Used Demag Trusses With Pulleys for sale (1,734)

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Bledozh N Tyjpfx Ahmsn terms of payment: 100% prior to delivery

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: 6 pieces diameter 180 mm. / inside 40 mm. 2 pieces - 260 mm. / 45 mm. 6 pieces - 260 mm. / 90 mm. 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm. Bodpfeu U Rayjx Ahmeln

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Bljdez Hlx Hjpfx Ahmjn Length: 36.50 m Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Drive motor 1 Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bljdpsymqz Rjfx Ahmsn

Condition: used, Crane hook, lifting clevis, bottom clevis for chain hoist Hook clevis, load hook DEMAG, 2-strand Suitable for PK10 Load capacity: 2000 kg Demag No.: 56236044, replaced by Demag No.: 64755304 For two load strands Chain nominal dimensions: 10.0 x 28.0 mm Chain pitch for 1 chain link: 28 mm Chain pitch for 11 chain links: 208 mm Wire thickness = nominal thickness: 10 mm Outer dimension, transverse: approx. 34 mm Inner dimension, longitudinal: approx. 28 mm Outer dimension, longitudinal: approx. 48 mm Blodpfxey Tptme Ahmen Self-weight: 6.6 kg Very good condition, from stock

Condition: new, DEMAG traverses with rope pulleys for P Train / DR / MDR / DH Blodpfeu U Nhvsx Ahmen

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Bsdpfx Ahewlkb Nsmjln Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Bljdpfevvtx Tex Ahmsn Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Condition: used, Year of construction: 2018, Machine no. 55, serial no. 80430240, NC 5 control system, maximum clamping force 2,800 kN, conveying device, manufacturer Colortronic, tool control unit, manufacturer Altanium, handling system, manufacturer Sumitomo Demag, type Industrial Robot, serial no. SDR22S, year of manufacture 2018, maximum load capacity 36 kg, safety fence, conveyor belt, length/width approx. 2,200 x 500 mm. Bsdpez H N Ncjfx Ahmeln

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Blodpfx Ahsz H Rc Domsn

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Bodpfx Aowlkcashmsln Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Bjdpfx Aewz R Iuehmeln Freight basis: ex-works

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0297, 1 Demag KBK II wall-mounted slewing crane, 250 kg load capacity / lifting capacity Outreach 5m, 250 kg load capacity with Demag DC chain hoist, 250 kg load capacity Weight incl. wall bracket approx. 300 kg Complete with chain hoist, cable track, trolley and small parts Slewing range 270° Bledszv H T Topfx Ahmsn Item location is 75053 Gondelsheim System is completely disassembled and immediately available Shipping via freight forwarder or pickup Please inquire about shipping costs, specifying the postal code.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,100 g, mold height (min.): 380 mm, ejector force: 96,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,200 mm, total length: 8,020 mm, total width: 2,210 mm, total height: 2,570 mm, overall weight: 21,000 kg, Closing force: 420 t Year of manufacture: 2015 Injection weight: 1,100 g Injection unit 2300 Screw diameter: 70 mm Screw L/D ratio: 20 Specific injection pressure: 1877 bar Injection volume: 1212 ccm Injection weight: 1,100 g Pump motor power: 51 kW Cylinder heater band power: 27 kW Closing unit Closing force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Mold height: 380 - 825 mm Opening stroke: 770 mm Maximum mold distance: 1595 mm Ejector force: 96 kN Ejector stroke: 230 mm Bedpez E Imwofx Ahmoln Weight: 21,000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Control: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the stationary platen) - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-controlled activeDrive hydraulic pump (energy-efficient) - Adjustable p+v injection in a closed-loop system - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Closing force adjustment - activeProtect mold protection - Switching to pressure-dependent clamping (WID) - PDE process data recording, 100% control - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fence included

Condition: used, Year of construction: 2007, machine/vehicle number: NBGMAN 1, Demag KBK1 / 2 / ALU crane canopy Crane runway with steel structure Dimensions approx. 10m x 4.6m incl. 2 bridges each 125KG payload / lifting capacity Crane runways can be operated independently of each other. Technical data of the system: Crane runway / steel structure made of HEA 140 girders Dimensions as follows: External dimensions - space requirement approx. 10 x 4.6m with overhead crane payload 2x 125KG with 2x Demag DC chain hoist Approx. dimensions: Top steel structure 5.25m Lower steel structure 4.97m Bottom running rail 4.66 / 4.78m (per crane) Bottom bridge 4.31/4.50m Hook height 3.9/4.1m Crane girder length 4 + 6.7m Internal dimension of supports 4.4m Base plate of the prop 40x40cm Prop HEA140 Running rails HEA140 Prop spacing 4.55 + 5.1mm System is supplied complete as supplied: complete steel construction + 2x crane incl. 2x Demag DC chain hoist 125KG Used condition Crane is disassembled and immediately available Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Bljdpfx Ahsr Igrujmen

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system Bledsrr Ehmepfx Ahmjn - removed from running machine - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: MIKA212, Technical specifications: 1x Demag KBK 1 column-mounted slewing crane, capacity 125 kg, with Demag DC chain hoist, 125 kg Useful load at full extension: 125 kg Height: approx. 3.5 m UK jib length: approx. 3.05 m Bledjzv H Uqopfx Ahmon Outreach: 2.5 m Hook height: approx. 2.65 m Total weight: approx. 350 kg Including 125 kg Demag DC chain hoist (older model) Includes bolts, cable carrier, carriage, end cap, etc. Includes anchor plate 60x60 cm Slewing range: 300°, connection to 400V 16A Crane is dismantled and immediately available. Item location: 75053 Gondelsheim Other cranes are available, with load capacities ranging from 80-5000 kg. Please inquire. See images. Shipping via freight forwarder or collection by appointment only.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MIKAOG1+2, 1 Demag KBK II wall-mounted slewing jib crane, 80 kg safe working load / lifting capacity Crane available 2x! Bedsx U Nqbjpfx Ahmeln Jib length 3m, 80 kg capacity With Demag DC chain hoist, 80 kg capacity Weight incl. wall bracket approx. 150 kg Complete with chain hoist, festoon system, trolley, and small parts Slewing range 270° Item location is 75053 Gondelsheim Unit is completely dismantled and immediately available Shipping via freight forwarder or collection Please inquire about shipping costs based on ZIP code

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,250 h, clamping force: 13,000 kN, screw diameter: 110 mm, injection weight: 5,200 g, Hydraulic injection moulding machine manufactured in 2007. This DEMAG D 1300 features a clamping force of 1300 t and an injection weight of 5200 g. It includes a handling system with a Wittmann DR 853 robot, offering impressive Z, Y, and X-axis strokes of 3500 mm, 2500 mm, and 1600 mm respectively. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 1300 machine we have for sale. Contact us for further details. - Control Brand / Model: Demag NC4- Hydraulic Core Pulls: 4- Hydraulic Cascades: 12- Hot Runner Control Zones: 32- Handling System / Robot: Wittmann DR 853 227 (YOM 2014)- Robot Z-Axis Stroke: 3500 mm- Robot Y-Axis Stroke: 2500 mm- Robot X-Axis Stroke: 1600 mm- Robot C-Axis: 90°- Robot B-Axis: Servo 270°- General Condition: Very good overall condition, annual maintenance performed, currently under power / in series production Blsdpfez E Hh Hjx Ahmen

Year of construction: 2004, condition: excellent (used), machine/vehicle number: BN320Ausschub, DEMAG KBK - Single girder extending crane - Crane runway with dimensions approx. 8m + 1.5m (8m monorail + 1 central 5.5m rail) with approx. 1.5m extension. Payload / lifting capacity 320KG Technical data of the system: Crane runway made of Demag KBK2 rails The installation is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports, extension frame type B2/2 etc. incl. 320KG Demag DK chain hoist - lifting height approx. 3m Power supply on the long side by means of internal conductor rails (KBKII-R) Crane is disassembled and immediately available Running rails can be extended to length x Blodpeu I U Anjfx Ahmon Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged Bjdpoh Nv Itofx Ahmoln manufacturer: Demag Dition: gebraucht

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Bodpfxsygk Eij Ahmeln

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Bedpfx Aozbg Ezehmeln Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: excellent (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: ERGOTECH 200 - 840, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, mold height (min.): 340 mm, plate width: 860 mm, plate height: 860 mm, pump power: 30,000 W, The machine is fully operational and was working with injection until the end. Bedpsyxn Tvefx Ahmjln

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Bedpfezq A Ipex Ahmeln