Used Double Bulk Feeder With Weight for sale (69,021)

Condition: good (used), Item: D-1035-Double bulk feeder with weight Lsdpjd Nk Ucofx Acfsaf Stainless Steel double bulk feeder with weight. Dimension: Vat L 1800 X W 850 X H 1300 mm Bigger lift: 460 mm, Small lift 100 mm, flight 80 mm L 2700 + weight 500 mm , Total L 3200 mm

Condition: good (used), D-1035-Double bulk feeder with weight Used Stainless Steel double bulk feeder with weight. Dimension: Vat L 1800 X W 850 X H 1300 mm Bigger belt: 460 mm, Small belt 100 mm, flight 80 mm L 2700 + weight 500 mm , Total L 3200 mm Laodpfx Acjn Nxqwofof

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder Ljdpfx Aeh R Tvtocfsaf double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive Ledswd Nthjpfx Acfsaf

Condition: used, 10-meter conveyor belt, width 0.55 m, inclination angle adjustable hydraulically. Lajdowz Nu Tspfx Acfjf

Condition: good (used), APPLICATION BELT with VIBRATING feeder Used machine A pneumatic slide valve from the vibro-feeding roller controls the dosing onto the application belt Overall dimensions: 2700 x 1300 x 2800 mm Ledotp Hd Uopfx Acfeaf Strap size 2400 x 140 mm Throat size: 1000 x 1300 mm Transport speed: 15 m/min

Condition: used, functionality: fully functional, screw conveyor length: 5,000 mm, pump capacity: 1,000 l/min, For sale is a flexible screw conveyor for bulk materials, with a 5-meter hose length, a three-phase motor, and a reduction gearbox. The unit does not operate within a rigid pipe but rather within a flexible plastic hose, making it easily transportable, versatile in use, and gentle on the material being conveyed (low dust and noise generation). Ledpfx Ajzrzkljcfoaf We purchased the unit used and tested it briefly. It proved unsuitable for our specific material (too moist for this hose type) but was always fully functional and ready for use. It is ideal for dry, free-flowing bulk materials such as grain, pellets, or sawdust/wood dust. It is not suitable for wood chips (too coarse/irregular for the hose). Equipment: - Flexible hose with a conveying screw made of spring steel - Inlet with protective grid and slide gate - Drive located at the top, with a three-phase motor and a flange-mounted reduction gearbox - Easily transportable, universally applicable - Connection cable with switch (6m) Technical data: Parameter Value Overall length 6 m Hose length 5 m Hose inner diameter 75 mm Smallest bending radius in operation approx. 1.5 m Conveying height up to approx. 3 m Conveying capacity approx. 1,000-1,200 kg/h (for grain) Motor Three-phase motor 400V / 0.75 kW Connection cable 6 m, with switch in the middle of the cable Plug CEE 5x16 (16A) Weight 42 kg Packaging dimensions (with pallet) 120 x 120 x 35 cm Scope of delivery: 1x Screw conveyor with gearbox and motor 1x Connection cable with switch Condition: Used, very little use, fully functional. No defects; simply unsuitable for our specific (too moist) material. Location: 6064 Kerns (self-collection; transport can be arranged).

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current (min.): 40 A, welding current (max.): 420 A, ESS Powermag 461 – Water-Cooled MIG/MAG Double wire feed 3 Months Warranty Refurbished, tested, serviced, and ready for immediate use. Specifications: 40-420 AMP 380 Volt Water-cooled Synergic 2/4 Step / 4 Roller drive Double Wire Feed 36 Steps adjustable Spot welding Fixed programs Including 2 MIG PRO5000 welding torches, earth work cable with clamp, gas cable, and +- 3 Meter Interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Laedpfx Acsznt Hqsfjf

Condition: good (used), machine/vehicle number: 2452, Year of construction: 2015, load capacity: 50,000 kg, total length: 6,000 mm, total width: 2,500 mm, operation weight: 3,400 kg, Tec Container 20" WITH DOUBLE-HOOK from Uniktruck Ledoyuhmtspfx Acfjaf

Condition: good (used), Trough conveyor belt Length: 32 meters Belt width: 65 cm Ljdpfx Acjzcyazsfsaf Can be disassembled into 3 parts 7.5 kW drive motor Good condition

Year of construction: 2006, condition: excellent (used), functionality: fully functional, KIREMKO BRSET660 | Double screw conveyor with hopper / Vertical conveyor Manufacturer: Kiremko Model / Type: BRSET660 Ledpfx Aszczqzocfsaf Serial number: 05-1070-AE Year of manufacture: 2006 Power supply: 400 V, 50 Hz, 3 phases Screw diameter: 600 mm Screw pitch: 250 mm Lifting / discharge height: 2800 mm Dimensions: 6800 x 2200 x 4300 mm Professional, high-performance double screw conveyor from the Dutch brand Kiremko – a global leader in the production of processing lines for the potato and vegetable industry. The device is designed for continuous operation in demanding industrial conditions. It is ideal for large fruit and vegetable processing plants (potatoes, root vegetables). The heart of the machine is a powerful, integrated buffer and feed hopper, working with two massive stainless steel screws with an impressive diameter of 600 mm and a pitch of 250 mm. This configuration prevents the material from "jamming," ensures even distribution, and allows for trouble-free transport of materials with varying particle sizes and high viscosity to a height of up to 2800 mm.

Condition: good (used), Item: D-1036-Bulk feeder. Laedpfxsn Nxpre Acfef ABK Sweden Type: STR 301 Stainless Steel bulk feeder with close vat at bottom. Discharge height: 2700 mm Dimension: L 3500 x H 2700 x W 1500 mm Vat: W 1500 x L 1450 x H 1350 Vat inside: W 900 x L1050 x H700 Flight height: 100 mm Belt width: 300 mm

Condition: excellent (used), Year of construction: 2003, Feeder Caps 8006 automatic disc feeder, sorting machine Ljdpfx Acog Rkwmjfeaf Fully automated, variable dosing speed, manual height adjustment. Stainless. Year of production: 2003 Power: 0.55kW max. dosing capacity: approx. 1000 pcs / min Diameter: 1400mm Siemens control. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: not inspected (used), Item: D-10737-Auger Bulk Feeder Stainless Steel Bulk Feeder with weight Stainless Steel auger Ø6" (150 mm). Dimension: Bulk L 980 mm X W 980 mm x H 700 mm Auger: Max H 2400 mm Discharge 1900 mm Opening at bulk top: 700 x 700 mm Lodpfx Aehn S Efscfoaf One side at wheels

Condition: refurbished (used), Scraper for chips/wood chips Carrier width: 640 mm Straight section: 4 m Inclined section: 4 m Laodpoy R Ugyefx Acfsf Completely overhauled

Condition: used, Duplo Ultra 300A UV Coater with SF-300 Feeder Removed from closed printshop. Was in full working order when disconnected. Would recommend machine benefit from a service. Sold Ex works. Any questions or need more photos please ask. Machine is in stock. Spec The Duplo Ultra 300A UV Coater is a high-speed, heavy-duty flood coating system designed for offline finishing of offset and digitally-printed materials. It standardly includes the high-capacity SF-300 Suction Feeder to handle production-level volumes. Core Technical Specifications The system is engineered to match the speed of modern digital presses while maintaining high-quality finishes. Maximum Speed: Up to 148 feet (45 metres) per minute. Maximum Paper Size: 20” x 28” (508 mm x 712 mm). Minimum Paper Size: 8.5” x 11” (215 mm x 280 mm). Paper Weight: 200 to 350 gsm. Coating Types: Applies High Gloss, Satin, or Matte finishes. SF-300 Suction Feeder Specifications The SF-300 Suction Feeder is the standard feeding unit for the offline "A" model. Lajdpfxsymgums Acfof Feeder Capacity: 7.5-inch pile height or approximately 90 lbs of paper. Feeding Mechanism: Top-feeding air suction belt designed for difficult or heavy stocks. Detection: Built-in double sheet detector to prevent jams and coating errors. Weight: The feeder itself weighs approximately 305 lbs

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: ABC 8.20, power: 1.47 kW (2.00 HP), fuel type: electric, Clay, sand, and soil feeder Lodpfx Aev Tlc Sscfjaf - consisting of an 800 mm wide, 2 meter long conveyor belt with a material receiving hopper of approximately 1 m³; - flow rate of 3.25 to 56 m³/h controlled by a frequency inverter - equipped with a lump breaker/picking arm mounted on a shaft to scrape the material and regulate the flow rate

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Laedpfx Ashlnzkocfof Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: excellent (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C 2202067, Pallet Box Tipper 120x80x90 Allows you to empty the contents of a pallet box fitted with wooden extensions. A pneumatic cylinder system locks the pallet onto the tipper. Maximum pallet weight to be tipped: 1000 kg. This ROTOVID 135° box tipper, model RV135, is ideal for completely emptying the contents of your boxes. With a 135° rotation, it allows efficient rotation and emptying of your containers. FEATURES OF THE ROTOVID 135° BOX TIPPER: - Rotation and return controls via hold-to-run push buttons - Side and rear safety guards - Electrically actuated check valves at cylinder exits - Floor fixing brackets - Receptacle size adaptable to your requirements - Fixed containment barrier - Customizable discharge height - Light curtains compliant with European standard ISO 13855 Lasdpfx Acexfg A Tefjf - Discharge chute - Fixed retaining bar - Discharge flap - HDPE coating - Protective grilles compliant with European standard ISO 13857 - Designed and manufactured in France

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls Lsdpfxswrw D Rs Acfsaf ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) — Siemens motors standard - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request CAPACITY BY DIAMETER (approximate, horizontal, cement powder): Lajdpoyq H Iuofx Acfsf - Ø114 mm → 4–8 m³/h - Ø168 mm → 10–18 m³/h - Ø219 mm → 20–30 m³/h - Ø273 mm → 30–40 m³/h - Ø323 mm → 40–55 m³/h All values depend on RPM, inclination angle, and material bulk density. Custom diameters and capacities available on request. APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ CE marked — compliant with EU Machinery Directive 2006/42/EC ✔ ISO 9001:2015 certified factory ✔ 12 months warranty — replacement parts shipped internationally ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) ✔ Trusted by: Coca-Cola | Unilever | Anadolu Efes | Limak Holding | OYAK | Cengiz İnşaat ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval PRICING REFERENCE: Entry-level unit Ø114mm — from €1,500 EXW Ankara. All diameters, lengths, and configurations quoted within 24 hours. REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule. Distributor and OEM partnerships welcome. Contact us to discuss exclusive regional agreements.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: Nο 5237 2/2002, working width: 300 mm, Equipment: documentation/manual, MAYER OVJA 1.6 ET 3WT is a premium double jersey transfer jacquard knitting machine, known for its exceptional capability in producing intricate designs and multi-colour striped fabrics. With a 30-inch diameter and an 18-gauge specification, this machine ensures the creation of fine, high-quality textiles suitable for various applications. The machine is equipped with 48 feeders, including 32 knitting (K) and 16 transfer (T) feeders, providing a consistent and smooth yarn feed that enhances production efficiency and fabric quality. The LGL compact design allows for optimal space management, making it an ideal choice for factories with limited floor space.Extra 48 memminger D 72277 feeders for lycra included in price. Manufactured in 2002, the OVJA 1.6 ET incorporates robust construction and reliable performance, making it a valuable asset for textile manufacturers seeking to produce superior fabrics with complex jacquard patterns and vibrant colours.The machine is in working condition full production.video is available in production Ljdpfxeybbrpj Acfsaf

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Features fan assist / air circulation (electric). Supplied with 15 x bakery racks. Located in Northern Ireland and ready to collect. Ledoxb Alvepfx Acfeaf Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Date of manufacture - 1992 ✅ Rating 500-000 General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Laedetz Dkaepfx Acfof

Condition: excellent (used), Year of construction: 2017, VUTEK H100 3.2m Fast LED Hybrid printer Speed exceeding 450 m²/h Color 6C (white disabled) Roll option 3.2m 2 tables under efi full service Lodpfx Acoza U Saofeaf new belt installed on 04-26 via efi Recently, 4 new printheads were replaced (defective solder joints on the nozzles).