Used Dmg Universal Machine Center for sale (69,105)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,206 h, functionality: fully functional, machine/vehicle number: 20170708, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 18,000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (with adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotational drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Gisdpfey I Tvnsx Alxst Total coolant capacity: max. 425 l Operating Hours Control on-time: 20,248 h Machine on-time: 19,424 h Program run: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle chiller Kessler swing, 800 mm turning diameter, fully utilizable with zero-point clamping system Note: The touch probe is not included in the offer. The holders, however, are part of the offer.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, Important information: Auction extended by 14 days. Controller has been subsequently identified as HEIDENHAIN iTNC 530. Previous specification: TNC 426. A new spindle was installed in January 2025! The machine has been regularly maintained! TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feeds Giedpfxoy Dgyfo Alxet Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) vertical: 10,000 rpm Spindle speed S1 (continuous operation) universal swivel head 2-axis: 18,000 rpm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (–15%, +10%) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design Precision linear guides and ball screws Generous workspace with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, die, and machine building Documentation and acceptance certificate according to ISO standards Tool changer Cooling system Chip conveyor Swiveling milling head with 4th/5th axis

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: F 36905, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 2,000 rpm, controller model: HEIDENHAIN TNC 360, The protocol of the geometric acceptance is attached! TECHNICAL DETAILS X-axis travel: 7,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm Rapid traverse x/y/z: 10 m/min Table size: 8,000 x 1,300 mm Table load capacity: max. 4 t/sq.m Universal head: 5x90 plus manual 1 Tool holder: SK 50 Milling spindle speed range: 20 - 2,000 rpm Drive power: 30 kW Spindle torque: 2-speed gearbox, 750 Nm MACHINE DETAILS Control system: HEIDENHAIN TNC 360 Total power requirement: 50 kW Dimensions & Weight Installation space approx.: 9.0 x 3.8 x 4.6 m Machine weight approx.: 25 t Gjdpfxey Rrbhs Alxjit EQUIPMENT Orthogonal milling head, water-cooled 3D wireless probe M&H 20.41 Partition wall for parallel operation/setup Internal air blast Internal coolant supply 15 bar Adapter for high-speed milling spindles with torque support Travelling operator platform Chip conveyor Electronic handwheel HR 410 Monitored safety fences Various optional accessories (angular milling heads, clamps, etc.)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Gsdpjyf Ncqsfx Alxjit Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 115 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 150 mm, feed length Z-axis: 115 mm, spindle speed (max.): 18,000 rpm, We offer this used Tekna 426 universal machining center, year of manufacture 2003. Manufacturer: Tekna Model: 426 Year: 2003 Machining range: X-axis: 3200 mm Y-axis: 150 mm Gedpfx Aljyzfc Toxjit Z-axis: 115 mm C-axis: -90° to +90° The machine is currently operational. Various spare parts are included. If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: not inspected (used), Year of construction: 1986, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 6,000 kg, Heidenhain TNC 426 900x700 mm universal table Travel: 850x700x600 mm Max spindle speed: 6000 rpm Gsdpfx Ajyt Nxuslxoit Weight: 6000 kg

Condition: used, Year of construction: 2005, travel distance X-axis: 730 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 560 mm, table width: 500 mm, table height: 500 mm, spindle speed (min.): 10,000 rpm, We can offer you a 5-axis Mazak Variaxis 730-5X with Palletech system. Godpfx Asy Ryylelxeit Technical data: Maximum workpiece diameter x maximum workpiece height: 730 x 500 mm Pallet size: 500 x 500 mm Number of pallets: 12 (Palletech High-rise) X-axis travel: 730 mm Y-axis travel: 850 mm Z-axis travel: 560 mm A-axis (table tilt): +30/-120° C-axis (table rotation): 360° (indexing 0.001°) Spindle speed: 35–10,000 rpm Spindle motor: 30/22 kW Tool changer: 120 Tool type: BT 50 If you have any questions about the machine or would like to schedule an inspection, please do not hesitate to contact us by phone or email.

Condition: used, Year of construction: 2018, x-travel 750 mm Gijdpfx Aoyrt A Ielxst y-travel 660 mm z-travel 650 mm Control Siemens spindle tunring speed 12.000 U/min tool taper HSK 63 The machine was used for machining aluminum and, in our assessment, is in good used condition. It can be inspected under power by appointment. Technical features & accessories: - Twin spindle - 5-axis - Pallet changer Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm Gjdpfxexq R E Ne Alxsit max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Kuka KR200-3 comp Robot Three identical machines are available. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), Year of construction: 2003, Immediately available ex works: Gjdpfx Ajy R N U Sslxsit 5-axis (3 plus 2) machining centre Deckel Maho Type DMU 35 M Year of manufacture: 2003 Siemens 810 D control Electronic handwheel Universal tilting/rotary table 400 x 290 mm Travel X/Y/Z: 350/240/340 mm Spindle taper SK 40 Spindle speeds: 20 – 6300 rpm Drive: 6.3/10 kW Table load: 100 kg Rotation range: 360 degrees Swivel range: plus 105 / minus 15 degrees Distance spindle nose – table: 145/485 mm Feed rates up to 3000 mm/min Weight: 1750 kg Price: Euro 4,500.—plus VAT ex location

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex-site: 5-Axis Machining Centre Deckel Maho Model: DMU 50 M Year of manufacture: 2001 Control system: Heidenhain TNC 124 5 axes (3 + 2) Manual rotary axes with B and C swivel rotary table B and C axes are displayed on the control Table size: 700 x 500 mm Travel paths X/Y/Z: 500 / 400 / 400 mm Table load capacity: 200 kg Spindle taper: SK 40 Spindle speeds: 20 – 4,500 rpm Gisdpfx Aoy R N Uxolxet Drive power: 9 / 13 kW C-axis rotation range: 360 degrees Swivel range: plus 95 / minus 10 degrees Feed rate up to 5,000 mm/min Spindle speeds: 20 – 4,500 rpm Weight: 3 tonnes Coolant system Price: EUR 8,500.— net, ex-site, plus VAT.

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 500 mm z-travel 500 mm total power requirement --- kW Gjdjycxinspfx Alxsit weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 400 mm z-travel 375 mm total power requirement --- kW weight of the machine ca. 7,6 t Giedjycxihjpfx Alxst dimensions of the machine ca. --- m

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: DMU 50 3rd Generation Year of manufacture: 2019 Control system: Heidenhain TNC 640 Technical specifications: Travel distances: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Gjdpfoy Rx Stox Alxoit Speed range: 0 – 20,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Worktable: Swivel rotary table, simultaneous operation: D 650 x 500 mm Tool changer: Tool holder: CAT 40 (conversion to SK 40 possible) Number of tool stations: 60 positions Operating hours: approx. 13,500 h Spindle hours: approx. 5,300 h Technical features & accessories: - Active spindle cooling - Direct position measuring system in X, Y, Z, B, C - Scraper-type chip conveyor - Internal coolant supply (ICS) 40/80 bar, consisting of: - Paper band filter - 980 l tank - Cabin roof - Rotary union in the spindle - Blowing air through the spindle center - Dual switch filter - Rotating inspection window - Rinsing gun for chip flushing - Oil and emulsion mist separator - Infrared measuring probe, make: Renishaw PP 60 optical (OMP 60) - Tool breakage control IRS2 - Preparation for 3D quickSET - MPC (Machine Protection Control) - Operating mode 4 - Coolant temperature control for ICS system Accessories, depicted tools, and clamping devices are only included in delivery if specified in the additional information. Subject to change and error in technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control – TOP Condition Technical Data: >> Year of manufacture: 2006 >> Control: Heidenhain iTNC 530 >> Travel (X/Y/Z): 500 / 450 / 400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feed rate steplessly programmable in X, Y, Z: up to 20,000 mm/min C and B axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y/Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 tool positions >> Clamping surface: Ø 500 x 380 mm Distance between T-slots: 63 / 14H7 >> Table load: 200 kg >> Dimensions and weight (approx.): Machine without control panel and accessories Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> High-pressure coolant supply (IKZ) 40 bar >> Coolant purification system (fleece filter system) >> Rinse gun Gisdjy R Dgpopfx Alxet >> Visiport >> Measuring system with air purge >> Prepared for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all cooling and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers etc. fully cleaned. >> Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in excellent condition. The main spindle has been overhauled (exchange spindle), fully serviced, and an acceptance protocol is available. Invoices for the overhaul totaling €42,000 (net) are available. You are welcome to view and test the machine under power at our premises.

Condition: used, Year of construction: 2012, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Siemens 840 D rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper HSK 63 Tools changer 38 fach/tools Internal cooling system 80 bar total power requirement 43 kVA weight of the machine ca. 10,6 t Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip Gisdpfx Aeyxy E Rslxet conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Condition: good (used), Year of construction: 2017, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, 5-axis machining center DMG MORI CMX 50 U including robot Year of manufacture: 2017 Control unit: Siemens Operate Technical Data Travel paths: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110° C-axis: 360° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Drive power – main spindle (100/40% duty cycle): 13 / 9 kW Worktable: Table size: Ø 630 x 500 mm Tool changer: Number of tool stations: 30 positions Feeds: Rapid traverse (x/y/z): 30 m/min Operating hours: Spindle hours: Technical features & accessories: - Direct absolute measuring system in x, y, and z, including air purge - Blowing air switching via M-function - Production package, consisting of: Gjdpfx Alsy Ry N Texoit • Internal coolant supply 12 bar • Chip conveyor, tank 250 L • Enclosure roof • Tool changer door can be opened • Signal lamp • Touch probe PP40 • Tool measurement TS27R • Tool breakage monitoring Robot ROBOJOB Type: Mill-Assist-E Year of manufacture: 2018 Spindle bearings replaced in autumn 2025.

Condition: used, functionality: fully functional, We offer this used Hahn+Kolb MH700 milling machine, year of manufacture unknown. Giedpfxjy Nkams Alxot Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: A Main fuse: 15 A Wiring diagram no.: 7102 If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 Gijdpfewlhvwex Alxjt control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Condition: not inspected (used), Year of construction: 2016, operating hours: 21,228 h, machine/vehicle number: 127300000073, travel distance X-axis: 2,100 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,250 mm, overall weight: 46,000 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 80 bar, 5-axis CNC universal machining center with controlled B-axis and NC rotary table (C-axis). Large working area approx. 2,100 x 2,100 x 1,250 mm. Equipped with a powerful SK50 spindle (52 kW, 430 Nm, up to 12,000 rpm) and internal coolant supply up to 80 bar. Tool changer with 60/63 positions (chain/wheel magazine, double gripper). Gsdpfsyxmicsx Alxoit Very well equipped with Blum Laser, 3D quickSET, ACC, and MPC. Including chip conveyor, oil mist separator, and coolant system. Control ON: 47,888 h – Operating hours: 21,228 h

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 19859, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 44 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 31i, total height: 3,200 mm, total length: 7,000 mm, total width: 6,000 mm, rotary table diameter: 500 mm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 62 A, Equipment: chip conveyor, documentation/manual, MATSUURA NX-520 Universal Machining Center - Tool holder: SK 40 - A-axis travel: -125° to +10° - C-axis travel: 360° - 5-axis NC rotary table: 500 mm diameter - Includes the tool holders shown in the photos! - Includes coolant system, extraction unit, and chip conveyor Note: The machine vice visible on the rotary table is not included in the scope of delivery! Gisdpfxsy I Sq Ro Alxet Note: The machine can be transported on a truck up to 2500 mm wide! Note: The item must be collected between 24.08. and 27.08.2026 on a binding, prearranged date. FCA D-61352 Bad Homburg – loaded onto truck

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAN 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle axis: -20 to 430 mm - Distance between B-axis center and spindle axis: 4 - 410 mm - Distance between B-axis center and spindle axis: -10 mm - Distance between pallet centerline and bed zero point: 265 mm - Distance between pallet centerline and Y zero point: 180 mm - Spindle bearing inner diameter: 70 mm - Tool clamping force: 7.0 kN Giodpfx Asy I Sfhslxot - B-axis feed rate: 30/min - C-axis feed rate: 50/min - Max. tool diameter: 80 mm, up to 150 mm with adjacent stations free The machine is equipped with a chip conveyor and a coolant system. Note: Includes the tool holders installed in the tool changer! Note: The machine can be transported on a truck with a width of up to 2,700 mm! Note: The item must be collected bindingly at a date to be coordinated between 24.08. and 27.08.2026. FCA D-61352 Bad Homburg – loaded onto truck

Condition: good (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, rapid traverse X-axis: 20 m/min, controller model: Siemens Sinumerik 840 D, total height: 2,100 mm, total length: 3,800 mm, total width: 3,600 mm, table load: 100 kg, rotational speed (max.): 15,000 rpm, overall weight: 1,600 kg, For sale is a 5-axis machining center from DMG, model DMU 35 M, equipped with two manual axes. The machine is in good condition. Technical specifications: DMU 35 M Year of manufacture: 2001 X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Spindle speed: 15,000 rpm Feed rate: Infinitely variable up to 5,000 mm/min Rapid traverse: 20 m/min Clamping surface: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool holder: SK 40 Tool clamping: pneumatic/mechanical Required space: 3,800 x 3,600 x 2,100 mm Giedpfx Aljy Nz Nrsxjt Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be arranged for an additional charge, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Gjdsygx Hnopfx Alxoit Invoice and test protocol available!

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,391 h, functionality: fully functional, machine/vehicle number: 11160000853, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-Axis Travel: 600 mm Y-Axis Travel: 700 mm Z-Axis Travel: 600 mm Maximum Spindle Speed: 12,000 rpm X-Axis Feed Rate: 20 – 15,000 mm/min Y-Axis Feed Rate: 20 – 15,000 mm/min Z-Axis Feed Rate: 20 – 15,000 mm/min Rapid Traverse X-Axis: 40 m/min Rapid Traverse Y-Axis: 40 m/min Rapid Traverse Z-Axis: 40 m/min Linear Scale Resolution X-Axis: 0.001 mm Linear Scale Resolution Y-Axis: 0.001 mm Linear Scale Resolution Z-Axis: 0.001 mm Input Increment X-Axis: 0.001 mm Input Increment Y-Axis: 0.001 mm Input Increment Z-Axis: 0.001 mm Positioning Accuracy X-Axis: 0.01 mm Positioning Accuracy Y-Axis: 0.01 mm Positioning Accuracy Z-Axis: 0.01 mm Tool Holder: SK 40 NC Rotary Table Clamping Surface Diameter: 630 mm Max. Table Rotation Speed: 10.7 rpm Table Feed Rate: 3,600 /min Table Scale Resolution: 0.001 MACHINE DETAILS Control Manufacturer: Heidenhain Recorded Spindle Hours: 18,391 h Operating Voltage: 400 V Gjdpfx Aoy Ni Aaslxsit Frequency: 50 Hz Rated Current: 80 A Connected Load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Machine Weight: 10,000 kg EQUIPMENT 60-station tool changer Chip conveyor Cooling system