Used Dixi Baler – Baling Press for sale (12,648)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, Equipment: documentation/manual, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Nodpfszd R Evsx Ac Tscu Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. Nodpfx Aozbxwiec Tscu The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Nsdpfx Aov Akcisc Tscu Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Year of construction: 2008, condition: good (used), Horizontal baling press Build in 2008 Ncjdpfog Ibt Nex Ac Tsu Bale size 800x1000x1400 Loading height 1250mm

Condition: ready for operation (used), Pressing force 60s tons Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Ncjdpfxjra Nqhe Ac Tju Press weight approx. 2,430 kg Bale weight up to 500 kg Oil heating Motor 7.5 kW Brand new exhibition unit costs 11,000 EUR

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4 kW Connection voltage: 400/50 V/Hz Pressing force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Nedpora Aghsfx Ac Tecu Filling opening W x H: 107 x 62 cm Loading height from floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions W x D x H: 152 x 95 x 197 cm Weight: 850 kg Year of manufacture 2003-2005 costs 3000 EUR Year of manufacture 2006-2009 costs 3500 EUR Year of manufacture 2010-2013 costs 4500 EUR Year of manufacture 2016-2018 costs 5000 EUR

Condition: good (used), Baler Hsm 155.1 vl Pressure force:, 18 tons, Unit pressure:, 2.33 kg/cm², Ncodpfxev Alacs Ac Teu Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Power supply:, 400 V/4 kW, ,

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Nsdpfxjv Ai Tgs Ac Tjcu Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS, PAPER PRESS, FOIL PRESS, BALING PRESS Immediately ready for use, good condition Used & good / see photos Njdpslc Du Nsfx Ac Tocu Model: HSM 500.1 VL Machine No. 6135.244.P Serial No. 220109689 Pressing force 50 tons V 400; Hz 50 kW 7.5 Amps 15.5 Pressing power 6 tons Year of manufacture 2001 More presses in our other offers Item used and good / roughly cleaned (Plug it in and you're ready to go) Dimensions: On request!! Additional photos show further possible uses. All items shown in the photos are also available from us. Price quoted net per piece upon collection from warehouse 47441 Moers Current stock: 1 piece Inspection is expressly offered. More equipment in stock see photos or inquire by phone General: We are offering articles from various acquisitions, which we describe as well as possible and provide informative photos. No further information can be provided about the item. We offer the possibility of inspection on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone appointment. If required, the item can be taken away immediately. Due to time constraints, we can only answer questions about this item if you provide us with a telephone number in your inquiry. Unless explicitly stated, this offer is for USED GOODS. Any packaging may be damaged. Items have been visually inspected and are technically in order as far as possible. All offers are ex warehouse 47441 Moers. If you would like shipping, please contact us to discuss packaging and shipping costs. If you are interested, please do not hesitate to call us. All dimensions are approximate. Errors and omissions in the description are expressly reserved.

Condition: ready for operation (used), Brand: HSM Ncodpfxezg Dpto Ac Tju Type: V-press 860 plus Year of manufacture: 2012 Pressing force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. Ncodpfxjy S Rqwo Ac Tju The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Ncedpfjy R Nnfex Ac Tju Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Njdpfszdn H Rox Ac Tjcu Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Ncjdpszaqymefx Ac Tou Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm × 65 cm Condition: very good! Video of the machine in operation available upon request. Transportation is also possible.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping Nsdpsvq Rtkofx Ac Tecu - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm Nedpsyim Ayjfx Ac Tecu • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: good (used), Manufacturer: Comp Nodpfoh Eic Aox Ac Tecu Type: SB5 Motor: 2.2 kW Stroke length: 500 mm Chamber size: 500 x 350 x 400 mm

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Year of manufacture: 2012 Ncjdpox D U N Sefx Ac Tsu

Condition: used, Year of construction: 2012, operating hours: 53,154 h, functionality: fully functional, pressing force: 120 t, filling opening width: 1,800 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 730 mm, total width: 4,700 mm, total height: 4,600 mm, total length: 13,100 mm, overall weight: 28,000 kg, warranty duration: 12 months, Equipment: documentation/manual, For sale is a bale press, model "EP 1000 V5 H3," manufactured in 2012, featuring both horizontal and vertical tying mechanisms. The pictures show the machine in its assembled state. It is currently located at our facility in Lathen. Ncedpfxezggd Ts Ac Teu The press is sold without a conveyor belt. Prior to delivery, the machine will be completely overhauled and technically refurbished by our qualified technicians. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of relevant machine components • Evaluation of all wear-related components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and fasteners • Inspection of electrical components and safety devices • Inspection and readjustment of the tying mechanism • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Through this comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We would be happy to provide you with further information, photos, or a customized offer. If you are interested, please do not hesitate to contact us.

Condition: used, Year of construction: 2010, operating hours: 4,054 h, functionality: fully functional, pressing force: 90 t, filling opening width: 1,450 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 730 mm, total width: 2,500 mm, total height: 3,850 mm, total length: 12,000 mm, overall weight: 23,000 kg, warranty duration: 12 months, power: 90 kW (122.37 HP), Equipment: documentation/manual, For sale is a baling press, model "EP 6100 V5", manufactured in 2010. Prior to delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operations. The overhaul includes, but is not limited to, the following services: • Disassembly and inspection of relevant machine components • Assessment of all wear-related components Ncodpfx Acszggans Tsu • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of electrical components and safety devices • Inspection and readjustment of the bale tying mechanism • Cleaning, assembly, and commissioning of the overhauled machine • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baling press Dixi 60 SLD, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available for you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and for any errors. Nedpfxszgvbuj Ac Tecu The offer is subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: used, Year of construction: 2009, functionality: fully functional, pressing force: 60 t, filling opening width: 1,000 mm, filling opening length: 1,450 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, total width: 2,500 mm, total height: 3,500 mm, total length: 9,255 mm, overall weight: 14,000 kg, warranty duration: 12 months, transport height: 2,587 mm, transport width: 2,500 mm, transport length: 6,645 mm, Equipment: documentation/manual, For sale is a bale press, model EP 6000 V5, manufactured in 2009. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the demands of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the bale tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. Ncsdpfx Acjzgf Hge Teu We would be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: good (used), Year of construction: 2016, operating hours: 1,060 h, functionality: fully functional, Baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Ncodpey Ni Shefx Ac Teu Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. The hydraulic hoses should be replaced. We will gladly answer any questions you have about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available to you from 08:00 to 13:00. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Bale press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Nedpfx Acjy Ni I As Tscu Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. We will be happy to answer any questions you may have about the machine by telephone from Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baling press Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Dixi Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 23 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, cardboard, film The press is in good, fully functional condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. We will be happy to answer any questions you may have about the machine by phone, Monday to Thursday from 8:00 a.m. to 2:00 p.m. On Friday, we are available to you from 8:00 a.m. to 1:00 p.m. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. Ncodey Ni Hrjpfx Ac Tou The sale is made against advance payment, ex works, without warranty.