Used Dilo Ud-Ii/25 for sale (17,236)

Year of construction: 1978, condition: ready for operation (used), Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible. Pgsdpfoxtpq Nsx Aqusr

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Pgedpfxszhntro Aqujr

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Pgedpfx Aemi Rpioqujr 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Year of construction: 2007, condition: ready for operation (used), Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible. Psdszp Rhhopfx Aqujgr

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC - controlled by: PC Pgedpfjuv Eg Hsx Aqujr - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm - machine is operated by two workers

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Pgedpfsx D R Rfsx Aquer Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Podjzil S Ijpfx Aqusgr Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode Pgsdpfxjvaatfj Aquer - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit. Pjdpszaz Uzefx Aquogr

Condition: ready for operation (used), Year of construction: 2007, Make: MAZAK Type of machine: QuickTurn Nexus 250-II Year of manufacture: 2007 Control system: Mazatrol Matrix Nexus Machine's weight: 5.200 kg Tool holder: BMT Speed range: 4.000 1/min Cutting diameter: 380 mm Turning length: 500 mm Tool turret - slots: 12 Pl. Spindle opening: 76 mm Pjdjy I Uviopfx Aquegr

Condition: like new (used), Year of construction: 2020, functionality: fully functional, GMP Roller Laminator EXCELAM-II 355 Q Working width 355 mm, hot lamination Laminator for hot lamination films from 32 - 175 microns Infrared-heated silicone rollers, ensuring scratch-free lamination Equipped with an 8-bit microprocessor LCD display and electronic reverse function, standby function Pgsdpfezwwqlsx Aquer Temperature adjustable from 0-160 °C in 1°C increments Temperature and speed settings are pre-programmed for each film thickness The roller pressure can be precisely adjusted for each film thickness using a scale disc Max. passage height: 5 mm Adapter for 25 mm core diameter Working speed: 0-1.6 m/min, adjustable in 9 steps Connection: 220 V / 50 Hz / 1300 Watts Dimensions: W546 x D456 x H285 mm Weight: 25 kg

Condition: good (used), Year of construction: 1989, sheet width 2520 mm Psdpoy Raiyofx Aquogr plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm adjustment UW 80.0 mm back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW weight of the machine ca. 2500 kg. dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions

Condition: good (used), Year of construction: 1986, turning diameter: 1,260 mm, * Distance between centers: 11000 mm Pjdpouh Slkefx Aqusgr * Roll diameter: max. 1260 mm * Max workpiece weight: 22.4 T

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Podpfxeu Nfine Aqujgr Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Pgedpfx Aozun T Esquor

Condition: excellent (used), Year of construction: 2012, Colchester Student 2500 Gap Bed Centre Lathe (2012) Ex Research Machine Super Condition Swing over Bed 330mm Pgjdpfxoy U Rtws Aquer Swing in Gap 480m Swing Over Cross Slide 210mm Distacne Between Centres 635mm Spindle Bore 40mm Spindle Nose D1-4 Spindle Speeds 40 – 2500rpm Spindle Power 2.2kW Supplied with: 3 Jaw Chuck with Forwards and Reverse Jaws Tool Holders as Picures QCTP Coolant Tool Box 5C Collet Chuck Chuck Keys 3 Phase 415V Electics For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79230 Machine Serial Number: 308029 Cost: £7,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 250-II M 500U Max. machining diameter: 380 mm Max. machining length: 504 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck, B-210, diameter 254 mm - Tool Eye - C-axis - NC tailstock - reinforced coolant pump - chip conveyor, discharge to the side - 8 pcs. fixed tool holders Pedpfx Aqeznnl Ijusgr - 2 pcs. driven tool holders

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: Psdpfxjxp Iyho Aquogr (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Pgodpsvy It Tofx Aquer Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Condition: new, Year of construction: 2025, Arjes IMPAKTOR 250 e-EVO II (Electric) Stationary, fully electric, Twin Shaft Shredder Year: 2025 Hours: NEW 1x Set of shafts (choice available, various types depending on application*) 1x Set of breaking bars or breaker basket for concrete, wood, or cable 1x quick-change cassette, for fast shaft change 1x remote control Discharge belt and overband magnet available on request Pgsdpfxst Urq Uj Aquor Includes frequency converter. Guarantees an extremely energy-efficient shredding process. Electric Motor – 160kW Gearbox: Bonfiglioli Shredding unit: Length (mm) 3,300 Width (mm) 2,300 Height (mm) 3,200 Control unit Length (mm) 2,600 Width (mm) 1,600 Height (mm) 2,700 Weight (kg) approx. 15,000 kg Shredding Unit Hopper volume (m³) 2.25 Shaft length (mm) 1,500 Rotation speed (rpm) 11–35 Throughput performance: average values without guarantee! The actual values depend on the equipment of the shredder, the shaft configuration, the position of the counter rakes and the optimal material feed. Construction waste ⌀ 80–100 t/h Concrete / Asphalt ⌀ 60–80 t/h Waste wood ⌀ 10 t/h Biomass ⌀ 20 t/h Waste & Plastics ⌀ 10–15 t/h * You can choose between these shafts: - Star shafts 9x4 or 9x6 (Household waste, waste wood, plastic, tires, e-scrap) - Concrete shafts (Concrete, stone, construction waste, asphalt, e-scrap) - Paddle shafts (Wood, waste wood, green waste) - Metal shafts (Home appliances, e-scrap, aluminum (up to 3mm))

Condition: like new (used), functionality: fully functional, machine/vehicle number: EX-006-S25, Year of construction: 2022, operating hours: 20 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, compressed air connection: 10 bar, input frequency: 60 Hz, power: 9 kW (12.24 HP), We offer this as new CEAD S25 LSAM Extruder, year of construction 2022. Model: S25 Extruder Serial number: EX-006-S25 Input phases: 3 phases Input voltage: 400 V Input frequency: 50-60 Hz Input current: 32 A Power: 9 kW Short-circuit current rating: 10 kA Air pressure: 6-10 bar Air pressure: 87-145 psi Recommended RCD: 30 mW Pgjdey Nk S Njpfx Aquer Pellet drier and feeder are included. Almost 2 tons of Airtech Dahltram® C-250CF pellets are included + purging compound. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Pedsubbryopfx Aquogr Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Year of construction: 2015, condition: ready for operation (used), travel distance X-axis: 215 mm, travel distance Z-axis: 762 mm, overall weight: 3,300 kg, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details. • Swing over table: 220 mm • Distance between centres: 500 mm • Maximum machining diameter: 200 mm • Maximum workpiece weight between centres: 50 kg • Maximum workpiece weight in chuck: 20 kg • Grinding wheel dimensions: Ø305 × 25 × Ø127 mm Pjdpfx Aozuy T Doqusgr • Grinding wheel speed: 1,880–2,210 rpm • Maximum peripheral speed: 30 m/s • X-axis rapid feed: 4,000 mm/min • Grinding head swivel angle: ±30° • Z-axis rapid feed: 8,000 mm/min • Minimum input increment: 0.0001 mm • Workhead spindle: Combined dead and live spindle • Workhead centre taper: MT No. 3 • Workhead through-hole diameter: Ø18 mm • Workhead speed: 10–500 rpm • Workhead swivel angle: +30° to -90° • Tailstock spindle travel: 20 mm • Tailstock centre taper: MT No. 3 • Coolant tank capacity: 120 litres • Lubricant tank capacity: 3 litres • Machine dimensions: 2,851 × 1,735 × 1,710 mm • Power supply: 200 V, 50 Hz, 3-phase, 3-wire • Total connected load: 15 kVA / 10.5 kW • Maximum full-load current: 50 A • Largest motor: 5.5 kW / 22 A • Control circuit: AC 100 V / DC 24 V • Condition: Operational

Condition: new, Year of construction: 2025, Arjes / Eggersmann Impaktor 250 EVO 2 - incl. 1 set of shafts NEW - Arjes Impaktor 250 EVO 2 with one set of shafts Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight: 14,500 kg Standard engine configuration: Volvo-Penta, Stage V / 129 kW Hook lift Podpswnpwzsfx Aqusgr Track chassis Overband magnet with discharge container Water spraying for less dust spreading Remote control 1 set of shafts of choice, Shafts installed and incl. quick-change cassette and breaker bars Star shafts (tires, trash, plastic) Concrete shafts (demolition waste, asphalt) Paddle shafts (green waste, wood) Optional on request: - Crushing baskets for concrete and wood - Winding fans - Finger screen, disc screen - and more…

Year of construction: 2005, condition: good (used), Pallet with 18H7 T-slots compatible with the DMG DMC 100 H and DMG DMC 100 U, as well as the DMC 125H/U Duoblock >10 pallets available Pgedpfxezkbt Ds Aqusr