Used Diesel Pasteurizer for sale (8,108)

Year of construction: 2024, condition: new, The pasteurizer is suitable for heat treating liquid, low-viscosity food products. The device is designed in accordance with food hygiene requirements. The heat treatment is carried out via a heat exchanger equipped with a stainless steel tube coil. The thermal energy is provided by a heating oil boiler. The temperature of the heating water is regulated by the boiler control. The temperature control of the treated liquid is achieved by a controlled switching valve. Temperature is monitored at two points: once in the heating medium and once at the product outlet. The device regulates the temperature of the heating medium automatically. Operation is fully automated. If the temperature of the juice to be pasteurized falls below the desired temperature, the output of the device is blocked and the juice circulates in the bypass system until the temperature reaches the set level. After that, the device allows filling again. After work is finished, the tube coil can be cleaned very easily using a sponge ball system. The device requires only minimal maintenance. ⚙️ Technical Information Capacity: 400 L/hour (when heating from 20°C to 80°C) Power requirement: 1 kW, 230 V, 6 A Boiler output: 35 kW Fuel: Diesel or gas Knjdpjv Srw Tofx Andja Material: AISI 304 stainless steel Dimensions: Length: 1820 mm Width: 620 mm Height: 915 mm Protection class: IP65 Connections: DN 25 Exhaust pipe: 110 mm diameter Automatic temperature control Automatic bypass system Easy cleaning with sponge balls Low maintenance Options: Manual bag-in-box filling device Semi-automatic bag-in-box filling device 3-head bottle filling module Accessories: Sponge balls for cleaning

Year of construction: 2026, condition: new, Diesel/gas pasteurizer pasteurizes various liquids before the filling process. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. One of our highest machinery achievements is our energy-saving solution integrated into our pasteurizers. It saves the heating energy up to 15-20 % and results in incredibly low heating costs. Calculations show that it costs up to 2 Euro Cents to pasteurize 1 liter of liquid. Capacity per hour – 900-1250 L of 80 ºC (176 °F) heated juice. The pasteurizer is suitable to heat various liquids, including viscous liquids: juice, puree, wine, broth, milk and other. The maximum heating temperature of pasteurizer is 90 ºC (194 °F). Our pasteurizers are equipped with highest quality German diesel and gas burners GIERSCH. Knjdpoflq Sgjfx Andea The heating power is 110 kW. Pasteurizers’ heating chambers are covered with special heat-insulating paint which preserves high temperature for a longer time and increases heating capacity. Diesel/gas pasteurizer has a digital thermostat which provides an automatic water temperature control. Automatic regulation of juice temperature ensures an easy way to change the filling temperature on digital display. The pasteurizer is fast and easy to clean. It can be washed by CIP cleaning together with our Bag in Box fillers. The boiler has an integrated spiral. This provides saving of space and also prevention of heat loss when pumping the water into external heat exchanger. As a result, this technology saves the heating energy up to 15-20%. Machine can use diesel or gas on client’s request. Diesel/gas pasteurizers work in perfect synergy with our Bag in Box fillers. They have a special connection between them which prevents liquid from overflowing and ensures easy work.

Year of construction: 2026, condition: new, Diesel/gas pasteurizer 500 heats up the liquid before the filling process. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. One of our highest machinery achievements is our energy-saving solution integrated into our pasteurizers. It saves the heating energy up to 15-20 % and results in incredibly low heating costs. Calculations show that it costs up to 2 Euro Cents to pasteurize 1 liter of liquid. Capacity per hour – 400-600 L of 80 ºC (176 °F) heated juice. - The pasteurizer is suitable to heat various liquids, including viscous liquids: juice, puree, wine, broth, milk and other. - The maximum heating temperature of diesel pasteurizer is 90 ºC (194 °F). - Our pasteurizers are equipped with highest quality German diesel and gas burners GIERSCH. - The heating power is 53 kW. - Pasteurizers’ heating chambers are covered with special heat-insulating paint which preserves high temperature for a longer time and increases heating capacity. - Diesel/gas pasteurizer has a digital thermostat which provides an automatic water temperature control. - Automatic regulation of juice temperature ensures an easy way to change the filling temperature on digital display. - The pasteurizer is fast and easy to clean. It can be washed by CIP cleaning together with our Bag in Box fillers. - Machine can use diesel or gas on client’s request. - The boiler has an integrated spiral. This provides saving of space and also prevention of heat loss when pumping the water into external heat exchanger. As a result, this technology saves the heating energy up to 15-20%. - Diesel/gas pasteurizer has pivoting wheels. - Diesel/gas pasteurizers work in perfect synergy with our Bag in Box fillers. They have a special connection between them which prevents liquid from overflowing and ensures easy work. Knodpfx Anjflrk Iodea

Year of construction: 2026, condition: new, Specifications: - Performance: 700 L/h (From 20°C to 80°C) - Electric demands: 1 kW, 230 V, 6 A, monophase - Heat performance: 80kW (diesel burner) - Fuel: diesel fuel - Fuel consumption: 7,5 L/h - Flue gas outlet: 110mm chimney - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x1700x1170 mm - Weight: 380 kg - IP65 certified electronics - Heat exchanger: soft water - Connections: DN 25 - Thermometers: 2 pcs - With automatic by-pass valve - Automatic heat control, very easy to clean - Automatic operation - flowthrough type - With 4pcs vibration-free feet - It requires minimal maintenance Kedpfx Anjfhb Itodona Available options: Two filler superstructure: BB top 180 semi-automatic BiB filler, 6 head bottle filler, puffer tank with level switches

Condition: excellent (used), Year of construction: 1998, PROD. ATLASCOPCO TYPE XAMS445 S/N YA3-047166-00291071 YEAR 1998 POWER (kW) 206 CAPACITY (m3/min) 26.1 PRESSURE (bar) 8.6 HOURS (SERVICE/TOTAL) VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no Kodpsztxxcefx Andjna HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: good (used), operating hours: 129 h, functionality: fully functional, fuel type: diesel, output current: 304 A, output voltage: 380 V, output frequency: 50 Hz, Emergency power system M94, Engine GEC Diesels Ltd, Doman Diesels, Stafford, England, Engine Type 6LET2 Kodsu Rb Trspfx Andsna Generator Newton Derby LTD. Derby England, Documentation and spare parts available.

Condition: excellent (used), Professional plate compactor from the renowned brand AMMANN. Model AVP 2920 is equipped with a reliable HATZ Diesel engine with 5 kW of power. This machine is intended for professional paving, roadworks, and compaction of soil, paving stones, bedding, and asphalt. The unit is fully mechanical with a robust German construction. Visual condition as per the photos – normal signs of use. Technical data: • Manufacturer: AMMANN • Model: AVP 2920 • Year of manufacture: 1999 • Engine: HATZ Diesel • Engine type: 1B30-6 • Power: 5 kW • Operating weight: 190 kg • Manual start • Made in Germany Applications: • Compaction of paving stones • Paving works • Road construction • Soil and bedding compaction • Excavations and foundations Condition: Used machine, complete. Knodpfx Aoy Sifyjndea HATZ engine – a durable and highly regarded diesel unit

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Knjdpfxsyi H Eqo Andoa Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: good (used), Year of construction: 1994, operating hours: 7,430 h, functionality: fully functional, overall weight: 38,000 kg, fuel type: hybrid, power: 1,500 kW (2,039.43 HP), output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Wärtsilä, Diesel Generating Set – 1.5 MWe / 50 Hz Wartsila Vasa 4R32 LN-E This Wartsila diesel generating set has been used exclusively for testing purposes by VTT Technical Research Centre of Finland and has accumulated only 7,430 operating hours since new. Originally, it was built as a conventional diesel engine capable of burning various heavy fuels with viscosities of up to 730 cSt at 50°C. The engine was subsequently upgraded by Wartsila to comply with the LN-E model specification for their 32-series engines and it was equipped with adequate fuel feeding systems, cylinder heads, pistons and liners for dual fuel (DF) and gas diesel (GD) operation. The upgrade included the installation of anti-polishing rings, an increase in engine output, and the implementation of a completely new control system. The unit has been used to test various fuels and components on behalf of Wartsila. It has been exclusively serviced by Wartsila and remains in good technical condition. Over the years, Wartsila has installed new components and control systems. At present, the engine is equipped to operate in three different modes: As a conventional diesel engine using heavy fuel oil (HFO); As a Wartsila 32DF (Dual Fuel) engine using natural gas and light diesel oil; As a Wartsila GD (Gas Diesel) engine, where gas is compressed to high pressure and injected into the cylinder, ignited by a pilot dose of light diesel oil. Naturally, to switch between modes, certain components—such as the turbocharger, cylinder liners, pistons, and cylinder heads—must be changed. All necessary components and much more additional spare parts (some brand new) are coming together in the same package. We can specify more in details upon request. Ksdpfoyfflzjx Andjna Technical support for on-site installation can also be provided, subject to a separate agreement. The machine is currently located in Kotka and can be shipped by sea to any suitable destination port. Quotations are available upon request.

Condition: good (used), Year of construction: 2004, operating hours: 500 h, functionality: fully functional, type of input current: AC, input voltage: 400 V, type of cooling: water, fuel: diesel, overall weight: 2,440 kg, continuous power (apparent): 178 kVA, continuous power: 160 kW (217.54 HP), rotational speed (max.): 1,500 rpm, Brand: SISU Model: G160S Year of manufacture: 2004 Serial number: 144871 Operating hours (read): Low hours Capacity (kVA): 178 Capacity (kW): 160 Engine brand: SISU diesel Engine model: 634DSRAG Fuel: Diesel Alternator brand: Stamford Alternator model: UC 274H Voltage: 231-400 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 257 Dimensions LxWxH (mm): 2550 x 1400 x 1870 Weight (kg) approx.: 2440 Quantity in stock: 1 Manufactured in: Finland / Netherlands Kjdjxzplispfx Andsna Comments: >x emergency generator set, without electric panel

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,470 kg, fuel type: diesel, tank capacity: 230 l, color: beige, power: 27.21 kW (37.00 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17 kW (23.11 HP), nominal power (apparent): 22 kVA, continuous power: 20 kW (27.19 HP), continuous power (apparent): 20 kVA, total length: 2,800 mm, total width: 1,063 mm, total height: 1,703 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, AVS Diesel Generator DW 20 CU 15 AK14A PRP Power: 16 kW / 20 kVA ESP Power: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: - Speed: 1,500 rpm Mechanical speed governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: canopy set; weather-protected, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. The units are sold as B-grade goods. B-grade means that the units may show cosmetic imperfections such as surface rust or rust on the enclosure. These defects do not affect the function or performance of the units in any way. Knodpfx Anjwu D Unjdja By accepting this offer, you explicitly acknowledge the described properties of the units and their stated condition.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. Kjdpfx Aewu Dbuendsna The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: MN 141360, Offer for Sale – FillMatic MSE 220R We are offering for sale a FillMatic MSE 220R mattress core stacker, a fully functional machine ready for immediate operation after connection. The equipment is intended for gluing mattress cores and ensures their automatic stacking at the end of the production line. Location: Slovakia – Oravské Veselé 02962 Basic Technical Data: • Machine No.: MN 141360 • Machine type: SRA 200 • Power: 4.8 kW • Voltage: 400 V • Year of manufacture: 2014 Kodpfx Aoxgd Hfsndsna Machine Description: The FillMatic MSE machine serves as a mattress core stacker. • It is designed to prevent damage to still-fresh adhesive seams during handling – an ideal solution for placement directly after the gluing section of the line. • Allows stacking to an adjustable height, with access from three sides depending on the safety guarding configuration. • The FillMatic MSE designation refers to a series of stacking or folding machines that can be combined or customized according to production requirements. This specific model is a combined version – a mattress core gluer with end-of-line stacking, making it suitable for efficient production and labor savings. The equipment is in good technical condition and ready for immediate deployment in your production process. For more details or if you are interested, please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: T33105.1687, Year of construction: 2006, operating hours: 22,275 h, load capacity: 12,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,015 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 12,000 kg Load center: 1,200 mm Lifting height: 5,000 mm Load capacity at load center 1,200 mm: 12,000 kg Load capacity at load center 1,500 mm: 10,500 kg Load capacity at load center 1,800 mm: 9,000 kg Front overhang C: 205 mm MACHINE DETAILS Mast type: Simplex Drive type: Diesel Knsdpfx Ajzu Nkfsndsa Overall height: 4,015 mm Weight: 21,000 kg EQUIPMENT Side shifter Fork positioner 3rd hydraulic valve 4th hydraulic valve Heater Full cab Air conditioning

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X396V01548, Year of construction: 2019, operating hours: 14,144 h, load capacity: 8,000 kg, lifting height: 5,878 mm, fuel type: diesel, mast type: duplex, fork length: 1,500 mm, TECHNICAL DETAILS Lifting height: 5,880 mm Lifting capacity: 8,000 kg Fork length: 1,500 mm Minimum fork width: 400 mm Maximum fork width: 1,750 mm MACHINE DETAILS Mast type: Duplex Number of wheels: 4 Fuel type: Diesel Engine manufacturer: Deutz Operating hours: 14,144 h Dimensions & Weight Transport dimensions (L × W × H): 3,300 × 2,232 × 4,100 mm Unladen weight: 13,050 kg Transport packages: 1 EQUIPMENT 3rd and 4th hydraulic valve on the fork carriage Documentation Knodpfozulnaox Andsa CE marking

Condition: good (used), Year of construction: 2013, operating hours: 6,405 h, load capacity: 5,000 kg, lifting height: 5,080 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, empty load weight: 6,037 kg, mileage: 6,405 km, Triple diesel forklift Make: Still (Germany) Year of manufacture: 2013 In good condition! Capacity: 5,000 kg Knsdpfx Anezv D Dpedja Lifting height: 5,080 mm Mast lowered height: 2,500 mm 6,405 operating hours Equipped with FREELIFT, SIDESHIFT, and FORK SPREADER Watch the video on YouTube.

Condition: good (used), machine/vehicle number: 3580, Year of construction: 2011, load capacity: 8,000 kg, lifting height: 2,610 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,400 mm, total length: 4,050 mm, total width: 2,400 mm, operation weight: 12,080 kg, additional equipment features: Weight system, Warning triangle, Dual tread, Equipment: lighting, Kalmar DCE80-9 from Uniktruck Kjdpfxsyuipis Andena Wheel type – Drive wheel: Wheel type – Steering wheel: Wheel size – Drive wheel: 825-15 Wheel size – Steering wheel: 825-15

Condition: good (used), machine/vehicle number: 3375, Year of construction: 2007, load capacity: 15,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 280 mm, fork length: 2,200 mm, total length: 5,250 mm, total width: 2,950 mm, operation weight: 24,180 kg, additional equipment features: Centralized greasing system, Front mud guards, Warning triangle, Equipment: lighting, Kalmar DCE150-12 from Uniktruck Wheel type – Drive wheel: Wheel type – Steering wheel: Pneumatic Knodsyuic Nspfx Andoa Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: good (used), machine/vehicle number: 3260, Year of construction: 2017, load capacity: 9,000 kg, lifting height: 4,060 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,400 mm, total length: 3,940 mm, total width: 2,320 mm, operation weight: 11,710 kg, additional equipment features: Warning triangle, Dual tread, Front mud guards, Equipment: lighting, Hyster H9.0FT-6 FLK from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 8.25-15 Wheel size – Steering wheel: 8.25-15 Knodpfx Ajyuh Uqendja

Condition: good (used), machine/vehicle number: 3223, Year of construction: 2013, load capacity: 28,000 kg, lifting height: 3,480 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 6,500 mm, total width: 3,420 mm, operation weight: 42,500 kg, additional equipment features: Centralized greasing system, Dual tread, Front mud guards, Equipment: lighting, Hyster H28.00XM-16CH from Uniktruck Knodpfxoyuh S Ne Andea Wheel type – Drive wheel: Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00-25 Wheel size – Steering wheel: 16.00-25

Condition: good (used), machine/vehicle number: 2708, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,700 mm, total width: 2,560 mm, operation weight: 22,400 kg, additional equipment features: Centralized greasing system, Engine heater, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Kodpfsyuhr Njx Andena Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 6,296 h, load capacity: 8,000 kg, lifting height: 4,705 mm, free lift: 1,255 mm, fuel type: diesel, mast type: triplex, construction height: 2,710 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic 3rd valve, work light (rear), work light (front), heater, soot filter, full cabin, interior mirror, plastic seat cushion, double pedal Kedpfxszhyqvs Andona

Condition: used, functionality: fully functional, machine/vehicle number: ML1812R-2019, Year of construction: 2019, operating hours: 3,000 h, load capacity: 18,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,265 mm, power: 153 kW (208.02 HP), fork length: 2,400 mm, empty load weight: 21,000 kg, total length: 5,470 mm, drive type: Diesel, construction width: 2,160 mm, Heavy-duty forklift - Diesel Chassis number: ML1812R-2019 Load center: 1200 Fork width: 200 mm Fork thickness: 100 mm Mast type: Telescopic Transmission: ZF WG171 Speed class: 30 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 60 - 80% Rear tire type: Pneumatic Kedpfxszv Aiko Andona Rear tire size: 12.00-20 Rear tire condition: 60 - 80% Description: Including new service and repairs. Side shifter, fork positioner, Front work lights, heater, soot filter, full cabin, air conditioning, Front and rear cameras, central lubrication system.

Condition: good (used), Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 2x injection pumps available -Price: per piece Knodpfoh It Trsx Andea -Dimensions: 460/215/H325 mm -Weight: 32 kg

Condition: good (used), machine/vehicle number: 2707, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,700 mm, total width: 2,560 mm, operation weight: 22,400 kg, additional equipment features: Engine heater, Centralized greasing system, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20 Knsdsyuhr Aepfx Andea