Used Dreher S 34/52 for sale (72,349)

Condition: used, machine/vehicle number: 12768, Rotor diameter: 340 mm Rotor width: 520 mm 4-knife rotor 2 rows of stator knives Kodpfx Ageyr Tq Eo Ajdu Infeed opening approx. 340 x 520 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Stator blade rows: 2 Kjdpfsyr Tmajx Ag Aedu Rotor width: 520 mm Rotor diameter: 340 mm Inlet dimensions: 500 x 350 mm

Condition: used, machine/vehicle number: K12936, Rotor diameter: 340mm Rotor width: 520mm Rotor blades: 5 rows Kdsdpfx Aoz N Iyyeg Aeu Stator blades: 2 rows Inlet cross-section: approx. 340 x 520mm Drive motor: 22kW

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm Kdodpfx Ajuqfa Ijg Aeu

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Kjdoz Enbbepfx Ag Aodu Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: reconditioned (used), Motor 5 kW electric height adjustment with digital display brake can be released electrically for knife change planer cutter shaft 520 mm manual feed speed 5-8-12-18 m/min start and stop buttons at front and rear Kdedpfxoy Hkzfs Ag Asu planer table length 2250 x 540 mm manually adjustable fence with angle function sliding planer shaft guard

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. It features a robust construction, a proven VEM 7.5 kW motor, and a three-phase 400 V power supply. Kedpfxsz Sk Duj Ag Aodu The machine has a large feed hopper, convenient service access, and a control cabinet with an emergency stop button. The installed low-speed three-phase motor provides high shredding power while maintaining stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Performance suitable for medium and large injection molding machines • German quality • Robust frame and blade construction In very good condition, mechanically inspected, and ready for operation.

Condition: used, machine/vehicle number: K11739, Rotor diameter: 150 mm Rotor width: 200 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 300 x 200 mm Kdsdpfx Aoz N Iyasg Aou Drive motor: 2.2 kW

Condition: used, machine/vehicle number: K12895, Rotor diameter: 260mm Rotor width: 410mm Rotor blades: 5 rows Stator blades: 2 rows Kdjdpfx Agoz N Iyte Aeu Infeed cross-section: approx. 2 pieces of 140 x 40mm Drive motor: 7.5kW Vacuum system for drawing in film edge strips

Condition: excellent (used), functionality: fully functional, Manufacturer: Dreher, Germany Model: 26/26 GFS Kdedeztfl Njpfx Ag Aeu Dimensions of the grinding chamber: 260 x 260 mm Power: 5.5 kW New blades 3 rotor blades 2 stator blades Additional sieve

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, WE OFFER AN SPINNER CNC TURNING AND MILLING LATHE. MACHINE IS COMES FROM 1.ST OWNER , MAKING PARTS FOR DOORS, WINDOWS-SMALL PARTS MACHINE COMEST WIT ALL TOOLINGS, BAR FEEDER IS NOT INCLUDED MACHINE WILL BE AWAILIBLE IMEDIATELY DIRECT FROM THE PRODUCTION. Kdjdpfxszbvthe Ag Aju

Condition: used, Year of construction: 1987, Uncoiler manufactured by DREHER, type 2380 F-FPS. Press force approximately --- tons. Year of manufacture 1994. Summary provided – a full technical translation will follow if required for this lot. Kodpfx Aszynmvjg Ajdu

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Ksdpey Egmuofx Ag Aedu Weight approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: good (used), functionality: fully functional, Mill with extraction system, sound-attenuating enclosure Kdodsvzzx Eopfx Ag Asu Power: 4 kW All functions tested and fully operational!

Condition: good (used), Year of construction: 2007, functionality: fully functional, Heidelberg PM 52-4 - 2007 Year of Manufacture : 2007 Impression Count : 71 mio imp. 4 colors offset press of size 37 x 52 cm equipped with: • CPC CLASSIC CENTER • AUTOPLATE • ALCOLOR dampening • BALDWIN Refrigeration • Automatic blanket and rollers WASHERS • Mediprint powder spray • Speed 13.000 Sheet per Hour Kjdez Dvmvjpfx Ag Aedu • Numbering and Perforating Unit Machine is available immediately.

Condition: used, machine/vehicle number: G11762, Rotor diameter: 200mm Rotor width: 100mm Rotor blades: 32 rows Stator blades: 1 row Kedpfx Agsz N Ix Nj Aodu Inlet cross-section: approx. 90 x 10mm Drive motor: 4.0 kW Mechanical feed device for extruder strands

Condition: used, machine/vehicle number: K12805, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 5 rows Stator blades: 2 rows Kdsdpsz N Iymofx Ag Aju Infeed cross-section: approx. 2 pieces, 10 x 120 mm Drive motor: 11 kW Mechanical infeed device for film edge strips

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision drive unit and heavy cast iron construction Front steel infeed roller with helical teeth for optimal feed rate Satin-finished steel outfeed roller, optionally with rubber roller on the outfeed side The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment is carried out via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard equipment includes two feed speeds, conveniently selectable from the operator's front Powerful industrial motor Stable steel/cast iron construction Equipment details: Worktable Mounted on four large spindles, ensuring maximum stability under all operating conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing required Planer knife changes in seconds Self-locking Motorized thickness table height adjustment in S 52 elite s Motorized height adjustment of the thickness table with electronic decimal display For greater precision and user-friendliness Dimensions and weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Dust extraction nozzle diameter (thicknessing) 120 mm Kdsdpfed Hx Hpjx Ag Aju Drive power Main motor 7 kW Installation information Space required (length) 1440 mm Space required (width/depth) 1071 mm Space required (height) 1088 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation of work area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Thicknessing Thickness table length 520 mm Thickness table width 850 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t Kedpfx Aezrpu Seg Aodu material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: good (used), Year of construction: 2007, operating hours: 130 h, machine/vehicle number: 208159, Size 36 x 52 cm, CP 2000, Alcolor dampening system, Baldwin cooling and recirculation unit, Autoplate, blanket washing system, roller washing system, impression cylinder washing system, Alphatronic powder spray. Kdedpfx Ajz Hm D Dsg Aou

Year of construction: 2001, operating hours: 126,000,000 h, condition: good (used), machine/vehicle number: 204750, Perfecting 2/2 - 4/0 CPC 1-04: Off Press Ink & Register Control Alcolor Dampening Semi Automatic Plate Change Grafix Alphatronic 200: Powder Sprayer Technotrans Cooling Device Automatic Ink Roller Washing Device Blanket Washing Device Staticstar Compact: Antistatic Device Ksdpfxslml Nhs Ag Aodu Impression Account: 126 Mio.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 719131, Heidelberg – GTO 52-1 Number of copies produced 8.350.000 Max-Sheet Size 360 x 520 mm (14.17 x 20.47 in) Max.printing Speed 8000 /h Dampening rollers –Direct Dampening Continuous-1 Kjdez Ny Dwepfx Ag Asdu Ink Fountain-Laser slit blade Electric equipment- 50Hz 380 V Electromechanical and ultrasonic double-sheet detectors Powder spray-WEKO T6 Circulation and cooling -Technotrans Alfa DS Availability immediately

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Kedpfx Asyr Tzksg Aedu Rotor knives: 3 Stator knives: 2 Infeed opening approx.: 410×600 mm Drive motor: approx. 11 kW

Condition: good (used), Year of construction: 2005, NEC Serial number: JA5L522D0729 FD1231H FOR ARBURG machines Year of manufacture: 2005 Ksdpfxozl Tbco Ag Aodu

Condition: used, machine/vehicle number: 12139, Rotor diameter: 260 mm Rotor width: 410 mm Kedpoyr Tndsfx Ag Asdu 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 400 x 500 mm Drive motor: 7.5 kW