Used Dinkel Dapp 18000 for sale (432)

Condition: excellent (used), axle configuration: 2 axles, first registration: 10/2018, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, color: grey, Year of construction: 2018, Front axle: Steered Unladen weight: 3,780 kg Payload: 14,220 kg GVW: 18,000 kg Technical condition: very good Optical condition: very good Nwedpfxezx Rm No Ai Ten Damage: none Warranty: 12 months Please contact Lorenz Schoutteet for further information.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, loading space length: 7,700 mm, loading space width: 2,250 mm, loading space height: 2,480 mm, Equipment: ABS, tail-lift, Dinkel DTAKWLW 18000 Beverage Transport, Tilting Walls, SAF Axles, LBW For inquiries: 0726686 * Condition: Very good * First registration: 04/2019 * Permissible total weight: 18,000 kg * ABS * Air suspension * Side tilting walls * SAF axles Tail lift * Manufacturer: Bär * Load capacity: 2,000 kg Dimensions (loading area): Internal length: 7,700 mm Internal width: 2,250 mm Internal height: 2,480 mm Tires: 1st axle: 385 / 55 R 22.5, 25% air suspension 2nd axle: 385 / 55 R 22.5, 25% air suspension Nwodpfjzrirkex Ai Tsn ----Price: 6,900 Euros + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish, and Russian. Typographical errors, errors, and prior sale are subject to change.

Condition: used, maximum load weight: 14,420 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2017, next inspection (TÜV): 10/2028, Year of construction: 2017, Internal vehicle number: G117 Available immediately on our premises in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) 2 axles Permissible total weight 18,000 kg Unladen weight 3,490 kg Subject to errors. Nwsdpfou D U U Aox Ai Tjn We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, empty load weight: 3,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2015, loading space length: 7,100 mm, loading space width: 2,490 mm, loading space height: 950 mm, loading space volume: 17 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 5,800 mm, color: orange, Equipment: ABS, Disc brake Njdpjuv Hrqefx Ai Town EBS Payload 14,700 kg DC axles Extendable drawbar Errors excepted

Condition: used, maximum load weight: 14,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/1999, next inspection (TÜV): 02/2018, loading space length: 7,000 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, loading space volume: 17 m³, Equipment: ABS, * ABS Njdpfed T Nytsx Ai Tjwn * Lift axle * SAF axles * Front supports * Rear supports * 5-chamber taillights ----Body: Dump body, raised front wall, wooden floor, lashing eyes, folding center and rear supports. For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations.

Condition: used, first registration: 10/2006, Year of construction: 2006, DINKEL 5-axle special semi-trailer / 5m width and 3.5m height under tarpaulin !! For special transports, e.g. machine transports !! • Semi-trailer can be electrically widened to 5 meters • Internal height: 3,200 mm (3,500 mm possible!) • EDSCHA tarpaulin cover • electric/hydraulic liftable roof • anodized/galvanized frame! • 5 x twin-tired SAF axles • electrically steerable • air-suspended • 1st axle can be lifted • 4th + 5th axle steerable • Tires: 205/65 R 17.5 • Disc brakes Nwsdjzmf Udopfx Ai Tsn • Permissible GVW: 49,000 kg - TÜV/MOT and inspection report on request and subject to surcharge: new! - German vehicle! - 1st owner! Errors and prior sale excepted! = Further information = Unladen weight: 10,600 kg Price: On request

Condition: used, axle configuration: 2 axles, total width: 25,500 mm, total height: 28,000 mm, Year of construction: 2009, Equipment: ABS, = Additional Options and Accessories = - EBS – Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at the telephone number below). Dinkel DSAFA 36000 Tilt Trailer Additional headlights on the vehicle’s rear, SAF axles, Wabco ABS, spring brake accumulators, drum brakes, both axles steered, loading area dimensions L 9.68 m W 2.54 m / over the fifth wheel plate L 3.14 m W 2.54 m, tire tread depth: 1st axle 10-12 mm, 2nd axle 11 mm, permissible total weight: 36,000 kg, tare weight: 11,750 kg, payload: 24,250 kg. Upon request, we will provide you with a leasing or financing offer. Njdpfx Aoyfr Hfsi Tewn Mr. Seidel (tel. number below) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further Information = Tare weight: 11,750 kg Payload: 24,250 kg GVW: 36,000 kg Please contact Tobias Ebert for further information.

Condition: used, maximum load weight: 31,710 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2016, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Nwedpjy Dy Ehefx Ai Tjn Chassis with wedge-shaped design. Increased point load of approximately 25,000 kg over approximately 5,000 mm. 24,000 kg telescopic support winches with load and fast-speed settings. Lashing points in 5,000 kg, 6,000 kg, and 10,000 kg versions. 8 stake pockets (for 2 front walls). Aluminum roof rail with sliding cover. Rear stakes extendable to approximately 3,500 mm, for loading and unloading purposes only. Three sliding stakes per side. End stakes extendable laterally in the direction of travel. Front wall designed as a storage area with integrated shelving system, closed on the inside. DINKEL lift roof, mechanically adjustable in height, lift roof height 400 mm, operable on both sides or on one side. Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) with height adjustment in the stakes. Trailer can be driven under tarpaulin up to a total height of approximately 4,400 mm (open at the rear above the loading platform). Upper portal crossbeam with sliding cover, movable. Four rows of stackable 150 mm aluminum slats on the side (only 2 rows of slats in the upper bunk), 450 mm pockets at the bottom, 4 rows of pockets above, even spacing between them. WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV. Air suspension in ECAS version, with lifting and lowering function. Wabco Smart Board with engine load display and lift odometer. 3 x 10,000 kg SAF axles with drum brakes. 3rd axle as a friction-jointed trailing axle. 1st axle can be lifted. Tires 235/75 R 17.5. Dhollandia heavy-duty lift platform type DHLSU, load capacity 9,000 kg, load distance 1,000 mm, steel platform approximately 3,000 x 2,500 mm. Hydraulic additional support, automatic ground leveling. Loading platform with ramp function for inclining the platform, for use as a drive-up ramp, loadable up to a maximum of 13,500 kg. Chassis painted in mb-novagrau. Body painted white. Tarpaulins with customer lettering!

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm Njdpfx Aslthguji Tjwn * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: used, mileage: 18,000 km, first registration: 12/1993, fuel type: gasoline, axle configuration: 4x2, color: red, gearing type: mechanical, total length: 5,230 mm, total width: 1,970 mm, total height: 2,260 mm, Year of construction: 1993 Empty weight: 2.260 kg Nwodjy Uwxyspfx Ai Ton MERCEDES 310 1993 EX DUITSE BRANDWEER , DUITS KENTEKEN. PERFECTE TOESTAND WERKELIJK ALS NIEUW.

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Nodpfx Aez Dmn Rji Town Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of information to provide, so I have posted several pictures with basic details to give you an overview of the saw's capabilities. It is a rare model with a feeder (single piece) of 0-2000mm, as well as repeat cutting of 2000-9999mm. Automatic zeroing before cutting. CNC saw head with automatic rotation of +/-60 degrees, 2 types of lubrication, emulsion, and direct spray. Option to direct the cut piece to an ejector for small pieces, as well as a chain ejector with a function for lowering longer and heavier pieces. I haven't included this in the pictures as it is not installed, but the saw also comes with a set of protective guards with safety barriers and a large number of spare parts. The complete documentation is original and is linked to the machine's serial number, making installation easy and straightforward. Nwsdpfx Aioyk Inpe Ten Problem explanation: the saw is connected to the electrical power supply, and each individual function (and there are many) is fully operational. The problem arises during automatic operation; the most likely cause is the program parameters themselves (it uses the Windows platform). I haven't been able to find a suitable programmer who can learn on my machine. Possible solution: I contacted the saw manufacturer, and they directed me to their authorized service provider, so I have their contact information, which I can provide to the future buyer. The estimated cost of repair in Serbia is between 3000-5000 EUR. If you are closer to Germany or the Czech Republic, this cost will be significantly lower. So, there are two price categories: if you buy the machine in its current condition, the price is as advertised. If I resolve the problem, the price will be considerably higher. The advertised price includes professional dismantling and loading onto a truck (a rather important, and not inexpensive, item). Transportation is at the buyer's expense. I hope I have clarified the current condition of the machine. Due to a change in business activities, the saw is surplus to production. Happy shopping!

Condition: used, Year of construction: 2004, Tires: 750/60 R30.5, universal joint shaft, K80 lower linkage, forced steering K50 on the left, air brake system, hydraulic drawbar suspension, eccentric screw pump, tire pressure control system with compressor, docking arm on the right, 6-inch connection at the front right and left, cutter on the left, air suspension, steering axle, 40 km/h, 18m Vogelsang trailing hose boom, electric operation. Nedpfx Aiez Sc R Te Tswn

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from Nedoz Dmnwspfx Ai Town

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions L x W x H 4100 x 2100 x 2100 mm -External dimensions (with rails) L 9970 x W 3060 x H (with lift-up door) 6110 mm -Control system Eurotherm Nanodac Nwjdpfxou Hma No Ai Ton -Temperature stability (at rated temperature without load) ±5°C -Automatic inlet and outlet air dampers -Electric lift-up door -Electrically driven hearth carriage -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be pleased to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enamelling furnace, drying oven, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 18,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 66 W, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Machine: Horizontal CNC machining center Manufacturer: Hüller Hille Type: Bluestar 6 Year of manufacture: 2007 Nwodpoz N D Akjfx Ai Ten Control system: Fanuc 21iMB Technical data X / Y / Z-axis: 800 / 800 / 800 mm NC table: 0.001 degrees 2 pallets: 630 x 630 mm Pallet load: max. 1000 kg Workpiece size (diameter x height): max. 900 x 950 mm Spindle speed: 8000 rpm Spindle drive: 66 / 54 kW Tool holder: SK50 Tool changer: 40 stations Tool weight: max. 20 kg Tool diameter x length: 125 x 450 mm Feed rate: 50000 mm/min Rapid traverse: 50 m/min Machine dimensions (L x W x H): 4800 x 3400 x 3400 mm Machine weight: 18000 kg Accessories: Chip conveyor, coolant system, extraction system Still in operation and available for inspection.

Condition: used, Year of construction: 2004, machine/vehicle number: LC617, Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomodul labeller, Krones Linapac autopacker, Krones Variocart C-40 case erectors (x2), Krones Variocol H-120 case sealer, Garvens E40-DMS checkweighers (x2), Videojet 3330 laser coders (x2)Years of manufacture (predominant): 2004 core line, with labeling and coding upgrades in 2015 and 2016Line scope: Fully integrated from depalletizing, rinsing, filling, capping, labeling, inspection, coding, packing, case forming and sealing, to conveyingAdvanced Automation & Control SystemsThe line features comprehensive automation across all stations to ensure stable, synchronized operation at 18,000 bph. Continuous multi-head capping from Zalkin enables consistent closure application. In-line inspection and weighing provide real-time quality control and automated rejection. Laser coding and case printing integrate seamlessly for traceability and compliance within beverage production.Integrated controls for coordinated machine operation and changeoversIn-line inspection (fill level/visual) and checkweighing with automatic rejectLaser coders for high-speed, permanent coding on glass containersEnd-of-line automation including autopacking, case forming, and sealingProduction Line Integration CapabilitiesEngineered as a cohesive, second hand packaging system, the line offers end-to-end integration and stable handling of glass bottles. It is suitable for spirits bottling with format flexibility across common 0.7L, 0.75L, and 1.0L sizes. The conveyor network covers container, pack, and pallet levels, supporting streamlined material flow and efficient accumulation.Inline operation from depalletizer to labeller and end-of-lineFormat flexibility across 0.7L, 0.75L, and 1.0LFull conveyor network for containers, packs, and palletsCompatible with additional upstream/downstream equipment as requiredMachine Condition & Maintenance HistoryThis used bottling line has been maintained to a very high standard with regular OEM servicing. It is currently in production with excellent operational performance and strong reliability. Availability is planned for October–November 2026, allowing for structured decommissi... Nsdpfsyzz Hhsx Ai Tswn

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 308, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,600 mm, table length: 650 mm, table load: 1,850 kg, overall weight: 13,000 kg, - Year of manufacture: 1994 - Single owner, used exclusively in-house - Fully operational, powered, ready for demonstration Nwedpoz Rvb Uofx Ai Ten - Control: Fanuc 0MC - X-axis machining range: 1300 mm - Y-axis machining range: 650 mm - Z-axis machining range: 660 mm - Table working surface: 1600 x 650 mm - Max. permissible workpiece weight: 1850 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 rpm - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK50 / MAS BT50 - Tool magazine: 30 stations - Machine weight: 13,000 kg - Serial number: 308 Net price ex location Luckenwalde (Germany), not loaded, without transport

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 208, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,100 mm, table length: 450 mm, table load: 700 kg, overall weight: 7,000 kg, - Year of manufacture: 1994 - Single owner, used in-house - Fully operational, powered on, ready for demonstration - Control system: Fanuc 0MC - X-axis travel: 800 mm - Y-axis travel: 450 mm - Z-axis travel: 510 mm - Table working area: 1100 x 450 mm - Max. permissible workpiece weight: 700 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 rpm - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min Nodpfxsz Ru Uts Ai Tewn - Tool holder: SK40 / MAS BT40 - Tool magazine: 25 stations - Machine weight: 7000 kg - Serial no.: 208 Net price ex works, unloaded, at location Luckenwalde (Germany), excluding transport

Condition: used, Year of construction: 2013, machine/vehicle number: A1 /000149, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 13,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,600 mm, workpiece length (max.): 13,600 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, workpiece weight (max.): 2,600 kg, number of axes: 8, number of slots in tool magazine: 11, controller manufacturer: osai, actuation type: electric, total height: 3,500 mm, total length: 31,000 mm, total width: 6,500 mm, overall weight: 18,000 kg, table length: 13,600 mm, table width: 1,250 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Cutting center for glulam beams, solid wood beams, and X-lam panels with a width of 1250. Machine equipped with software for converting files into BTL language. Designation: FORA CNC Milling Machine Brand: SCM ROUTECH Model: OIKOS 12 Type: OIKOS12 HT Serial number: A1/000149 Year of manufacture: 2013 Weight: 18000 kg Rated voltage: 400 V Number of phases: 3 Rated current: 63 A Frequency: 50 Hz Njdpfxez Hcp Ao Ai Tjwn Reference: 3-577 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. Nwsdpfxoz Ayv Ue Ai Ton The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: excellent (used), Year of construction: 2011, operating hours: 7,541 h, functionality: fully functional, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 2,067 mm, total length: 5,671 mm, total width: 2,721 mm, overall weight: 8,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Main spindle: 25 kW, 5000 rpm, SMW Autoblock chuck diameter: 250 mm, bar diameter: 65 mm. Counter spindle: ISM52, 20 kW, 6000 rpm, SMW Autoblock chuck diameter: 210 mm. Nwsdpfx Aiez Dpm Ne Tjn Turning and milling spindle (B-axis): HSK63A, 18000 rpm, external/internal coolant with high-pressure flushing at 20 bar. Direct axis measurement. Tool magazine for 24 tools. Chip conveyor, extraction system with filtration. The delivery includes various HSK63A tool holders. Direct sales to end users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), Year of construction: 2016, operating hours: 16,803 h, travel distance X-axis: 800 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 850 mm, workpiece weight (max.): 1,800 kg, total height: 3,700 mm, total length: 5,000 mm, total width: 5,600 mm, table height: 700 mm, table length: 900 mm, overall weight: 21,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, Year of construction: 2016 CNC controller: CELOS with SIEMENS 840D sl operate 21,5" ERGOline Control with Multi-Touch Screen Axes X-axis travel mm: 800 Y-axis travel mm: 1050 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º (0,001) Feed rates m/min: 60 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 7 Milling/turning table nc: Table dimensions mm: Ø900x700 Max. workpiece weight kg: 1800 Table rotation speed rpm: 40 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40/100%ED) Spindle torque Nm: 130/86 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 63 Tool changer: Double gripper With free neighboring places mm: 120 With occupied neighboring places mm: 80 Max. Tool Length mm: 650 Max tool weight kg: 15 Chip-to-chip time s: 4.2 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp Nsdpfx Aio Adzbrj Tswn Tool breakage probe Mist collector 3D quickSET MPC – Machine Protection Control Paper band filter Active chatter suppression (ACC), improved surface finish with reduced machining time, extended tool life Machine running times Under power: 38383 Spindle Working: 16803 Rated power kVA: 63 Basic machine dimensions / weight Length mm: 5000 Width mm: 5600 Height mm: 3700 Weight kg: 21500

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Nwodpfxjzd Agre Ai Tsn Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: good (used), Year of construction: 2012, overall weight: 10,000 kg, Used TechnoTurn Machine equipment: Fixed portal. The following components are mounted on the portal: B-axis with 360° movement, automatically controlled by the CNC. The group carrier plate is mounted on the dovetail slide. “TURN” milling head for milling and sawing on all 6 sides of the workpiece. The milling head has the following features: Special milling unit with 2 independent outputs (A-B). A-output: Tool holder HSK 63 F for automatic tool changing, infinitely variable speed from 1000 to 18000 rpm. B-output: Flange mounting for the saw blade, max. Ø 600mm with programmable speed from 1000 to 4,000 rpm. Spindle power of 12 kW at 7000 rpm. Programmable speed from 1000 to 18000 rpm. Liquid cooling. C-axis rotation 540°. Z-axis travel 1200 mm. X-axis travel 800 mm. Inverter 22 kW for spindle control from 1000 to 18000 rpm. Technical data: 7 controlled axes: 2X-Y-V-Z-B-A Axis travel X: 800 mm Axis travel Z: 1200 mm Rotation axis B: 260° Rotation axis A: 540° Maximum standard dimensions of the supports: 7,000 x 400 (h) x 240 mm. Maximum length of the supports with optional supports: unlimited. Minimum dimensions of the supports: 50x50 mm. Travel speed axis X: 63 m/min Travel speed axis Y-V: 102 m/min Travel speed axis Z: 68 m/min Rotation speed axis B: 12 rpm Rotation speed axis A: 28 rpm Electrical system: 400/50Hz ±5% Air consumption (6 bar): 400 l/min. Tool changer with 11 positions. Additional supports in the infeed and outfeed area. Processing of workpieces of virtually unlimited length. Nwodpfxs Adrcge Ai Ten We will gladly answer any further questions upon request.