Used Diaform Diaform Device Generally Overhauled for sale (22,547)

Year of construction: 2021, condition: refurbished (used), Refurbished DIAFORM unit f. JUNG HF50 / JF 520 Gusdpfx Alshcn R Isxeb

Condition: used, Gulmay CP225-1/29 X-Ray Device – Radiographic Irradiation Unit Gujdpjy Akczefx Alxjb Maximum Power: 3200 W kV Range: 20 – 225 kV kV Accuracy: ± 1% of set value kV Reproducibility: Better than ± 0.05 kV High Voltage Ripple: Less than 5.0 V/mA with 10M high-voltage cable mA Range: 0 – 30 mA mA Accuracy: ± 0.5% of set value mA Reproducibility: Better than 2 μA Input Voltage: 220 V ±10% 47 – 63 Hz Input Current: 27 A at 220 V Output Connector: R30 Cathode Dimensions (W x H x D): 435 x 780 x 818 mm Storage Temperature: -40°C to +70°C Operating Temperature: 0°C to +40°C Relative Humidity: 95% Duty Cycle: 100% Comms: Analog / RS232 / RS422 You are welcome to arrange an appointment for viewing. We are happy to organize low-cost shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is available. Sale subject to prior sale. Visit our shop and see our other offerings. The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications or errors in the item description may occur and are subject to change.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: DOCAT 70, We offer this used ozone generator and abatement device Tonello ECOFREE 2, year of manufacture 2018. Machine type: DOCAT 70 Power supply: 3Ph+GND Voltage and frequency: 400V-50Hz Compressed air pressure: bar Hydraulic pressure: bar Gujdsyvzznjpfx Alxob Maximum steam pressure: bar Weight: 300 kg Drum volume: l Serial number: 07758 Year of manufacture: 2018 Installed power: 4 kW Maximum peak current: 7 A Maximum operating current: 3 A Power cable cross section: 4 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2021, condition: refurbished (used), Spindle motor overhauled for JUNG HF50 / JF520 electrically overhauled / newly mounted and balanced Gedshcn Spopfx Alxjub exchange delivery possible, depending on availability

Condition: new, Year of construction: 2025, DPF MASTER FLASH PROFESSIONAL™ A professional device for regenerating DPF/FAP/GPF filters and catalytic converters designed for passenger and delivery vehicles. It has a 185-liter tank, a pump with a capacity of up to 133 L/min, and an integrated drying system. The machine's interior is made of stainless steel (AISI 304) and acid-resistant steel (AISI 316). The cleaning technology operates in a closed-loop system using a hydrodynamic method. The device allows for filter contamination measurement both before and after regeneration, with results displayed in mbar. It features an integrated drying system with temperatures up to 100°C. After regeneration, a final backpressure measurement is taken and provided to the client as a printed report. This comprehensive cleaning process can restore the filter’s factory settings up to 99.9%. Components from leading European manufacturers have been used in the machine’s construction, ensuring the highest quality and reliability. TECHNICAL DATA: • Weight 600 kg • External dimension (L x W x H) 210 x 106 x 215 cm • Chamber dimension 140 x 69 x 107 cm • Tank capacity: 185 litres • Operating pressure 6-8bar • Maximum power 10 kW • Water inlet connection 1/2" • Water outlet connection 6/4" Gedpfjgllwisx Alxoub • Airflow: up to 390 m3 • Frequency 50 Hz • Hypertension up to 340 mbar • Safety features: temperature sensor, pressure sensor, door opening sensor, emergency safety switch EQUIPMENT: • 7″ color touch screen • sensors: liquid level, liquid and air temperature, pressure flow, door opening, disappearance and phase sequence • protections: emergency safety switch, end protections of the chamber door • filter contamination measuring system • AISI 316 stainless steel chamber • extended 3-stages liquid filtration system • integrated drying system in a smooth temperature range from 70 to 100 ° C • cooling the drying system • integrated thermal printer for printing filter parameters • Ethernet controller for remote diagnostics • set of connection adapters for DPF / FAP / GPF / KAT / SCR filters • starter kit for consumables (a set of filters + 2L XTON DPF Cleaner detergent) • liquid tank with a capacity of up to 185 liters • extended 12-month manufacturer’s warranty (optional 24 or 36 months) ADDITIONAL OPTIONS: • automatic double-sided filter cleaning • a second fluid circuit with an additional pump • thermal insulation of the liquid tank • automatic liquid top-up • automatic dosing of chemicals • quick-X filter mounting system • EURO5 and EURO6 adapter

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. Guedpfx Ajgllxgjlxeb TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency safety switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator - Programmable controller for automatic cycle operation - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L)

Condition: new, Year of construction: 2025, total width: 2,100 mm, total length: 1,260 mm, total height: 2,150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all types of vehicles. The machine is equipped with a 275-liter tank, a high-pressure pump with a capacity up to 250 l/min, and an integrated filter drying system. The Master Flash technology utilizes the full benefits of the hydrodynamic method, restoring filter efficiency up to 99.9% compared to the new one. It is completely safe for the monolithic structure of DPF filters. Properly adjusted parameters ensure that PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals are thoroughly removed, maintaining the filter's factory characteristics. The pump with chemical sealing and electronics based on components from leading European manufacturers guarantee the highest quality and reliability. The machine is equipped with a filter contamination measurement system (backpressure measurement) and an integrated filter drying system with a temperature range of 70 to 130 degrees Celsius. The filtration system, expanded with a pre-cleaning filter, significantly extends the lifespan of the main filters. Master Flash technology, combined with the unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5 particles, carbon deposits, oil, cerium, and heavy metals without mechanical interference with the filter structure, restoring its factory performance to 99.9%. TECHNICAL SPECIFICATIONS: * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank capacity: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Max power: 12 kW * Frequency: 50 Hz * Water inlet connection: 1/2” * Water outlet connection: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen • Sensors: liquid level, liquid and air temperature, pressure flow, door opening, phase loss, and phase sequence • Filter contamination measurement system Guedpfx Ajgllkaelxeb • Chamber made of stainless steel AISI 316 • Extended 4-stage liquid filtration system • Two heaters • Integrated drying system with a temperature range from 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote diagnostics • Set of connection adapters for DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapter • Starter kit of consumables (complete set of filters + 2L XPOWER DPF Cleaner detergent) • Extended 12-month manufacturer warranty (optional 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS - CONTACT US FOR MORE INFORMATION.

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation Gsdpfx Asxvp S Ejlxeub -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: used, Technical details: base plate: 210x110 mm weight of the machine approx.: 60 kg space requirements of the machine approx.: 0,7x0,52x0,5 m copy device for grinding machines for grinding wheel forming ( profile device) details: - adjustment travel upper table longitudinal=60mm (manual) - transverse travel = 20mm - under frame=approx. 60mm ( lockable) - template table size 310x150mm Gedpfx Alsu Nuq Ijxoub perfect used condition *

Year of construction: 1998, condition: used, functionality: fully functional, (USED) General Cargo Container in Steel, approximate measurements 12 m long x 2.30 m wide x 2.30 m high, Year 1998. Please Inspect. DOES NOT INCLUDE CONTENTS, DELIVERY WILL BE MADE WHEN THE CONTAINER IS EMPTY (USADO) Contenedor de carga General en Acero, medidas aproximadas 12 m de longitud x 2.30 m de ancho x 2.30 m de altura, Año 1998. Favor de Inspeccionar. NO INCLUYE CONTENIDOS, LA ENTREGA SE REALIZARÁ AL VACÍAR EL CONTENEDOR Godpoy Sirgjfx Alxsub

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Goderuakgepfx Alxsub Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Gusdjxaqa Sjpfx Alxeb Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Godpsxdfazefx Alxjub Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Godpfx Aexdfa Uelxjub Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Guedsrtrykopfx Alxjb Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, This listing is for the Peak Scientific Corona Nitrogen Generator 1010 paired with the Corona Air Compressor. The unit is in full working condition and is ready for immediate release. System Details: The Peak Scientific Corona Nitrogen Generator 1010, paired with the Corona Air Compressor, is engineered to meet the demands of labs requiring high-purity nitrogen, specifically designed for applications like chromatography. The Corona 1010 is ideal for the Thermo Scientific Corona Veo Charged Aerosol Detector and is also suitable for LC, HPLC, and UHPLC applications, providing nitrogen flows up to 5 L/min at 80 psi. Key Features: Gujdpfxsxwc Iio Alxjb Maximum Gas Flow: 5 L/min Maximum Output Pressure: 80 psi (5.5 bar) Maximum Purity:

Condition: used, Year of construction: 2026, fuel type: diesel, motor manufacturer: NEF45SM3, Field of application: Construction Empty weight: 1.656 kg Generator capacity: 63 kVA Dimensions of cargo space: 275 x 110 x 190 cm Frequency: 50 Voltage: 230 Water tank volume: 390 l Gedpfxey Skqqs Alxeub Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: new, Year of construction: 2025, machine/vehicle number: H02F1Q0001, motor manufacturer: Battery System: LiFePO4, Field of application: Construction Empty weight: 670 kg Generator capacity: 15 kVA Dimensions of cargo space: 104 x 109 x 116 cm Gusdpfoxmwmrsx Alxsb CE mark: yes Frequency: 50/60 Voltage: 400 Drill equipment: Battery, Control Panel Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel

Condition: new, Year of construction: 2025, power: 260 kW (353.50 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 5.787 kg Functional Generator capacity: 260 kVA Dimensions of cargo space: 278 x 185 x 228 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Guedpew A Haiefx Alxeb Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 3.701 kg Functional Generator capacity: 125 kVA Dimensions of cargo space: 225 x 135 x 225 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = Gedpow A E U Ssfx Alxoub - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 72 kW (97.89 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 3.000 kg Generator capacity: 72 kVA Dimensions of cargo space: 160 x 110 x 160 cm CE mark: yes Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Please contact Team DPX for more information Gusdpjuid Awefx Alxob = Additional options and accessories = - Battery - Control Panel

Condition: new, Year of construction: 2025, power: 300 kW (407.89 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 9.424 kg Functional Guedpfjw A Havex Alxjb Generator capacity: 300 kVA Dimensions of cargo space: 465 x 230 x 250 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 834969 001, General information Field of application: Construction Weights Empty weight: 1.574 kg Functional Generator capacity: 825 kVA Dimensions of cargo space: 137 x 101 x 79 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Gsdowvdwlspfx Alxeub Other information Generator: TAL-A49 Frequency: 50 Voltage: 400 Additional information Please contact Team DPX for more information

Condition: new, Year of construction: 2025, power: 500 kW (679.81 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 14.240 kg Generator capacity: 500 kVA Dimensions of cargo space: 465 x 230 x 250 cm Gusdpfew A Hbgox Alxjb CE mark: yes Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 400 kW (543.85 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Gujdpfew A Ha Nox Alxeb Weights Empty weight: 12.000 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 465 x 230 x 250 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank