Used Dimeco 2371E-Fps + 1676 C-Vv for sale (55,508)

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive Hsdpfetgvgpjx Amgon • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t Hjdpfxevuuduo Amgsn coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 2001, material width 410 mm coil weight 2,0 t coil internal diameter 380 - 520 mm coil external diameter 1400 mm power requirement 2,2 + 1,1 kW Hjdpfevut Thsx Amgjn weight of decoiler 0,7 t dimensions decoiler (WxDxH) 1,4 x 1,4 x 1,65 mm weight of the pulling device 1,15 t required space of the pulling device (WxDxH) 1,7 x 1,1 x 2,2 m Decoiler 2370 DFPS without drive, with pneumatic lag brake, hydraulic centralized expansion, pneumatic snubber roll pulling device / hydraulic threading device 235 D with infinitely variable drive, coild loop control via ultrasonic material thickness up to approx. 6,0 mm roll diameter approx. 160 mm

Condition: excellent (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, coil weight: 2,000 kg, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, spreading range: 900 mm, Dimeco Coil Pick & Tilt Coil Handler Machine Type: Coil Pick & Tilt Handler Model: Coil Pick & Tilt 20 1500 250 Hsdpfeu Nx Nzsx Amgon Year: 2023 Hours: 10hrs Condition: Excellent Description Electric Powered Truck Specifically Designed For Coil Handling – No manual operation. – Coil tilting is fully controlled safety is improved. – Truck is able to pick up coil from a standard wooden pallet. Technical Specifications Max Coil Weight: 2000kg External Ø (Max): 1500mm External Ø (Min): 600mm Width: 250mm Internal Ø: 508mm Max Height of Forks: 1300mm Forks Thickness: 40mm Distance Between Forks(Open): 1610mm Distance Between Forks(Closed): 610mm Truck Weight: 1365kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2021, operating hours: 5,999 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,970 kg, space requirement width: 2,435 mm, space requirement length: 1,875 mm, space requirement height: 1,800 mm, workpiece weight (max.): 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine offering high precision, long service life, and maximum operating comfort. Multiple ribbed cast construction ensures full performance across the entire working area. Control System SIEMENS 840D SL path control Working Range X / Y / Z: 620 / 350 / 400 mm Drive System 2-stage main gearbox with high torque and automatic gear shifting Drive power 100% / 25% DC: 5.5 / 7.0 kW Torque 100% / 25% DC: 210 / 340 Nm Speed range: 0 - 4500 rpm, infinitely variable gearbox Digital Feed Infinitely variable feed rate on all axes Feed range: 0 - 2000 mm/min, infinitely adjustable Rapid traverse: 5 m/min Handwheel rotation: 2.5 mm per X / Y / Z axis Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill with manual clamping, stroke 80 mm Tool holder: SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – standard Additionally, the milling head can be shifted 150 mm on the Y-axis. For horizontal machining, the milling head does NOT need to be removed—simply slide it back into the rear rest position. Rigid Angle Table Clamping surface: 820 x 420 mm T-slots: 1 piece/14 H7 alignment slot, 5 pieces/14 H12, spacing 63 mm Table load: 350 kg Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable, for all axes Main spindle motor with spindle speed braking function Oriented spindle stop, vertical & horizontal, with threading cycle without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated ring on all axes Ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Compact electrical cabinet integrated with machine Splash guard enclosure with optimal operator access Toughened glass window on rear of enclosure Top open, front and right door plus sliding door on front, secured with interlock switch Locked when unpowered; additional maintenance opening on left side—bolted, removable Freestanding mobile coolant tank, 80 liters (dimensions: 1250x460x200 mm) Automatic central lubrication Steel telescopic cover to protect Z-axis guideways Halogen machine lamp V24 Easy-to-use milling guard with plexiglass pane Operator manual, spare parts plan, and electrical diagram in paper form Set of machine feet Transport rod and stop rings for 2-strand lifting gear Color: Light grey RAL 7035 and tele grey RAL 7045 fine texture Footprint – Electrical Specifications Machine weight approx. 1970 kg Space requirement (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. pre-fuse: 35 A NH Network type: TN-S Connection type: fixed connection For further information, please refer to the PDF attachment. The machine is supplied without tools or accessories. Hodpfx Aey R Ebzomgon

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Hedsyitxqopfx Amgsn Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertical glass edging machine + water cleaning system Clean 20 glass thikness : 3 - 30 mm min. glass size : 50 x 50 mm max. glass weight : 1000 kg working height : 812 mm Hodpsyhpqaofx Amgon total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. weight : 2890 kg The machine has worked with a flocculant . 67000 working meters total machine lenght : 720 cm

Condition: used, Year of construction: 1997, material width 300 mm coil weight 2 x 1,25 t material thickness 0,4 - 1,2 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm no. of straightening rolls 9 straightening roll diameter 30 mm number of draw-in rolls 2 roll diameter 30 mm speed 3 - 30 m/min feed length 0 - 9999,9 mm power requirement 3,0 + 2,5 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm weight of straightening machine 0,45 t Hjdpfxeyx Ikno Amgjn dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm weight of the feeder 0,4 t dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec Hedpfx Aevut Edjmgjn feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation

Condition: used, Year of construction: 2017, operating hours: 534 h, Equipment: all wheel drive, INTERNAL VEHICLE NUMBER: M565----Hamm HD8 VV * OPERATING HOURS: 543 HOURS * YEAR OF MANUFACTURE: 2017 * WEIGHT: 1,450 KG * ENGINE POWER: DIESEL 14.8 KW / 20 HP * ENGINE: Kubota Hjdpfsy N Ilaex Amgon * WORKING WIDTH: 80 CM FRONT AND REAR * ROLLERS: SMOOTH / SOLID * ARTICULATED JOINT * OPERATING WEIGHT: 1,840 KG * GROSS WEIGHT: 1,640 KG * AXLE LOAD FRONT/REAR: 770/870 KG ----+++ Exclusive Special Offer at Autohaus Mat GmbH: Up to €1,000 Trade-in Bonus – Your Advantage for Vehicle Replacement! +++ Contact us directly via WhatsApp at: Why choose Autohaus Mat GmbH? 1. Attractive Trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize your vehicle's value and benefit when purchasing a new model. 2. Custom Financing Solutions: Want to finance your new vehicle? We offer tailored financing options to suit your needs: * With or without down payment * Flexible terms * Best conditions 3. Personalized Customer Service: Our experienced team assists you from the initial consultation to vehicle handover. 4. Our Additional Services: In addition to vehicle purchase, we offer exclusive services for a smooth process: * Worldwide Vehicle Sales: Support for purchase and export, wherever you are. * Export License Plates: Provision of export or short-term license plates for transport. * Customs Clearance: We take care of all export formalities. * Vehicle Delivery: Secure and timely delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the details in the purchase contract or order confirmation are legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with a VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: * Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp at: Work lights ROPS / Safety bar Water sprinkling Roller width 800 mm Double vibration

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Hjdpfxsywuihe Amgjn Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 10 cup wheels vertical edging machine + Clean 20 floculant water treatment system variable angle 0-45° glass thikness : 3 - 55 mm min. glass dimension : 100 x 100 mm max. load : 1800 kg height of work surface : 840 mm total power : 20 Kw tank capacity 340 L forward speed : 0,4 - 5,5 m/min. Hodpfx Aeymxk Hsmgsn total weight : 3800 kg

Year of construction: 2007, condition: ready for operation (used), A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galandrino Monoblocco Fenix 3, year of manufacture: 2002, 6) Syscona Unicount closure checker with counter for cork and metal closures, 7) Garnep Lebetta 4/3/18 1320 labeller, year of manufacture: 2017, including 2x wet gluing units, 3x SK units, camera system for rough alignment of bottles and domino laser for imprints, 8) Adelski PP2004 Longcap automatic capping machine, year of manufacture: 2007, 9) Adelski MCA PV 6541/1/210 AVM2104 automatic capping machine, year of manufacture: 1999, 10) Corker Bertolaso Delta, year of manufacture: 1977, 11) Carton sealing machine Normpack NCF-047, year of manufacture: 2001, including hot melt gluing unit, 12) Packaging machine Kettner Robot Junior Packer BE 2-T, year of manufacture: 1992, 13) Pallet loading machine Kettner Pressant Universal 1200, year of manufacture: 1992, 14) Crate labeling machine Weber Legi-Air 40XX, year of manufacture: 2004, 15) Dryer Okema T3, year of manufacture: 1999, 16) Carton printing machine Blum CompactLine 3. 0, number of heads: 8, printing options: double-sided, 17) Silmo 40g ozone generator, year of manufacture: 1983, 18) Schaberger glass lifting machine, year of manufacture: 1977, including new glass head, 12-bottle crate head and bottle table. Documentation available. On-site inspection is possible. Hodpfx Ajvur Htemgsn

Condition: used, mileage: 131,442 km, power: 129 kW (175.39 HP), first registration: 06/2019, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, ? extendable structure, telescopic Meier Ratio AK4 V ? rear window ? differential lock ? disc brakes ? leaf springs ? passenger seat 2 seater ? electric windows and mirrors ? airbag driver's seat ? cruise control Hsdpfotwt Easx Amgen ? 3400 mm wheelbase ? automatic climate control ? radio ? tires 205/75R17.5 ? 3610 kg payload ? and much more !!! Errors, changes and prior sale reserved !!!

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Hodpjzac Sbefx Amgen

Condition: ready for operation (used), ThyssenKrupp Liftequip VVVF converter CPI 32 / 6619 00 3121_L SN: 1095720, used, good condition, 100% functional, scope of delivery as per photos Hedpfx Amjxah Ugjgjn

Condition: used, mileage: 184,272 km, power: 96 kW (130.52 HP), fuel type: diesel, maximum load weight: 1,450 kg, first registration: 12/2015, emission class: euro5, number of seats: 3, Equipment: ABS, power assisted steering, For information Hodpfjy A Tt Nox Amgjn

Condition: new, For sale: Robust, precision industrial coupling from the renowned Japanese brand C-max / Fuji Seiko Co., Ltd. Model: 51288015900 Hsdpfx Amsw Rdvijgon Production date: 17.01.2006 The coupling is intended for use in CNC machinery, drive systems, industrial automation, spindles, and rotary axes. Equipped with a four-point mounting flange and sleeve mounting with locating balls. ⸻ Technical data: • Outer diameter: 81.03 mm • Flange diameter (bolt hole spacing): 63.04 mm • Total length: 52.96 mm • Inner sleeve diameter: 31.46 mm • Locating element with groove: 50.75 mm ⸻ Manufactured from high-grade steel, stored as warehouse stock – condition very good, minimal storage marks. Original manufacturer's packaging with Japanese label. /////Price per piece/////

Condition: new, For sale: professional pump from the Italian manufacturer LOWARA (Xylem). Model BGM11/C E2 – the pump is new, unused, and has only been in warehouse storage. The set includes the original packaging and instruction manual. The pump is ideal for water systems in domestic and industrial applications. Technical specifications: Manufacturer: LOWARA Model: BGM11/C E2 Power P1: 1.34 kW Hjdeyvambjpfx Amgjn Power supply: 230 V (single phase) Frequency: 50 Hz Capacity: 20–70 l/min Max head: 30–45.5 m Max pressure: approx. 8 bar Protection class: IPX5 Liquid temperature: up to 40°C Material: stainless steel (inox) Weight: approx. 14 kg

Condition: ready for operation (used), Lang CNC L-Step 22/2 MFP stepper motor controller, SN: V / 200 - 240 V / 50 - 60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Hjdpfsy Sdvaex Amgen

Condition: used, Year of construction: 2014, operating hours: 1,065 h, Empty weight: 3.385 kg Please contact Emal Jaweed for more information Hedpfx Amex R T U Aegon

Condition: used, mileage: 1,430 km, power: 19 kW (25.83 HP), first registration: 05/2004, fuel type: diesel, empty load weight: 5,660 kg, maximum load weight: 340 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 1,850 mm, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 2, Year of construction: 2004, Equipment: all wheel drive, * German device * Condition see photos Hjdpfx Ajvhpywjmgsn * New UVV test possible on request (for an extra charge) * Battery voltage (external) 230 Volt * 18.90 m lateral reach * 30.40 m working height * 6-fold telescopic lift arm * Driven by powerful Hatz diesel engine * Work basket for 2 persons max. 200kg * Slope angle max. approx. 13° * Passage width / construction width only 1.35 m * Driving and steering movements from the workman basket or via cable remote control * Crawler chassis with rubber tracks * 450° slewing range * Ideal for working on rough terrain and sensitive ground * 4 hydraulic outriggers * Documentation available * 15,000 has currently been invested * Height: 2.29 m * Length: 7.34 m * Ruthmann TR300E * Type: 2L40CH If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 2012, condition: as good as new (ex-display), functionality: fully functional, We now offer a Linea Pack Avvolgipack 40 CA, a high-quality machine for horizontal wrapping of products. This particular unit is from 2012 but has only been used as a demonstration model. As such, it is in absolutely mint condition and has never been operational in production. Elongated products: It is ideal for items such as pipes, mouldings, metal profiles, boards, or rolls. Bundling: When several smaller units need to be combined into a package, for example multiple pipes, carpets, or timber. Protection against external influences: Just like conventional pallet wrapping, it provides effective protection against moisture, dirt, and transport damage. Hjdpfx Ajy N Uqvsmgon The machine is available for immediate delivery. Shipping costs are additional. Model: Avvolgipack 40 CA Year of manufacture: 2012 Machine height: 1,390 mm Machine width: 924 mm Machine depth: 2,674 mm Capacity: 3-25 m/min (throughput) Power supply: 220V, 0.37 kW Max product height: 190-250 mm (depending on product width) Machine weight: approx. 400 kg

Condition: new, mileage: 250 km, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, color: white, driver cabin: sleeper cab, gearing type: other, emission class: none, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, low noise, onboard computer, parking heater, Financing / leasing possible after successful credit check! Contact us! Subject to errors and prior sale. Wheelbase: 3800 mm Driving Comfort Plus package Hsdpfsy Rdlfex Amgen Full LED package Living Comfort Plus package Premium Style Plus package CAMBIO 12TX 2250 TD 24V trailer socket, 2x7-pin Gun Metal Lines IVECO logo in gunmetal grey Upper bed with continuous mattress Dashboard: silver trim ECO-NORMAL-PERFORMANCE mode Aluminum air tanks 2 wheel chocks 210AH performance battery Plastic parts in cab color ADR equipment Retarder / Intarder ZF Leather steering wheel Cab air suspension Luxury driver's seat with climate control Battery charged Operator's manual in French 4x2 MY24 CAN-OPEN interface CAN-BUS Left and right luggage compartments Blind-spot monitoring system right+left Without jack Without first aid kit Fifth wheel coupling h 150mm+50mm Sun blind for side windows AdBlue tank 135/145L Exterior sun visor Luxurious, swiveling passenger seat Curtains at the bed Lower bed one-piece, soft Tank 930L (640L + 290L) Foldable passenger table Night-time safety lock Additional diesel/water heater 4 KW Premium refrigerator Ambient lighting Front LED headlights Automatic and stationary air conditioning Fog lights / cornering lights Roof and side spoilers Operating and maintenance manual, electronic Microwave pre-installation Reversing alarm, deactivatable Battery master switch, ADR Electronic immobilizer with third key Rear axle ratio i = 2.31 Fifth wheel from Jost Horn behind bumper LED rear lights Large step behind cab Trailer lift axle switch Black film on doors Pre-installation for auxiliary headlights Painted side cladding No toll system pre-installation Digital EC control unit 4.1 ADR Ride height with two settings Infotainment 10" integrated display Distance control cruise control ACC with Stop & Go Electric parking brake

Condition: used, Year of construction: 1990, Pressure 250 t stroke 16 - 160 mm no. of strokes 33 / 50 /min Throat 410 mm Hjdpfx Amsy Ruqrogjn distance table/ram, max. stroke up, adjustment up 540 mm table surface area 1100 x 790 mm Hole in the table 660 x 320 mm table height over floor 720 mm Passage to the back 590 mm ram surface 800 x 500 mm ram adjustment 120 mm power requirement 16,0 / 23,0 kW weight 28,5 t dimensions (WxDxH) 2,1 x 3,2 x 3,4 m polumschaltbar with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, motoric centralized lubrication