bottles/hour For sale: a CONGDA 16/16/6 bottle filling machine, manufactured in 2016. The machine underwent a complete overhaul in April 2026, which included replacing bearings, seals, springs, and other wear parts. In addition, the machine has been technically improved in several areas since it was put into operation. During this process, various original components were replaced with high-quality parts from European manufacturers. Technical specifications - Manufacturer: CGET (China) - Year of manufacture: 2016 - Configuration: 16/16/6 (rinsing / filling / capping) - Filling system: Counter-pressure filler - Filling capacity: Up to 3,500 bottles per hour, depending on factors such as carbon dioxide content and temperature - Bottle format: Set for 33 cl Longneck bottles - Weight: Approximately 2,500 kg - Documentation: Technical documentation available Podpfx Aisz Nlcxo Tsgu Complete overhaul in April 2026 In April 2026, the machine underwent an extensive technical overhaul. During this overhaul, the following parts, among others, were replaced: - Bearings - Seals - Springs - Various other wear parts Additional technical improvements Since it was put into operation, the machine has been further optimized in several areas. Various original components have been replaced with parts from European manufacturers. The most important improvements are: - Replacement of the vacuum pump - Replacement of all sensors - Installation of a digital pressure gauge on the filling bowl - Replacement of various parts of the rinser - Replacement of the capping dies - Various other technical improvements As a result of these modifications, the machine has been technically improved in several key areas compared to its original configuration. Additional items included The machine comes with a comprehensive package of extra parts, including: - Various chain conveyor parts - Large quantity of spare parts - Extra seals - Springs - Filling tubes - Various other technical parts and wear parts Asking price: €34,900,- excluding VAT Location: Breda More information, photos, and videos are available upon request.

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair End carriage DRS315 Hoist unit EZ DR20 Trolley gauge 2240 mm Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Pgsdpfx Aiow H S Avj Tsu Complete with documentation and HBC Spectrum radio remote control. All motions with frequency inverter! Modifications can be offered separately.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: CR-Lack, Demag Tandem Chain Hoist Crane Lifting Unit 2x 2500kg DC-Pro 16-2500 H6 V6/1.5 Pgedpfx Ajzh U Nyoi Tsu Load capacity 2x 2500kg / 2.5t load capacity / lifting capacity - 2-strand - total lifting capacity 5000kg - 5t 7x DC double chain hoists available!!! 5x DK double chain hoists available!!! with articulated trolley drive, chassis prepared for mounting on approx. HEA/HEB/HEM beams (flange width 300mm) with 2 lifting speeds, lifting height 6m!!! incl. HBC radio remote control Length of the lifting unit approx. 2.5m Total weight approx. 600 kg, connection to 400V 50Hz Very good condition, fully functional Item location is 75053 Gondelsheim See pictures

Condition: good (used), functionality: fully functional, 3 DEMAG single-rail traveling hoists, complete, all identical in design Pjdev Uvu Uspfx Ai Tsgu with DEMAG hoisting unit, type DH316 H12 with hoisting motor KBH140 B2/12 Gear ratio i=85 Hook travel 6m Main lifting speed 6.3 m/min Fine lifting speed 1 m/min Load capacity 6.3 tons Reeving 4/1 very good used condition, price per unit 3 units for €13,900.00 net numerous hoisting units in stock Info: we have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Also, check out my other offers from my stock!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals Pedpfoxup T Hsx Ai Tegu 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: excellent (used), Year of construction: 2017, operating hours: 34,007 h, functionality: fully functional, Equipment: documentation/manual, DEMAG 280 ton injection molding machine Pedpfx Aie Ad Ii Ao Togu

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable Pjdpfxjxzq Raj Ai Tjgu -Type: DST 3 -Connector: 6-core cable -Transport dimensions: 520/240/H140 mm -Weight: 2.1 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Podpfx Aijxzq Hzj Tjgu -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 3 -Connector: 6-core cable -Transport dimensions: 480/300/H130 mm -Weight: 2.1 kg

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Podjwz R Iujpfx Ai Tsgu Delivery time: by arrangement Freight basis: ex-works

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Pgodpfowlkcajx Ai Tsu Payment terms: 100% before takeover of the machine, net

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) Pgedpszhtfmefx Ai Teu with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim See pictures

Year of construction: 2014, condition: like new (used), machine/vehicle number: 20020235 UG, DEMAG ALU crane canopy Crane runway dimensions approx. 6x4m Payload / lifting capacity 250 KG - 0,25to Technical data of the system: Crane runway made of Demag aluminum rails 180mm with internal power supply System is supplied complete: Rails, rail connectors, trolleys, end plates, cable drag, brackets/hangers etc. incl. Demag DCS PRO2-250 NL 250KG chain hoist - lifting speed 0-16m / min !!! Demag DCS chain hoist 250KG (NEW PRICE 4700 Euro !) Pgedpfety S A Nsx Ai Teu Can also be exchanged for a standard model DK2-250 to reduce costs - please inquire ! NEW CONDITION - installed in clean room ! Crane is disassembled and immediately available Mint condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Demag KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with lifting capacity and dimensions.

Condition: reconditioned (used), functionality: fully functional, power: 13 kW (17.68 HP), rotational speed (max.): 955 rpm, KBA160 B-6 Condition: Fully overhauled / price on request Pjdpfxszqtd Uj Ai Tjgu Brake: Heavy conical ED: 40% 13 kW 36 A 955 rpm Long shaft version 380 / 50 Hz

Condition: excellent (used), functionality: fully functional, DEMAG traveling hoist, 3.2 tons, complete with PLV168 hoisting unit in good condition, ready for immediate use DEMAG slip ring motor 36/24 S4 GÜ Fine-pitch gearing FG36 19K or Fine-pitch gearing 72 DFg reconditioned or hoisting motor 36/24 K6P Psdpfxowafido Ai Tsgu 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! DEMAG parts warehouse

Condition: used, Year of construction: 2018, Machine no. 55, serial no. 80430240, NC 5 control system, maximum clamping force 2,800 kN, conveying device, manufacturer Colortronic, tool control unit, manufacturer Altanium, handling system, manufacturer Sumitomo Demag, type Industrial Robot, serial no. SDR22S, year of manufacture 2018, maximum load capacity 36 kg, safety fence, conveyor belt, length/width approx. 2,200 x 500 mm. Pgedpez H N Ncjfx Ai Teu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2 x 5,000 kg – Lifting height: 11.35 m – Year of manufacture: 2021 – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 Pgodpfx Aoyvr Huoi Tou – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition – Disassembled: yes, available immediately – Excluding rotating carousel