Used Double Wheel Grinding Machine - Vertic. for sale (87,811)

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Iodpfx Ajxq Hkujn Iobc Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m One machine is suitable for rough grinding, and the other for finish grinding. The machines were used for the production of connecting rods. Isdsxq R Haopfx An Iobc In our assessment, the machine is in good used condition. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Ibsdpfoy R Drlsx An Ioc

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Iedpfxexuv Udj An Ijbc

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Ibsdpfxsxmhyis An Ijc Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. Ibsdovnmnrepfx An Ioc max. workpiece diameter: 250 mm

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Ibodpfx Ajt Hw N Hon Ioc Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, machine/vehicle number: 115698, total length: 12,200 mm, total width: 1,700 mm, total height: 2,000 mm, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, operating speed: 40 mm/s, pressure: 8 bar, The Bavelloni VE500 V10 is a beveling and edging machine with 10 grinding wheels for processing flat edges with a beveled edge and a variable angle on glass with a thickness of 3 to 51 mm. The Bavelloni VE500 V10 has been designed and built using the latest technologies. The machine grinds and bevels in a single processing cycle, ensuring high productivity and quality. Ibodpfx Anjz Ihdno Ijc Glass thickness: 3 ÷ 51 mm Minimum height of the workpiece: 70 mm Minimum height of the material being processed for a flat edge with a bevel, when using special holders: 50 mm Angle range: 0° - 45° Installed power: 27.7 Kw Minimum compressed air pressure: 8 bar Maximum compressed air consumption: 25 Nl/min Length: 12200 mm Width: 1703 mm Height: 3350 mm Weight: approximately 4500 Kg Processing speed: 0.5 ÷ 5 m/min Water tank capacity: 720 l

Condition: good (used), Year of construction: 1987, functionality: fully functional, Dear customers, we currently offer a very good, used vertical belt grinder for model and mold making, manufactured by F. Zimmermann. The technical details are as follows: Belt width: 250 mm Grinding height: 400 mm Belt length: 2,400 mm Ibjdpfx Ajz S Eiden Isc Belt speed: 18 m/s Work table: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Dust extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot-operated emergency stop - Machine light - Motorized table angle adjustment with digital display Price plus VAT, which will be shown separately on the invoice.

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 15 t Ibodpfsizldxjx An Ijc

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 91.0651.90.11D, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 800 rpm, type of input current: three-phase, grinding wheel diameter: 180 mm, overall weight: 1,000 kg, grinding spindle speed: 2,000 rpm, workpiece diameter (max.): 225 mm, We offer this Wendt OPRA 200V tool grinding machine in like-new condition, year of manufacture 2023. Iedpeyh Rkljfx An Ijbc Manufacturer: Wendt Model: OPRA 200V Year of manufacture: 2023 Condition: as new Category ID: 1166 Type ID: 307 Machine type: tool grinding machine If you have any questions or need more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. Ibedpexghngefx An Ijc When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 1989, Technical details: rotary table diameter: 630 mm grinding height: 350 mm grinding head - power requirement: 11 kW grinding length: 600 mm max. dia. of grinding wheel: 450 mm grinding spindle speed: 764 -1.485 steples U/min automatic feeds: 0,002 - 0,1 mm table speed: 8 - 128 steples U/min rotary table revolutions per minute : 8 - 128 stepless U/min rotary table: 630 +3° /-5° mm total power requirement: 18,5 kW weight of the machine ca.: 5,5 t dimension machine approx.LxWxH: 2,6 x 2,3 x 2,5 m Ibedoz E Hu Hjpfx An Iec The rotary table is tiltable. Heavy-duty industrial surface grinding machine from the German manufacturer REFORM, equipped with a horizontal grinding spindle and a large rotary table. The machine is suitable for precision surface grinding of rotationally symmetrical as well as large-area workpieces. The continuously rotating table ensures uniform machining of the workpiece surface. The machine is equipped with a large magnetic rotary chuck, a heavy-duty grinding spindle unit, automatic infeed and grinding movements, as well as a coolant system with filtration unit. Its robust and heavy machine construction is designed for continuous industrial operation and for applications requiring high standards of flatness and surface finish. Particularly suitable for grinding flat workpieces. *

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Ibsdpfx Anjxcx A Ts Ioc

Year of construction: 2019, condition: as good as new (ex-display), Quiet running, maintenance-free motor Ibsdpfoiiyq Hox An Iec Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Also other models available from stock! Inquire about the current stock.

Condition: used, Year of construction: 1995, Technical details: grinding height: -- mm grinding width: 220 mm grinding wheel diameter: 762 mm total power requirement: 90 kW weight of the machine ca.: 13 t grinding spindle 1 drive:: 37 kW grinding spindle 2 drive:: 37 kW Grinding machine for pre-grinding the connecting rod Isdpfewi Nh Nox An Ijbc With 2 replacement spindle motors *

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light. Ibjdpfxjz St Hws An Iec

Condition: used, Camam Horizontal and vertical double mortising machine. Isdpfx Aewt S E Esn Isbc 2 double horizontal spindles 3 vertical spindles right side 3 vertical spindles left side

Condition: used, Double tilting vertical cutting machine Ibjdpezxg Dksfx An Ijc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,600 kg, Electropneumatically controlled, segmented pressure shoes with a 30 mm segment width ensure a consistent grinding pressure across the entire workpiece width and can be further adjusted via the touch panel control. For final finishing: Smartflex lamellar disc for cross-grain sanding and for grinding radii. Technical data: Ibodpfxozxnate An Iec Working width: max. 230 mm Workpiece thickness: 10 to 230 mm Year of manufacture: 2025 Weight: 1,600 kg 400 V, 50 Hz, 32 A, fuse rating 35 A Directly from the manufacturer, inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Ibodpoz R Rbdofx An Ijc Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,214 h, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain 530, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Spindle nose – table: 120–730 mm Table size: 1,250 × 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW (40 %) Rapid traverse rate X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Isdpfxjz Im Tns An Iobc Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with free magazine slot: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control system: Heidenhain 530 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air: 3/8″, 6–8 bar Power supply: 400 V / 75 A / 35 kVA Coolant tank: 250 l Guideways X/Y/Z: 45/45/45 mm Machine weight: 7,500 kg Internal cooling (IKZ): 22 bar Program runtime: 12,214 h Spindle hours: 14,123 h Machine operating hours: 39,242 h Control system operating hours: 34,987 h EQUIPMENT Chip conveyor Electronic handwheel Internal cooling (IKZ) 22 bar Oil-cooled spindle Linear guideways X/Y/Z Machine bed made of cast iron Note: Machine is sold without tools and vise.

Condition: refurbished (used), Year of construction: 1975, DISKUS GRINDING MACHINE (Double-surface grinding machine) DISKUS WERKE AG (FRANKFURT / MAIN), Type DDS 600 P, Year of manufacture 1975, Ibedpfx Anezzpaao Ijc COMPLETELY OVERHAULED in 2024.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened Iodpfoyv Iqvsx An Iebc by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Iodpfsxpqy Rsx An Isbc Good condition