Used Dieffenbacher De 63/Sh/A for sale (78,242)

Condition: used, Year of construction: 1979, pressure:63 t Codscxxmkepfx Ahmshc throat:315 mm stroke:200 mm power capacity:15 kW piston stroke:200 mm :450 mm table-size:710 X 630 mm dimension of ram:710 X 630 mm return capacity:1,3 t closing speed:210 mm/min return speed:210 mm/sec total height over floor:2500 mm length in width:1000 mm depth:1600 mm motor speeds::1500 u7MIN: voltage:380 V control voltage:220 V weight of the machine ca.:5 t

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Chsdpfx Ahed Ih Nrjmec Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Condition: used, Year of construction: 1979, Press force: 1000 t Stroke: 350 mm Frame width: 3030 mm Side frame opening: 1450 x 1400 mm Chedpfxezyl Anj Ahmoc Shut height (stroke up): 1400 mm Table area: 3000 x 2000 mm Table height above floor: 430 mm Ram area: 3000 x 2000 mm Downstroke speed: 300 mm/s Upstroke speed: 340 mm/s Note: The machine is partially disassembled and currently in storage.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 930853, WAB Turbula T2C from 1993. Chedpez Dx N Tofx Ahmjc The mixer is in very good condition and was serviced by WAB in August 2026. During the service, the circular belts, flat belts, both tensioning pulleys, and the rubber tensioners were replaced with new ones. In addition, the following items are included as new: - 1 set of black rubber tensioners - 2 sets of red rubber tensioners (for heavier loads) - 1 mixing container, 1 liter - 1 mixing container, 2 liters Furthermore, the original operating manual from WAB and the maintenance log from 08/26 are included.

Year of construction: 2017, condition: used, Working width: 2500mm, an on-site inspection is possible, not under power. Chsdpezy Rvyefx Ahmsc

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm Chsdpfx Aszzrmpohmjc - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Chsdpfx Ahsz Hq Akemjc Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick Cedszkbn Uopfx Ahmshc - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 11,655 h, functionality: fully functional, machine/vehicle number: 11421, COMPLETE CONFIDENTIAL DOCUMENTS SHREDDING & BALLING PLANT Built by: - sorting table Chjdpszhu Atjfx Ahmsc - infeed belt conveyor 8000x1000 mm; including infeed belt conveyor - VECOPLAN shredder VAZ1300MK; includes screen according to actual confidential shredding DIN norm - Outfeed combined screw and chain conveyor, conveying to the press baler - press baler IMABE H-80/50 - Dust exhaust & filtering system - Electrical cabinet for fully authomatic operation Includes: - Full internal cabling - Machines revised with new wear parts for the shredder - Dismantled - Loading into trucks

Condition: used, Year of construction: 1997, Electric air purifier The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Cjdpfx Asyqux Uehmshc If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-2180-PPV-A-B-KF-SH LINEAR ACTUATOR Csdpfjtwqtbsx Ahmshc Pressure: 2…8 bar. Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2016, Machine No. 14, Serial No. 238835, Arburg Selogica control system, clamping force 2,500 kN, screw diameter 45 mm, handling system, manufacturer Arburg, type Multilift Select, year of manufacture 2016, travel distances X/Y/Z 700 x 1,200 x 2,400 mm, safety enclosure, handling robot, manufacturer Kuka, type KR10R1100, year of manufacture 2016, serial no. FA2686, 2 conveyor belts, manufacturer Schuma, L/W approx. 2,000 x 800 mm. Cedpfez H N H Isx Ahmohc

Condition: new, Year of construction: 2023, New machine Chedpfow I U Hmex Ahmoc Year of manufacture: 2023 Technical data: Working width: 630 mm 4-knife planing cutterhead system TERSA, d=120mm: 4,800 rpm Max. chip removal during jointing according to CE: 8 mm Min./max. thickness setting: 3/310 mm Min. workpiece length: 250 mm Feed speed: continuously variable, 6 - 20 m/min. Motor 380 Volt / 50 Hz: 7.5 kW Sound pressure level according to EN 27960: 86 - 90 dB(A) Standard equipment: Thickness table adjustment via 4 trapezoidal threaded spindles Electromotoric thickness table lift with electronic positioning device (input of the planing height via keyboard with electronic display) Electrical system according to CE with magnetic brake Protective switch Emergency stop switch Safety switch for cutterhead cover Thickness table extension 600 mm Dust extraction port d=150mm Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Codpfx Asyc S Htohmohc Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: used, Year of construction: 2011, operating hours: 300 h, functionality: fully functional, type of input current: three-phase, power: 30 kW (40.79 HP), input voltage: 400 V, filling opening width: 1,350 mm, filling opening length: 1,035 mm, Used DECOVAL 4-shaft industrial shredder (Year 2011). Designed for efficient processing and shredding of plastic waste materials. Heavy-duty 3.25-ton machine equipped with two 11 kW shredding motors and two 4 kW pusher/feeder motors (total power 30 kW). Operated by a Siemens LOGO PLC, which controls automatic reverse/anti-jamming cycles. Comes complete with the original, comprehensive technical operation and service manual. Cjdpfjzqy Hiex Ahmshc

Condition: used, functionality: fully functional, FESTO DGPL-40-1250-PPV-A-B-KF-GH-SH Linear actuator. Good working condition. Chodpfx Ajtwqrwohmjc Please check out our other listings as well.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press Chodpfx Ahjv E Nlzomsc A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Chedpfx Aei El Ucshmjc

Condition: ready for operation (used), Year of construction: 2006, clamping force: 2,500 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details. Cedsz Dal Ajpfx Ahmjhc • Tie-bar spacing (space between columns): 630 x 630 mm • Maximum mold height: 900 mm • Minimum mold height: 300 mm • Maximum injection volume: 195 / 140 cm³ (for 45 / 35 mm screw) • Maximum injection pressure: 2,470 bar • Centering ring: 160 mm • Hot runner control: 3 zones • Core puller: 1 Additional equipment • Robot: Arburg Multilift H • 2x Moretto electric loader, Safety cage, Conveyor belt, Rotary table • 2x dryers with intake ducts are available for extra 1000€

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, pressing force: 1,250 t, stroke length: 630 mm, table width: 1,270 mm, table length: 1,250 mm, overall weight: 70,000 kg, working height: 900 mm, Equipment: safety light barrier, Dieffenbacher P0-F 1250A press A press in very good technical condition, available for sale from a stamping shop that is being closed down in Poland. Modernized in 2016. Features a new Simatic S7 control system and a new electrical cabinet. Optical barriers have also been installed. Chjdpfxev E Rihe Ahmoc

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Csdpfjlc N R Dex Ahmohc

Condition: new, - NEW - General features and technical data: - 4-knife helical cutterhead, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal screws - Chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Dust extraction port 150 mm - Electrical components and safety devices in accordance with CE standards Chodpfxozd Hcko Ahmec Features and technical data SP 63 A: - Planing width: 630 mm - Motor: 50 Hz, 5.5 kW / 7.5 HP - Infinitely adjustable feed rate from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (input of the planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Includes: - Motor with 7.5 kW / 10 HP, incl. automatic star-delta starter Order No.: 04/03 & 61/10 - Extension for thickness table, 600 mm Order No.: 70/03 - Cutterhead system TERSA, incl. reversible knives Order No.: 28/03 - 1 rubber infeed roller & 2 rubber outfeed rollers 630mm

Condition: good (used), functionality: fully functional, Year of construction: 2008, TRUMPF TruMatic 7000 – 1300 Chodpfxjz Dumzj Ahmoc Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: excellent (used), Year of construction: 2012, operating hours: 37,830 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, ARBURG Allrounder 630 S 2500-800 Stock No.: 503409 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control System: Selogica Year of Manufacture: 2012 Operating Hours: 37830 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing h x v: 630 x 630 mm Platen Size h x v: 900 x 900 mm Minimum Mold Height: 300 mm Maximum Mold Height: 700 mm Maximum Platen Distance: 1300 mm Opening Stroke: 600 mm Ejector Stroke: 225 mm Ejector Force: 90 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Technical Data – Injection Unit Screw Diameter: 50 mm Displacement Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 1000 N Free Injection Flow Rate: 300 g/s PS Number of Heating Zones: 8 Nozzle Distance: 400 mm Chodpsz A Tgkjfx Ahmec Dimensions & Weight Machine Dimensions L x W x H: 6.4m x 1.95m x 2.21m Total Weight: 12140 KG Equipment Screen text in German Screen text in English CEE socket 16A Compact Flash interface for data set storage Hydraulic core pull 1x Air valve 2x Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface OPC interface Schuko socket 10A Selector unit Tool heating 12x

Condition: excellent (used), Year of construction: 2006, For sale are functional and very well-maintained dual-fuel burners from the Weishaupt brand, model GL3-630 kW, complete with a gas line DUNGS DN 40. Weishaupt: GL3 - (630 kW) Csdpfx Ahszaby Romohc Burner type: GL3/1-E Design: Dual-fuel Output: 90 - 630 kW 16 - 53 kg/h Year of manufacture: 2006