Used Door Closer for sale (10,174)

Condition: excellent (used), Door closer, floor door closer, closing mechanism -Manufacturer: GU BKS, floor door closer UTS 42, unused, original packaging -Item No.: 50031099 -Door width: 1100 mm Csdpfotzrfrox Adrerh -Quantity: 1x door closer available -Cardboard dimensions: 360/100/H95 mm -Weight: 3 kg

Condition: excellent (used), Door closer, floor door closer, closing mechanism -Manufacturer: Geze, Pendulo C door closer, unused -Function: Swing door 90 DEGREE - only locks at 0 degrees - 90 DEGREE .: 3000-002336 H06-14-00-00 Credpfx Ajxd Tzaodroh -Number: 42 door closers available -Price: per piece -Dimensions: 315/45/H65 mm -Weight: 1.3 kg

Condition: used, Door closer, floor door closer, locking body -Manufacturer: Geze, floor door closer closing body type TS 500 NV, unused Ovp -Article No.: 0672-CPR-0121 -Number: 11x door closers available -Price per piece Crodpfx Adetu Rlfsroh -Dimensions: 300/90/H80 mm -Weight: 3 kg

Condition: used, door closer, floor door closer, closing body -Manufacturer: Geze, floor door closer closing body type TS 500 NV .: 0672-CPR-0121 -Dimensions: 270/70/H65 mm Cjdpfxjuxg N Ie Adrerh -Weight: 2.8 kg

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Crsdpfx Aswt R Dmjdrjh

Year of construction: 1988, condition: used, Olma Combi Door Panel Line (1988), Panel Dimension Length Min/Max 330/1320 x 538mm Width, Cycle Time 17 Seconds, Dimension of Sheet Min/Max Length 390/1400mm x 600 Width x 0.5mm Thickness Cedez I Szqjpfx Adrsrh Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Year of construction: 1982, condition: used, Sapim Door Panel Line (1982), Panel Dimension Min/Max Length 490/1730mm x 538mm Width, Cycle Time 13 Seconds, Dimension of Sheet Min/Max Length 550/1800mm x 538mm Width x 0.5mm Thickness Credpfxoz I Sx Ao Adreh Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: like new (used), Li-ion Battery – Safety Cabinet – Fire Protection Cabinet PRIOLION Type LI92.195.120.07.4, as new 🧰 Product Features • Manufacturer: Priolion Crsdpfx Asw Hw S Redrsh • Type: LI92.195.120.07.4 • Condition: as new, see photos • Color: Light gray – RAL 7035 • Dimensions: 232 x 66 x 225 cm • Weight: approx. 706 kg • Fire resistance: up to 90 min • Year of manufacture: 2024 • Permanently self-closing doors with oil-damped door closers • Two-door design, two swing doors with center stile • Doors can be operated and locked with one hand using a profile cylinder • Corpus color: light gray RAL 7035 • GS and CE certified • Test requirements & standards: o DIN EN 1363-1 & DIN EN 1363-2: Fire resistance tests o DIN EN 14470-1 & DIN EN 14470-2: Fire-resistant storage cabinets o DIN EN 16121: Storage furniture for non-residential areas o DIN EN 16122: Storage furniture for residential and non-residential areas o DIN EN ISO 13854 • Includes: 4 grid shelf panels, base collection trays, and power strips, high-quality surface (CPL) inside and out, made of non-combustible building material class A2 - s1, with control unit (optical and acoustic status display), with integrated smoke detector in the cabinet interior (activates automatically in the event of a fire), plug-and-play design for connection to the power grid, with surge protection, closing of the supply and exhaust air in the event of a fire; 💰 Price € 7,900,- net excluding VAT / New price over € 12,000,- • Quantity discounts: on request • Shipping costs: Europe-wide, on request • Delivery time: Immediately available • Inspection and collection: possible at any time by arrangement Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.) Lenox Trading – Top storage technology & heavy-duty shelving, used & new Description text: Are you looking for high-quality storage racking for purchase? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel platform structures immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND CORE BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round package: 1. Lump sum purchase: Purchase of commercial goods, equipment & complete inventory including thorough cleaning. 2. Commission auction: Condu

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F210110, warranty duration: 12 months, compressed air connection: 6 bar, year of last overhaul: 2026, F2008 AUTOMATIC CARTON ERECTOR Codpez Dwiljfx Adrjrh CARTON DIMENSIONS: - Length: min. 220 mm - max. 800 mm - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Siemens S71200 PLC control - Performance: 720 cartons/min (depending on carton length and quality) - Carton magazine: 110 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start/stop via photoelectric sensor - Venturi vacuum system: 25 m3/h, 700 mm Hg - Mains voltage: 400V, 3-phase, N, PE - 50/60 Hz - Protection rating: IP 54 - Compressed air: 6 bar - Air consumption: 22 nl - Operating environment: +5°C - max. +35°C - Working height: 650 mm, adjustable by +30 mm - Weight: 490 kg - Dimensions of erector including sealer in mm (l x w x h): 2,636 x 2,164 x 2,008 - CE safety protection The system includes a GEM B50 carton closer. GEM B50 CARTON CLOSER WITH SIDE DRIVE BELTS FOR CONSISTENT CARTON SIZE CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ - Width: min. 100 mm - max. 520 mm - Height: min. 100 mm - max. 520 mm TECHNICAL DATA: - Drive and guide belts: vertical - Carton size adjustment: manual - Closing unit: bottom - Standard version: T22 / T23 - Adhesive tape width: from 38 to 50 mm, depending on the unit - Tension adjustable - Max. adhesive roll diameter: 360 mm - Core of adhesive tape roll: 76 mm - Mains voltage: 400V, 3-phase, N, PE - 50/60 Hz - Consumption: 0.25 kW - Protection rating: IP 54 - Operating environment: +5°C - max. +35°C - Transport speed: 22 m/min - Average production: 1000 cartons/hour - Working height: 650 mm - Weight: 85 kg - Dimensions of erector including sealer in mm (l x w x h): 2,636 x 2,164 x 2,008 - CE safety protection: side sheet metal covers with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) The image may include optional features that incur additional costs.

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F210118, warranty duration: 12 months, compressed air connection: 6 bar, year of last overhaul: 2026, F2000 AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length: min. 220 mm - max. 600 mm - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Siemens S71200 PLC control - Performance: 840 cartons/min (depending on length and quality of the carton) - Carton magazine: 110 cartons Crodpoz Dwakefx Adroh - Control panel: HMI digital, Kite model 7'' - Automatic start/stop via photoelectric sensor - Venturi vacuum system: 25 m3/h, 700 mm HG - Mains voltage 400V, 3-phase, N, PE - 50/60 Hz - Protection class IP 54 - Compressed air: 6 bar - Air consumption: 22 nl - Operating environment: +5° C - max. +35° C - Working height 650 mm, adjustable +30 mm - Weight 490 kg - Dimensions of erector incl. closer in mm (l x w x h): 2,435 x 2,110 x 2,210 - CE safety protection The system includes a GEM B50 carton closer. GEM B50 CARTON CLOSER WITH SIDE DRIVE BELTS FOR CONSISTENT CARTON SIZE CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ - Width: min. 100 mm - max. 520 mm - Height: min. 100 mm - max. 520 mm TECHNICAL DATA: - Drive & guide belts, vertical - Carton size adjustment, manual - Closing unit, bottom - Standard design T22 / T23 - Adhesive tape width: from 38 to 50 mm, depending on the unit - Tension adjustable - Max. adhesive roll diameter: 360 mm - Core of adhesive tape roll: 76 mm - Mains voltage 400V, 3-phase, N, PE - 50/60 Hz - Consumption: 0.25 kW - Protection class IP 54 - Operating environment: +5° C - max. +35° C - Transport speed: 22 m/min - Average production: 1000 cartons/hour - Working height: 650 mm - Weight: 85 kg - Dimensions of erector incl. closer in mm (l x w x h): 2,435 x 2,110 x 2,210 - CE safety protection: side sheet metal covers with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) The image may include optional features that incur additional costs.

Condition: used, This listing is for a Labcold RLPL04043 Refrigerator. The unit is in full working condition and is ready for immediate release. The Labcold RLPL04044 is a compact, efficient solution for anyone requiring precise cooling in space-limited environments, from commercial kitchens to medical facilities. Here’s a closer look at its impressive features: Key Features and Benefits: - Compact Dimensions: Standing at 842mm high, 475mm wide, and 448mm deep, this refrigerator is designed to fit neatly under most counters, maximizing your workspace. - Lightweight Design: Weighing just 22kg, it’s easy to install and relocate, making it a user-friendly choice for busy kitchens or labs. Codpexxyhisfx Adrjrh - Practical Storage Capacity: With 92 litres of storage space, it’s ideal for sensitive materials such as medications or perishable ingredients that need regulated temperatures. - Temperature Range: Operates within a precise range of +0ºC to +10ºC, ensuring that your stored items remain at optimal conditions for freshness and efficacy. - Adjustable Shelves: Comes with two adjustable shelves, enabling you to customize the interior layout to fit various sizes of containers, from small jars to larger boxes. - User-Friendly Features: Solid Door Design: The solid door effectively insulates against external temperature changes, maintaining a stable internal environment. - Automatic Defrost Function: Prevents ice build-up without manual intervention, improving efficiency and ensuring consistent performance. - Enhanced Usability and Safety: Electronic Temperature Controller with Digital Display: This allows for real-time monitoring and easy temperature adjustments, eliminating guesswork and ensuring contents are always stored properly. - Under Bench Configuration: Its design promotes a tidy work area by utilizing underutilized space, keeping your environment organized and clutter-free. Technical Specifications: - Durable Construction: Built to withstand the rigors of frequent use, making it a reliable choice in high-demand settings such as busy kitchens and medical facilities. - Operational Efficiency: The auto defrost feature minimizes maintenance, allowing you to focus more on your work and less on equipment upkeep.

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large air conditioning (HVAC) systems where high efficiency and ease of maintenance are paramount. Technology Patented BACross III fill system, which allows for easy inspection of the fins to prevent biological growth (e.g., Legionella). Main Features of the S1500E Series Maintenance Access: A large, inward-swinging access door, as well as internal maintenance platforms, allow technicians to conveniently perform inspections while standing inside the unit. Hygiene Control: The design minimizes standing water and protects against sunlight through special air inlet elements, which reduces algae growth. Flexibility: Thanks to the single-sided air inlet, the cooling tower can also be installed in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Crodjynkbmspfx Adrsh Industrial Cooling: Used in factories for process cooling. Air Conditioning (HVAC): Used in large building complexes as part of a central chilled water system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity because the actual performance depends entirely on the prevailing thermodynamic ambient conditions and the system temperatures. This model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the inlet warm water temperature (e.g., 35 °C) and the outlet cold water temperature (e.g., 29 °C). Air volume flow: According to the technical data from BAC, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three 11.0 kW fan motors. If this air volume is reduced by a frequency converter (e.g., during nighttime operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of cooling capacity the tower produces. Technical Data: Fan & Air Data Air volume flow: 60.0 m³/s (generated in draw-through operation) Fan motors: 3x 11.0 kW (axial fans) Technology: Integrated belt drive Water flow: 198 l/s Hydraulic Connections Water inlet (fluid inlet): 1x DN 250 (nominal size ND 250 mm) Water outlet (fluid outlet): 1x DN 300 (nominal size ND 300 mm) Make-up water connection: 1x DN 40 (ND 40 mm) Overflow / drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions & Weights Operating weight: 11,446 kg (including water filling up to the overflow) Shipping weight: 5,350 kg (empty weight) Heaviest single part: 3,

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,462 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 20,000 rpm, The machine spindle was replaced in 2022. Since then, the machine has accumulated approximately 6,500 operating hours. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 650 mm Travel range Z-axis: 500 mm Spindle speed range: 0–20,000 rpm Spindle speed control: stepless Tool interface: HSK 63 Magazine capacity: 30 Clamping area: 900 × 600 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,400 x 3,000 mm Weight: 10 t Operating Hours Machine operating hours: 54,796 h Spindle hours: 23,462 h EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system Cedpfsz Hwvdjx Adrorh 4 height-adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Cedpfx Adsz Hxb Uororh Jaw width: 100 mm EQUIPMENT Fixed angular table Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Chip conveyor 6 × Machine feet Operating manuals

Condition: used, Krauss-Maffei Door Foaming Carousel (Unused), Wet Box System, Fixture Dimensions Length x Width x Height 2300/950/200mm, Cycle Time 12 Seconds, 24 Foaming Fixtures, 2 x Mixing Heads, Mould Change Over/Storage System, ABBiRB 6700 Loading & Unloading Credpez I S Dfofx Adreh Location: These lots are located in Porcia, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2013, Hazardous materials container, REI 90 / F 90 fire protection storage type WFP, cantilever racks, internal lighting, loading ramp, leakage sensor – used - : Price ex location: €29,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of manufacture: 2013 Model: BMC-X 600-K-T90-2 Model: REI 90 / F 90 Fire Protection Storage WFP-X 14 Room system surface finish External coating: RAL 9002 grey white Internal coating: RAL 9002 grey white Door coating (both sides): RAL 9002 grey white Dimensions (mm) Internal | External (without attachments) Width: 2,560 | 2,952 Depth: 5,500 | 5,938 Height: 2,500 | 2,924 Sump capacity Steel sump: 1,560 litres Door placement: short side Stainless steel door handle with anti-panic function: 1 pc Technical ventilation fire protection system: 1 pc Exhaust air monitoring: 1 pc Door holding device single-leaf door: 1 pc Loading grate for pallet truck, WFP 14: 1 pc Cantilever racks: 8 pcs Ex-proof internal LED lighting 42 watts: 1 pc Steel loading ramp suitable for pallet truck: 1 pc Surge protection: 1 pc Leakage sensor SpillGuard Connect: 1 pc Emergency exit sign (fluorescent): 1 pc Control unit: 1 pc • Safety storage for water-polluting substances (WGK 1-3) as well as flammable, toxic, and oxidizing substances according to GHS • Roof and sidewalls made of fire-resistant cladding (EI120) with fire protection from both inside and outside. Floor fire protection via suitable substructure on-site • Roof drainage via integrated gutter with internal downpipes at each short side • Manufactured to DIN EN 1090-2 • Flexible indoor or outdoor installation on a concrete surface • Frame structure designed to meet static requirements • Constructive potential equalization by grounding the steel frame structure • Hot-dip galvanized steel sump made from S235JR (material no. 1.0038) to DIN EN 10025, 5 mm material thickness, corrosion protection for at least 5 years • Leak tightness test of the sump according to EN ISO 3452-1 with factory certificate • No ground clearance. Not suitable for underpassing by industrial trucks • Front lugs for securing the room system to the concrete base • Corrosivity class C3-M according to DIN EN 12944, part 1 • Single-color 2K PUR coating in RAL color tone • Self-closing fire protection door with overhead door closer and anti-panic lever set, lockable by cylinder lock with Euro profile 17mm • Convenient access thanks to low door threshold of 147 mm • Storage area with hot-dip galvanized, removable grating supports • Demountable transport brackets on the roof section Crsdsyzc Dhopfx Adreh II 2(1) Ex emb[ia] IIC T6) Cantilever racks Internal lighting Loading ramp Leakage sensor SpillGuard Connect Original price: €49,000 Condition: good – very good. No spills; only closed containers were stored inside. Availability: immediately Location: 79312 Emmendingen, Germany Detailed offer data available as PDF on request.

Condition: new, Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 1,000 mm, Fire-resistant doors, each door is new, unused, and of high quality, and is open for photography. 2 fire-resistant doors from Teckentrup Door Solutions (distributed by KAMO Crane and Gate Systems). Protective doors, steel doors, doors manufactured by Teckentrup, T30 FSA 62 (interior doors), single-leaf. DIN right-hand, 1000 x 2000 mm, primed RAL 9002 gray-white and 1 mm galvanized steel. The doors have never been installed. Frame (1 piece) for masonry 265 mm with GEZE sliding rails. 1 top – door closer, magnetic contact, and latch contact for status monitoring. Crsdpshf I Ewjfx Adrjh Lock with panic function, door handle set, 1 additional integrated electric door opener. Fire-retardant. The door leaf is 62 mm thick. Unused and in new condition for sale. Opportunity for optimal fire protection of interior spaces. Price negotiable. Our asking price is €1,150 net, ex-warehouse, plus packaging costs. All technical specifications are subject to typographical errors and omissions. Sale only to countries within the European Union.

Condition: used, mileage: 15,950 km, power: 120 kW (163.15 HP), color: black, gearing type: automatic, number of seats: 8, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Cjdpfxezpdgke Adrsrh A50 Front axle with increased load capacity, B25 Parking brake, electric, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CF7 Comfort chassis, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and attachments painted in vehicle color, CU4 Aerodynamics package, E07 Hill start assist, E1D DIGITAL RADIO (DAB), E1E Navigation, E4S Smartphone integration package, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in luggage compartment/cargo area, ES3 12V sockets for rear seat rows on the right and left, EW6 Pre-installation for Remote Services Plus, F2W Winter package, F3Z Comfort closing, F61 Interior mirror, F66 Lockable glove compartment, F68 Exterior mirrors, heated and electrically adjustable, FF1 Center console with storage compartment, FJ3 Double cupholder in the center console, FKB PANEL VAN, FP4 Chrome interior package, FY7 Multi-button remote control, G43 9G-TRONIC, H00 Warm air duct to the passenger compartment, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, HZ0 Auxiliary heater, electric, HZ7 Climate control system semi-automatically controlled, TEMPMATIC in the rear, IL5 Left-hand drive, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J2W Maintenance interval 2 years, J55 Seatbelt warning system for front passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, K51 Mis-fueling protection, KB5 Main tank 70 liters, L LEFT-HAND DRIVE, LA2 Headlamp Assist, LC8 Ambient lighting, tailgate, LD9 Interior light(s) in the rear, LE1 Adaptive brake light, LX5 Europe, M60 Generator 14 V / 250 A, M6A EMISSIONS STANDARD EURO 6E-BIS M1, M72 Vehicle capable of using HVO fuel, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MS1 Cruise control, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, P4F Rating country set Euro-NCAP, Q50 Trailer coupling, ball head, removable, QA4 Trailer load 2500 kg, RY2 Tire pressure monitoring system on front and rear axle, wireless, SA1 Seat cushion depth adjustment driver, SA2 Seat cushion depth adjustment front passenger, SA6 Airbag front passenger, SB1 Comfort driver's seat, SB2 Comfort front passenger seat, SE4 Lumbar support front passenger seat, SE5 Lumbar support driver's seat, SH1 Thorax-pelvis sidebag driver, SH2 Thorax-pelvis sidebag front passenger, SH9 Windowbags for driver and front passenger, SK2 Seat occupancy recognition driver's seat, SK6 Child seat recognition in vehicle, passive, T14 Active door closer, sliding door, T19 Sliding door, left, T70 Child lock on doors in the passenger compartment, T74 Grab handle for entry, U3V Seat arrangement vis-à-vis 1st row of rear seats, rails, U73 Armrests for seating in the passenger compartment, UR1 Seat rail system with quick-release mechanism, US4 3-seater bench seat, comfort, 1st row, outer seat foldable, US5 3-seater bench seat, comfort, 2nd row, outer se

Year of construction: 2007, condition: used, functionality: fully functional, Complete set of machines for the production of PVC joinery – sold ONLY AS A WHOLE. The set includes the following machines: Crjdpfx Adozxdf Ejrsh - CLEANING MACHINE Elumatec EV 834/01 (8340120611 - 11/2007) - MILLING MACHINE Elumatec GF 171/00 (1710821408 - 08/2008) - MACHINE FOR CUTTING GLASS HOLDERS PERTICI BS771 (05V150 - 2005) - WELDING MACHINE Elumatec ZS 720/00 (7200020800 - 12/2004) All machines are in good condition and fully functional. An industrial vacuum cleaner for PVC chips is also included as a bonus with these machines.

Condition: good (used), Year of construction: 2016, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66T Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66T graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66T Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66T graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in good condition. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66T Graphic CNC Control Condition: Good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66T graphic CNC control Cjdpfxszdak As Adrjrh Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 4,050 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 530 mm, clearance between the columns: 3,600 mm, oil tank capacity: 250 l, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, overall weight: 12,500 kg, number of support arms: 2, number of axes: 6, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Crsdjz Imc Nspfx Adreh Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: used, Year of construction: 2018, Turning machine for door panels Manufacturer: Kraft Year of manufacture: 2018 Credpfxoz A S H As Adrjh Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. Cjdsy Hl Iyepfx Adrsrh (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, The spindle was completely overhauled in 2025! The invoice for the spindle overhaul is attached. TECHNICAL DETAILS General Information Manufacturer: Konrad Seidler Model: MINIMAX 1800 Year of Manufacture: 2013 Machine Type: CNC rotary table turning, boring, and milling center Operating Mode: Single-shift operation Machine Weight: approx. 22,000 kg Control and Drive Control System: Siemens 840D SL Drives: SINAMICS 120 Turning Range and Rotary Table Turning Diameter: 500–1,270 mm Rotary Table Load Capacity: 6,000 kg Rotary Table Speed: 5–500 rpm Boring and Milling Spindle Boring/Milling Spindle Power: 30 kW Torque: 190 Nm Boring/Milling Spindle Speed: 2–2,500 rpm Boring/Milling Spindle Speed: max. 6,000 rpm Tool Holder: HSK100 Tool Changer Tool Changer: 16 tools Coolant System Coolant Pressure: 6 bar High-Pressure Coolant Pressure: 30 bar Chip Conveyor Chip Conveyor: Cross conveyor, discharging to the left Discharge Height: 1,200 mm Machine Enclosure Codpfjz Hmhiox Adrorh Enclosure: Double sliding door Work Area: Walk-in Spindle Overhaul Year of Spindle General Overhaul: 2025 Investment Costs: 36.5 thousand EUR EQUIPMENT Chip Conveyor Walk-in Work Area High-Pressure Coolant System Tool Changer with 16 Positions HSK100 Tool Holder Double Sliding Door Operating Manuals Installation Documents Wiring Diagrams, partially available Documentation of Machine Components Documents for the Control System Documents for the Chip Conveyor Other Original Documents from Commissioning Documents for the Spindle Overhaul Test Report of the Spindle Overhaul Extensively Overhauled Capellini High-Performance Spindle Renewed Precision Bearings Renewed HSK100 Clamping System Renewed Balluff Sensors Refurbished Spindle Shaft Renewed Wear Parts Finely Balanced Spindle according to ISO 1940 System-Balanced Spindle Assembly Chuck and Jaws

Condition: excellent (used), empty load weight: 5,260 kg, maximum load weight: 12,740 kg, overall weight: 18,000 kg, first registration: 04/2014, loading space length: 6,950 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 44.81 m³, total length: 7,280 mm, total width: 2,600 mm, total height: 3,900 mm, suspension: air, fuel type: diesel, fuel: diesel, Equipment: ABS, EBS, Key Features Internal Reference: 26389M Chassis Number: AH1814870814367 Vehicle Model: AH18 Vehicle Make: FABAG Product Category: Box Van Condition: Used Date of First Registration: 04/30/2014 Last Inspection Date: 04/10/2025 Fuel Type: Diesel Overall Vehicle Condition: Very good Suspension: Air-Air Csdpfx Ajz Hn E Aodrorh Hydraulic System: None Cab Vehicle Equipment: ABS, EBS Axles & Tires Axle 1: 385/65 R22.5, 10mm, Disc Brakes, Air Suspension Axle 2: 385/65 R22.5, 10mm, Disc Brakes, Air Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 18000 Payload: 12740 Unladen Weight: 5260 Vehicle Height: 3900 Vehicle Length: 7280 Vehicle Width: 2600 Body Body Manufacturer: FABAG Body Model: Climate-controlled Box Van Body Internal Dimensions (L x W x H): 6950x2480x2600 Body Manufacturing Year: 2014 Body Note: Manufacturer: FABAG, Model: Climate-controlled Box Van, Year: 2014